Omron XS5M, XS5P, XS5G, XS5C, XS5R Datasheet

NEW

New Assembly Connectors Added to the Lineup.
Many Sensors for Easier Application.

XW3D

XS5M

XS5P

NEW

XS5G

NEW

XS5C

XS5R

XS5

XS5

Round Water-resistant Connectors

Simple, Twist-and-Click Connection.
Meet the Next-generation
M12 Connector!

XW3D

Connector Terminal Boxes

XS5

Problem

It's troublesome to screw the connectors together.

1

Problem

There's nothing to tell you that it's
connected.

2

Problem

It's difficult to keep track of locking torque values.

4

3

The simple, XS5 Connector is completely compatible with conventional
screw-type M12 connectors.

The connector solves the problems of previous screw-type connectors.

A simple twist is all it takes to connect the Smartclick XS5, making it an ideal next-generation M12
connector. It's also easy to introduce to existing facilities because it takes only 1/4 the time of
ordinary wiring processes, and it's compatible with conventional, screw-type connectors.

Patent Pending

It's a twist-and-click connection.

Solution

Twist-and-clickconnection

Screw connection

Screw connection

Screw connection

All combinations are connectable.

The Smartclick XS5 "clicks"
to tell you it's connected.

Solution

Solution

Click!

Click!

Insert all the
way in.

1/8th of a turn

An innovative new lock structure makes connection extremely simple. The lock
mechanism is internal, so it will no longer become jammed by sputtered fluids or
dust. Also, the use of a movable lock bolt makes it possible to connect the
Smartclick XS5 to a screw-type M12 connector.

XS5 Smartclick Socket
Connector

XS5 Smartclick
Plug Connector

M12 socket connector

M12 plug connector

A positive clicking feel tells you for sure that the
Connector is securely locked.

Locking is done with approxi­mately 1/8th of a turn.

Problem

The connection sometimes
vibrates loose.

A bayonet lock mechanism is used.

Solution

By using a bayonet mechanism, which is a common
locking method, the Smartclick XS5 eliminates any
concerns about loosening.

The Smartclick XS5 has the industry's
shortest locking rotation of 1/8th of a
turn. There's no need to keep
track of locking torque, and
this greatly reduces time
and effort when wiring.

Note: is a registered trademark of the OMRON Corporation.

New Product

4

Round Water-resistant Connectors

XS5

Round Water-resistive Smartclick
Connectors That Reduce Installation
Work

• A newly developed lock mechanism that is compatible with
round M12 connectors.

• Simply insert the Connectors, then turn them approximately
1/8 of a turn to lock.

• A positive click indicates locking.

• Features the same degree of protection (IP67) as M12
connectors.

• A full line-up of models is planned.

• Connectors with Cables are UL approved.

Ratings and Specifications

Recommended Cables

Materials and Finish

Connection Combinations

Rated current 4 A

Rated voltage 250 VDC

Contact resistance (connector) 40 mΩ max. (20 mV max., 100 mA max.)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength (connector)

1,500 VAC for 1 min (leakage current:
1 mA max.)

Degree of protection IP67 (IEC60529)

Insertion tolerance 50 times min.

Lock strength Tensile: 100 N/15 s, Torsion: 1 N·m/15 s

Cable holding strength 100 N/15 s (for cable diameter of 6 mm)

Lock operating force 0.1 N·m to 0.25 N·m

Ambient operating tempera­ture range

−25 to 70°C

Cable outer

diameter (mm)

Core sizes

Crimping

models

Soldering

models

Screw-on

models

8 mm 7 to 8 mm

--- ---

0.18 to 0.75 mm

2

7 mm 6 to 8 mm

6 mm 5 to 6 mm

Two types of con­tacts are available.

0.18 to 0.3 mm

2

0.5 to 0.75 mm

2

0.5 mm2 max.4 mm 4 to 5 mm

3 mm 3 to 4 mm

Item Model XS5F/H/W/R XS5M/P XS5C/G

Con­tacts

Materials Phosphor bronze Brass

Finish Nickel base, 0.4-µm gold plating

Fixtures Nickel-plated zinc alloy

Pin block PBT resin (UL94V-0)

O-ring Rubber

Overmolding/
Cover

Polyester elas­tomer

---

PBT resin
(UL94V-0)

Cable

Standard
cable

UL AWM2464,
6-mm dia.
4 cores × AWG20
(0.12/49)

---

Vibration­proof
robot
cable

UL AWM2464,
6-mm dia.
4 cores × AWG20
(0.08/110)

---

Oil-resis­tant poly­urethane
cable

6 dia.
4 cores × 0.5 mm

2

(0.12/45)

---

Seal resin ---

Epoxy resin
(UL94V-0)

---

Power supply
wires

--- UL1007 AWG20 ---

is a registered trademark of the OMRON Corporation.

OMRON model no.

Smartclick Plug Connectors M12 Plug Connectors

XS5H, XS5G,
XS5W (plug side),
XS5R (plug side), XS5M

XS2H, XS2G,
XS2W (plug side),
XS2R (plug side), XS2M

Smartclick Socket
Connectors

XS5F, XS5C,
XS5W (socket side)
XS5R (socket side)
XS5P

 ❍

M12 Socket
Connectors

XS2F, XS2C,
XS2W (socket side),
XS2R (socket side),
XS2P

❍❍

: Connected by .

❍: Connected by screwing.

Note: The XS@M and XS@P

cannot mate with each
other.

XS5

5

XS5W Connectors Connected to Cable, Socket and Plug on Cable Ends

Dimensions (Unit: mm)

Note: The overmolding on the Standard Cable (XS5W-D42@-@81-A) and the Oil-resistant Polyurethane Cable (XS5W-D42@-@81-P) is black, and

the overmolding on the Vibration-proof Robot Cable (XS5W-D42@-@81-F) is warm gray.

● Standard Cable XS5W-D42@-@81-A

●

Vibration-proof Robot Cable XS5W-D42@-@81-F

●

Oil-resistant Polyurethane Cable XS5W-D42@-@81-P

40.7

L (Cable length)

44.7

6 dia.

M12

Straight/straight

L (Cable length)

32.3

28.3

6 dia.

M12

Angled/angled

L (Cable length)

28.3

44.7

6 dia.

M12

Angled/straight

1
2
3
4

1
2
3
4

Terminal No.

Brown
White
Blue
Black

Cable color of
core sheath

Wiring Diagram for 4 Cores

L (Cable length)

32.3

40.7

6 dia.

M12

Straight/angled

XS5

6

Model Number Legend

1. Type

W: Connector connected to cable, plug on cable

ends

2. Mating Section Form

D: DC

3. Connector Poles

4: 4 poles

4. Contact Plating

2: 0.4-µm gold plating

5. Cable Connection Direction

1: Straight/straight
2: Angled/angled
3: Straight (XS5F)/angled (XS5H)
4: Angled (XS5F)/straight (XS5H)

6. Cable Length

C: 1 m D: 2 m E: 3 m
G: 5 m J: 10m

7. Connections

8: A Brown, B White, C Blue, D Black (Numbers

inside circles are terminal numbers)

8. Connectors on One End/Both Ends

0: Both ends

9. Cable Specifications

A: Standard Cable
F: Vibration-proof Robot Cable
P: Oil-resistant Polyurethane Cable

Ordering Information

Use this model number legend to identify products
from their model number. When ordering, use a mod­el number from the table in Ordering Information.

XS5W-D42@-@81-@

83 4

2 6 951

7

Cable specifi-

cations

Cable

length L (m)

Straight/straight Angled/angled

Minimum

order

UL

Model

Standard Cable

1 XS5W-D421-C81-A ---

10

Yes

2 XS5W-D421-D81-A XS5W-D422-D81-A

3 XS5W-D421-E81-A ---

5 XS5W-D421-G81-A XS5W-D422-G81-A

5

10 XS5W-D421-J81-A ---

Vibration-proof

Robot Cable

1 XS5W-D421-C81-F ---

102 XS5W-D421-D81-F ---

3 XS5W-D421-E81-F ---

5 XS5W-D421-G81-F ---

5

10 XS5W-D421-J81-F ---

Oil-resistant

Polyurethane

Cable

2 XS5W-D421-D81-P ---

10

---5 XS5W-D421-G81-P ---

10 XS5W-D421-J81-P --- 5

Cable specifi-

cations

Cable

length L (m)

Straight/angled Angled/straight

Minimum

order

UL

Model

Standard Cable

2 XS5W-D423-D81-A XS5W-D424-D81-A 10

Yes

5 XS5W-D423-G81-A XS5W-D424-G81-A 5

XS5

7

XS5F Connector Connected to Cable, Socket on One Cable End

Dimensions (Unit: mm)

Note: The overmolding on the Standard Cable (XS5F-D42@-@80-A) and the Oil-resistant Polyurethane Cable (XS5F-D42@-@80-P) is black, and

the overmolding on the Vibration-proof Robot Cable (XS5F-D42@-@80-F) is warm gray.

Model Number Legend

Ordering Information

● Standard Cable XS5F-D42@-@80-A

●

Vibration-proof Robot Cable XS5F-D42@-@80-F

●

Oil-resistant Polyurethane Cable XS5F-D42@-@80-P

Cable specifica-

tions

Cable length

L (m)

Straight Connectors Angled Connectors

Minimum

order

UL

Model

Standard Cable

1 XS5F-D421-C80-A XS5F-D422-C80-A

10

Yes

2 XS5F-D421-D80-A XS5F-D422-D80-A

3 XS5F-D421-E80-A XS5F-D422-E80-A

5 XS5F-D421-G80-A XS5F-D422-G80-A

5

10 XS5F-D421-J80-A XS5F-D422-J80-A

Vibration-proof

Robot Cable

1 XS5F-D421-C80-F XS5F-D422-C80-F

102 XS5F-D421-D80-F XS5F-D422-D80-F

3 XS5F-D421-E80-F XS5F-D422-E80-F

5 XS5F-D421-G80-F XS5F-D422-G80-F

5

10 XS5F-D421-J80-F XS5F-D422-J80-F

Oil-resistant

Polyurethane Cable

2 XS5F-D421-D80-P XS5F-D422-D80-P 10

---5 XS5F-D421-G80-P XS5F-D422-G80-P

5

10 XS5F-D421-J80-P XS5F-D422-J80-P

Straight

6 dia.

40.7

L (Cable length)

50

30 5

M12

14.9 dia.

1
2
3
4

Brown
White
Blue
Black

Terminal No.

Cable color of
core sheath

Wiring Diagram for 4 Cores

6 dia.

25.3

28.3

L (Cable length)

50

30 5

Angled

Use this model number legend to identify products
from their model number. When ordering, use a mod­el number from the table in Ordering Information.

XS5F-D42@-@80-@

83 4

2 6 951

7

1. Type

H: Connector connected to cable,

plug on one cable end

2. Mating Section Form

D: DC

3. Connector Poles

4: 4 poles

4. Contact Plating

2: 0.4-µm gold plating

5. Cable Connection Direction

1: Straight
2: Angled

6. Cable Length

C: 1 m D: 2 m E: 3 m
G: 5 m J: 10 m

7. Connections

8: A Brown, B White, C Blue,

D Black (Numbers inside circles are

terminal numbers.)

8. Connectors on One End/Both Ends

0: One end

9. Cable Specification

A: Standard Cable
F: Vibration-proof Robot Cable
P: Oil-resistant Polyurethane Cable

XS5

8

XS5H Connector Connected to Cable, Plug on One Cable End

Dimensions (Unit: mm)

Note: The overmolding on the Standard Cable (XS5H-D42@-@80-A) and the Oil-resistant Polyurethane Cable (XS5H-D42@-@80-P) is black, and

the overmolding on the Vibration-proof Robot Cable (XS5H-D42@-@80-F) is warm gray.

Model Number Legend

Ordering Information

● Standard Cable XS5H-D42@-@80-A

●

Vibration-proof Robot Cable XS5H-D42@-@80-F

●

Oil-resistant Polyurethane Cable XS5H-D42@-@80-P

Cable specifica-

tions

Cable length

L (m)

Straight Connectors Angled Connectors

Minimum

order

UL

Model

Standard Cable

0.3 XS5H-D421-A80-A XS5H-D422-A80-A

10

Yes

1 XS5H-D421-C80-A XS5H-D422-C80-A

2 XS5H-D421-D80-A XS5H-D422-D80-A

5 XS5H-D421-G80-A XS5H-D422-G80-A 5

Vibration-proof

Robot Cable

0.3 XS5H-D421-A80-F XS5H-D422-A80-F

101 XS5H-D421-C80-F XS5H-D422-C80-F

2 XS5H-D421-D80-F XS5H-D422-D80-F

5 XS5H-D421-G80-F XS5H-D422-G80-F 5

Oil-resistant

Polyurethane Cable

0.3 XS5H-D421-A80-P XS5H-D422-A80-P
10

---2 XS5H-D421-D80-P XS5H-D422-D80-P

5 XS5H-D421-G80-P XS5H-D422-G80-P 5

44.7
6 dia.

L (Cable length)

50

30 5

M12

1
2
3
4

Brown
White
Blue
Black

Terminal No.

Cable color of
core sheath

L (Cable length)

6 dia.

M12

50

30 5

32.3

25.3

Wiring Diagram for 4 Cores

Angled

Straight

Use this model number legend to identify products
from their model number. When ordering, use a mod­el number from the table in Ordering Information.

XS5H-D42@-@80-@

83 4

2 6 951

7

1. Type

H: Connector connected to cable,

plug on one cable end

2. Mating Section Form

D: DC

3. Connector Poles

4: 4 poles

4. Contact Plating

2: 0.4-µm gold plating

5. Cable Connection Direction

1: Straight
2: Angled

6. Cable Length

A: 0.3 m C: 1 m D: 2 m
G: 5 m

7. Connections

8: A Brown, B White, C Blue,

D Black (Numbers inside circles

are terminal numbers)

8. Connectors on One End/Both
Ends

0: One end

9. Cable Specifications

A: Standard Cable
F: Vibration-proof Robot Cable
P: Oil-resistant Polyurethane

Cable

XS5

9

XS5G Assembly Connector Plugs

Dimensions (Unit: mm)

Ordering Information

Note: XS5G Screw-on Plugs cannot be connected to side by side to the CN1 and CN2 connectors of XS2R or XS5R Y-Joint Sockets/Plugs.

No. of

poles

Connection

method

Suitable cable dia.

(mm)

Straight Connectors Angled Connectors

Minimum order

Model

4

Crimping

6 mm (5 to 6) XS5G-D4C1 ---

50

4 mm (4 to 5)

XS5G-D4C3 ---

3 mm (3 to 4)

XS5G-D4C5 ---

Soldering

6 mm (5 to 6) XS5G-D421 XS5G-D422

4 mm (4 to 5)

XS5G-D423 XS5G-D424

3 mm (3 to 4)

XS5G-D425 XS5G-D426

Screw-on

6 mm (5 to 6) XS5G-D4S1 XS5G-D4S2

4 mm (4 to 5)

XS5G-D4S3 XS5G-D4S4

3 mm (3 to 4)

XS5G-D4S5 XS5G-D4S6

8 mm (7 to 8)

XS5G-D4S7 ---

7 mm (6 to 7)

XS5G-D4S9 ---

5 Screw-on

6 mm (5 to 6) XS5G-D5S1 ---

4 mm (4 to 5)

XS5G-D5S3 ---

3 mm (3 to 4)

XS5G-D5S5 ---

8 mm (7 to 8)

XS5G-D5S7 ---

7 mm (6 to 7)

XS5G-D5S9 ---

14.9 dia.

49.3

14.2 dia.

M12

XS5G-D4C@ (Crimping Model)
XS5G-D42@ (Soldering Model)
Straight Connectors

37.7

14.9 dia.

23

M12

XS5G-D42@ (Soldering Model)
Angled Connectors

58.7

16 dia.20 dia.

14.9 dia.

XS5G-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8 mm)
Straight Connectors

58.7

14 dia.20 dia.

14.9 dia.

XS5G-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6 mm)
Straight Connectors

39.7

39.6

20 dia.

14 dia.

XS2G-D@S@ (Screw-on Connectors)
Angled Connectors

XS5

10

XS5U (Crimping Pin for XS5G)

Dimensions (Unit: mm)

Ordering Information

Note: Orders are accepted in multiples of the minimum order.

Suitable core size (mm2) Model Minimum order

0.18 to 0.3 XS5U-3121
100

0.5 to 0.75 XS5U-3122

XS5U-312@
Plug Pin

2.3 dia.2 dia.

C dia.

1.5

1 dia.

B

Slit

A

* A special tool must be used for crimping. For details, refer to page 16.

Dimensions

Model

Suitable core

size (mm

2

)

Dimension (mm)

No. of

slits

A B C

XS5U-3121 0.18 to 0.3 22.6 6.1 0.8 1

XS5U-3122 0.5 to 0.75 22.7 6.2 1.3 0

XS5

11

XS5C Assembly Connector Sockets

Dimensions (Unit: mm)

Ordering Information

No. of

poles

Connection

method

Suitable cable dia.

(mm)

Straight Connectors Angled Connectors

Minimum order

Model

4

Crimping

6 mm (5 to 6) XS5C-D4C1 XS5C-D4C2

50

4 mm (4 to 5)

XS5C-D4C3 XS5C-D4C4

3 mm (3 to 4)

XS5C-D4C5 XS5C-D4C6

Soldering

6 mm (5 to 6) XS5C-D421 XS5C-D422

4 mm (4 to 5)

XS5C-D423 XS5C-D424

3 mm (3 to 4)

XS5C-D425 XS5C-D426

Screw-on

6 mm (5 to 6) XS5C-D4S1 XS5C-D4S2

4 mm (4 to 5)

XS5C-D4S3 XS5C-D4S4

3 mm (3 to 4)

XS5C-D4S5 XS5C-D4S6

8 mm (7 to 8)

XS5C-D4S7 ---

7 mm (6 to 7)

XS5C-D4S9 ---

5 Screw-on

6 mm (5 to 6) XS5C-D5S1 ---

4 mm (4 to 5)

XS5C-D5S3 ---

3 mm (3 to 4)

XS5C-D5S5 ---

8 mm (7 to 8)

XS5C-D5S7 ---

7 mm (6 to 7)

XS5C-D5S9 ---

XS5C-D4C@ (Crimping Model)
XS5C-D42@ (Soldering Model)
Straight Connectors

M12

43.4

14.9 dia.

14.2 dia.

M12

31.8

14.9 dia.

23

XS5C-D4C@ (Crimping Model)
XS5C-D42@ (Soldering Model)
Angled Connectors

54.9

20 dia.

14.9 dia. 16 dia.

XS5C-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 7 or 8 mm)
Straight Connectors

54.9

20 dia.

14.9 dia. 14 dia.

XS5C-D@S@ (Screw-on Connectors, Applicable Cable Outer Diameter: 3, 4, or 6 mm)
Straight Connectors

14.9 dia.

35.9

39.6

14 dia.

20 dia.

XS5C-D@S@ (Screw-on Connectors)
Angled Connectors

XS5

12

XS5U (Crimping Pin for XS5C)

Dimensions (Unit: mm)

Ordering Information

Note: Orders are accepted in multiples of the minimum order.

Suitable core size (mm2) Model Minimum order

0.18 to 0.3 XS5U-2221

100

0.5 to 0.75 XS5U-2222

XS5U-222@
Socket Pin

Slit

2.3 dia.2 dia.

C dia.

1.5

B

A

* A special tool must be used for crimping. For details, refer to page 16.

Dimensions

Model

Suitable core

size (mm

2

)

Dimension (mm)

No. of

slits

A B C

XS5U-2221 0.18 to 0.3 16.7 6.1 0.8 1

XS5U-2222 0.5 to 0.75 16.8 6.2 1.3 0

XS5

13

XS5R Y-Joint Plug/Socket Connectors

Dimensions (Unit: mm)

Ordering Information

Note: 1. Ask your OMRON representative about other specifications.

2. XS2G and XS5G Assembled Connectors with screw connections cannot be connected to both CN1 and CN2 at the same time.

Cable Connector Cable length (m) Model Minimum order

With cable

Connectors on both cable
ends

0.5 XS5R-D426-B11-F

5

1 XS5R-D426-C11-F

2 XS5R-D426-D11-F

3 XS5R-D426-E11-F

Connector on one cable end

2 XS5R-D426-D10-F

5 XS5R-D426-G10-F

With no cable Y-Joint Plug/Socket ---

XS5R-D426-1

10

XS5R-D426-5

XS5R-D426-@11-F
Connectors on Both Ends (Y-Joint Plug/Socket)

1
2
3
4

4
3
2
1

1
2
3
4

CN2

CN1

1
4

3

2

1

4

3
2

1

4

3
2

1
4

3

2

1
4

3

2

1

4

3
2

1

4

3
2

1
4

3

2

45.5

4.6 dia.

18.0

35.0

CN1

CN2

15.0

Blue marking

8.5

13.6

L (Cable len

g

th)

6 dia.

44.7

Wiring Diagram

XS5R-D426-@10-F
Connectors on One Cable End (Y-Joint Socket)

1
4

3

2

1
4

3

2

1
4

3

2

1
4

3

2

18.0

15.0

35.0

CN1

CN2

Blue marking

45.5

4.6 dia.

30

±5

50

+20

−10

5

±3

8.5

13.6

L (Cable length)

6 dia.

1
2
3
4

1
2
3
4

Black

Blue

White

Brown

CN2

CN1

Wiring Diagram

XS5R-D426-@
Y-Joint Plug/Socket without Cable

4
3
2
1

4
3
2
1

4
3
2
1

4
3
2
1

4
3
2
1

4
3
2
1

CN2

CN1

CN0

CN2

CN1

CN0

1
4

3

2

1
4

3

2

58.3

27

4.5 dia.

CN2

(37) 18

15

CN1

CN0

Blue marking

7

24.5

12.5

Wiring Diagram

XS5R-D426-1 XS5R-D426-5

XS5

14

XS5P Panel-mounting Sockets

Dimensions (Unit: mm)

Panel Cutout

Note: 1. The panel cutout dimension is the same for Front-locking

and Rearlocking Sockets.

2. Rotational positioning is not possible for connector rotation.

Wiring and Wire Specifications

Wiring

Wire Specifications

Ordering Information

XS5P-D426-5
Panel-mounting Sockets with Rear Locks

2

3

4

1

20

White

Brown

Black

Blue

18

(20)

500

22.1

11.9

2.5

14.6 dia.

PG9

2.8

M12

17

18

10

±3

XS5P-D427-5
Panel-mounting Sockets with Front Locks

2

3

4

1

M12

PG9

(20)

500

22.1

18

20

White

Blue

Brown

Black

17

18

10.5 2.5

10±3

13.9 dia.

2.8

Panel Cutout Dimension

Panel thickness = 1 to 4 mm

15.3

+0.1

0

dia.

Pin number Color

1Brown

2White

3Blue

4Black

Item Specification

Specification UL1007

Nominal size AWG20

Configuration

Number of wires 21

Wire diameter 0.18

Standard outer diameter 1.8

Type Lock Cable length (m) Model Minimum order

With cable

Rear lock

0.5

XS5M-D426-5

10

Front lock XS5M-D427-5

XS5

15

XS5M Panel-mounting Plugs

Dimensions (Unit: mm)

Panel Cutout

Note: 1. The panel cutout dimension is the same for Front-locking

and Rearlocking Sockets.

2. Rotational positioning is not possible for connector rotation.

Wiring and Wire Specifications

Wiring

Wire Specifications

Ordering Information

XS5M-D426-5
Panel-mounting Plugs with Rear Locks

2.8

M12

PG9

500

22.8

18

17

White

Brown

Blue

Black

18

20

10

2.8

10±3

(20)

2

3

4

1

XS5M-D427-5
Panel-mounting Plugs with Front Locks

1

4

3

2

PG9

M12

(20)

500

22.8

18

20

White

Brown

Blue

Black

18

17

8

2.8

10±3

2.8

Panel Cutout Dimension

Panel thickness = 1 to 4 mm

15.3

+0.1

0

dia.

Pin number Color

1Brown

2White

3Blue

4Black

Item Specification

Specification UL1007

Nominal size AWG20

Configuration

Number of wires 21

Wire diameter 0.18

Standard outer diameter 1.8

Type Lock Cable length (m) Model Minimum order

With cable

Rear lock

0.5

XS5M-D426-5

10

Front lock XS5M-D427-5

XS5

16

Tools

Use the Crimp Tool to crimp a cable core to the XS5U or XS2U
Crimping Pin used with the XS@C or XS@G Crimping Connector.

• The XY2F-0002 Crimp Tool is DMC's AFM8 (M22520/2-01).

• Mount the XY2F-0003 Locator (sold separately) to the locator

guide of the Crimp Tool with a screw provided with the XY2F-0003
Locator.

Extraction Procedure

(1) Disconnecting Components

• Disconnect all components on the cap side from the cover.

(2) Extracting Pin Block

• Insert the claws of the Tool into the four holes of the cover.

• Make sure that the pin block is outside the Tool.

• Press the Tool so that the guides of the Tool are in close contact.

Then pull the pin block straight.

Precaution for Safe Use

• The pin block must not be extracted from the same Connector
more than 3 times, otherwise the proper degree of protection of the
pin block or Connector will not be maintained.

Crimp Tool

XY2F-0002

Locator

XY2F-0003

5

4

3

2

1

8

7

6

R

A

I

S

E

T

O

R

O

T

A

T

E

SEL.

NO.

P

U

S

H

P

O

S

I

T

I

O

N

E

R

A

N

D

R

O

T

A

T

E

9

0

°

T

O

I

N

S

T

A

L

L

R

O

T

A

T

E

9

0

°

T

O

I

N

S

T

A

L

L

Tool in open position

Tool in closed
position

XY2F-0001
Crimp Tool

XY2F-0003
Locator

Selector dial
(Set to 6.)

Locator guide

Model

XY2F-0002

XY2F-0003

Pin-block Extraction Tool

XY2F-0001

Use this tool to extract a Pin Block from the covers in order to make
wiring changes or corrections after the cover has been mounted to the
pin block for Connector Assemblies (XS@C/XS@G, soldering/
crimping).

Model

XY2F-0001

Pin block Cover Rubber

bushing

Cable
clamp

Cap

Holes

Claws

Tool

Pin block

Guide

Cover

Cover

Pin block

Guide

Extracting
direction

XS5

17

Assembly Procedure for XS5C/XS5G Connector Assemblies

(1) Connector and Cable External Diameters

• Connectors for 6-, 4-, and 3-mm-diameter Cables (i.e., Cables that
are 5 to 6, 4 to 5, and 3 to 4 mm in diameter respectively) are
available. When assembling a Connector used with a cable, make
sure that the external diameter of the Connector is suited to that of
the cable.

• Connectors for 6-mm-diameter Cables use white cable clamps.
Connectors for 4- and 3-mm-diameter Cables use black cable
clamps.
A watertight bushing for 6-mm-diameter Cable has no stripe, that
for 4-mm-diameter Cable has a single stripe, and that for 3-mm­diameter Cable has two stripes.

Note: When connecting a commercially available cable to a

connector assembly, use a cable with an outside diameter of 3
to 6 mm and core sizes of 0.18 to 0.75 mm

2

for crimping

connectors and 0.5 mm

2

maximum for soldering connectors.

(2) Component Insertion

• As shown in the above illustration, connect the above components
to the Cable with its end processed.

(3) Wiring (Processing Cable Ends)

• Strip 10 mm of the Cable sheath and 4 mm of each core.

• Before soldering cores and solder cup pins together, solder-coat

each of them.

• The following conditions are recommended for soldering each
solder cup pin.

Soldering iron: 30 to 60 W
Soldering temperature: 280°C to 340°C
Soldering period: 3 s max.

• The length marked *A should be 6.5 mm max., otherwise the
proper degree of protection of the connector will not be maintained.

• Strip 14 mm of the Cable sheath and 4 mm of each core.

• Make sure that each core is not damaged and its end strands are

not spread out.

• Mount the XY2F-0003 Locator to XY2F-0002 Crimping Tool, both
of which are sold separately, and set the selector dial of the
Crimping Tool to 6 for the XS5U-@@21 and to 7 for the XS5U-
@@22.

• After mounting the crimping pins to the Locator, fully insert the
cores to the crimping pins.

• Squeeze the handle of the Crimp Tool to press-fit the cores to the
crimping pins.
(Squeeze the handle firmly until the handle automatically returns to
the release position.)

• After press-fitting the cores to the pins, insert the pins into the pin
clamp as shown in the illustration. Then make sure that the lead
colors correspond to the pin clamp numbers that are identical to
the connector pin numbers.

Crimping/Soldering Connectors

Screw-on Connectors

Cover

Watertight

bushing

Cable
clamp

Cap

Cover

Ring (Angled models only)

*

Watertight
bushing

Cable clamp

Cap

Straight Connectors

Angled Connectors

* A ring is not required for Screw-on Connectors.

Cover

Cover

Watertight bushing

Watertight

bushing

Cable clamp

Cable clamp

Cap

Cap

Ring *1

(

*2

)

Confirm that you have all of the required parts.

Insulation caps and insulation tubes are included with
5-pole Connectors (XS2C-D5S@ and XS2G-D5S@).

*1. Rings are not required with 7-mm and 8-mm cables.
*2. Insert the waterproof bushing for 7-mm and 8-mm

cables in the direction shown in the diagram.

Soldering Connectors

Crimping Connectors

4

6

6±0.5

*A

4

10

0

−4

Crimping

Pin clamp

Press

1 to 1.5

Wiring

XS5

18

• Tentatively insert the pins to the pin block holes so that the key on
the pin block will coincide with the key groove on the pin clamp.
Then insert the cable along with the pin clamp.

• Loosen the screws on pins 1 to 4 and insert the cores according to
the pin numbers.

• Use the dedicated Screwdriver (XW4Z-00B)* and tighten the
screws securely so that the cores do not pull out (tightening torque:

0.15 to 0.2 N·m).

• Five-pole Connectors

• Strip the cable sheath for a total of 15 mm and strip the core

covering for 8 mm for the core to connect to pin 5.

• Connect the core to pin 5 (in the center) first.

• Insert the core from the side of the hold with the tab and tighten the

screw securely (tightening torque: 0.15 to 0.2 N·m), and then cut
off the excess wire with wire cutters.

• Bend the cable as shown below, attached the enclosed insulation
cap, and then strip the other cores.

• Connect the cores to pins 1 to 4.

Connecting Shielded Cables to Five-pole Connectors

• Place the insulation tub on the drain line of the shield and connect
it to the terminal.

• Tighten the screw and then check visually to see if there is
insulation between the cores.

• Connect the cores to pins 1 to 4.

* When tightening the screws, use the dedicated XW4Z-00B

Screwdriver that matches with the screw-slot dimensions.

(4) Inserting Pin Block

• Mount the cover to the pin block so that the triangle mark on the pin
block will coincide with the triangle mark on the cover.

• If the cover is used for an Angled model, the relationship between
the position of the polarity key on the engaged side and cable
connection direction will be determined by the direction in which
the positioning key is inserted into the cover, which can be rotated
by 90°.

• Fully insert the positioning key until the positioning key is hidden by
the casing.

Screw-on Connectors

Pin Block Pin Clamp

Key groove Key groove

Key

XS5C use XS5G use

6

±0.5

Insertion

8

12

12

±0.5

Cable End Processing

• Four-pole Connectors

87

8

12

Conductors for
pins 1 to 4

Conductors for
pin 5

Screw

Dedicated

screwdriver

Dedicated

screwdriver

Screw

Tab

Insulation cap

Insulation tube

Drain line

XW4Z-00B
Screwdriver

Lock spring

O-ring

Triangle mark

Positioning key
(triangle mark)

Polarity key

Pin Block
(Soldering Model)

Cover
(Straight Model)

(Crimping Model)

(Angled Model)

XS5

19

• Align the triangular marks on the pin block and cover and insert the
pin block into the cover.

• Press them together firmly (0.39 to 0.49 N·m) until the pin block
does not come out of the cover.

(5) Mounting Cap

• After mounting the cover to the pin block and the cover snaps into
place, tighten the cap securely by hand within a torque of 0.39 and

0.49 N·m.

Note: If the cap is not tighten securely enough, the degree of

protection (IP67) may not be maintained or vibration may
cause the cap to become loose. Do not tighten the cap with
pliers or similar tools; they may damage the cap.

• After fully tightening the cap, length A should be approximately one
of the following according to the cable external diameter and the
Connector model.

(6) After Assembly

• Confirm the insulation between cores after completing assembly.

Recommended Cables

When connecting a commercially available cable to a connector
assembly, use a cable with an outside diameter of 3 to 6 mm and core
sizes of 0.18 to 0.75 mm

2

for crimping connectors and 0.5 mm2

maximum for soldering connectors.

Connector Arrangement

For safety, when constructing a connection system between a Sensor
and panel with a connector, make sure that the connector plug is on
the Sensor side and the connector socket is on the panel side (i.e.,
the female pins are located on the power-supply side).

Connecting the XS5

1. Connecting the XS5 Plug and Socket

• Align the projection on the plug cover with the polarity key on the
socket, then insert the plug all the way in.

• Hold the knurled socket grip, then insert the projection on the plug
into the groove of the socket.

• Turn the knurled grips of the socket clockwise approximately 45
degrees in respect to the plug. A click will indicate that the
Connectors are locked. The locking condition can also be
confirmed by the alignment marks on the plug and socket.

2. Connecting the XS5 and XS2

• Align the projection on the plug cover with the polarity key on the
socket, then insert the plug all the way in.

• In the same way as when connecting two XS2 Connectors, screw
the knurled grip in the clockwise direction.

• Use your fingers to tighten the Connectors sufficiently.

Connector

Cable external diameter (mm)

6 mm 5 mm 4 mm 3 mm

For 6-mm-dia. cable 1 0 --- ---

For 4-mm-dia. cable --- 2 1 ---

For 3-mm-dia. cable --- --- 2 1

Triangle mark

Pin block

Cover lock

Pin Block
(Screw-mounting Connectors)

Cover

Cap

A

Sensor Side

Connecting Cable

Panel Side
(Power-supply Side)

(Plug)

(Socket)

(Plug) (Socket)

Protrusion on
cover aligns with
polarity key.

Polarity key

Alignment marks

XS5

20

Safety Precautions

Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.

Connector Connection and Disconnection

• When connecting or disconnecting Connectors, be sure to hold the
Connectors by hand.

• Do not hold the cable when disconnecting Connectors.

• When mating Connectors, be sure to insert the plug all the way to

the back of the socket before attempting to lock the Connectors.

• Do not use tools of any sort to mate the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.

• When mating the Connectors to XS2 or other M12 Connectors,
tighten the lock by hand to a torque of 0.39 to 0.49 N⋅m.

Wiring

• Always confirm wiring diagrams before wiring sensors, limit
switches, or other devices.

• Lay the cables so that external force is not applied to the
Connectors. Otherwise, the degree of protection (IP67) may not be
achieved.

Degree of Protection

• The degree of protection of Connectors (IP67) is not for a fully
watertight structure. Do not the Connectors underwater.

• Do not step on or place any objects on the Connectors. Doing so
may damage the Connectors.

General Precautions

• Do not pull excessively on the Connectors or cables. Do not install
the Connectors or cables in any way that would place a load
directly on the mating section or cable connections. Doing so can
damage the Connectors or break the wires inside the cables.

• Install the Connectors and cables where they will not be stepped
on to prevent the wires inside the cables from being broken and to
prevent the Connectors from being damaged. If the Connectors or
cables must be installed where they might be stepped on, protect
them with covers.

• Refer to the specifications for your cables before bending the
cables and do not bend them past their minimum bending radius.

• If sensors or switches are not attached during installation, protect
the mating surface of the Connector with a XS2Z-22 Waterproof
Cover of XS2Z-14/15 Dust Cover.

Precautions for Correct Use

21

MEMO

New Product

22

Connector Terminal Boxes

XW3D

Simple Wiring of Sensor Actuators

• Greatly reduce wiring in combination with the Smartclick
XS5.

• Insert the connector and turn 1/8 of a turn to lock the
connectors.

• Higher rated current to enable output applications.

• Use previous M12 screw connectors.

Specifications Materials and Finish

Connection Combinations

Rated current 4 A/port, 12 A/Box (power line)

Rated voltage 10 to 30 VDC

Contact resistance
(connector)

40 mΩ max.
(20 mV max., 100 mA max.)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength
(connector)

500 VAC for 1 min
(leakage current: 1 mA max.)

Degree of protection IP67 (IEC60529)

Insertion tolerance 50 times min.

Lock strength Pulling: 100 N/15 s, Twisting: 1 N·m/15 s

Cable holding strength 100 N/15 s

Lock operating force 0.1 N·m to 0.25 N·m

Ambient temperature
range

Operating: −25 to 70°C

Item Materials/finish

Contacts Brass/nickel base, 0.4-µm gold-plating

Fixtures Nickel-plated zinc alloy

Case PBT resin (UL94V-O), light gray

Bushing Rubber

O-ring Rubber

PCB Glass epoxy board

Sealing resin Urethane resin (UL94V-0)

Cable

UL AWM2464
Signal lines: AWG22
Power and ground lines: AWG18

is a registered trademark of the OMRON Corporation.

: Connected by .

❍: Connected by screwing.

OMRON model no.

Twist-and-Click

Plug Connectors

M12 Plug Connec-

tors

XS5H, XS5G,

XS5W (plug end),

XS5R (plug end)

XS2H, XS2G,

XS2W (plug end),

XS2R (plug end)

Connector Terminal Box XW3D

❍

XW3D

23

Ordering Information

Note: 1. "1-4" and "3-4" are the connector pin numbers that are wired.

2. All cables are 5 m long.

Dimensions (Unit: mm)

Sensor type and wiring 3-wire DC NPN/2-wire DC 3-4 2-wire DC 1-4/without polarity 3-4 3-wire DC PNP/2-wire DC 1-4

Actuator wiring Actuator wiring 1-4 --- Actuator wiring 3-4

No. of ports No. of I/O Model

4 4 XW3D-P455-G11 XW3D-P452-G11 XW3D-P453-G11

8 8 XW3D-P855-G11 XW3D-P852-G11 XW3D-P853-G11

4 8 XW3D-P458-G11 --- XW3D-P457-G11

Waterproof Cover (Sold Separately)

XS2Z-22

Note: 1. The XW3D/XW3B/XW3A comes with a dust cover. Use

the optional XS2Z-22 Waterproof Cover when an IP67
degree of protection is required.

2. The XS2Z-22 connection is threaded.

Model No. per box Material

XS2Z-22 50 Brass with Ni plating

9

27

82

120

5000

10

100

73

4.5

27

Power indicator (green LED)

Operation indicator (red LED)

13.5

6.5

9

9

33

54

6.9 dia.

9

20

Indication of internal wiring

30.5

4.5 dia.

4.5 dia.

XW3D-P45@-G11
(Model with Four Ports)

27 27

27

127

120

5000

10

100

73

4.5

4.5 dia.

4.5 dia.

9 dia.

27

Power indicator (green LED)

Operation indicator (red LED)

13.5

6.5

9

9

33

54

8.2 dia.

9

20

Indication of internal wiring

30.5

XW3D-P85@-G11
(Model with Eight Ports)

XW3D

24

Wiring Diagrams

Models with One I/O and One Port

Note: 1. The above wiring diagrams are for eight-port use.

2. Figures in parentheses indicate lead colors.

3. The expression "white/red" means white and red stripes.

4. Here, "1-4" and "3-4" are pin numbers.

5. Contact numbers 5 through 8 in the above diagrams do not exist on Terminal Boxes with four ports. The lead colors for signals 1 through

4, power supply, and ground are the same.

9

27

82

73

4.5

4.5 dia.

27

Power indicator (green LED)

Operation indicator (red LED)

13.5

6.5

9

9

33

54

9

20

Indication of internal wiring

30.5

120

5000

10

100

8.2 dia.

4.5 dia.

XW3D-P457-G11
(Model with Four Ports and Eight I/O)

Lead color

Lead color

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

Ground

(Green/Yellow)

Connector
pin number

Negative

power supply

(Blue)

Signal 1
(White)

Signal 2
(Green)

Signal 2
(Green)

Signal 2
(Green)

Signal 3
(Yellow)

Signal 4
(Gray)

Signal 5
(Pink)

Signal 6
(Red)

Signal 7
(Black)

Signal 8
(Purple)

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

Ground

(Green/Yellow)

Negative

power supply

(Blue)

Negative

power supply

(Blue)

Positive

power supply

(Brown)

Positive

power supply

(Brown)

Positive

power supply

(Brown)

Signal 1
(White)

Signal 3
(Yellow)

Signal 4
(Gray)

Signal 5
(Pink)

Signal 6
(Red)

Signal 7
(Black)

Signal 8
(Purple)

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

Ground

(Green/Yellow)

Signal 1
(White)

Signal 3
(Yellow)

Signal 4
(Gray)

Signal 5
(Pink)

Signal 6
(Red)

Signal 7
(Black)

Signal 8
(Purple)

Power indicator
(green LED)

Operation indicator (red LED)

Power indicator
(green LED)

Operation indicator (red LED)

Power indicator
(green LED)

Operation indicator (red LED)

Lead color

Connector
pin number

Connector
pin number

1

3

2

4

5

7

6

8

1

3

2

4

5

7

6

8

1

3

2

4

5

7

6

8

XW3D-P@55-@11
for 3-wire NPN,
2-wire DC (without polarity 3-4),
and Actuator (1-4)

XW3D-P@52-@11
for 2-wire DC
(polarity 1-4, without polarity 3-4)

Note: Cannot be used with NPN-type Photoelectric

and Proximity Sensors. Cannot be used with
Proximity Sensors with polarity 3-4.

XW3D-P@53-@11
for 3-wire PNP,
2-wire DC (with polarity 1-4),
and Actuator (3-4)

3-WIRE
NPN

3-WIRE
PNP

2-WIRE

XW3D

25

Models with Two I/O and One Port

Note: Colors given in the connection diagram are lead colors.

Mounting Dimensions (Unit: mm)

Note: The mounting dimensions are the same regardless of the number of ports.

Safety Precautions

Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.

Connector Connection and Disconnection

• Mate the connectors according to the procedure given on page 19.

• When mating Connectors, be sure to insert the plug all the way to

the back of the socket before attempting to lock the Connectors.

• Do not use tools of any sort to mate the Connectors. Always use
your hands. Pliers or other tools may damage the Connectors.

• When mating the Connectors to XS2 or other M12 Connectors,
tighten the lock by hand to a torque of 0.39 to 0.49 N·m.

• Confirm in the catalog that sensors and actuators are applicable
before using them.

• Always turn OFF the power supply before connecting or
disconnecting connectors.

• Do not touch the mating surface of the connectors with wet hands.

• Wipe away any water around the connectors.

• Do not allow metal scraps or dust to enter the mating section.

Cable Lead Polarity

• Connect the cables leads using the correct polarity (Blue: Negative
power supply, Brown: Positive power supply).

• If the polarity is not correct, the load may not operate or the
operation indicator may not light.

• Always connect a load to the signal lines to operate a sensor or
actuator.

Applicable Connectors

• Always mount a Waterproof Cover (XS2Z-22) or Dust Cover
(XS2Z-15) to any unused connector on the Connector Terminal
Box.

Power Supply and Operation Indicators

• The power supply indicator will be lit green while power is being
supplied. The operation indicator will be lit red while the sensor or
actuator is operating.

• The XW3D is for a DC sensor or actuator. Do not use it for an AC
sensor or actuator.

• Connector Terminal Boxes are available with either 2-wire or 3­wire internal connections, as indicated on the case.

Precautions for Correct Use

Connector
pin number

1

1

2

2

3

3

1

5

42

3

1

5

42

3

1

5

42

3

4

4

1

5

42

3

1

1

2

2

3

3

4

4

1

5

42

3

1

5

42

3

1

5

42

3

1

5

42

3

Ground

(Green/Yellow)

Negative

power supply

(Blue)

Signal 1B
(Pink)

Signal 1A
(White)

Signal 2B
(Red)

Signal 2A
(Green)

Signal 3A
(Yellow)

Signal 3B
(Black)

Signal 4B
(Purple)

Signal 4A
(Gray)

Positive

power supply

(Brown)

Lead color

Connector
pin number

Ground

(Green/Yellow)

Negative

power supply

(Blue)

Signal 1B
(Pink)

Signal 1A
(White)

Signal 2B
(Red)

Signal 2A
(Green)

Signal 3A
(Yellow)

Signal 3B
(Black)

Signal 4B
(Purple)

Signal 4A
(Gray)

Positive

power supply

(Brown)

Lead color

XW3D-P458-G11
for 3-wire NPN and
Actuator (1-4 or 1-2)

XW3D-P457-G11
for 3-wire PNP and
Actuator (3-4 or 3-2)

3-WIRE
NPN (2)

3-WIRE
PNP (2)

73

±0.1

33

±0.1

Three, M4 or 4.5 dia.

3-WIRE
NPN

3-WIRE
PNP

2-WIRE

3-WIRE
NPN (2)

3-WIRE
PNP (2)

XS5/XW3D

26

XS5-compatible Products

Photoelectric Sensors

E3ZM-C Oil-resistant, Robust, Compact Photoelectric Sensor (Stainless Housing and Built-in Amplifier)

* Separate the Sensor and Reflector by at least the distance given in parentheses.

E3Z Compact Photoelectric Sensor with Built-in Amplifier

*1. The Reflector is sold separately. Select the Reflector model most suited to the application.
*2. The sensing distance specified is possible when the E39-R1S is used. Values in parentheses indicate the minimum required distance between

the Sensor and Reflector.

Sensing method Appearance Sensing distance

Model

NPN output PNP output

Through-beam

E3ZM-CT61-M1TJ E3ZM-CT81-M1TJ

E3ZM-CT62B-M1TJ E3ZM-CT82B-M1TJ

Retro-reflective E3ZM-CR61-M1TJ E3ZM-CR81-M1TJ

Diffuse reflective E3ZM-CD62-M1TJ E3ZM-CD82-M1TJ

BGS reflective

E3ZM-CL61H-M1TJ E3ZM-CL81H-M1TJ

E3ZM-CL62H-M1TJ E3ZM-CL82H-M1TJ

E3ZM-CL64H-M1TJ E3ZM-CL84H-M1TJ

Sensing method Appearance Sensing distance

Model

NPN output PNP output

Through-beam E3Z-T61-M1TJ E3Z-T81-M1TJ

Retro-reflective
with MSR func-

tion

E3Z-R61-M1TJ E3Z-R81-M1TJ

Diffuse reflective

--- E3Z-D81-M1TJ

E3Z-D62-M1TJ E3Z-D82-M1TJ

Narrow-beam

reflective

E3Z-L61-M1TJ E3Z-L81-M1TJ

Red light Infrared lightOrange light

15 m

20 m

4 m [

100 mm]*

(Using E39-R1S)

1 m

10 to 100 mm

10 to 150 mm

10 to 200 mm

15 m

*1

4 m

[100 mm]

*2

5 to 100 mm (wide view)

1 m

90±30 mm

XS5/XW3D

27

E3T "Mini" Photoelectric Sensor with Built-in Amplifier

* Separate the Sensor and Reflector by at least the distance given in parentheses.

Sensing

method

Appearance

Sensing
distance

Operating

mode

Model

NPN output PNP output

Through-

beam

Side-view

Light-ON E3T-ST11-M1TJ E3T-ST13-M1TJ

Dark-ON E3T-ST12-M1TJ E3T-ST14-M1TJ

Light-ON E3T-ST21-M1TJ E3T-ST23-M1TJ

Dark-ON E3T-ST22-M1TJ E3T-ST24-M1TJ

Flat

Light-ON E3T-FT11-M1TJ E3T-FT13-M1TJ

Dark-ON E3T-FT12-M1TJ E3T-FT14-M1TJ

Light-ON E3T-FT21-M1TJ E3T-FT23-M1TJ

Dark-ON E3T-FT22-M1TJ E3T-FT24-M1TJ

Retro-

reflective

Side-view

Light-ON E3T-SR21-M1TJ E3T-SR23-M1TJ

Dark-ON E3T-SR22-M1TJ E3T-SR24-M1TJ

Side-view

Light-ON E3T-SR31-M1TJ E3T-SR33-M1TJ

Dark-ON E3T-SR32-M1TJ E3T-SR34-M1TJ

Diffuse

reflective

Flat

Light-ON E3T-FD11-M1TJ E3T-FD13-M1TJ

Dark-ON E3T-FD12-M1TJ E3T-FD14-M1TJ

Convergent

reflective

Side-view

Light-ON E3T-SL11-M1TJ E3T-SL13-M1TJ

Dark-ON E3T-SL12-M1TJ E3T-SL14-M1TJ

Light-ON E3T-SL21-M1TJ E3T-SL23-M1TJ

Dark-ON E3T-SL22-M1TJ E3T-SL24-M1TJ

BGS

reflective

Flat

Light-ON E3T-FL11-M1TJ E3T-FL13-M1TJ

Dark-ON E3T-FL12-M1TJ E3T-FL14-M1TJ

Light-ON E3T-FL21-M1TJ E3T-FL23-M1TJ

Dark-ON E3T-FL22-M1TJ E3T-FL24-M1TJ

Infrared light

1 m

300 mm

500 mm

300 mm

200 mm

[10 mm] *

100 mm

[10 mm] *

5 to 30 mm

5 to 15 mm

5 to 30 mm

1 to 15 mm

1 to 30 mm

XS5/XW3D

28

Proximity Sensors

Proximity Sensors with Oil-resistant Cables (PUR Cables)

Note: Other models are also available that can be used with the Twist-and-Click Connectors. Ask your OMRON representative for details.

Standard Proximity Sensor (PVC Cable)

Note: Other models are also available that can be used with the Twist-and-Click Connectors. Ask your OMRON representative for details.

Spatter-Immune Proximity Sensor (Fire-retardant PVC Cable)

Note: Other models are also available that can be used with the Twist-and-Click Connectors. Ask your OMRON representative for details.

Proximity Sensor with All-stainless Housing (Fire-retardant PVC Cable)

Note: Other models are also available that can be used with the Twist-and-Click Connectors. Ask your OMRON representative for details.

Appearance Sensing distance Output configuration Operating mode Model

M8

2-Wire DC

Polarity

1,4 Pin Specifications

NO

E2E-X2D1-M1TGJ-U

M12 E2E-X3D1-M1TGJ-U

M18 E2E-X7D1-M1TGJ-U

M30 E2E-X10D1-M1TGJ-U

M8

2-Wire DC

Polarity

1,2 Pin Specifications

NC

E2E-X2D2-M1TGJ-U

M12 E2E-X3D2-M1TGJ-U

M18 E2E-X7D2-M1TGJ-U

M30 E2E-X10D2-M1TGJ-U

Appearance Sensing distance Output configuration Operating mode Model

M8

2-Wire DC

Polarity

1,4 Pin Specifications

NO

E2E-X2D1-M1TGJ

M12 E2E-X3D1-M1TGJ

M18 E2E-X7D1-M1TGJ

M30 E2E-X10D1-M1TGJ

M12

2-Wire DC

Polarity

1,4 Pin Specifications

NO

E2E-X8MD1-M1TGJ

M18 E2E-X14MD1-M1TGJ

M30 E2E-X20MD1-M1TGJ

Appearance Sensing distance Output configuration Operating mode Model

M12

2-Wire DC

Polarity

1,4 Pin Specifications

NO

E2EQ-X3D1-M1TGJ

M18 E2EQ-X7D1-M1TGJ

M30 E2EQ-X10D1-M1TGJ

M12

2-Wire DC

Polarity

3,4 Pin Specifications

NO

E2EQ-X4X1-M1TJ

M18 E2EQ-X8X1-M1TJ

M30 E2EQ-X15X1-M1TJ

Appearance Sensing distance Output configuration Operating mode Model

M8

2-Wire DC

Polarity

1,4 Pin Specifications

NO

E2FM-X1R5D1-M1TGJ

M12 E2FM-X2D1-M1TGJ

M18 E2FM-X5D1-M1TGJ

M30 E2FM-X10D1-M1TGJ

Shielded

2 mm

3 mm

7 mm

10 mm

2 mm

3 mm

7 mm

10 mm

Shielded

2 mm

3 mm

7 mm

10 mm

Non-shielded

8 mm

14 mm

20 mm

Shielded

3 mm

7 mm

10 mm

4 mm

8 mm

15 mm

Shielded

1.5 mm

2 mm

5 mm

10 mm

XS5/XW3D

29

Chip-Immune Inductive Proximity Sensor (PVC Cable)

Note: Other models are also available that can be used with the Twist-and-Click Connectors. Ask your OMRON representative for details.

Pulse Response Proximity Sensor

Note: Other models are also available that can be used with the Twist-and-Click Connectors. Ask your OMRON representative for details.

Cable Amplifier Proximity Sensor

Note: Other models are also available that can be used with the Twist-and-Click Connectors. Ask your OMRON representative for details.

Appearance Sensing distance Output configuration Operating mode Model

M12

2-Wire DC

Polarity

1,4 Pin Specifications

NO

E2EZ-X2D1-M1TGJ

M18 E2EZ-X4D1-M1TGJ

M30 E2EZ-X8D1-M1TGJ

M12

2-Wire DC

Polarity

3,4 Pin Specifications

NO

E2EZ-X2D1-M1TJ

M18 E2EZ-X4D1-M1TJ

M30 E2EZ-X8D1-M1TJ

Appearance Sensing distance Output configuration Operating mode Model

M12

3-Wire DC

PNP

1, 4, 3 Pin Specifications

NO

E2V-X4B1-M1TJ

M18 E2V-X8B1-M1TJ

M30 E2V-X15B1-M1TJ

M12

3-Wire DC

NPN

1, 4, 3 Pin Specifications

NO

E2V-X4C1-M1TJ

M18 E2V-X8C1-M1TJ

M30 E2V-X15C1-M1TJ

Appearance Sensing distance Output configuration Operating mode Model

3 dia.

2-Wire DC

Polarity

1,4 Pin Specifications

NO

E2EC-CR8D1-M1TGJ

5.4 dia. E2EC-C1R5D1-M1TGJ

8 dia. E2EC-C3D1-M1TGJ

8 dia.

2-Wire DC
No polarity

3, 4 Pin Specifications

NO E2EC-QC2D1-M1TGJ-T

Shielded

2 mm

4 mm

8 mm

2 mm

4 mm

8 mm

Shielded

4 mm

8 mm

15 mm

4 mm

8 mm

15 mm

Shielded

0.8 mm

1.5 mm

3 mm

2 mm

MEMO

30

31

READ AND UNDERSTAND THIS DOCUMENT

Please read and understand this document before using the products. Please consult your OMRON representative if you have any questions or
comments.

WARRANTY

OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specified) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,
NEGLIGENCE, OR STRICT LIABILITY.

In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asser ted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

SUITABILITY FOR USE

THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY ARE NOT DESIGNED OR RATED FOR ENSURING
SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH
PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the
customer’s application or use of the product.

At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end
product, machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:

• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.

• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.

• Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PERFORMANCE DATA

Performance data given in this document is provided as a guide for the user in determining suitability and does not constitute a warranty. It may
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject
to the OMRON Warranty and Limitations of Liability.

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.

COPYRIGHT AND COPY PERMISSION

This document shall not be copied for sales or promotions without permission.

This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or
reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in
its entirety.

OMRON Corporation

Electronic Components Company

Connector Division

Sakado 3-2-1, Takatsu-ku, Kawasaki-city,
Kanagawa, 213-0012 Japan
Tel: [phone]/Fax: [phone]

In the interest of product improvement, specifications are subject to change without notice.

Cat. No. G016-E1-02

Printed in Japan

1008

Regional Headquarters

OMRON EUROPE B.V.

Sensor Business Unit,
Carl-Benz-Str. 4, D-71154 Nufringen,
Germany
Tel: [phone]/Fax: [phone]

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg, IL 60173
U.S.A.
Tel: [phone]/Fax: [phone]

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,
#11-01, UE Square,
239920 Singapore
Tel: [phone]/Fax: [phone]

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,
200 Yin Cheng Road (M),
Shanghai, 200120 China
Tel: [phone]/Fax: [phone]