One for All URC-9990 User Manual
Universal Touch Screen Remote . . . . . . . . . . . . . P.2
URC-9990
F
D
UK
User guide p.2
Bedienungsanleitung S.44
Mode d’emploi p.86
ONE FOR ALL MOSAIC URC-9990
DD-0201
701571
Table Of Contents
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INSTALLING BATTERIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
LOW-BATTERY INDICATOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
USING THE TOUCH SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DEVICE SET-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B
Y BRAND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B
Y SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
B
Y CODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
D
ELETE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
N
EW CODES (IN CASE OF UPGRADE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PERSONALIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M
ACROS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
M
OVE KEY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
L
EARN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
L
ABEL KEYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
K
EY MAGIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
V
OLUME LOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
V
IEW/DELETE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
H
OME THEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SYSTEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
U
PGRADE (ADDING NEW CODES) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
S
OUND ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
L
OCK SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
U
SER RESET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
L
ANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
A
BOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
CUSTOMER SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T
ELEVISION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
V
IDEO RECORDERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
S
ATELLITE RECEIVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
C
ABLE CONVERTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
V
IDEO ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
CD/M
INI DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
P
HONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
H
OME AUTOMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
A
MPLIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
A
MP/TUNERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
C
ASSETTE PLAYERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
L
ASER DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
D
AT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
D
VD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
2 www.oneforall.com
www.oneforall.com 3
Introduction
Your ONE FOR ALL MOSAIC is designed to let you use one remote to operate your Video and Audio
equipment;any device designed to be operated by an infrared signal.This also includes those devices
which operate over 100 kHz.You can choose any combination of 15 devices you would like to operate.
The ONE FOR ALL MOSAIC comes available with the world’s largest and most efficient database of
infrared codes for device compatibility.It is further enhanced by ONE FOR ALL’s patented upgradeability. Also,what makes the MOSAIC even more unique is the "Learning" feature which allows you
to customise any of the special functions ofyour original remote control onto the keypad of your new
ONE FOR ALL.
The following pages explain in simple steps how to customize the ONE FOR ALL MOSAIC to your
home entertainment needs.
Installing Batteries
Your MOSAIC needs 4 new "AA/LR6" alkaline batteries .
1. Remove the battery cover from the back of the ONE
FOR ALL MOSAIC by pressing down on the tab.
2. Match the batteries to the + and – marks inside the
battery case,then insert the batteries.
3. Press the batter y cover back in place.
Low-Battery Indicator
Whenever the batteries need replacement,
the MOSAIC will emit a "beep sound" (even ifthe
sound is turned off).The MOSAIC will indicate this
as well on the top portion of the screen with a
"Battery Low" message.
At this point,only the control functions will work
and all of the MOSAIC’s DEVICE SETUP and PER-
SONALIZATION parameters will be disabled to prevent ac c i d e ntal l o s s o f any e nte red com mand s
should the batteries run out.
Simply replace the batteries as soon as possible.
Press any IR key and the MOSAIC will be restored
to its full functionality, complete with your favourite
settings.
Low Battery
Indicator
1 2 3
4 5 6
7 8 9
0
-/--
AV PWR
CBLTV VCR
THEATERSetup
|| Battery Low ||
Using the touch screen
MOSAIC features a Touch Screenthat respond s to touc h
commands,whether you use the supplied Stylus or your
finger tip.Each time you tap on the screen, you’ll see the
LED blink and hear a beep tone,which serve as visual
and audio confirmation of your command.
After 20 seconds ofinactivity,MOSAIC will tur n off the
LCD screen to conserve battery life.
NOTE:By pressing the ? key you will obtain additional infor mation about
the displayed menu.
1 2 3
4 5 6
7 8 9
0
-/--
AV PWR
CBLTV VCR
THEATERSetup
R
URC - 9990
1 2 3
4 5 6
7 8 9
0
-/--
AV PWR TV/VCR PWR
CBLTV VCR CBLTV VCR
THEATERSetup THEATERSetup
Tap on
next
device.
Current
active
device
Current
active
device
Tap on scroll arrow
to see other devices.
Remote Control
Keys for active
device
Tap on pages
to see more
Remote Control
Keys.
Phono Jack
(for future
computer
connection)
Stylus
and
Housing
IR Signal
Emitters
Piezo Speaker
(for Audio
Confirmation)
Contrast
Control
(for
Touch Screen)
Battery
Cover
Tab
(to release
Battery Cover)
IR Learning
Eye
R
URC - 9990
LED
(for Visual Confirmation)
VOLUME
Up/Down
MUTE
On/Off
Touch Screen
(Soft Keys)
(Hard Keys)
BACKLIGHT
On/Off
CHANNEL
Up/Down
4 www.oneforall.com
Device Setup
BY BRAND
The easiest way to add devices to MOSAIC is to perform a setup by manufacturer brand.With this
method you select a device to add,select the brand you own,and MOSAIC automatically finds the
correct manufacturer’s code to correctly control the device.
Example:to Set-Up your Video Recorder (brand: Nokia):
NOTE:To return to a previous menu,tap on the ESCkey.To return to last-displayed Device
Screen,press down on ESC or MUTE for at least 2 seconds.For help,tap the ? key.
1 2 3
4 5 6
7 8 9
0
-/--
AV PWR
THEATERSetup
Tap on
CBL
VCR
DEVICE SETUP
PERSONALIZATION
SYSTEM
SETUP
Welcome to Setup!
What would you like to configure?
Esc ?
Tap on
BY BRAND
BY SEARCH
BY CODE
DELETE
DEVICE SETUP
Welcome to Device Setup!
What method
would you like to use?
Esc ?
Tap on
CBL SATTV
DVD LDVCR
AMP CDTUN
DAT PHOTAPE
HOMEV.ACC
BRAND SET
Select the device.
Esc
Tap on
OTHER
A-E F-M N-R S-ZA-E
ASAAdventura
AVP
Adelsound
Adventura
Adyson
Aiwa
Akai
Akiba
Akura
Alba
BRAND SET
VCR
Use the letters or the bar
to scroll to your brand.
Esc OK
Scroll
Bars
Alphabet Keys
OTHER
A-E F-M
S-Z
F-MN-R
NEC
Neckermann
Nesco
Nikkia
Nokia
Nordmende
Oceanic
Okano
Olympus
Optimus
BRAND SET
VCR
Use the letters or the bar
to scroll to your brand.
Esc OK
First,
tap on
brand
Then, tap on
www.oneforall.com 5
• To relabel the device key,tap on the YES key and you will see the LABEL Menu (see explanation
on page 25 step 6).
• To keep the label the same,tap on the NO key.
You wi ll see a confirmation screen that says the key has been successfully programmed.To
program another device,tap on the ESC key.To return to the Device Screen,press on ESC or
MUTE for at least 2 seconds.
To test remote control ofthe newly-added device,tap on its key on the Device Selection Strip.Try
using the Hard Keys to adjust volum e a nd chan ge cha n nels . Try tapping on th e Page Arrows to acce ss
other remote control functions and then try tapping on the soft keys on each page to test them.
NOTE:Remember to press the correct device key before operating your device.Only one device
(CD,amplifier,cassette,etc.) can be assigned to a device key. If your original remote operates
more than one dev ice (for example,a receiver, CD player and cassette player in one remote),
you need to set up each device separately.
6 www.oneforall.com
Test
1
PWR
VCR 1
VCR 2
VCR 3
VCR 4
VCR 5
VCR 6
BRAND SET
Nokia
Your brand has multiple
types; use the scroll bars
to try each one in turn.
Esc OK
ADD
REPLACE
BRAND SET
Would you like to
ADD the device or REPLACE
it with an existing one?
Esc ?
Tap on
if 1st VCR
Tap on
if 2nd VCR
Press OK to confirm.
BRAND SET
Esc OK
CBL VCR VCR
Tap on
Relabel the device?
BRAND SET
CBL VCR VCR
YES NO
SETUP BY SEARCH
As an alternative method,you can use MOSAIC’s search program to find the correct manufacturer’s
codes to set up your entertainment devices.With this method you first select a device you want to
add,then you perform a code test,advancing through one or more ty pes,to find the one that works.
Example:to use the search method for your television:
Tap on the OK key to confirm your choice.MOSAIC will ask if you want to relabel the newly-added
device.
• To relabel it,tap on the YES key and you will see the LABEL Menu (see explanation on page 25
step 6).
• To keep the label the same,tap on the NO key.
You wi ll see a confirmation screen that says the key has been successfully programmed.To
program another device,tap on the ESC key.To return to the Device Screen,press on ESC or
MUTE for at least 2 seconds.
To test remote control ofthe newly-added device,tap on its key on the Device Selection Strip.Try
using the Hard Keys to adjust volum e a nd chan ge cha n nels . Try tapping on th e Page Arrows to acce ss
other remote control functions and then try tapping on the soft keys on each page to test them.
www.oneforall.com 7
CBL SATTV
DVD LDVCR
AMP CDTUN
DAT PHOTAPE
HOMEV.ACC
SEARCH
Select the device.
Esc
Tap on
BY BRAND
BY SEARCH
BY CODE
DELETE
DEVICE SETUP
Welcome to Device Setup!
What method
would you like to use?
Esc ?
Tap on
ADD
REPLACE
SEARCH
Would you like to
ADD the device or REPLACE
it with an existing one?
Esc ?
Tap on
if 1st TV
Tap on
if 2nd TV
PREV NEXT
Test
1
PWR
SEARCH
Use the test keys to find
your device type.
Press OK to save.
Esc OK
TV
First, tap on
To check
previous code,
tap on
If device does not
respond, tap and
repeat test.
SETUP BY CODE
Find the code for your device in the Set-Up Code section (starting on page 128).Codes are listed by
device type and brand name.The most popular code is listed first.Make sure your device is switched
on (not in standby).Newly captured Manufacturer’s codes are available for customer access on our
web site www.oneforall.com.
1. Tap on Setup key (upper left corner).
2. Tap on DEVICESETUP.
NOTE:To return to a previous menu,tap on the ESCkey.To return to last-displayed Device
Screen,press down on ESCor MUTE for at least 2 seconds.For help,tap the ? key.
3. Tap on the OKkey to confirm your choice.MOSAIC will ask if you want to relabel the newly-added
device.
• To relabel it,tap on the YES key and you will see the LABEL Menu (see explanation o n pa g e 25 s tep 6).
• To keep the label the same,tap on the NO key.
You wi ll see a confirmation screen that says the key has been successfully programmed.To
program another device,tap on the ESC key.To return to the Device Screen,press on ESC or
MUTE for at least 2 seconds.
To test remote control ofthe newly-added device,tap on its key on the Device Selection Strip.Try
using the Hard Keys to adjust volum e a nd chan ge cha n nels . Try tapping on th e Page Arrows to acce ss
other remote control functions and then try tapping on the soft keys on each page to test them.
CLEAR
CODE SETUP
Device Code
1234
Enter the 4 digit code,
press OK to save.
Esc OK
1 2 3
4 5 6
7 8 9
0
Then tap on
First,
enter
code.
page 128-143
CLEAR
CODE SETUP
Device Code
_
Enter the 4 digit code,
press OK to save.
Esc OK
1 2 3
4 5 6
7 8 9
0
ADD
REPLACE
CODE SETUP
Would you like to
ADD the device or REPLACE
it with an existing one?
Esc ?
Tap on
if 1st TV
Tap on
if 2nd TV
CBL SATTV
DVD LDVCR
AMP CDTUN
DAT PHOTAPE
HOMEV.ACC
CODE SETUP
Select the device.
Esc
Tap on
BY BRAND
BY SEARCH
BY CODE
DELETE
DEVICE SETUP
Welcome to Device Setup!
What method
would you like to use?
Esc ?
Tap on
8 www.oneforall.com
DELETING A DEVICE
If you no longer use a certain device or it has been incorrectly added to the Device Selection Strip,use
the following procedure to delete it from MOSAIC’s memory.
1. Tap on Setup key (upper left corner).
2. Tap on DEVICESETUP.
NOTE:To return to a previous menu,tap on the ESCkey.To return to last-displayed Device
Screen,press and hold down ESC for at least 2 seconds.For help,tap the ? key.
3. Tap on the DELETEkey.You will see the DELETE DEVICE Menu which shows the current
Device Selection Strip.
4. Using the Device Selection Strip,tap the device key you want to delete.If needed,tap the
left/right scroll arrows to display other device choices.When you have selected a device,it will
become highlighted as YESand NO keys ap p ear.
• To delete the selected device,tap on the YES key.You will see a confirmation screen that says
the key has been successfully deleted.To delete another device,tap on the ESC key to return to
the DELETE DEVICE Menu,or press down on ESC or MUTE for at least 2 seconds to return to
the last-displayed Device Screen.
• To cancel deleting the selected device,tap on the NO key. MOSAIC will return to the Device
Selection Strip with no devices selected to start the process over.If you’re done,tap on the ESC
to return to t he DEVICE SETUP Menu,or press down on ESC or MUTE for at least 2 seconds
to return to the last-displayed Device Screen.
Which device would you
like to delete?
DELETE DEVICE
Esc OK
CBLTV VCR
BY BRAND
BY SEARCH
BY CODE
DELETE
DEVICE SETUP
Welcome to Device Setup!
What method
would you like to use?
Esc ?
Tap on
www.oneforall.com 9
NEW CODES
NOTE:This section only applies after you have performed a download ofnew device codes
(see SYSTEM– UPGRADE on page 36).
NOTE:Make sure the device you want to add is turned on (not in standby).
After downloading,MOSAIC will store the new device codes in memory.An additional soft key,
labelled NEW CODES,w il l appear on the DEVICE SETUP Menu which you will use to find a working
code for a selected device.
1. Tap on Setup key (upper left corner).
2. Tap on DEVICESETUP.
3. Tap on the NEW CODESkey.You will see the UPGRADE Test Menu.
NOTE:To return to a previous menu,tap on the ESCkey.To return to last-displayed Device
Screen,press and hold down ESCfor at least 2 seconds.For help,tap the ? key.
4. Tap on the first code in the list (e.g.,TV 1),aim MOSAIC at the desired device (e.g.,television),
and tap on the PWR key. The device should turn off.If it does not respond, tap on the next code
in the list (e.g.,TV 2),then tap on the PWR key again.If the device still does not respond,repeat
this process by testing each code until you find one that works.
NOTE:Depending on your download, the code list may include more than one device t y pe .
5. To save a code that works,tap on the OK key.You will see the UPGRADE ADD/REPLACE menu
that lists two choices.
Test
1
PWR
TV1VCR 2
TV2
TV3
TV4
TV5
VCR1
VCR2
VCR3
VCR4
VCR5
UPGRADE
Use the scroll bar to try
each one in turn.
Esc OK
Tap on
BY BRAND
BY SEARCH
BY CODE
DELETE
NEW CODES
DEVICE SETUP
Welcome to Device Setup!
What method
would you like to use?
Esc ?
Tap on
10 www.oneforall.com
• Use the ADD key when setting up a new device (e.g.,a DVD player) that is not currently on
the Device Selection Strip (ifneeded,refer to USING THE TOUCH SCREEN– on page 4).The
remaining instructions assume you will be adding a new device.
• Use the REPLACE key when replacing a device (e.g.,a TV set) that is currently on the
Device Selection Strip.
6. Tap on the ADD key to add the device to MOSAIC’s memory.You will see the default device label
being added to t he Dev ice Selection Strip.
NOTE:If you tap on the REPLACEkey instead,MOSAIC will ask you to select the device to be
replaced and,af ter your selection,if you want to relabel it.However,if the dev ice to be
replaced has programmed keys,MOSAIC will first ask if you want to keep or clear the settings.
7. Tap on the OK key to confirm your choice.MOSAIC will ask if you want to relabel the newlyadded device.
• To relabel it,tap on the YES key and you will see the LABEL Menu (see explanation
on page 25 step 6).
• To keep the label the same,tap on the NO key.
8. You will see a confirmation screen that says the key has been successfully programmed.To program a function of the same t y pe,tap on the ESC key.To re tur n t o the Dev ice Screen,press on
ESC or MUTE for at least 2 seconds.
9. To test remote control of the newly-added device,tap on its key on the Device Selection Strip.Try
using the Hard Keys to adjust volume and change channels.Try tapping on the Page Arrows to
access other remote control functions and then try tapping on the soft keys on each page to test
them.
10. If desired,repeat all steps to add other devices that appeared in the new codes list of step 3.
Test
1
PWR
TV1VCR 2
TV2
TV3
TV4
TV5
VCR1
VCR2
VCR3
VCR4
VCR5
UPGRADE
Use the scroll bar to try
each one in turn.
Esc OK
Tap on
ADD
REPLACE
UPGRADE
Would you like to
ADD the device or REPLACE
it with an existing one?
Esc ?
www.oneforall.com 11
Personalization
MACROS
MOSAIC includes a powerful Macro feature that memorizes and plays back a series of key strokes at
any time with the tap ofone key.Up to 21 macros can be defined, each containing a maximum of32
keystrokes.Once defined,a macro must be placed on a Device Screento be used.MOSAIC allows
placement ofup to four “global”macro keys across the top of every Device Screen.Also,you may place
additional macros in specific Device Screens using empty locations or by overriding existing key functions.
ADDING A MACRO
As an instr u c t ion ai d, we’ll create an example “Power On”macro that turns on the Cable Box and TV
power and then tunes in a favorite channel in this exact order:
1. Select the Cable Box and power it on.
2. Add a 2-second delay.
3. On the Cable Box,select channel 28.
4. Select the TV and power it on.
6. Add a 1-second delay.
7. On the TV,select channel 3 to view the modulated signal from the Cable Box.
Each command counts as one macro keystroke,except when selecting a device key which counts as
two.In this example,the total keystroke count is eleven.
NOTE:Adding delays allow devices to power up to their full operating state.In most cases,1 to
2seconds is sufficient,but MOSAIC will accept up to 8 seconds and only count it as one keystroke.
12 www.oneforall.com
1. Tap on Setup key (upper left corner).
2. Tap on PERSONALIZATION.
NOTE:To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen,press down on ESC or MUTE for at least 2 seconds.For help,tap the ? key.
3. Tap on the MACROS key.You will see the MACROS Menu.
4. Tap on the ADD key.You will see the ADD MACROS Menu.
5. Tap on an open Macrokey (i.e.,a macro key that is not labelled).You will see the ADD MACROS
Screen(as shown below) which looks similar to a Device Screen.
6. At this point,we’ll record the example keystrokes listed on page 12. But first make sure the Cable
Box and TV are turned off(in standby).
a. Tap on the CBL key o n the Dev ice Selection Strip.
b. Tap on t he PWR key.
c. Tap on the DELAY key twice for 2-second delay.
NOTE:Each DELAY keystroke is equal to 1 second.
d. Tap on the 2 key f o llowed by the 8 key to enter channel 28.
e. Tap on the TV key on t h e Device Selection Strip.
f. Tap on the PWR key.
g. Tap on the DELA Ykey once for 1-second delay.
h. Tap on the 0 key fo llowed by th e 3 key to enter channel 3.
i. Aim MOSAIC at the Cable Box/TV and tap on the TEST key.You should see the LED blink as
commands are sent to power on the Cable Box and tune it to channel 28,followed by TV power
on and tuning it to channel 3.If the macro did not work correctly,tap on the CLEAR key and
repeat steps 6a through 6i.
ADD MACROS
Select a Macro key.
Esc
Tap on
an open
key
ADD
VIEW
COPY
DELETE
DELETE ALL
MACROS
Program a sequence of
keystrokes onto one key.
Esc ?
Tap on
1 2 3
4 5 6
7 8 9
0
-/--
AV PWR
ADD MACROS
Begin recording the
keystrokes.
Esc
CBLTV VCR
www.oneforall.com 13
7. To save the macro,tap on the OK key.You will see the ADD MACROS Screen(as shown below).
8. To label the saved macro,tap on the YES key.You will see the ADD MACROS Label Screen.
Follow the procedure that is similar to the one starting with step 3 on page25 to label the macro
as TV On and tap the OK key when you’re do n e .
NOTE:If you tap on the NO key,the macro will be labelled using the default labeling system
which labels macros in ascending numerical order (e.g.,M1, M2,M3,etc.).
9. MOSAIC will ask you where you want to copy the macro.
• To have it appear on all Device Screens,tap on the ALL DEVICESkey. You will see a row ofup to
four empty keys appear which correspond to the space directly below Device Selection Strip.Tap
on any empty key to assign it or tap on an existing one to override it. MOSAIC will display a confirmation screen.
• To h ave it app ear on a sp e cific Device Screen,tap on the SPECIFIC DEVICE key.You will see the
last-displayed Device Screen.Using the Device Selection Strip,tap on the desired device key.If need-
ed,tap on lef t / right scroll arrows to view othe r de vice choices.The Device Screen will display all
keys on all pages for the selected device. Tap on any empty key.MOSAIC will display a confirmation screen.
NOTE:To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen,press down onESC or MUTE for at least 2 seconds.For help,tap the ? key.
10. Repeat steps 1 through 9 for each new macro you want to create.
1 2 3
4 5 6
7 8 9
0
-/--
AV PWR
DELAY TEST CLEAR
ADD MACROS
Press TEST to check
the macro, OK to save
or CLEAR to start over.
Esc
OK
CBLTV VCR
T
YES NO
ADD MACROS
Relabel the key?
14 www.oneforall.com
VIEWING MACROS
To see what commands are stored in a macro,perform the following steps:
1. On the Device Screenin the upper left corner,tap on Setup.You will see the main SETUP Menu
that greets you and asks,“What would you like to config ure?”
2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu.
NOTE:To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen,press down on ESC or MUTE for at least 2 seconds.For help,tap the ? key.
3. Tap on the MACROS key.You will see the main MACROS Menu.
4. Tap on the VIEW key.You will see the VIEW MACROS Menu.
5. Tap on any displayed Macro key (e.g.,M1, M2,etc.). You will see the commands that make up
the selected macro.To return to previous menu,tap on the
ESC key.To return to the Device
Screen,press down on
ESC or MUTE for at least 2 seconds.
ADD
VIEW
COPY
DELETE
DELETE ALL
MACROS
Program a sequence of
keystrokes onto one key.
Esc ?
Tap on
M 1 M 2 M 3
VIEW MACROS
Select a Macro key.
Esc
www.oneforall.com 15
COPYING MACROS
To copy a macro,perform the following steps:
1. On the Device Screenin the upper left corner,tap on Setup.You will see the main SETUP Menu
that greets you and asks,“What would you like to config ure?”
2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu.
NOTE:To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen,press down on ESC or MUTE for at least 2 seconds.For help,tap the ? key.
3. Tap on the MACROS key.You will see the main MACROS Menu.
4. Tap on the COPYkey.You will see the COPY MACROS Menu.
5. Tap on the macro key you want to copy.MOSAIC will ask you where you want to copy the macro.
• To have it appear on all Device Screens,tap on the ALL DEVICESkey. You will see a row ofup
to four empty keys appear which correspond to the space directly below Device Selection Strip.
Tap on any empty key to assign it or tap on an existing one to override it. MOSAIC wil l display a
confirmation screen.
• To have it appear on a sp ecific Device Screen,tap on the SPECIFIC DEVICEkey.You will see the
last-display ed Device Screen.Using the Device Selection Strip,tap the desired device key.If needed,
tap the left/right scroll arrows to view other device choices.The Device Screen will display all keys
on all pages for the selected device. Tap on any empty key and MOSAIC will display a confirma-
tion screen.
NOTE:To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen,press down on ESC or MUTE for at least 2 seconds.For help,tap the ? key.
ADD
VIEW
COPY
DELETE
DELETE ALL
MACROS
Program a sequence of
keystrokes onto one key.
Esc ?
M 1 M 2 M 3
COPY MACROS
Select a Macro key.
Esc
16 www.oneforall.com
DELETING A MACRO
To delete a single macro, per form the following steps:
1. On the Device Screenin the upper left corner,tap on Setup.You will see the main SETUP Menu
that greets you and asks,“What would you like to config ure?”
2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu.
NOTE:To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen,press down on ESC or MUTE for at least 2 seconds.For help,tap the ? key.
3. Tap on the MACROS key.You will see the main MACROS Menu.
4. Tap on the DELETE key.You will see the DELETE MACROS Menu.
5. Tap on the Macrokey you want to delete.You will see a confirmation screen that says the macro
key has been successfully deleted from all device screens and the main MACROS Menu.
NOTE:Use VIEW/DELETE (see PERSONALIZATION – VIEW/DELETEon page32) to delete
macros from Device Screens but keep them intact on the main MACROS Menu for future copying.
To delete another macro key,tap on the ESC key to retur n to t he DELETE MACROS Menu,or pres s
down on
ESC or MUTE for at least 2 seconds to return to the last-displayed Device Screen.
ADD
VIEW
COPY
DELETE
DELETE ALL
MACROS
Program a sequence of
keystrokes onto one key.
Esc ?
Tap on
M 1 M 2 M 3
DELETE MACROS
Select a Macro key.
Esc
www.oneforall.com 17
DELETING ALL MACROS
To delete all macros,perform the following steps:
1. On the Device Screenin the upper left corner,tap on Setup.You will see the main SETUP Menu
that greets you and asks,“What would you like to config ure?”
2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu.
NOTE:To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen,press down on ESC or MUTE for at least 2 seconds.For help,tap the ? key.
3. Tap on the MACROS key.You will see the main MACROS Menu.
4. Tap on the DELETE ALLkey.MOSAIC will ask you to confirm your choice.
• To delete all macros,tap on the YES key.You will see a confirmation screen that says all macros
have been successfully deleted on all device screens and the main MACROS Menu.Tap on the
ESC key to return to the DELETE MACROS Menu.
NOTE:Use VIEW/DELETE(see Personalization - View/Delete on page 32) to delete macros
from Device Screens but keep them intact on the main MACROS Menu for future copying.
• To cancel deletion of all macros,tap on theNO key.MOSAIC will return to the main MACROS
Screen.If you want to delete a single macro,see the previous section,Deleting A Macro on page
17,or see View/Delete on page 32.
NOTE:To return to a previous menu,tap on the ESCkey.To return to last-displayed Device
Screen,press down on ESCor MUTE for at least 2 seconds.For help,tap the ? key.
ADD
VIEW
COPY
DELETE
DELETE ALL
MACROS
Program a sequence of
keystrokes onto one key.
Esc ?
Tap on
YES NO
MACROS
Are you sure you want to
DELETE ALL?
18 www.oneforall.com
Loading...