One For All SV9601 Instruction manual
SV9601
Instruction Manual
English
Guarantee English UNIVERSAL ELECTRONICS / ONE FOR ALL warrants to the original purchaser that this product will
be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the
date of original purchase. This product will be repaired or if necessary replaced free of charge if it has been proven to be
defective within the one (1) year warranty period. The forwarding costs are on the account of the owner; the costs of
returning the product are on the account of UNIVERSAL ELECTRONICS / ONE FOR ALL.
This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL
ELECTRONICS / ONE FOR ALL, or which result from not mounting the product according to manual instructions. This also
applies when the product has been modified / repaired by others than UNIVERSAL ELECTRONICS / ONE FOR ALL or if a
fault is the result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper
maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness.
To obtain warranty service during the warranty period, please notice that we need your original purchase receipt so that
we may establish your eligibility for service. If you have bought this product for purposes which are not related to your
trade, business or profession, please remind that you may have legal rights under your national legislation governing
the sale of consumer goods. This guarantee does not affect those rights.
Official NOTE:
- Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. In English
this means; For safety reasons, please ensure that the power plug (to mains) is easily accessible (not blocked or
covered) so it can be used to disconnect the device.
- Please ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
- Please ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers,
tablecloths, curtains, etc.
- Do not place near naked flame sources, such as lighted candles.
- To reduce the risk of fire or electric shocks do not expose this apparatus to rain or moisture, dripping or splashing.
- Use the apparatus only in moderate climates (not in tropical climates).
Universal Electronics BV
Europe & International
P.O. Box 3332
7500 DH, Enschede
The Netherlands
SV 9601
709660
RDN-1230913
SV_9601_Opmaak 1 23-09-13 09:34 Pagina 1
THANK YOU
T
hank you for purchasing the ONE FOR ALL Signal Amplifier. ONE FOR ALL continuously
s
trives to develop, produce and market high-quality innovative products to meet your needs.
We hope this Signal Amplifier will give you total satisfaction.
THE PRODUCT
T
he ONE FOR ALL Signal Amplifier is designed to boost the signal of your aerial or cable box,
this allows you to distribute the signal to multiple devices and/or use longer cables without
losing picture and sound quality.
B
elow you’ll find the description of your ONE FOR ALL Signal Amplifier (see picture 1).
A
. Power adapter (power plug)
B
. Power adapter input
C
. Signal input
D. Signal outputs
E. LED indicator (ON / OFF)
F
. Holes for wall mounting
G. Space for foam feet
CONNECTING THE SIGNAL AMPLIFIER
To connect your ONE FOR ALL Signal Amplifier, please follow the steps below:
• Stick the foam feet at the bottom of the ONE FOR ALL Signal Amplifier (G).
• Connect your TV or other device to the signal output (D)
• Connect your aerial / cable TV coaxial cable or other device (see picture 2) to the input
(C) on the ONE FOR ALL Signal Amplifier.
• Plug the power adapter to the input (B) on the ONE FOR ALL Signal Amplifier.
• Plug the power adapter into the mains (A).
• Check if the LED indicator illuminates (E).
Wall mount installation
• You can use the holes at the back of the ONE FOR ALL Signal Amplifier for wall mount
installation (F).
Examples of different situations (pictures 2 – 5):
An aerial coaxial cable (Freeview) or coaxial cable for your cable TV (DVB-C / DVB-C2) is
connected to the input (IN) of the ONE FOR ALL Signal Amplifier. The signal will be
boosted and distributed to 1 TV or another device.
The coaxial output of a TV receiver (Freeview / DVB-C / DVB-C2) is connected
to the input (IN) of the ONE FOR ALL Signal Amplifier. The signal will be boosted
and distributed for 1 TV or another device.
An aerial coaxial cable (Freeview) or coaxial cable for your cable TV (DVB-C / DVB-C2) is
connected to the coaxial input of a TV receiver, which is connected to the HDD / DVD
recorder. The coaxial output of the HDD / DVD recorder is connected with the input (IN)
of the ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed to 1 TV
or another device.
The FM aerial is connected to the input (IN) of the ONE FOR ALL Signal Amplifier which
will boost the signal and distribute it to 1 radio tuner.
(*) It may be possible that you have to use inline coax-connectors to make the connections.
(See picture).
HELPFUL HINTS
If the picture or sound quality is unsatisfactory, please follow the helpful hints below:
• If the incoming signal is unclear, the ONE FOR ALL Signal Amplifier will not improve your
picture as it will also amplify the noise in the signal. Please contact your aerial / cable TV
installer for further details.
• Check all the connections. Loose or bad connections will result in an unclear picture.
*
2
HDD / DVD
recorder
STB
STB
5
4
3
B
G
C
D
E
F F
G
1
TV
TV
TV
Radio
A
1
2
3
4
5
SV_9601_Opmaak 1 23-09-13 09:34 Pagina 2
Loading...