Onkyo HTP-360, HT-S3105, HTP-318, HT-S3100, HT-R340 User Manual
5.1ch Home Theater System
HT-S3100
HT-S3105
AV Receiver (HT-R340)
Speaker Package
Contents
Introduction ..................................... 2
Connection .................................... 20
Turning On & First Time Setup..... 37
HTP-360
HTP-318 (European models)
(North American and Asian models)
Instruction Manual
Thank you for purchasing an Onkyo 5.1ch Home
Theater System. Please read this manual thoroughly
before making connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new 5.1ch Home Theater System.
Please retain this manual for future reference.
Basic Operation
Playing your AV components....... 39
Using the Tuner............................ 41
Enjoying the Listening Modes ..... 49
Advanced Operation..................... 51
Troubleshooting ............................ 58
Specifications................................ 62
E
n
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12.
Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
PORTABLE CART WARNING
S3125A
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen
into the apparatus,
C. If the apparatus has been exposed to rain or
water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in
any way, and
F. When the apparatus exhibits a distinct change in
performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus
through openings as they may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases shall be placed on the apparatus.
Don’t put candles or other burning objects on top of
this unit.
17. Batteries
Always consider the environmental issues and follow local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation,
such as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides
and 10 cm (4") at the rear. The rear edge of the shelf
or board above the apparatus shall be set 10 cm (4")
away from the rear panel or wall, creating a flue-like
gap for warm air to escape.
2
Precautions
1. Recording Copyright
only, recording copyrighted material is illegal without the permission of the copyright holder.
2. AC Fuse
serviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3. Care
over with a soft cloth. For stubborn stains, use a soft
cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards
with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 230–240 V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.
Some models have a voltage selector switch for
compatibility with power systems around the world.
Before you plug in such a model, make sure that the
voltage selector is set to the correct voltage for your
area.
Pressing the [STANDBY/ON] button to select
Standby mode does not fully shutdown the unit. If
you do not intend to use the unit for an extended
period, remove the power cord from the AC outlet.
5. Never Touch this Unit with Wet Hands
handle this unit or its power cord while your hands
are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Onkyo
dealer.
6. Handling Notes
• If you need to transport this unit, use the original
• Do not leave rubber or plastic items on this unit
• This unit’s top and rear panels may get warm
• If you do not use this unit for a long time, it may
—The AC fuse inside the unit is not user-
—Occasionally you should dust the unit all
packaging to pack it how it was when you originally bought it.
for a long time, because they may leave marks on
the case.
after prolonged use. This is normal.
not work properly the next time you turn it on, so
be sure to use it occasionally.
—Unless it’s for personal use
—Never
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For Canadian Models
NOTE:
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug:
CAUTION:
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
THIS CLASS B DIGITAL APPARATUS
TO PREVENT ELECTRIC SHOCK,
Modèle pour les Canadien
REMARQUE:
LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION:
TRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
CET APPAREIL NUMÉRIQUE DE
POUR ÉVITER LES CHOCS ÉLEC-
3
Precautions
—Continued
Speaker Precautions
For British models
Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by
qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
IMPORTANT
The plug is fitted with an appropriate fuse. If the fuse
needs to be replaced, the replacement fuse must
approved by ASTA or BSI to BS1362 and have the same
ampere rating as that indicated on the plug. Check for
the ASTA mark or the BSI mark on the body of the fuse.
If the power cord’s plug is not suitable for your socket
outlets, cut it off and fit a suitable plug. Fit a suitable
fuse in the plug.
For European Models
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.
GROEBENZELL, GERMANY
K. MIYAGI
ONKYO EUROPE ELECTRONICS GmbH
Memory Backup
The AV receiver uses a battery-less memory backup
system in order to retain radio presets and other settings
when it’s unplugged or in the case of a power failure.
Although no batteries are required, the AV receiver
must be plugged into an AC outlet in order to charge the
backup system. Once it has been charged, the AV
receiver will retain the settings for several weeks,
although this depends on the environment and will be
shorter in humid climates.
Placement
• The subwoofer cabinet is made out of wood and is
therefore sensitive to extreme temperatures and
humidity, do not put it in locations subject to direct
sunlight or in humid places, such as near an air conditioner, humidifier, bathroom, or kitchen.
• Do not put water or other liquids close to the speakers.
If liquid is spilled over the speakers, the drive units
may be damaged.
• Speakers should only be placed on sturdy, flat surfaces
that are free from vibration. Putting them on uneven or
unstable surfaces, where they may fall and cause damage, will affect the sound quality.
• Subwoofer is designed to be used in the upright vertical position only. Do not use it in the horizontal or
tilted position.
• If the unit is used near a turntable, CD player or DVD
player, howling or slipping of sound may occur. To
prevent this, move the unit away from the turntable,
CD player or DVD player, otherwise lower the unit’s
output level.
Using Close to a TV or Computer
TVs and computer monitors are magnetically sensitive
devices and as such are likely to suffer discoloration or
picture distortion when conventional speakers are
placed nearby. To prevent this, the SKF-360F/SKF318F and SKC-360C/SKC-318C feature internal magnetic shielding. In some situations, however, discoloration may still be an issue, in which case you should turn
off your TV or monitor, wait 15 to 30 minutes, and then
turn it back on again. This normally activates the
degaussing function, which neutralizes the magnetic
field, thereby removing any discoloration effects. If discoloration problems persist, try moving the speakers
away from your TV or monitor. Note that discoloration
can also be caused by a magnet or demagnetizing tool
that’s too close to your TV or monitor.
Do not place SKM-360S/SKM-318S close to TV or a
computer monitor because they have no magnetic shield.
Input Signal Warning
The speakers can handle the specified input power when
used for normal music reproduction. If any of the following signals are fed to them, even if the input power is
within the specified rating, excessive current may flow
in the speaker coils, causing burning or wire breakage:
1. Interstation noise from an untuned FM radio.
2. Sound from fast-forwarding a cassette tape.
3. High-pitched sounds generated by an oscillator,
electronic musical instrument, and so on.
4. Amplifier oscillation.
5. Special test tones from audio test CDs and so on.
6. Thumps and clicks caused by connecting or discon-
necting audio cables (Always turn off your amplifier
before connecting or disconnecting cables.)
7. Microphone feedback.
4
Features
HT-R340 AV Receiver
• 100 W/channel into 6 ohms (FTC)
• 100 W/channel into 6 ohms (DIN)
• 120 W/channel into 6 ohms (JEITA)
• Dolby*1 Digital and Dolby Pro Logic II
• DTS and DTS Neo:6*2 5.1
• Optimum Gain Volume Circuitry
• Massive High Current Power Supply (H.C.P.S.) transformer
• CinemaFILTER
• Non-Scaling Configuration
• A-Form — Auto Format Sensing
• OR-EQ (OptiResponse Equalizer)
• 192 kHz/24-bit D/A converters
•Powerful and highly accurate Analog Devices 32-bit
DSP processing
•3 digital inputs (2 optical, 1 coaxial)
• HDTV-ready component video switching (3 inputs, 1
output)
• Adjustable crossover (40/50/60/80/100/120/150/
200 Hz)
• Speaker A/B terminal
• Color-coded speaker terminal posts
• system control
• Compatible with RI Dock for iPod
• A/V Sync control function
*3
function
*4
HTP-360 Speaker Package
(North American and Asian model)
SKF-360F L/R 2-Way Front Speakers
SKC-360C 2-Way Center Speaker
(North American model)
• 3-1/4" (8 cm) cone woofer
• 3/4" (2 cm) ceramic tweeter
• Max. input power:120 W
• Magnetically shielded
• Color-coded speaker terminals and speaker cable
• 6-ohm impedance
SKC-360C 2-Way Center Speaker (Asian model)
• 3-1/4" (8 cm) cone woofer × 2
• 3/4" (2 cm) ceramic tweeter
• Max. input power:120 W
• Magnetically shielded
• Color-coded speaker terminals and speaker cable
• 6-ohm impedance
SKM-360S L/R Full-Range Surround Speakers
• 3-1/4" (8 cm) full-range speaker
• Max. input power:120 W
• 6-ohm impedance
• Color-coded speaker terminals and speaker cable
SKW-360 Bass Reflex Subwoofer
• 8" (20 cm) cone woofer
• Max. input power:130 W
• Color-coded speaker terminals and speaker cable
*1. Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are registered trademarks of Dolby Laboratories.
*2. “DTS” and “Neo:6” are trademarks of Digital Theater Sys-
tems, Inc.
*3. OptiResponse, and OR-EQ are trademarks of Onkyo Cor-
poration.
*4. Apple and iPod are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
HTP-318 Speaker Package
(European model)
SKF-318F L/R 2-Way Front Speakers
SKC-318C 2-Way Center Speaker
• 3-1/4" (8 cm) cone woofer
• 3/4" (2 cm) ceramic tweeter
• Max. input power:120 W
• Magnetically shielded
• Color-coded speaker terminals and speaker cable
• 6-ohm impedance
SKM-318S L/R Full-Range Surround Speakers
• 3-1/4" (8 cm) full-range speaker
• Max. input power:120 W
• 6-ohm impedance
• Color-coded speaker terminals and speaker cable
SKW-318 Bass Reflex Subwoofer
• 8" (20 cm) cone woofer
• Max. input power:130 W
• Color-coded speaker terminals and speaker cable
5
Contents
Package Contents
Introduction
Important Safety Instructions ................ 2
Precautions ............................................. 3
Speaker Precautions .............................. 4
Features ................................................... 5
Package Contents................................... 6
Front & Rear Panels................................ 8
Speaker Package .................................. 11
Remote Controller................................. 12
Before Using the AV receiver................. 19
Connection
Enjoying Home Theater........................ 20
Connecting Your Speakers .................. 21
Connecting Antenna............................. 24
Connecting Your Components .............. 26
Turning On & First Time Setup
Turning On............................................. 37
First Time Setup.................................... 38
Make sure you have the following items:
AV Receiver HT-R340
HT-R340
Remote controller & two batteries (AA/R6)
(American type shown)
Indoor FM antenna
(Connector type varies from country to country.)
Basic Operation
Playing Your AV Components ............. 39
Using the Tuner..................................... 41
Common Functions .............................. 45
Recording .............................................. 48
Enjoying the Listening Modes
Using the Listening Modes .................. 49
Advanced Operation
Adjusting the Listening Modes............ 51
Advanced Setup.................................... 53
Troubleshooting.....................................58
If you can’t resolve an issue, try resetting the AV
receiver by holding down the [VIDEO 1] button
and pressing the [STANDBY/ON] button.
Specifications ........................................62
AM loop antenna
Power-plug adapter
Only supplied in certain countries. Use this adapter if
your AC outlet does not match with the plug on the AV
receiver’s power cord. (Adapter varies from country to
country.)
* In catalogs and on packaging, the letter at the end of the
product name indicates the color. Specifications and operation are the same regardless of color.
6
Package Contents
—Continued
Speaker Package HTP-360
(North American and Asian models)
Front speakers
(SKF-360F L/R)
Center speaker
(SKC-360C)
Surround speakers
(SKM-360S L/R)
Subwoofer (SKW-360)
Speaker Package Accessories
(Red) (White) (Green)
Speaker cable for front speakers and center speaker
11 ft. (3.5 m)
(Blue) (Gray)
Speaker cables for surround speakers 30 ft. (9 m)
(Purple)
Speaker cables for subwoofer 15 ft. (4.5 m)
16 thin rubber stoppers, 12 thick rubber stoppers
Speaker Package HTP-318
(European models)
Front speakers
(SKF-318F L/R)
Center speaker
(SKC-318C)
Surround speakers
(SKM-318S L/R)
Subwoofer (SKW-318)
4 floor pads for the subwoofer
7
Front & Rear Panels
Front Panel
North American and Asian Models
1
STANDBY/ON
A SPEAKERS B
PHONES
European Models
STANDBY/ON
2
3 4 5 7 8 9 J K L M6
STANDBY
+
TONE
MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD
STEREO
LISTENING MODE
DISPLAY
DIGITAL INPUT
DIMMER MEMORY
QN O P R S
9
STANDBY
TUNING MODE
CLEAR
TUNING / PRESET
ENTER
RETURN
TUNING / PRESET
ENTER
MASTER VOLUME
SETUP
MASTER VOLUME
A SPEAKERS B
PHONES
MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD
+
TONE
STEREO
LISTENING MODE
For detailed information, see the pages in parentheses.
STANDBY/ON button (37)
A
This button is used to set the AV receiver to On or
Standby.
STANDBY indicator (37)
B
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
C
Remote-control sensor (19)
This sensor receives control signals from the remote
controller.
D
STEREO button (49)
This button is used to select the Stereo listening
mode.
E
LISTENING MODE [ ]/[ ] buttons (49)
These buttons are used to select the listening modes.
DISPLAY
RETURN
DIGITAL INPUT
F
RT/PTY/TP MEMORY
Display
TUNING MODE
CLEAR
SETUP
See “Display” on page 9.
G
DISPLAY button (40)
This button is used to display various information
about the currently selected input source.
H
DIGITAL INPUT button (38, 57)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
I
DIMMER or RT/PTY/TP button (44, 45)
This button is used to adjust the display brightness.
On the European model, this is the RT/PTY/TP but-
ton, and it’s used with RDS (Radio Data System).
See “Using RDS (European models only)” on
page 43.
8
Front & Rear Panels
—Continued
MEMORY button (42)
J
This button is used when storing or deleting radio
presets.
K
TUNING MODE button (41)
This button is used to select the Auto or Manual tuning mode.
L
Arrow/TUNING/PRESET & ENTER buttons
(51, 53–56)
When the AM or FM input source is selected, the
TUNING [ ] [ ] buttons are used to tune the
tuner, and the PRESET [ ] [ ] buttons are used
to select radio presets (see pages 41, 42). When the
setup menus are used, they work as arrow buttons
and are used to select and set items. The ENTER
button is also used with the setup menus.
M
MASTER VOLUME control (39)
This control is used to adjust the volume of the AV
receiver.
Display
PHONES jack (45)
N
This 1/4-inch phone jack is for connecting a standard pair of stereo headphones for private listening.
O
SPEAKERS A & B buttons (39)
These buttons are used to turn speaker sets A and B
on or off.
P
TONE, [–] & [+] buttons (45)
These buttons are used to adjust the bass and treble.
Q
Input selector buttons (38–40)
These buttons are used to select from the following
input sources: MULTI CH, DVD, VIDEO 1/VCR,
VIDEO 2, VIDEO 3, TAPE, TUNER, or CD.
The [MULTI CH] button selects the DVD analog
multichannel input.
R
RETURN button (51, 53, 54, 56)
This button is used to return to the previously displayed setup menu.
S
SETUP button (51, 53–56)
This button is used to access various settings.
2134
5
For detailed information, see the pages in parentheses.
1
A & B speaker indicators (20, 39)
Indicator A lights up when speaker set A is on. Indicator B lights up when speaker set B is on.
MUTING indicator (46)
2
This indicator flashes when the AV receiver is
muted.
Source/listening mode indicators (50, 57)
3
These indicators show the currently selected listening mode and digital audio format.
Tuning indicators
4
TUNED (41):
receiver is tuned to a radio station.
AUTO (41):
Tuning is selected and disappears when Manual
Tuning is selected.
This indicator lights up when the AV
This indicator lights up when Auto
6
RDS (European model only) (43):
tor lights up when the AV Receiver is tuned to a
radio station that supports RDS (Radio Data System).
MEMORY (42):
setting radio stations.
FM STEREO (41):
the AV receiver is tuned to a stereo FM station.
5
SLEEP indicator (46)
This indicator lights up when the Sleep function has
been set.
6
Message area
This area of the display shows various information
about the currently selected source.
This indicator lights up when pre-
This indicator lights up when
This indica-
9
Front & Rear Panels
—Continued
Rear Panel
1 B 3 4 5 876
9 J K L M
DIGITAL IN OPTICAL 1, 2 & COAXIAL
A
These optical and coaxial jacks can be used to connect a CD or DVD player and other components
with digital audio outputs.
COMPONENT VIDEO
B
A DVD player, TV, or other component that supports component video can be connected here.
AM ANTENNA
C
These push terminals are for connecting an AM
antenna.
FM ANTENNA
D
This jack is for connecting an FM antenna.
MONITOR OUT
E
The composite video output should be connected to
a video input on your TV or projector.
FRONT SPEAKERS B
F
These push terminals are for connecting speaker
set B.
G
FRONT SPEAKERS A, SURROUND
SPEAKERS, CENTER SPEAKER &
SUBWOOFER SPEAKER
These push terminals are for connecting speaker
set A.
VOLTAGE SELECTOR (only some models)
H
This voltage selector provides compatibility with
power systems around the world.
I
This (Remote Interactive) jack can be connected to the jack on another Onkyo compo-
nent. The AV receiver’s remote controller can then
be used to control that component.
To use , you must make an analog audio connection (RCA) between the AV receiver and the other
component, even if they are connected digitally.
Note:
can only be used with Onkyo components.
J
CD IN
These analog inputs can be used to connect a CD
player with analog outputs.
TAPE IN/OUT
K
These analog inputs and outputs can be used to connect a cassette recorder, MiniDisc recorder, or other
recorder with analog inputs and outputs.
VIDEO 1 IN/OUT, VIDEO 2 IN & VIDEO 3 IN
L
The VIDEO 1, composite video, and audio inputs
and outputs can be used to connect a VCR. The
VIDEO 2, VIDEO 3, composite video, and audio
inputs can be used to connect another video source
(e.g., cable TV, satellite TV, or a set-top box).
DVD IN
M
The FRONT, SURROUND, CENTER, and SUBWOOFER jacks can be used to connect a component with an analog multichannel audio output, such
as a DVD player with a 5.1-channel analog output.
The composite video input should be connected to a
video output on the DVD player.
See pages 20–36 for connection information.
10
Speaker Package
Front, Center, Surround, & Subwoofer speakers (SKF-360F/SKF-318F,
SKC-360C/SKC-318C, SKM-360S/SKM-318S, SKW-360/SKW-318)
■ Rear
SKF-360F/SKM-360S
SKF-318F/SKM-318S
2
2
3
3
1
2
22
SKC-360C/SKC-318C
SKW-360/SKW-318
1
3 1
A Speaker terminals
These push terminals are for connecting the speaker
to the HT-R340 with the supplied speaker cables.
The supplied speaker cables are color-coded for
easy identification. Simply connect each cable to the
same-colored positive speaker terminal.
B Keyhole slots
These keyhole slots can be used to wall-mount the
speaker. See page 22 for mounting instructions.
1
C Speaker mount/bracket inserts
These threaded inserts can be used to attach the
speaker to a speaker mount or bracket. See page 22
for mounting instructions.
Note:
Use commercially available machine screws to
attach the speaker to a speaker mount or bracket.
North American models require 1/4-inch screws.
Other models require M5 (5 mm) screws.
Caution:
The front grilles are not designed to be removed so
do not attempt to remove them forcibly, as this will
damage them.
11
Remote Controller
How to Use the Remote Controller
Including the AV receiver, the remote controller can be
used to control up to six different components. The
remote controller has a specific operating mode for use
with each type of component. Modes are selected by
using the five REMOTE MODE buttons.
■
RECEIVER/TAPE Mode
In RECEIVER/TAPE mode, you can control
the AV receiver and an Onkyo cassette
recorder connected via .
■
DVD, CD, MD, CDR & HDD Modes
With these modes, you can control an Onkyo
DVD player and CD/MD/CDR/HDD
player/recorder.
Use the REMOTE MODE buttons to select
1
a mode.
Use the buttons supported by that mode
2
to control the component.
RECEIVER mode: see right column
DVD mode: see page 14
CD mode: see page 15
MD/CDR mode: see page 16
HDD mode: see page 17
TAPE mode: see page 18
Note:
Some of the remote controller operations described in
this manual may not work as expected with other components.
RECEIVER
TAPE
DVD
C
D
MD
CDR
HDD
RECEIVER Mode
RECEIVER mode is used to control the AV receiver.
To set the remote controller to RECEIVER mode,
press the [RECEIVER] REMOTE MODE button.
RECEIVER
TAPE
L
M
N
O
P
Q
A
2
3
4
5
6
7
8
9
J
K
ON/STANDBY
INPUT SELECTOR
123
V1V2V
456
789
+
10
--/---
TOP MENU
SP A / B
PLAYLIST PLAYLIST
STEREO
AUDIO REPEAT
TEST TONE
DISPLAY
MULTI CH
0
DIMMER SLEEP
ENTER
LISTENING MODE
SURROUND
RANDOM
SUBTITLE
CH SEL
PLAY MODE
OR-EQ
REMOTE MODE
RECEIVER
TAPE
3
DVD
C DTAPE TUNER
CLR
CH
DISC
ALBUM
-
LEVEL
L NIGHT
DVD
C D
MD
CDR
HDD
VOL
MENU
MUTING
SETUPRETURN
LEVEL
CINE FLTR
+
R
-
646S
RC
S
12
Remote Controller
—Continued
For detailed information, see the pages in parentheses.
A
ON/STANDBY button (37)
This button is used to set the AV receiver to On or
Standby.
INPUT SELECTOR buttons (39)
B
These buttons are used to select the input sources.
C
MULTI CH button (40)
This button is used to select the multichannel DVD
input.
D
DIMMER button (45)
This button is used to adjust the display brightness.
E
CH +/– button (42)
This button is used to select radio presets.
SP A/B button (39)
F
This button is used to turn speaker sets A and B on
or off.
Arrow [ ]/[ ]/[ ]/[ ] & ENTER buttons
G
(51, 53–56)
These buttons are used to select and adjust settings.
RETURN button (51, 53, 54, 56)
H
This button is used to return to the previous display
when changing settings.
LISTENING MODE buttons (49)
I
These buttons can be used to select listening modes
regardless of the currently selected remote controller mode.
STEREO button
This button selects the Stereo listening mode.
SURROUND button
This button selects the Dolby and DTS listening
modes.
[ ]/[ ] buttons
These buttons can be used to select any of the available listening modes.
J
TEST TONE, CH SEL, LEVEL- & LEVEL+
buttons (37, 47, 54)
These buttons are used to adjust the level of each
speaker.
DISPLAY button (40)
K
This button is used to display various information
about the currently selected input source.
REMOTE MODE buttons (12)
L
These buttons are used to select the remote controller modes. When you press a button on the remote
controller, the REMOTE MODE button for the currently selected mode lights up.
M
SLEEP button (46)
This button is used to set the Sleep function.
N
VOL [ ]/[ ] button (39)
This button can be used to adjust the volume of the
AV receiver regardless of the currently selected
remote controller mode.
MUTING button (46)
O
This button is used to mute the AV receiver.
SETUP button (51, 53–56)
P
This button is used to access various settings.
Q
CINE FLTR button (52)
This button is used to set the CinemaFILTER function.
R
L NIGHT button (52)
This button is used to set the Late Night function.
S
OR-EQ button (46)
This button is used to turn on the OptiResponse
Equalizer, which optimizes performance when the
HT-R340 is used with the speakers included in the
HTP-360/HTP-318 Home Theater Speaker Package. When the OptiResponse Equalizer is on, you
can enjoy a powerful sound with movies or music
even at low volume levels.
13
Remote Controller
—Continued
DVD Mode
To select your DVD player as the input source, press:
RECEIVER
6
DVD
To set the remote controller to DVD mode, press the
[DVD] REMOTE MODE button.
1
2
3
4
5
6
ON/STANDBY
INPUT SELECTOR
123
V1V2V
456
789
+
10
--/---
TOP MENU
SP A / B
PLAYLIST PLAYLIST
RECEIVER
MULTI CH
0
DIMMER SLEEP
ENTER
REMOTE MODE
DVD
TAPE
C D
3
MD
DVD
CDR
C DTAPE TUNER
HDD
CLR
CH
DISC
VOL
ALBUM
MENU
MUTING
SETUPRETURN
DVD
K
L
M
7
LISTENING MODE
SURROUND
8
9
J
STEREO
RANDOM
SUBTITLE
AUDIO REPEAT
TEST TONE
CH SEL
PLAY MODE
DISPLAY
OR-EQ
LEVEL
L NIGHT
-
LEVEL
CINE FLTR
+
N
O
P
-
646S
RC
A
ON/STANDBY button
This button sets the DVD player to On or Standby.
B
Number buttons
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating specific points in time.
C
DISC +/– button
This button selects discs on a DVD changer.
D
TOP MENU button
This button is used to select a DVD’s top menu.
E
Arrow [ ]/[ ]/[ ]/[ ] & ENTER buttons
These buttons are used to navigate DVD menus and
the DVD player’s onscreen setup menus.
F
RETURN button
This button is used to exit the DVD player’s
onscreen setup menu and to restart menu playback.
G
Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous, and Next.
H
SUBTITLE button
This button is used to select subtitles.
AUDIO button
I
This button selects foreign language soundtracks
and audio formats (e.g., Dolby Digital or DTS).
DISPLAY button
J
This button is used to display information about the
current disc, title, chapter, or track on the DVD
player’s display, including the elapsed time, remaining time, total time, and so on.
K
CLR button
This button is used to cancel functions and to clear
entered numbers.
L
MENU button
This button is used to display a DVD’s menu.
M
SETUP button
This button is used to access the DVD player’s
onscreen setup menus.
N
RANDOM button
This button is used with the random playback function.
O
REPEAT button
This button is used to set the repeat playback functions.
P
PLAY MODE button
This button is used to select play modes on a component with selectable play modes.
14
Remote Controller
—Continued
CD Mode
To select your CD player as the input source, press:
RECEIVER
To set the remote controller to CD mode, press the
[CD] REMOTE MODE button.
ON/STANDBY
1
INPUT SELECTOR
2
123
V1V2V
456
MULTI CH
789
+
0
10
--/---
DIMMER SLEEP
3
REMOTE MODE
DVD
RECEIVER
TAPE
3
DVD
CDR
C DTAPE TUNER
HDD
CLR
CH
DISC
VOL
ALBUM
9
C D
C D
MD
C D
6
✽
A
ON/STANDBY button
This button sets the CD player to On or Standby.
B
Number buttons
These buttons are used to enter track numbers and
to enter times for locating specific points in time.
C
DISC +/– button
This button selects discs on a CD changer.
Playback buttons
D
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous and Next.
DISPLAY button
E
This button is used to display information about the
current disc or track on the CD player’s display,
including the elapsed time, remaining time, total
time, and so on.
F
CLR button
This button is used to cancel functions and to clear
entered numbers.
G
RANDOM button
This button is used with the random playback function.
H
REPEAT button
This button is used to set the repeat playback functions.
✽
The VOL [ ]/[ ] and LISTENING MODE buttons work the same as for RECEIVER mode.
4
✽
5
TOP MENU
RANDOM
LEVEL
L NIGHT
-
646S
MUTING
SETUPRETURN
-
LEVEL
CINE FLTR
SP A / B
ENTER
PLAYLIST PLAYLIST
LISTENING MODE
SURROUND
STEREO
SUBTITLE
AUDIO REPEAT
TEST TONE
CH SEL
PLAY MODE
DISPLAY
OR-EQ
RC
MENU
+
8
7
15
Remote Controller
—Continued
MD, & CDR Mode
To select your MiniDisc or CD recorder as the input
source, press:
RECEIVER
7
TAPE
*You must change the Input Display (see page 38).
To set the remote controller to MD or CDR mode,
press the [MD] or [CDR] REMOTE MODE button.
ON/STANDBY
1
INPUT SELECTOR
2
123
V1V2V
456
MULTI CH
789
+
0
10
--/---
DIMMER SLEEP
MD or CD recorder
REMOTE MODE
DVD
RECEIVER
TAPE
C D
3
MD
DVD
CDR
C DTAPE TUNER
HDD
CLR
CH
DISC
VOL
ALBUM
MD
CDR
5
✽
A
ON/STANDBY button
This button sets the MD/CD recorder to On or
Standby.
B
Number buttons
These buttons are used to enter track numbers and
to enter times for locating specific points in time.
The [+10] button is used to enter numbers above 10.
C
Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous and Next.
D
DISPLAY button
This button is used to display information about the
current disc or track on the MD/CD recorder’s display, including the elapsed time, remaining time,
total time, and so on.
CLR button
E
This button is used to cancel functions and to clear
entered numbers.
RANDOM button
F
This button is used with the random playback function.
REPEAT button
G
This button is used to set the repeat playback functions.
PLAY MODE button
H
This button is used to select play modes on a component with selectable play modes.
3
✽
4
TOP MENU
RANDOM
LEVEL
L NIGHT
-
646S
MUTING
SETUPRETURN
-
LEVEL
CINE FLTR
SP A / B
ENTER
PLAYLIST PLAYLIST
LISTENING MODE
SURROUND
STEREO
SUBTITLE
AUDIO REPEAT
TEST TONE
CH SEL
PLAY MODE
DISPLAY
OR-EQ
RC
MENU
✽
The VOL [ ]/[ ] and LISTENING MODE buttons work the same as for RECEIVER mode.
6
+
7
8
16
Remote Controller
—Continued
HDD Mode
HDD mode is for controlling an Apple iPod in an Onkyo
RI Dock that’s connected via .
To select an Onkyo RI Dock that’s connected via
as the input source, press:
RECEIVER
*You must change the Input Display (see page 38).
See page 34 for more information.
To set the remote controller to HDD mode, press the
[HDD] REMOTE MODE button.
ON/STANDBY
1
INPUT SELECTOR
123
V1V2V
456
MULTI CH
789
+
0
10
--/---
DIMMER SLEEP
7
TAPE
REMOTE MODE
RECEIVER
TAPE
3
DVD
C DTAPE TUNER
CLR
or
DVD
C D
MD
CDR
HDD
3
V
3
HDD
A
ON/STANDBY button
This button sets the iPod to On or Standby.
B
ALBUM +/– button
This button selects the next or previous album on an
iPod.
C
PLAYLIST [ ]/[ ] buttons
These buttons select the previous or next playlist on
the iPod.
D
Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse,
Fast Forward, Previous and Next.
E
DISPLAY button
This button turns on the iPod’s display for 30 seconds.
F
MENU, ENTER, and Up and Down [ ]/[ ]
buttons
MENU button:
[ ]/[ ] buttons:
Displays the iPod’s menu.
Select options on the iPod’s
menu.
ENTER button:
Confirms the selection on the
iPod’s menu.
G
RANDOM button
This button is used with the random playback function.
H
REPEAT button
This button is used to set the repeat playback functions.
2
3
4
5
CH
DISC
ALBUM
TOP MENU
ENTER
RANDOM
-
646S
LEVEL
L NIGHT
MUTING
-
SP A / B
PLAYLIST PLAYLIST
LISTENING MODE
SURROUND
STEREO
SUBTITLE
AUDIO REPEAT
TEST TONE
CH SEL
PLAY MODE
DISPLAY
OR-EQ
RC
VOL
MENU
SETUPRETURN
LEVEL
CINE FLTR
6
7
+
8
17
Remote Controller
—Continued
TAPE Mode
To select your Cassette deck as the input source,
press:
RECEIVER
TAPE mode is used to control an Onkyo cassette
recorder connected to the AV receiver via .
To set the remote controller to TAPE mode, press the
[RECEIVER] REMOTE MODE button.
For twin cassette decks, only deck B can be controlled.
7
TAPE
A
Play [ ] button
This button is used to start playback.
B
Stop [ ] button
This button is used to stop playback.
C
Reverse Play [ ] button
This button is used to start reverse playback.
D
Rewind & FF [ ]/[ ] buttons
The Rewind [ ] button is used to start rewind. The
FF [ ] button is used to start fast forward.
ON/STANDBY
INPUT SELECTOR
123
V1V2V
456
789
+
10
--/---
TOP MENU
SP A / B
PLAYLIST PLAYLIST
STEREO
AUDIO REPEAT
TEST TONE
DISPLAY
MULTI CH
0
DIMMER SLEEP
ENTER
LISTENING MODE
SURROUND
RANDOM
SUBTITLE
CH SEL
PLAY MODE
OR-EQ
REMOTE MODE
RECEIVER
TAPE
3
DVD
C DTAPE TUNER
CLR
CH
DISC
ALBUM
-
LEVEL
L NIGHT
DVD
C D
MD
CDR
HDD
VOL
MENU
MUTING
SETUPRETURN
LEVEL
CINE FLTR
RECEIVER
TAPE
A
B
C
D
+
18
-
646S
RC
Before Using the AV receiver
Setting the Voltage Selector (on some models)
Some models have a voltage selector switch for compatibility with power systems around the world. Before you
plug in this model, make sure that the voltage selector is
set to the correct voltage for your area. If it isn’t, use a
small screwdriver to set it as appropriate. For example, if
the voltage in your area is 120 volts, set the selector to
“120V.” If it’s between 220 and 240 volts, set it to “220240V.”
Installing the Batteries
To open the battery compartment, press
1
the small hollow and slide open the cover.
Notes:
• If the remote controller doesn’t work reliably, try
replacing the batteries.
• Don’t mix new and old batteries or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent damage from
leakage or corrosion.
• Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion.
Using the Remote Controller
To use the remote controller, point it at the AV receiver’s
remote control sensor, as shown below.
Remote control sensor
AV receiver
STANDBY indicator
Approx. 16 ft.
(5 m)
Insert the two supplied batteries (AA/R6)
2
in accordance with the polarity diagram
inside the battery compartment.
Slide the cover shut.
3
Notes:
• The remote controller may not work reliably if the AV
receiver is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in
mind when installing.
• If another remote controller of the same type is used in
the same room, or the AV receiver is installed close to
equipment that uses infrared rays, the remote controller may not work reliably.
• Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.
• The remote controller may not work reliably if the AV
receiver is installed in a rack behind colored glass
doors. Keep this in mind when installing.
• The remote controller will not work if there’s an obstacle between it and the AV receiver’s remote control
sensor.
19
Enjoying Home Theater
Speaker Sets A and B
You can use two sets of speakers with the AV receiver:
Speaker set A
*While speaker set B is on, speaker set A is reduced to 2.1-channel playback.
Speaker set B
AV receiver
A SPEAKERS B
Center speaker (SKC-360C)
This speaker enhances the front left and right speakers,
making sound movements distinct and providing a full
sound image. For movies it’s used mainly for dialog.
Position it close to your TV facing forward at about ear
level, or at the same height as the front left and right
speakers.
* While speaker set B is on, this speaker outputs no
should be used in your main listening room for up to 5.1-channel playback.
can be used in another room and offers 2-channel stereo playback.
Speaker set A Speaker set B Indicator Output
Remote
controller
or
SP A / B
sound.
On
Off
speaker set A
On
Off Set A: 5.1 channels
On Set B: 2 channels
Off No sound
and
speaker set B
A B
.
Set A: 2.1 channels
Set B: 2 channels
A
B
Speaker Set A: Main Room
Front left and right speakers
(SKF-360F L/R)
These output the overall sound. Their
role in a home theater is to provide a
solid anchor for the sound image. They
should be positioned facing the listener
at about ear level, and equally spaced
from the TV. Angle them inward.
Subwoofer (SKW-360)
The subwoofer handles the bass sounds
of the LFE (Low-Frequency Effects)
channel. In general, a good bass sound
can be obtained by installing the subwoofer in a front corner, or at one-third
the way along the wall, as shown.
1/3 of wall
position
Speaker Set B: Sub Room
HTP-360 speaker
package is shown
Corner
position
Surround left and right speakers (SKM-360S L/R)
These speakers are used for precise sound positioning and to add realistic ambience. Position them at the
sides of the listener, or slightly behind, about 2–3 feet
(60–100 cm) above ear level. Ideally they should be
equally spaced from the listener.
* While speaker set B is on, these speakers output no
sound.
20
Loading...