One for All URC-8308, KAMELEON 8 User Manual

English

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 1

Dansk

Norsk

Svensk

Suomi

EППЛУИО¿

Русский

Türkçe

Deutsch

Español

Brugsanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .S. 27

Bruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 53

Bruksanvisning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 79

Käyttöohje . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 105

√√‰‰ËËÁÁ››Â˜˜ ¯¯ÚÚ‹‹ÛÛˆˆ˜

Инструкция пользователя

Kullanım kılavuzu

Bedienungsanleitung

Guía del usario

˜

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P.

. . . . . . . . . . . . . . . . . .P.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P.

131

157

183

209

235

URC-8308

Universal remote

Universal fjernbetjening

Universal fjernkontroll

Universal fjärrkontroll

Yleiskaukosäädin

∆∆ЛЛППВВ¯¯ВВИИЪЪИИЫЫЩЩ‹‹ЪЪИИФ

Универсальный пульт

дистанционного управления

Evrensel uzaktan kumanda

Universal Fernbedienung

Mando a Distancia Universal

Ô

TABLE OF CONTENTS

ABOUT YOUR KAMELEON 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

ATTERIES

B

HE KEYPAD

T

•

(How to set up the KAMELEON 8 to control your devices)

•

SET-UP CODES
TV : Television / LCD / Plasma / Projector / Rear Projection
V

AT : Satellite Receiver / Set-Top-Box / DVB-S / DVB-T /

S

BL : Cable Converter / Set-Top-Box / DVB-C

C
VAC : Video Accessory like Media Centres / AV Accessories /

D : CD Player / CD-R / MD

C
PHO : Phonograph
MIS : Audio / Miscellaneous Audio
HOM : Home Automation (e.g. IR controlled curtains /

AMP : Audio / Amplifier / Active Speaker System
TUN : Audio / Audio Receiver/Tuner/Amplifier / (DVD)

CAS : Cassette Recorder (Tape Deck)
LDP : Laser Disc Player / Video CD
DAT : Digital Audio Tape / DCC
DVD : DVD Player / DVD-R / DVD Home Cinema /

PVR : Personal Video Recorder

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SETTING UP THE KAMELEON 8 . . . . . . . . . . . . . . . . Page 12

Search Method

CR : Video Cassette Recorder / TV/VCR Combi / PVR

F
SAT/HDD

AV Selectors

IR controlled light switches etc.)

Home Cinema

DVD Combi / DVD/HDD / DVD/PVR / DVD/VCR Combi

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

.

. . . . . . . . . . . . . . .

reeview (UK) / TNT (F) / Digitenne (NL) / DTT (I) / TDT (E)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . .

.

. . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . .

.

. . . . . . . . . .

. . . . . . . . .

sh

i

l

g

n

E

- 11

261
2

275
2

280
2
280
281

281
281

281
282
283
283

283
288

3

72

79

80

CODE BLINK OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

(To find out which code is currently programmed)

QUICK CODE REFERENCE

LEARNING FEATURE

(How to copy functions from your original working remote
onto the KAMELEON 8)

OPERATIONAL RESET

EXTRA FEATURES

• Key Magic® (How to program missing functions)

• Mode re-assignment
(How to set up two of the same devices on the KAMELEON 8)

• Volume Punch-Through

• Device Sleeptimer

• KAMELEON 8 - Timer

• Macros (sequence of commands)

• Code upgrade technology

• Colour & Brightness

TROUBLE-SHOOTING

• Problem & Solution

• Customer Service

Use the OneForAll Web Wizard to set up your remote with the help
of the Internet. This wizard tells you how to install your different devices
without reading the complete manual. To use this easy set-up tool, please
visit www.oneforallwebwizard.com.

WW W.ONEFORALL.COM 1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

. . . . . . . . . . . . . . . . . . 18

. . . . . 19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

About Your KAMELEON 8

Easy to use unique “EL” display

By choosing the ONE FOR ALL KAMELEON 8 universal remote control you have

pted for easy use. Your KAMELEON 8 features a unique, user-friendly backlit

o

isplay, which ensures you have easy access to all the keys you need, whilst

d
hiding those you don’t. Made of the strictest quality, it will provide long-term
satisfaction. When inserting the batteries the KAMELEON 8 will be in “demo-

mode” and show several screens. The “demo mode” will be cancelled by setting

p your remote (press and hold MAGIC for about 3 seconds then press and

u
release ESC) .

After replacing batteries, you will need to first press any key before the screen
will light up. From then on, the display will automatically illuminate

henever the remote is picked up (touching screen and remote simultaneously).

w

t is also possible to change the activation-mode into activation by key press. To

I
set the ”EL” display to activation by key press, see page 4, section: ”EL” screen

ctivation setting.

a

Controls up to 8 devices

Your KAMELEON 8 is designed to let you use one remote to operate your Video

nd Audio equipment; any device designed to be operated by an infrared signal.

a

our KAMELEON 8 comes with 2 IR (infra-red) wide range transmitters for

Y
maximum range and is High Frequency capable up to 450 kHz. You can choose
any combination of 8 devices you would like to operate.

TV Television / LCD / Plasma / Projector / Rear Projector

SAT Satellite Receiver, Cable Converter, DSS / Video Accessory

DVD DVD Player / DVD-R / DVD Home Cinema / DVD Combi / DVD/HDD /

VCR Video Cassette Recorder / TV/VCR Combi / DVD/VCR Combi / Cassette

PVR Personal Video Recorder, Hard Disc Recorder

CD CD Player / CD-R / MD / Phonograph / Home Automation

AUD Audio / Audio Receiver/Tuner/Amplifier / (DVD) Home Cinema

LIGHT IR controlled light switches - The KAMELEON 8 also features a

(e.g. Media Centres)

Laser Disc Player

Player (Tape Deck) / Digital Audio Tape / DCC

(e.g. IR controlled curtains etc.

“LIGHT” mode, for control of power modules used in Light Control™
Dedicated addressable 433.92 MHz protocol. This mode will send out
InfraRed (IR) commands to a separately available “ONE FOR ALL Light
Control™ Starters Kit - HC-8300”, which will convert the IR com­mands in RadioFrequency (RF) to be received by power modules for
dimming and switching lights.

To enable Light Control™ on your KAMELEON 8 you must
purchase the „ONE FOR ALL Light Control™ Starters kit ­HC-8300“.

2 WWW.ONEFOR ALL.COM

About Your KAMELEON 8

Learning feature

The KAMELEON 8 comes equipped with the unique “learning feature”, which

eans that you can copy almost any function (max. ± 50) from your original

m

working) remote control onto your new KAMELEON 8 (See “Learning Feature”

(
on page 15). This comes in handy, when after having setup your KAMELEON 8
you may find that some functions from your original remote are missing on your
KAMELEON 8 key pad.

Macros (sequence of commands)

Your KAMELEON 8 comes with an easy-to-use Macro feature, allowing you to
send several commands with the press of a single key (for example turning a few

evices on or off).

d

ou can use for example the custom keys (I, II, III, IV) for this feature. Once

Y
you programmed a macro on one of these keys, the sequence will be performed

n every mode.

i

Code upgrade technology

Your ONE FOR ALL KAMELEON 8 also offers a Code upgrade technology.

his technology gives you the possibility to add codes to the memory. If your

T

evice uses a particular code which is not found in the KAMELEON 8 memory

d
(using the “Direct code set up” on page 12 or the “Search Method” on page

13) you may use the ”Code Upgrade Technology” (see page 24). Thanks to this
echnology your KAMELEON 8 will never become obsolete.

t

Batteries

Note: when inserting the batteries the KAMELEON 8 will be in

“demo-mode (showing several screens). The KAMELEON 8 will go
out of demo-mode automatically as you set it up.

Your KAMELEON 8 requires 4 AAA/LR03 alkaline batteries.

1. Unscrew the battery door using a coin.

2. Insert the batteries with the positive end (+) upwards.

3. Replace the battery door back into position.

Low Voltage Indicator

As soon as the batteries run out of power the KAMELEON 8 will indicate this.
The IR indicator will flash 5 times whenever you press a key and you cannot
access programming mode.
Please make sure to replace the batteries with 4 new AAA/LR03 alkaline
batteries.

WW W.ONEFORALL.COM 3

The Keypad

This product features an “EL” panel (Electro Luminescence technology) which is
activated by touching screen and remote simultaneously to activation by

eypress. In order to save battery life, the “EL” screen will stay illuminated for

k

seconds during normal use.

8

One of the key features of the KAMELEON 8 is the “EL” display, which changes
to suit the device you are controlling. The overview on page 6 will show you all

he possible functions that you may obtain.

t

“EL” Screen activation setting

The KAMELEON 8 features an “EL” panel which is activated by touching screen

nd remote simultaneously or by keypress.

a

It is possible to lock the KAMELEON 8 to one activation setting:

1. Press and hold the MAGIC key for about 3 seconds.

2. Press OTHER.

3. Now press 9 8 9. The IR Indicator will blink twice (or 4 times).

-> If the animated IR Indicator blinks twice the “EL” panel will be activated only

by touching screen and remote simultaneously.

-> If the animated IR Indicator blinks four times the “EL” panel will be activated

only by keypress.

Simply perform these steps to lock the KAMELEON 8 to the activation
setting that you prefer.

The screen will change to the setup screen.

“EL” Screen brightness adjustment

To increase or decrease the brightness of the KAMELEON 8 “EL” screen:

1. Press and hold the MAGIC key for about 3 seconds.

2. Press BRIGHT.

3. > To increase the brightness of the “EL” screen press and

4. Press ENTER to store the brightness setting and return

- Increasing the brightness of the KAMELEON “EL” panel can decrease
the battery life. Battery life varies from 3 - 12 months (depending on
brightness setting and usage).

4 WWW.ONEFOR ALL.COM

The screen will change to the setup screen.

hold NEXT

> To decrease the brightness of the “EL” screen press and

hold PREVIOUS.

to the setup screen OR press ESC to return to the previously
set brightness level.

The Keypad

“EL” On time setting

o change the duration (default: 8 sec.) that the KAMELEON 8 “EL” screen will be

T

N, after each keypress during use of the remote (not programming mode):

O

1. Press and hold the MAGIC key for about 3 seconds.

2. Press OTHER.

3. Press 9 7 8. The IR Indicator will blink twice.

. Press 1, 2, 3, 4 or 5 (e.g. 1 = 4 seconds) depending on

4

Selection “EL” On Time

14seconds
2 8 seconds (default)
3 12 seconds
4 16 seconds
5 20 seconds

The screen will change to the setup screen.

your choice, see table below. The animated IR Indicator

ill blink twice. Press ENTER to store the new EL on time

w

etting and to return to the SETUP screen OR press ESC

s

o return to the previously set EL on-time setting.

t

WW W.ONEFORALL.COM 5

The Keypad

TV

SAT

DVD

VCR

PVR

CD

AUD

IGHT

L

IR Indicator

6 WWW.ONEFOR ALL.COM

The Keypad

1. IR (infra-red) Indicator

. Device keys

2

The TV, SAT, DVD, VCR, PVR, CD, AUD and LIGHT keys select the device to be
controlled. For example pressing the TV key allows the remote to control

he functions of your Television, after pressing VCR you can operate your

t

ideo Recorder, after pressing the SAT key you can operate your Satellite

V
Receiver or Cable Converter etc. (see page 2 for more details). After pressing
a device (mode) key on your KAMELEON 8 the applicable device icon will

nimate, to show the currently activated mode. Pressing the device key will

a
allow you to return to the main screen (TV, SAT and AUD modes). The
KAMELEON 8 also features a “LIGHT” mode. Together with a separately
available “ONE FOR ALL Light Control™ Starters Kit - HC-8300”, this allows
you to dim and switch ON/OFF lights through-out your whole house.

3. MAGIC (in ”shifted” or ”programming” mode)

The IR Indicator animates when IR is being “sent” or

received”. The KAMELEON 8 animated IR Indicator will

“

how “outgoing IR” whenever a function key is pressed.

s
When using the “Learning Procedure” or “Code Upgrade
Procedure” the animated IR indicator will show “incoming
IR”. Outgoing IR will be indicated by an “outside to inside”

nimation of the IR Indicator. Ingoing IR will be indicated

a
by an “inside to outside” animation of the IR Indicator. The
IR Indicator will give feedback when keys are pressed both
during normal use and in programming mode (middle seg-

ent of the IR Indicator will blink).

m

The MAGIC key is used to set up your KAMELEON 8 and to
access special functions. If you press this key shortly, the
screen will go into ”shifted” mode (for 10 seconds) which
will give access to some secondary functions such as color,
brightness and sleeptimer.

Programming mode

If you press the MAGIC key longer (about 3 seconds), the
KAMELEON 8 will enter ”programming” mode. The screen
will change to the “setup screen”.

DEV SET
SEARCH
MODE
KEY MAGIC
MACRO

BRIGHT
LEARN

IR DELETE
VOLUME
OTHER

WW W.ONEFORALL.COM 7

• Device Setup mode

• Search Method

• Mode re-assignment

• To program missing functions

• To setup a key (I, II, III, IV) with a Sequence of
commands

• “EL” Screen brightness adjustment

• To copy functions from your original working remote

onto the KAMELEON 8

• Deleting learned and Key Magic functions

• Volume punch through feature

• Variable EL On time (4 sec, 8 sec, 12 sec, 16 sec, 20 sec)

• Operational Reset

• KAMELEON 8 - Timer

• EL screen activation setting

• Code Verification

• Modem Upgrade

The Keypad

4. SCROLL

5. ENTER

. POWER (in shifted mode; Sleeptimer)

6

7. PP / TIMER / RAND.

8. PRESET / BACK

The SCROLL key gives you the possibility to move through

he different screens (if applicable) within a certain mode

t

uring normal use and programming mode. This only

d
applies to TV, SAT and AUD modes.

The ENTER key allows you to confirm your choice in
programming mode.

he POWER key controls the same function as on your

T
original remote.

In TV and SAT mode this key may feature the “Last

hannel”, “Previous Program” or “Recall” function

C
(depending on your original remote control). In VCR and
DVD mode you will obtain the TIMER RECORD or TIMER
ON/OFF function. In CD and AUD mode you will obtain the
RANDOM (or shuffle) function.

In AUD mode, the PRESET key will change to the
PRESET/MENU screen allowing access to the PRESETS 1 - 9,
0 and +10 on the digits. In PVR and SAT menu mode you
may use the “back” key to go to the previous menu screen.

9. 16:9 / PROG.

10. TV/VCR / TV/SAT / TV/DVD

11. AUDIO / TUNE -

12. INFO / CLEAR

In TV mode you will obtain the 16:9 (screen format) func­tion. In VCR, DVD, AUD (main screen) and CD mode you
will obtain the PROG (program) function.

In VCR mode you will obtain the TV/VCR function. In SAT
mode you will obtain the TV/SAT function. In DVD mode
you will obtain the TV/DVD function.

In DVD, SAT, PVR and AUD mode (main screen) you will
obtain the “Audio” function. In AUD mode (preset/Menu
screen) you will obtain the “TUNE –“ function.

In SAT and PVR mode you can select the “info” function. In
CD, AUD (main screen) and DVD mode you will obtain the
“clear” function.

8 WWW.ONEFOR ALL.COM

The Keypad

3. FAV / EDIT / SP/LP

1

4. SUBT. / TUNE +

1

n SAT and PVR mode you will obtain the FAV (favourite)

I

unction. In DVD, CD and AUD mode you will obtain the

f
EDIT function to edit information. In VCR mode you will

btain the SP/LP (tape speed) function.

o

n SAT, PVR, DVD and AUD main mode you will obtain the

I

UBTITLE function. In AUD mode you will obtain the

S
“TUNE +” function in the preset/Menu screen.

15. MENU

6. EXIT

1

17. DSP / GUIDE

18. MUTE

19. CH +/- (in shifted mode; brightness +/-)

ressing this key will allow you to operate the Menu and

P

n TV and AUD mode will also change the screen to the

i
menu mode. The MENU key operates the same function it
did on your original remote control.

The EXIT key will operate the same as on your original
remote. To return to the main screen (TV, SAT and AUD
mode) press the device key or use the SCROLL key.

If available on your original remote, in AUD mode you will
obtain the “DSP” function. In TV, SAT, DVD, VCR and PVR
mode the “GUIDE” key will provide you the “guide”
function, if available on your original remote control. In
TV mode the “GUIDE” key will change the screen to
“menu mode screen”.

The Mute key operates the same function it did on your
original remote control.

These keys operate just as those on your original remote.
In shifted TV mode (accessed by pressing MAGIC shortly
and releasing it) these keys may provide you the bright­ness +/- function.

20. Directional keys (Up, Down, Left, Right)

WW W.ONEFORALL.COM 9

If available on your original remote control, these keys
will allow you to navigate through the menu. On some
TV’s you may have to press CH+/- and VOL+/- keys OR the
color keys (red, green, yellow, blue) to navigate through
the menu, depending on your model of TV. In AUD main
mode these keys will (if available on your original remote)
allow you to adjust the CENTRE and REAR levels of your
speaker(s). In AUD menu mode these keys will (if available
on your original remote) allow you to navigate in the
menu-screen.

The Keypad

21. OK / SURROUND

22. VOL +/- (in shifted mode; colour +/-)

23. Number keys / INPUT (in prog. Mode; setup features)

24. -/-- / PPV

In menu mode this key will confirm your choice. On some

evices you can confirm your menu option simply by

d

ressing MENU. In AUD main mode this key will allow you

p
to access the surround mode of your device (if available on
your original remote).

The volume keys operate just as those on your original

emote. In shifted TV mode (accessed by pressing MAGIC

r

hortly and releasing it) these keys may provide you the

s
colour +/- function.

he number (1 – 9, 0) keys provide functions just like your

T

riginal remote. In AUD mode, the number (1 – 9, 0, -/—)

o
keys may provide (if available on your original remote) an
INPUT function (TUNER, CD etc.). If your original remote

eatures a “function select” or “input select” function you

f
may find this under the AV key. When in programming

mode, the digit keys will display the various setup
features.

If your original remote uses one/two digit input switching
(-/-- symbol), this function can be obtained by pressing the

-/-- key. In SAT (menu screen) and PVR mode you will
obtain the PPV function.

25. AV / HELP

26. ESC

27. Transport keys (PLAY, STOP etc.)

The AV key operates the same function it did on your
original remote control. If your original television or video
remote uses a 20 key, this function can be found by
pressing the AV key. If your original satellite or PVR
remote comes with a “help” function, you can obtain this
pressing the HELP key. In AUD mode you will obtain the
“input source” function.

This key only appears in programming mode and is used to
return to the Setup screen or to exit programming mode.

When in VCR, DVD, SAT (menu screen), PVR, CD or AUD
mode; these keys operate the transport functions like
PLAY, FF, REW, SKIP+/- (TRACK+/-) etc.of your device. To
prevent accidental recording, the RECORD key must be
pressed twice to start recording.

10 WW W.ONEFORALL.COM

The Keypad

28. Teletext Keys

XPAND: Shows the top half of the teletext page in larger letters.

E

y pressing again, you can see the bottom half of the teletext page

B
enlarged. To return to regular teletext viewing, press the EXPAND key

gain, or press the TEXT ON key, depending on your television.

a

TEXT ON: In TV mode: once in text mode, pressing this key may
switch to MIX or TURN OFF text, depending on your television.

his function is also available in SAT mode.

T

HOLD/STOP: Stops changing pages.

M

TEXT OFF: In TV mode: switches the television back to regular

viewing mode. On some televisions this may be done by pressing
the “TEXT ON” key several times. This function is also available in SAT
mode.

TEXT INDEX: This key will give you access to the index function
within the text mode.

29. Custom keys (I, II, III, IV)

These keys are used to operate the main teletext

unctions. Of course, your Television must have teletext

f

apability. For a more detailed explanation of teletext and

c
fastext, please refer to the manual of your television.
Remember, different televisions control teletext and
fastext functions in different ways. Not all of the teletext

unctions may be available on your particular model.

f

IX: Shows both text and TV picture.

The custom keys are spare keys that give you the possibility
to customize the KAMELEON 8 according to your original
remote control using the “Learning feature” (see page 15)
or ”Key Magic®” (see page 18). These keys are also ideal
for use as “Macro keys” (see page 22).

30. Red / Green / Yellow / Blue

WW W.ONEFORALL.COM 11

When accessing the text mode, the colour keys marked
red, green, yellow and blue, allow you to access the fastext
functions of your television. If on your original remote
control these keys are used for Menu navigation,
the KAMELEON 8 Fastext keys may operate the same.

Setting up the KAMELEON 8

(How to set up the KAMELEON 8 to control your devices)

ote: when inserting the batteries the KAMELEON 8 will be in “demo-

N

ode (showing several screens). Just follow the next steps and

m
the KAMELEON 8 will go out of demo-mode automatically.

xample: To set up the KAMELEON 8 for your television:

E

. Make sure your television is switched ON (not on standby).

1

2. Find your device code in the codelist (pages 261 - 288). Codes are list-

d by device mode and brand name. The most popular code for each brand

e

s listed first. If your brand is not listed at all in the code section, try the

i
Search Method on page 13.

. Press and hold the MAGIC key for about 3 seconds.

3

. Press the DEV SET key.

4

he screen will change to the setup screen.

T

5. Press and release the TV key to select the device type you like

6. Enter the first four-digit code (see codelist pages 261 -

_ _ _ _

7. Now, aim your KAMELEON 8 at your television and try the

8. If your device is responding, press ENTER to save the code.

9. Press and keep ESC pressed for about 3 seconds to

- Most TV’s do not switch back on pressing the POWER key, please try
pressing “CHANNEL+” key to switch your TV back on.

- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.

- To set up your other devices, follow the same instructions above,
only press the appropriate device key during step 5.

- Remember to press the correct device key before operating your device.
Only one device can be assigned to a device key.

to setup.

288) using the number keys. The animated IR Indicator will
blink twice.

following keys to test if the KAMELEON 8 will work with your
device;

• CHANNEL +, CHANNEL-

• VOLUME +, VOLUME -

• MUTE

• POWER.

• MENU.

If your device does not respond, just enter the next code listed
under you brand. If none of the codes listed for your brand
operate your device, then try the Search Method described on
page 13.

return to user mode (all keys for the device mode are
displayed), OR press a device key to select the next
device you like to setup.

To set up a second TV, VCR, SAT, PVR, CD, AUD or DVD (See page 19).

12 WW W.ONEFORALL.COM

Setting up the KAMELEON 8

Search Method

-> If your device does not respond to the KAMELEON 8 after you have tried

­ll the codes listed for your brand.

a

--> If your brand is not listed at all.

The Search Method allows you to scan through all the codes contained in

he memory of the KAMELEON 8.

t

Example: To search for your TV code:

. Switch ON your Television (not on standby).

1

2. Press and hold the MAGIC key for about 3 seconds.

3. Press SEARCH.

4. Press and release the TV key to select the device type you

5. Next, press POWER.

6. Point the KAMELEON 8 at your Television. Now press

7. When your Television switches off, press the ENTER

8. Press ESC to return to the setup screen, or press a

he screen will change to the setup screen.

T

ike to setup.

l

NEXT over and over, until your Television turns off

(every time you press the NEXT key the KAMELEON 8 will
send out a POWER signal from the next code contained in
the memory). You may have to press NEXT many times

(up to 150 times) so please be patient. Remember to
keep pointing the KAMELEON 8 at your Television
while pressing this key. (If you skip past a code, you can

go to the previous code(s) by pressing the PREVIOUS key).

key to store the Code. The animated IR Indicator will
light up twice.

device key if you want to perform the Search Method for
another device.

9. Press ESC again to return to user mode (all keys are

- During step 5, instead of POWER you can also press any other key displayed.
This will be the function sent for the next key presses of NEXT or PREVIOUS
in step 6. If for example; during step 5 you press “2” instead of “POWER”,
the KAMELEON 8 will send the “number 2” signal every time you press
NEXT during step 6 (make sure your TV is switched to another channel).

- To search for your other devices, follow the same instructions above, only
press the appropriate device key during step 4.

- If your Video’s original remote control does not have a POWER key, press
PLAY instead of POWER during step 5.

- In the LIGHT-mode the Search Method does not work.

WW W.ONEFORALL.COM 13

displayed).

Turn your device (television) back on and try all the
remote’s functions to ensure they are working properly. If
you cannot control your Television properly, please contin­ue the Search Method, you may be using the wrong Code.

Code blink out

(To find out which code is currently programmed)

f you have set up your KAMELEON 8 via the Search Method, you can blink

I

ack your code for future reference. Please note that the animated IR Indicator

b
will indicate the 4 digits by animated blinks.

xample: To blink out your television code:

E

1. Press and hold down the MAGIC key (for about 3 seconds).

2. Press OTHER.

. Press 9 9 0, the animated IR Indicator will light up twice.

3

4. Press and release the TV key to select the device type you like

. For the first digit of your four-digit code, press 1 and count

5

6. For the second digit, press 2 and count the animated blinks.

7. For the third digit, press 3 and count the animated blinks.

8. For the fourth digit, press 4 and count the animated blinks.

9. Press ENTER to return to the setup screen OR press a device

10. Press and hold ESC (for about 3 seconds) to return to user mode.

The screen will change to the setup screen.

o check the code for.

t

the blinks of the animated IR Indicator. If there are no blinks,
the digit is “0”.

If there are no blinks, the digit is “0”.

If there are no blinks, the digit is “0”.

If there are no blinks, the digit is “0”. Now you have found

your four-digit code.

key if you want to perform the blink out for another device.

- You can perform steps 5 – 8 in any order and as many times as you want. So,
if you lost count it is possible to blink back the corresponding number again
(e.g. if during step 6 you did not see exactly how many times the animated
IR Indicator blinked just press “number 2” again and count again).

- To blink back the code for your other devices follow the instructions above,
only press the appropriate device key during step 4.

Quick code Reference

Write down the codes for your devices in the boxes below for quick and
easy reference.

■■■■■■ ■

■■■■■■ ■■

■■■■■■ ■

■■■■■■ ■

14 WW W.ONEFORALL.COM

■

■

■

■■■■■■ ■

■■■■■■ ■■

■■■■■■ ■

■■■■■■ ■■

■

■

Learning Feature

(How to copy functions from your original working

he KAMELEON 8 comes with a complete library of pre-programmed codes.

T
After you have set up the KAMELEON 8 for your device, you may find that there
are one or more keys that you had on the original remote control, which do not
have a place on the KAMELEON 8 keypad.

he KAMELEON 8 offers a special Learning feature that allows you to copy

T
almost any function from your original remote control onto the keypad of the
KAMELEON 8.

efore you start:

B

- Make sure your original remote is working correctly.

- Make sure neither your KAMELEON 8, nor your original remote control is

ointing at your device.

p

Learning (direct)

emote onto the KAMELEON 8)

r

Example: To copy the “mono/stereo” function from your original TV

1. Place the KAMELEON 8 and your original remote control on a flat

2. Press and hold down the MAGIC key (for about

3. Press LEARN.

4. Press the device key (Example: TV key) on the KAMELEON 8

5. Press the key (Example: “I” key) on the KAMELEON 8 remote

emote control onto the ”I, II, III or IV”-key of your

r

AMELEON 8.

K

surface. Make sure the ends which you normally point at your
device are facing each other. Point the original remote to the front
of the KAMELEON 8 (see picture below). Keep the remotes at a dis­tance of 2 to 5 cm (0.8 to 2 inches).

3 seconds). The screen will change to the setup screen.

remote to select the mode to which you want to place the
learned function.

where you want to place the learned function. The IR Indicator
will show “incoming IR” three times and then the display will
switch off.

6. Press and hold the key that you want to copy (Example:

7. If you want to copy other functions within the same mode, simply repeat

steps 5 and 6 pressing the next key you want to copy by learning. If you
want to copy another function in a different mode, simply continue with
step 4 followed by steps 5 and 6.

8. Press ENTER to exit the learning mode and return to the setup

WW W.ONEFORALL.COM 15

mono/stereo) on your original remote control. The display
switches back on and you will see two blinks to indicate
successful learning operation.

screen OR press and hold ESC to return to the user screen.

Learning Feature

- As soon as the display switches off in step 5 you need to press the key (in
this example: the ”mono/stereo” key) on your original remote within

5 seconds. If no key is pressed while in learning mode, the remote will

1

eturn to user mode after 30 seconds.

r

During learning, keys such as (TV) menu, (TV) guide etc. will not change

­screen when pressed.

If you learn a function on a key, the original KAMELEON 8 function

-

utomatically becomes shifted. Press the MAGIC key then the key to access

a

t (this excludes the POWER, Channel and Volume keys). If you learned on a

i
digit key, access the original function by pressing magic twice and then

he digit.

t

If you want to learn a function on a key that is not in the main screen, use

­the SCROLL key to change the screen.

- The learning feature is mode specific. Therefore you can place one learned

unction per mode on the same key.

f

- The KAMELEON 8 can learn approximately 50 functions. The amount of keys
depends on the other programmed functions and on the remote to be
learned from.

- You can replace a learned function by placing another learned function on

op.

t

- Please make sure not to use the learning procedure when in direct sunlight

r under incandescent lights.

o

- Make sure you are using new batteries before following the learning
instructions.

- Upon changing the batteries, your learned functions will be retained.

Shifted Learning

It is also possible to place a function shifted on a key to maintain the original
function.

Example: to place the mono/stereo function shifted on the “red” key.

To place the (e.g. mono/stereo) function shifted on the red key, simply follow
steps 1-8 on page 15, only press ”MAGIC” then the ”red” key (instead of
“I”) during step 5.

To access the e.g. ”mono/stereo” function in this example; simply press
”MAGIC” and then the ”red” key.

- If a Shifted Learned function is placed on the Channel and Volume keys
then the “Colour & Brightness“ features will be sacrificed.

- If you place a function shifted on a digit key (0 - 9) you need to press
MAGIC twice then the digit key to access this shifted function.

16 WW W.ONEFORALL.COM

Learning Feature

To delete a “Key Magic function” or “learned
function” from a certain key:

Example: to delete a “Key Magic function” or “learned function” from the “I”

ey in TV mode:

k

1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.

2. Press IR DELETE.

. Press the corresponding device key (example TV).

3

4. Press the corresponding function key (example “I”).

5. Press ENTER to restore the original function OR press and hold ESC to

return to the user screen.

- The original function (if present) of the KAMELEON 8 will be restored.

To delete a shifted “Key Magic function” or “learned
function” from a certain key:

xample: To delete one single ”shifted” learned or Key Magic function, follow

E
the steps below.
Example: to delete the mono/stereo function learned shifted on the ”red” key
in TV mode:

1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.

2. Press IR DELETE.

3. Press the corresponding device key (example TV).

4. Press MAGIC.

5. Press the corresponding function key (example “Red key”).

6. Press ENTER to restore the original function OR press and hold ESC to

return to the user screen.

- The original function (if present) of the KAMELEON 8 will be restored.

To delete all “Key Magic functions” or “learned
functions” from a certain mode:

Example: to delete all “Key Magic function” or “learned functions” from the TV
mode:

1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.

2. Press IR DELETE.

3. Press the corresponding device key (example TV).

4. Press ENTER to restore the original function OR press and hold ESC to

return to the user screen.

- The original function (if present) of the KAMELEON 8 will be restored.

Operational Reset

The Operational Reset will erase all learned functions across all modes.
It may also delete some other programmed functions like Key Magic or Macros.

1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.

2. Press OTHER.

3. Press 9 8 0. The IR Indicator will blink four times and the remote will return

to the setup screen.

WW W.ONEFORALL.COM 17

Extra Features

Key Magic

How to program missing functions)

(

ey Magic® is an exclusive ONE FOR ALL feature. The design of the KAMELEON

K
8 ensures that many functions of your original remote control can be operated ­even those that do not have their own key on the KAMELEON 8 keypad.

requently used functions can be assigned to a key of your choice using the Key

F
Magic® feature of your KAMELEON 8. In order to program a certain function
with Key Magic® you need to know the corresponding function code. As the
function codes vary with different types of devices, they cannot be found in the

anual. You can request your function codes through our consumer service

m
help-line, by letter, fax or e-mail.

All we need to know is:

Brand and Model number of the device in question (for verification if you

•
are using the correct code).

The 4-digit set-up code your device is working with.

•

• How the function was labeled on your original remote control.

You can also visit our website (www.oneforall.com) to find an answer to your

uestions.

q

Once you obtain(ed) your function code(s) from customer service,
programming the code is easy:

1. Press and hold the MAGIC key for about 3 seconds. The screen will

change to the setup screen.

2. Press KEY MAGIC.

3. Press the device key (TV, SAT, DVD, VCR, PVR, CD or AUD).

4. Press the MAGIC key once.

5. Enter the 5-digit function code (provided by customer service).

6. Press the key to which the function will be assigned (if this key is

located in a different screen than the main screen, use the SCROLL key
to access the screen). The IR Indicator will blink twice and the screen will
return to the Setup screen.

- Key Magic® functions are mode specific. To access the function you have
programmed, press the device key first.

- Key Magic® can be assigned to any key EXCEPT the following: Device keys,
ESC, ENTER, MAGIC key and the SCROLL key.

- Please note all the extended function codes you obtain from customer
service for easy future reference.

- Keys such as (TV) menu, (TV) guide etc. will not change screen when
pressed during Key Magic® programming.

®

EXTENDED FUNCTION REFERENCE
(first entry is an example):

DEVICE SET-UP CODE FUNCTION FUNCTIONCODE

TV 0556 16/9 format 00234

18 WW W.ONEFORALL.COM

Extra Features

Mode re-assignment

(How to set up two of the same devices on the KAMELEON 8)

t is possible to change the mode of any device key. This is useful if you want to

I

et up two of the same devices on the KAMELEON 8. The modified device key

s

ill display the applicable keys for the revised mode. The code can be set up

w
using the “Direct set up” (p. 12) or “Search method” (p. 13). To change a device
key, see the two examples below.

xample 1; if you like to program a second TV on the DVD key.

E

Example 2; if you like to program a second VCR on the SAT key.

Example 1:

To program a second Television on the DVD key (for example), you need to
change the DVD key into a TV key, so press:

(*) (**)(*) (**)

The DVD key has now become a second TV key and will
display the applicable keys for this mode.

Now enter the Set-Up code for your second TV by pressing:

_ _ _ _

Example 2:

To program a second Video Recorder on the SAT key (for example), you need
to change the SAT key into a VCR key, so press:

(*) (**)

(TV Code) (**)

The SAT key has now become a second VCR key and will display the
applicable keys for this mode.

Now enter the Set-Up code for your second VCR by pressing:

_ _ _ _

- If you program a different device type on another key (e.g. second TV on
the DVD key) the original device key icon will remain, but the displayed
function keys will change to suit the new device mode. For example; if a
second TV is programmed on the DVD key, TV-text functions will be
displayed in DVD mode.

(VCR Code) (**)

Resetting a Device key

Example: To reset the DVD key to its original mode, press:

(*) (**)

(*) Press and hold the MAGIC key for about 3 seconds. The screen

will change to the setup screen.

(**) The animated IR Indicator will blink twice (the screen will

change to the setup screen).

WW W.ONEFORALL.COM 19

Extra Features

Volume Punch-Through

his feature allows you to adjust the volume of a certain mode (e.g. TV mode)

T

hile being in a different mode (e.g. VCR). If for example you’re watching a

w
programme on your Video, you can adjust the volume (a TV function) without
first pressing the TV key. The chart below lists some of the possibilities:

ast key pressed: You can control:

L
SAT : TV volume up and down, mute
DVD : TV volume up and down, mute
VCR : TV volume up and down, mute

VR : TV volume up and down, mute

P

D : TV volume up and down, mute

C
AUD : TV volume up and down, mute
LIGHT : TV volume up and down, mute

xample: To punch through to AUD volume, being in any other mode

E
(e.g. VCR, SAT or DVD mode):

. Press and hold the MAGIC key for about 3 seconds. The screen will

1

change to the setup screen.

. Press VOLUME.

2

3. Then press the AUD key and the animated IR Indicator will blink twice and

the remote will return to the setup screen.

Result: VOL+/- and MUTE wil be from AUD mode independent of the selected

device mode.

To cancel the “Volume Punch Through” per mode:

Example: to cancel the “Volume Punch Through” for the VCR mode:

1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.

2. Press VOLUME.

3. Then press the VOL- ( ) key.

4. Press VCR once. The IR Indicator will blink four times and the unit will

return to the SETUP screen.

Result: being in VCR mode, you will be able to control VOL+/- and MUTE
functions of your VCR (provided it has volume control).

To cancel the “Volume Punch Through” for all modes:

1. Press and hold the MAGIC key for about 3 seconds. The screen will

change to the setup screen.

2. Press VOLUME.

3. Then press the VOL+ ( ) key and the IR Indicator will blink four times

and the screen will return to the setup screen.

Result: In all modes the VOL+, VOL- and MUTE keys will now operate

the original functions again.

20 WW W.ONEFORALL.COM

Extra Features

Device Sleeptimer

f your device has a “Sleeptimer” function built in, you can access this function

I

ith your KAMELEON 8 remote. To do so:

w

1. Make sure your device is switched on.

. Press the device key TV (or SAT, DVD, VCR, PVR, CD, AUD).

2

3. Point the KAMELEON 8 at your device and press and release the MAGIC key

then press POWER. You should see the Sleeptimer activate on your device.

o increase the timer, simply press POWER again (within 10 seconds) until

T

he timer gets to the desired time.

t

- To deactivate the “Sleeptimer”, repeat steps 1 – 3 above. During step 3,

ontinue pressing POWER again (within 10 seconds) until the timer indicates

c

ero minutes.

z

- Depending on how you used sleeptimer on the original remote, you might
need to access sleeptimer in a different way (through menu for example).

KAMELEON 8 - Timer

The KAMELEON 8 – Timer function allows you to activate a <desired function>
from a specific <device mode> within a <specific amount of minutes>
(max. amount of timer is 60 minutes).

- The <desired function> can be an existing function within a specific mode, a
Macro, a Key Magic function or a Learned function.

Example: you want your TV to switch off after 45 minutes.

1. Press and hold the MAGIC key for about 3 seconds. The screen will

change to the setup screen.

2. Press OTHER.

3. Press 9 8 5 to enter the KAMELEON 8 –Timer programming mode.

The animated IR Indicator will blink twice.

4. Press TV to select the mode where the KAMELEON 8 – Timer function will
come from. The animated IR Indicator will blink twice.

5. Press the POWER key to select the desired function. The animated IR
Indicator will blink twice.

6. Now press 4 5 to enter the amount of minutes after which the <Desired
function> needs to be activated (e.g. for 5 min. press 05, max. up to 60).

7. Press ENTER. The animated IR Indicator will blink twice and the KAMELEON
8– Timer function will be activated.

- Invalid key presses during the programming of KAMELEON 8 - Timer will
be ignored.

- The <Desired function> can be any key except for Device keys, SCROLL,
ESC, ENTER and MAGIC.

- While the KAMELEON 8 – Timer is running, the IR animation will light
every 15 seconds.

- The KAMELEON 8 –Timer function is cancelled by setting up a new
KAMELEON 8 – Timer function.

- If no key is pressed while setting up a KAMELEON 8 – Timer function,
the remote will return to user mode after 30 seconds.

- The SCROLL key can be accessed any time during programming if
applicable in the current device mode.

WW W.ONEFORALL.COM 21

Extra Features

Macros (sequence of commands)

acros (direct)

M

ou can program your KAMELEON 8 to issue a sequence of commands at the

Y
press of one button. For example, you may want to turn off your TV, VCR and
Satellite at the same time. Any sequence of commands you regularly use can be

educed to one key stroke for your convenience. A key that is programmed with

r

Macro works through all modes (provided it’s accessible in that mode).

a
Therefore a Macro can best be set on either the I, II, III or IV key. However, you
can install a Macro on any key (provided it’s accessible in that mode), except for

he device keys (TV, SAT, DVD, VCR, PVR, CD, AUD and LIGHT), MAGIC, ESC,

t

NTER and the SCROLL key.

E

Example: To set up a Macro that switches off your TV, VCR and SAT on the

I” key on your KAMELEON 8:

“

1. Press and hold the MAGIC key for about 3 seconds. The screen will
change to the setup screen.

. Press MACRO.

2

. Press the device key (e.g. TV) to display all keys of the mode.

3

4. Then press the key to which the Macro will be assigned, in this case
the “I” key.

5. Next press TV, POWER, VCR, POWER, SAT, POWER.

6. To store the Macro, press ENTER. The screen will return to the setup screen.

Result: Whenever you press the “I” key, the KAMELEON 8 will turn off your TV,

VCR and Satellite receiver.

- Each MACRO can consist of a maximum of 22 keystrokes.

- To include a function from a particular screen in a mode,
use the SCROLL key.

- Make sure that you program a Macro on a spare key that you don’t use in
any mode.

- Once you program a Macro on a specific key, the sequence will work
regardless of the mode (TV, SAT, DVD, VCR, PVR, CD, AUD or LIGHT) you are
using (if the label is the same as the label on which the Macro was
programmed). This means that the function picked on that specific key
will be sacrificed.

- To avoid accidental recordings with the KAMELEON 8, you must press the
RECORD key twice to begin recording. Please note that if you assign a
Macro or Shifted Macro to the RECORD key, this will deactivate the double
key press. Therefore we recommend not to assign a Macro to this key.

- If you had to hold down a key for a few seconds on the original remote
control to get a function, this function may not work in a macro on your
KAMELEON 8 remote.

- Keys such as (TV) menu, (TV) guide etc. will not change screen when pressed
during Macro programming.

- Upon changing the batteries your Macro(s) will be retained.

- If you program a Macro on a key, the original function will become shifted
(excluding POWER, CH+/- and VOL+/- keys). Press MAGIC then the key to
access it. If you place a Macro on a digit key, access the original function by
pressing MAGIC twice and then the digit key.

- You can replace a Macro by placing another Macro on top.

22 WW W.ONEFORALL.COM

Extra Features

Shifted Macros

It is also possible to place a shifted Macro on a key to maintain

he original function. The MAGIC key can be used as “SHIFT-function”.

t

Example: To set up a Shifted Macro that switches off your TV, VCR and SAT
on the “RED” key on your KAMELEON 8: (so that you will keep the original

unction on the “RED” key).

f

AGIC* MACRO TV MAGIC “Red” ENTER

M

Now every time you press ”MAGIC”, then the ”red” key, the KAMELEON 8 will

urn off your TV, VCR and Satellite.

t

- If a Shifted Macro is placed on the POWER, CH+/- or VOL+/- keys, the

leeptimer and Colour/Brightness features will be sacrificed.

S

TV, POWER,

VCR, POWER,

SAT, POWER

To erase a (direct) Macro from a key

Example: To erase the Macro from the “I” key, press:

MAGIC* MACRO TV “I” ENTER

To erase a (shifted) Macro

Example: To erase the Shifted Macro from the ”red” key press:

MAGIC* MACRO TV MAGIC ”red” ENTER

To erase all Macros in all modes

MAGIC* MACRO ENTER

(*) Press and hold the MAGIC key for about 3 seconds.

The screen will change to the setup screen.

WW W.ONEFORALL.COM 23

Extra Features

Code Upgrade Technology

our KAMELEON 8 contains a unique feature, which allows new codes to

Y

e added simply by holding it to your telephone. In a matter of seconds,

b
our magnetic coupling technology quickly and reliably transfers information
to the KAMELEON 8 without complex plugs, adapters or attachments.
This means, as you buy new products in the future, the KAMELEON 8 will never

ecome obsolete.

b

Internet download

(Upgrade your KAMELEON 8 remote…via your PC)

. Visit our website “www.oneforall.com”.

1

2. Select your region.

3. Select “Product support”.

4. Select “Universal Remote
Controls”.

5. Select the ONE FOR ALL remote

ou want to upgrade:

y
KAMELEON 8 (URC-8308).

6. Select ‘Internet Download’.

Now you have entered our special Online Download section. From this
point just follow the instructions on the screen for easy upgrade of your
remote.

Phone upgrade

(Upgrade your KAMELEON 8 remote…via your phone)

Alternatively ring our consumer help-line and one of our customer service
representatives will assist you through the entire process of upgrading your
KAMELEON 8. To ensure the process goes smoothly, here are a few steps to
follow:

1. Write down the brand name(s) and model number(s) of your device(s)
in the space provided on the Consumer Service page before you call.

2. Ring our consumer help-line and explain which device(s) you would like
added to your KAMELEON 8.

3. After our customer service agent records the brand name(s) and model
number(s) of your device(s), he/she will lead you through the set up
procedure and then will ask you to hold the KAMELEON 8 to the speaker
portion of your telephone (see diagram below). In doing this, the informa­tion needed for your device is transferred through the telephone into your
KAMELEON 8 in a matter of seconds.

Please note, cordless telephones, speaker telephones and mobile
telephones are not recommended.

4. After your KAMELEON 8 has

been upgraded by telephone,
stay on the line. Our customer
service agent will ensure that your
KAMELEON 8 is working properly
with your device(s) and will answer
any other questions you may have.

24 WW W.ONEFORALL.COM

Extra Features

Colour & Brightness

epending on the functions of your original remote control, the KAMELEON 8

D

an operate the colour and brightness settings of your Television.

c

o adjust the colour:

T

Press the MAGIC key followed by Volume + (for colour +) or

olume - (for colour -).

V

To adjust the brightness:
Press the MAGIC key followed by Channel + (for brightness +) or

hannel - (for brightness -).

C

epending on how you used colour and brightness on the original remote, you

D
may need to access colour and brightness in a different way (through menu for
example).

Trouble-Shooting

Problem & Solution

Problem:

Your brand is not listed in the
code section?

The KAMELEON 8 does not
operate your device(s)?

The KAMELEON 8 is not
performing commands
properly?

Problems changing channels?

Video / PVR / DVD / CD / AUD
not recording?

The KAMELEON 8 does not
respond after pressing a key?

Your original remote had a
“20” key?

Upon each key press, the IR
indicator will blink 5 times?

You are not able to enter
programming mode?

Solution:

Try the search method on page 13.

A) Try all the codes listed for your brand.
B) Try the search method on page 13.

You may be using the wrong code. Try
repeating the Direct Set-Up using another
code listed under your brand or start the
search method over again to locate the
proper code.

Enter the program number exactly as you
would on your original remote.

As a safety feature on your KAMELEON 8,
you must press the Record key twice.

Make sure you are using new batteries and
are aiming the KAMELEON 8 at your
device.

You can find this function on the AV key.

Replace batteries with 4 fresh, new
“AAA/LR03” alkaline batteries.

Replace batteries with 4 fresh, new
“AAA/LR03” alkaline batteries.

WW W.ONEFORALL.COM 25

Trouble-Shooting

Customer Service

f you still have questions about the operation of your ONE FOR ALL KAMELEON

I

universal remote and could not find the answer(s) in the Trouble-Shooting

8

section (page 25), you may want to contact the customer service department for
assistance.

ou may care to visit our Internet-site: www.oneforall.com

Y

ur internet-site has many advantages:

O

- 24 hours access

no waiting time

-

page for Frequently Asked Questions

-

- info about the ONE FOR ALL product range

efore contacting us, by Fax, E-mail or Phone, make sure you have the

B

equired information available by filling in the table below.

r

What do we need to know before you contact us:

That you have the ONE FOR ALL KAMELEON 8 URC-8308 (*)

1

niversal remote.

u

The date of purchase (.........../.........../...........).

2

3 A list of your equipment/models: (see example below).

Device Brand Device Remote SET-UP

TV Sony KV-25C5D RM-883 1505 (example)

model nr. model nr. code

Type/model numbers can often be found in your equipment
owner’s manual or on the factory plate behind the device.

4. Then Fax, E-mail or Dial us:

In the UK

E-mail : [e-mail] (***)
Fax : [phone]
Tel. : [phone] (£ 0,50 per minute) (*) (**)

In Ireland In Australia

E-mail : [e-mail] (***) E-mail : [e-mail] (***)
Fax : [phone] Fax : [phone]
Tel. : [phone] (*) (**) Tel. : [phone]

In South Africa In New Zealand

E-mail : [e-mail] E-mail : [e-mail] (***)
Fax : [phone] Fax : [phone]
Tel. : [phone] Tel. : 0508 ONE 4 ALL (663 4 255)
Tel. : [phone]

(*) When you call us you will be asked to enter a URC-number.

The URC-number of your KAMELEON 8 is 8308.

(**) When calling with a mobile phone:

- You may be charged extra when calling us from; the UK or
France.

- You may not be able to contact us when calling from; Belgium,
the Netherlands, Luxemburg, Greece, Portugal, Switzerland,
Italy, Ireland or Austria.

(***) Just send a blank message, you’ll get a form to be filled out as

auto-reply.

26 WW W.ONEFORALL.COM

INDHOLDSFORTEGNELSE

OM DIN KAMELEON 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ATTERIER

B

ASTATURET

T

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

D

a

sk

n

0 - 37

9

• PROGRAMMERING AF KAMELEON 8

Hvordan du programmerer KAMELEON 8 til at styre dine apparater)

(

Søgemetode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

•

INSTALLATIONSKODER
TV : TV / LCD / Plasma / Projektor / Bagprojektions-TV

CR : Videooptager / Kombineret TV og videooptager

V
SAT : Satelllitmodtager / Set-Top-boks / DVB-S / DVB-T /

CBL : Kabeldekodere / Set-Top-boks / DVB-C
VAC : Videotilbehør som Media Centre ol.
C
PHO : Grammofon
MIS : Audio / Diverse audioudstyr
HOM : Hjemmeautomatik (f.eks. motorstyrede gardiner / fjernbetjente

AMP : Forstærkere
TUN : Tunere / Receivere / Home Cinema udstyr
CAS : Kassetteafspillere
LDP : Laser Disc afspillere
DAT : Digital Audio Tape (DAT) afspillere
DVD : DVD afspillere / DVD Home Cinema / DVD med harddisk /

PVR : Personlig videooptager

KODEBLINK METODEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

(For at finde den kode der aktuelt er programmeret)

HURTIG KODE REFERENCE

LÆREFUNKTION

(Hvordan man kopierer funktioner fra den originale fungerende
fjernbetjening til KAMELEON 8)

OPERATIONEL NULSTILLING

EKSTRA FUNKTIONER

PROBLEMLØSNING

atellitmodtager med harddisk

S

D : CD afspiller / Mini Disc

lyskontakter etc.)

kombinerede DVD og videomaskiner

• Key Magic (Programmering af manglende funktioner)

• Ændring af funktion (Hvordan man installerer to ens apparater
på KAMELEON 8)

• Volume "Punch-Through" funktion

• Apparat Sleeptimer

• KAMELEON 8 TIMER

• Macroer (serie af kommandoer)

• Kode opgraderingsteknologi

• Farve og lysstyrke

• Problem & løsning

• Kundeservice

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

. . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

. . . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . .44

38

261
2

2
279
280
2
280
281

281
281
281
282
283
283

283
288

9

72

75

80

Anvend OneForAll Web-guiden til at programmere din fjernbetjening via
Internettet. Guiden viser hvordan du installerer forskelligt udstyr uden at
læse hele manualen. Du finder dette nemme opsætningsværktøj på
www.oneforallwebwizard.com.

WW W.ONEFORALL.COM 27

Om din KAMELEON 8

Unikt "EL" display for nem betjening

Ved at vælge ONE FOR ALL KAMELEON 8 universal fjernbetjening har du også

algt nem betjening. Din KAMELEON 8 har et unikt, brugervenligt selvlysende

v

isplay der sikrer at du har adgang til alle de knapper du har brug for, mens de

d
knapper der ikke skal bruges, skjules. Den høje kvalitet sikrer en lang levetid.
Når batterierne isættes vil KAMELEON 8 være i "demo-mode" og vise forskellige
tastaturopsætninger. Annuller "demo-mode" ved at programmere fjernbetjenin-

en (tryk på og hold MAGIC i ca. 3 sekunder og tryk derefter på ESC).

g
Efter udskiftning af batterierne lyser displayet først op når en tast aktiveres.
Derefter vil displayet automatisk lyse op når fjernbetjeningen tages op (ved
berøring af skærm og fjernbetjening samtidig). Det er muligt at ændre aktive-

ingsmetoden til aktivering ved tastetryk. For at opsætte "EL" displayet til

r

ktivering ved tastetryk, se side 32 afsnit: "EL" skærm aktiveringsindstilling.

a

ontroller op til 8 apparater

K

in KAMELEON 8 er designet så du kan bruge én fjernbetjening til at styre alt

D
dit video og audio udstyr og alt andet udstyr som styres af infrarøde signaler.
Din KAMELEON 8 leveres med 2 IR (infrarøde) sendere med lang rækkevidde og

an håndtere frekvenser op til 450 kHz. Du kan vælge enhver kombination af op

k

il 8 apparater som du vil styre.

t

V: TV / LCD / Plasma / Projektor / Bagprojektions-TV

T

SAT: Satelllitmodtager / Set-Top-boks / Kabel dekoder / Video tilbehør

(f.eks. Media Center)

DVD: DVD afspillere / DVD Home Cinema / DVD med harddisk / kombinerede

DVD og videomaskiner / Laser Disc afspiller

VCR: Videooptager / Kombineret TV og videooptager / Kassetteafspiller / DAT

afspiller

PVR: Personlig videooptager / Harddisk optager

CD: CD afspiller / Mini Disc /Grammofon / Hjemmeautomatik (f.eks.

motorstyrede gardiner)

AUD: Audio / Audio receiver/tuner/forstærker / (DVD) Hjemmebiograf

LIGHT: IR kontrollerede lyskontakter - KAMELEON 8 har også en "LIGHT"

funktion til styring af strømmoduler der anvendes af Light Control
dedikerede adresserbare 433,92 protokol. Denne funktion sender
infrarøde kommandoer til modtageren i "ONE FOR ALL Light Control
Starters Kit - HC-8300" der sælges separat. Modtageren konverterer det
infrarøde signal til radiofrekvens (RF) der kan modtages af
strømmodulerne til tænd/sluk og dæmpning af lyset.

For at kunne anvende Light Control

TM

med din KAMELEON 8 må
du anskaffe "ONE FOR ALL Light ControlTMStarters Kit ­HC-8300".

TM

M

T

28 WW W.ONEFORALL.COM

Om din KAMELEON 8

Indlæringsfunktion

KAMELEON 8 er udstyret med en unik "indlæringsfunktion" som betyder at du

an kopiere en næsten hvilken som helst funktion (maks. 50) fra din originale

k

operative) fjernbetjening til din nye KAMELEON 8 (Se indlæringsfunktioner på

(
side 41). Det er praktisk hvis du, efter at have programmeret din KAMELEON 8,
fortsat savner nogle funktionstaster som findes på din originale fjernbetjening.

acro (sekvens af kommandoer)

M

Din KAMELEON 8 er udstyret med en letanvendelig Macro funktion, som giver
dig mulighed for at udføre en række kommandoer ved et tryk på én enkelt
knap (f.eks. tænde eller slukke nogle få apparater). Du kan bruge specifikke

aster (I, II, III, IV) til denne funktion. Når du har programmeret en macro på en

t

f disse taster, vil sekvensen blive udført ved alle indstillinger.

a

ode opgraderingsteknologi.

K

in ONE FOR ALL KAMELEON 8 tilbyder også en kode opgraderingsteknologi.

D
Denne teknologi giver dig mulighed for at tilføre fjernbetjeningen nye koder.
Hvis dit apparat styres af en speciel kode, som ikke findes i hukommelsen til

AMELEON 8 (ved brug af "Direkte installation med kode" på side 38 eller

K

Søgemetoden" på side 39) Takket være denne teknologi vil din KAMELEON 8

"
aldrig blive forældet.

Batterier

Bemærk: når batterierne isættes vil KAMELEON 8 være i "demo-mode"
(viser forskellige tastatur opsætninger). KAMELEON 8 vil automatisk gå
ud af demo-mode når den programmeres.

Din KAMELEON 8 bruger 4 stk. AAA/LR03 alkaline batterier.

1. Åben batteridækslet ved hjælp af en mønt.

2. Isæt batterierne med plus-enden vendende opad.

3. Sæt batteridækslet på igen.

Batteriindikator

Når batterierne løber tør for strøm vil KAMELEON 8 indikere dette.
IR indikatoren vil blinke 5 gange når du trykker på en tast og du kan ikke
få adgang til programmeringsfunktionen.
Udskift venligst batterierne med 4 nye AAA/LR03 alkaline batterier.

WW W.ONEFORALL.COM 29