Omron Varispeed J7 CIMR-J7AZ System Configuration Manual

Download

Page 1

CIMR-J7AZ

Varispeed J7

Small, simple and smart

• V/f controlled inverter

• Compact size

• Good torque performance: 100% torque at 1.5 Hz, 150% at 3 Hz

• 150% overload / 60sec

• Overload detection function.

• Motor thermal function

• Freely configurable V/f curve

• 4 programmable digital input

• 1 programmable digital output

• 1 programmable analog output

• Optional RS-232C/485 communication - Modbus

• PC Configuration tool: CX-drive

• CE, UL, and cUL marking

Ratings

• 200 V class single-phase 0.1 to 1.5 kW

• 200 V class three-phase 0.1 to 4.0 kW

• 400 V class three-phase 0.2 to 4.0 kW

System configuration

SI-485/J7

Line filter

SI-232/J7 SI-232/J7C

CX-Drive

JVOP-144 Remote digital oper. with potentiometer

Varispeed J7

JVOP-146 Remote digital oper. with potentiometer

3G3IV-PCN329-E Inverter to PC cable

3G3IV-PEZZ8122_ DIN attachment

3G3IV-PCN126/326 Digital operator extension cable

351Varispeed J7

Page 2

Specifications

Type designation

CIMR—J7AZ20P1

Inverter

J7 series

A: With digital operator (with potentiometer)

Z: European standard specifications

Voltage class 200 V single/three-phase 400 V three-phase

Model CIMR-J7AZ#

Max. applicable

motor output kW (HP)

Inverter capacity kVA

Rated output current A

Output

Power

1. Single-phase series inverter output is three-phase (for three-phase motors)

2. Based on a standard 4-pole motor for max. applicable motor output. Select the inverter model whose rated current is larger than motor rated current.

Max. output voltage V

characteristics

Max. output frequency

Rated input voltage

supply

Allowable frequency

Three-phase 20P1 20P2 20P4 20P7 21P5 22P2 24P0 40P2 40P4 40P7 41P5 42P2 43P0 44P0

Single-phase

and frequency

Allowable voltage

function

B0P1B0P2B0P4B0P7B1P5–––––––––

0.12 0.25 0.55 1.1 1.5 2.2 4.0 0.37 0.55 1.1 1.5 2.2 3.0 4.0

0.3 0.6 1.1 1.9 3.0 4.2 6.7 0.9 1.4 2.6 3.7 4.2 5.5 7.0

0.8 1.6 3 5 8 11 17.5 1.2 1.8 3.4 4.8 5.5 7.2 9.2

3-phase, 200 to 230 V (proportional to input voltage)

Single-phase, 200 to 240 V (proportional to input voltage)

3-phase, 200 to 230 V, 50/60 Hz

Single-phase, 200 to 240 V, 50/60 Hz

Max. applicable motor output 0P1: 0.1 kW

4P0: 4.0 kW

"P" indicates a decimal

[ ]

point

Voltage B: Single-phase 200 VAC 2: Three-phase 200 VAC 4: Three-phase 400 VAC

3-phase, 380 to 460 V (proportional to input voltage)

400 Hz (programmable)

3-phase, 380 to 460 V, 50/60 Hz

–15 to +10%

±5%

352 Frequency inverters

Page 3

Commom specifications

Model

CIMR-J7AZ# Control method Output frequency range Frequency tolerance

Resolution of frequency set value

Resolution of output frequency Overload capability Frequency set value Accel/decel time

Control functions

Braking torque

V/f characteristics Digital inputs Four of the following input signals are selectable: forward/reverse run (3-wire sequence), fault reset, external fault (NO/NC

Digital outputs Following output signals are selectable (NO/NC contact output): Fault, running, zero speed, speed agreed,

Standard functions Full-range automatic torque boost, slip compensation, 9-step speed operation (max.), restart after momentary power loss,

Functionality

Display

Motor overload protection Instantaneous overcurrent Overload Overvoltage Undervoltage

Momentary power loss

Cooling fin overheat

Protection

Stall prevention level

Cooling fan fault Ground fault Power charge indication

Degree of protection Cooling

Ambient temperature Ambient humidity Storage temperature Installation Installation height

Ambient conditions

Vibration

1. Shows deceleration torque for uncoupled motor decelerating from 60 Hz with the shortest possible deceleration time.

contact input), multi-step speed operation, jog command, accel/decel time select, external baseblock (NO/NC contact input), speed search command, UP/DOWN command, accel/decel hold command, LOCAL/REMOTE selection, communication/ control circuit terminal selection, emergency stop fault, emergency stop alarm, self test

frequency detection (output frequency ≤ or ≥ set value), during overtorque detection, minor error, during baseblock, operation mode, inverter run ready, during fault retry, during undervoltage detection, reverse running, during speed search, data output through communication

DC injection braking current at stop/start (50% of inverter rated current, 0.5 sec, or less), frequency reference bias/gain, fault retry, speed search, frequency upper/lower limit setting, overtorque detection, frequency jump, accel/decel time switch, accel/ decel prohibited, S-curve accel/decel, frequency reference with built-in volume, constants copy (option) MEMOBUS communications (option)

0 to 10 VDC (20 kΩ), 4 to 20 mA (250 Ω), 0 to 20 mA (250 Ω), frequency setting volume (selectable)

ON until the DC bus voltage becomes 50 V or less, RUN lamp stays ON or digital operator LED stays ON.

Self cooling for 200 V 0,1..0,75 kW (single-phase) 0,1..0,4 kW (Three-phase) and for 400 V 0,2..0,75l kW

Digital reference: 0.01 Hz (less than 100 Hz), 0.1 Hz (100 Hz or more)

Short-term average deceleration torque

Digital operator: available to monitor frequency reference, output frequency, output current

Protected by electronic circuit (operation level is approx. 250% of rated output current)

Cooling fan for 200 V (single-phase), 0.75 kW..4.0 kW (3-phase) and for 400 V 1,5..4.0 kW

0.1 to 999 sex. (accel/decel time are independently programmed)

Status indicator LED: RUN and ALARM provided as standard LED’s

Motor coasts to a stop at approx. 250% of inverter rated current

Motor coasts to a stop after 1 minute at 150% of inverter rated output current

Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class)

Stops when DC bus voltage is approx. 200 V or less (double for 400 V class)

Following items are selectable: Nnot provided (stop if power loss is 15ms or longer),

continuous operation if power loss is approx. 0.5 s or shorter, continuous operation

Individual level stall prevention can be set during acceleration or constant running,

Digital reference: ±0.01% (–10 to +50 °C),

Analog reference: ±0.5% (25±10 °C)

Analog reference: 1/1000 of max. output frequency

150% rated output current for one minute

0.4/0.75 kW (0,5 HP, 1HP): 100% or more;

2.2 kW (3 HP) or more: 20% or more

Continuous regenerative torque: Approx 20%

(approx. 160 V or less for single-phase series)

provided/not provided setting available during deceleration.

Detected by electronic circuit (fan lock detection)

-20 ºC..+60 ºC (short-term temperature during trasnportation)

10 to 20 Hz, 9.8 m/s2 max; 20 to 50 Hz, 2m/s2 max

Specifications

Sine wave PWM (V/f control)

0.1 to 400 Hz

0.01 Hz

: 0.1, 0.2 kW (0.13 HP, 0,25 HP): 150% or more;

1.5 kW (2 HP): 50% or more;

Possible to program any V/f pattern

Electronic thermal overload relay

Protected by thermister

(Charge LED is provided for 400 V)

-10 ºC to 50 ºC (non-freezing)

90% RH or less (non-condensing)

Indoor (no corrosive gas, dust, etc.)

IP20

Max. 1000 m

Varispeed J7 353

Page 4

Digital operator

Data display

Digital operator

Function display LEDs

Selected function is lit (see the functions below). Its data is displayed on data display.

Display selection key

Switch functions among function display LEDs.

Enter key

Enter data when setting constants. After selecting constant no. at PRGM mode, data are displayed.

Increment key

Increase constant no. or data.

Decrement key

Decrease constant no. or data.

Stop/Reset key

Press to stop the motor. If fault occurs, reset the inverter.

Operation key

Press to run the motor. The RUN light is ON while running.

Alarm LED

Run LED

Frequency setting volume

Set operational frequency with volume.

354 Frequency inverters

FREF

Frequency reference

setting/monitoring

F/R

Operator RUN command

FWD/REV selection

FOUT

Output frequency

monitoring

IOUT

Output current

monitoring

LO/RE

LOCAL/REMOTE

selection

MNTR

Multi-function

monitoring

PRGM

Constant no./data

Page 5

Dimensions

IP 20 type 0.1 to 4 kW

2 – M 4

4 – M 4

Voltage class

200 V

three-phase

200 V

single-phase

400 V

three-phase

8.5

(0.34)

Figure 1 Figure 2

Max. applicable

motor output kW

0.12

0.25

0.55

1.1

1.5

2.2

4.0

0.1

0.2

0.4

0.75

1.5

0.37

0.55

1.1

1.5

2.2

3.0

4.0

Inverter model

CIMR-J7AZ#

20P1 20P2 20P4 20P7 21P5 22P2 24P0 B0P1 B0P2 B0P4 B0P7 B1P5 40P2 40P4 40P7 41P5 42P2 43P0 44P0

Figure

1 68 128 70 56 118 5 0.5 Self cooled

2 108 129 96 118 1.3

1 68 128 70 56 118 5 0.5 Self cooled

2 108 129 96 1.5 Fan cooled

2 108 128 81 96 118 5 1.0 Self cooled

W H D W1 H1 H2

140 161 128 2.1

Dimensions in mm

102 0.8 122 0.9 Fan cooled

154 1.5

112 0.9

154

99 1.1 129 1.5 154

8.5

(0.34)

Weight kg

7.7

Cooling method

Fan cooled

Varispeed J7 355

Page 6

Filters

Schaffner model

3x200 V 3G3JV-PFI2010-SE 194 82 50 160 181 62 5.3 M5 25 56 118 M4

3G3JV-PFI2020-SE 169 111 50 135 156 91 5.5 M5 25 96 118 M4

1x200 V 3G3JV-PFI1010-SE 169 71 45 135 156 51 5.3 M5 22 56 118 M4

3G3JV-PFI1020-SE 169 111 50 135 156 91 5.3 M5 25 96 118 M4

3x400 V 3G3JV-PFI3005-SE 169 111 50 135 156 91 5.3 M5 22 96 118 M4

3G3JV-PFI3010-SE 169 111 50 135 156 91 5.3 M5 22 96 118 M4 3G3JV-PFI3020-SE 174 144 50 135 61 120 5 M5 28 128 118 M4

A B C D E F G H I J K L

Output flexes

Dimensions

Drive mounts

Rasmi model

3x200 V 3G3JV-PFI2010-E 82 50 194 181 62 M5

3G3JV-PF2020-E 111 50 169 156 91 M5

3G3JV-PFI2030-E 144 50 174 161 120 M5

1x200 V 3G3JV-PFI1010-E 71 45 169 156 51 M5

3G3JV-PFI1020-E 111 50 169 156 91 M5

3x400 V 3G3JV-PFI3005-E 111 50 169 156 91 M5

3G3JV-PFI3010-E 111 50 169 156 91 M5 3G3JV-PFI3020-E 144 50 174 161 120 M5

356 Frequency inverters

W H L X Y Inverter fixing

Dimensions

Page 7

DIN rail mounting bracket

3G3IV-PEZZ08122A

3G3IV-PEZZ08122C

Four, M4 tap

(35.1)

DIN rail

3G3IV-PEZZ08122B

Four, M4 tap

(35.1)

DIN rail

3-phase 200 VAC

Single-phase 200 VAC

3-phase 400 VAC

Four, M4 tap

Inverter DIN rail mounting bracket

CIMR-J7AZ20P1/20P2/20P4/20P7 3G3IV-PEZZ08122A CIMR-J7AZ21P5/22P2 3G3IV-PEZZ08122B CIMR-J7AZ24P0 3G3IV-PEZZ08122C CIMR-J7AZB0P1/B0P2/B0P4 3G3IV-PEZZ08122A CIMR-J7AZB0P7/B1P5 3G3IV-PEZZ08122B CIMR-J7AZ40P2/40P4/40P7/41P5/42P2 3G3IV-PEZZ08122B CIMR-J7AZ43P0/44P0 3G3IV-PEZZ08122C

Varispeed J7 357

Page 8

Installation

Standard connections

Forward run/stop

Reverse run/stop

Multifunction input

Fault reset External fault

(no contact) Multi-step speed

reference 1

Frequency reference

MCCB

Pulse train input

2 kΩ

Frequency setter

indicates shielded wire.

DC reactor (option)

short

bar

+2 +1 R/L1

S/L2

T/L3

Varispeed J7AZ

Shield connection terminal

Frequency setting power supply (+12 V 20 mA)

Speed frequency reference

0 To 10 V (20 kΩ ) or 4 to 20mA (250 Ω )

or O to 20 mA (250

Digital operator frequency setting volume

min

max

)

U/T1

V/T2

W/T3

MA MB MC

Grounding

Multi-function

Running

Speed reference pulse train (33 kHz max.)

Frequency meter adjusting potentiometer

Output frequency

output 250 VAC 1 A or less 30 VDC 1 A or less

Analog monitor output

0 To 10 VDC (2 mA)

indicates twisted pair

shielded wire.

: shows the connection for the following two kinds of sequence input (S1 to S5) signals: no-voltage contact and NPN transistors (0 V common). For a PNP transistor (+24 V common), a 24 V external power supply is necessary.

358 Frequency inverters

Page 9

Main circuit

Terminal Name Function (signal level)

R/L1, S/L2, T/L3

U/T1, V/T2, W/T3

+2, +1

+1, –

AC power supply input

Inverter output

DC reactor connection

DC power supply input

Grounding

Main circuit power supply input (Use R/L1 and S/L2 for single-phase power supply inverter. Do not use T/L3 of the models less than 0.75kW for other usage, such as a junction terminal.)

For inverter output

Remove the short bar between +2 and +1 when connecting DC reactor (option)

For power supply input (+1: positive electrode; – : negative electrode)*

For grounding (grounding should conform to the local grounding code.)

Control circuit

Type No. Signal name Function Signal level

Multi-function input selection 1 Factory setting: runs when CLOSED, stops when OPEN. 24VDC, 8mA

Multi-function input selection 2 Factory setting: runs when CLOSED, stops when OPEN.

Multi-function input selection 3 Factory setting: "fault reset"

Multi-function input selection 4 Factory setting: "external fault (NO contact)"

Multi-function input selection 5 Factory setting: "multi-step speed reference 1"

Multi-function input selection common

Power supply terminal for frequency setting

Speed frequency reference 0 to +10 VDC (20 kΩ) or 4 to 20 mA (250 Ω), 0 to 20 mA (250 Ω) (resolution 1/1000)

Frequency reference common 0 V

NO contact output Factory setting: "running" Contact capacity

NC contact output

Contact output common

Analog monitor output Factory setting: "output frequency" 0 to +10 V output 0 to 10 V 2 mA or less

Analog monitor common 0 V

Common for control signal

+12V (allowable current: 20 mA max.)

photocoupler isolation

250 VAC, 1A or less 30 VDC, 1A or less

Resolution: 8bits

Digital input signals

input

Analog

signals

Digital

output

signals

output

Analog

signals

Varispeed J7 359

Page 10

30 mm min. (0.1 to 4.0 KW)

50 mm min. (5.5 and 7.5 KW)

100 mm min.

Air

Inverter

Inverter heat loss

Three-phase 200 V class

CIMR-J7AZ# 20P1 20P2 20P4 20P7 21P5 22P2 24P0

Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0 4.2 6.7

Rated current A 0.8 1.6 3.0 5.0 8.0 11.0 17.5

Heat

loss W

Single-phase 200 V class

CIMR-J7AZ# B0P1 B0P2 B0P4 B0P7 B1P5

Inverter capacity kVA 0.3 0.6 1.1 1.9 3.0

Rated current A 0.8 1.6 3.0 5.0 8.0

Heat

loss W

Three-phase 400 V class

CIMR-J7AZ# 40P2 40P4 40P7 41P5 42P2 43P0 44P0

Inverter capacity kVA 0.9 1.4 2.6 3.7 4.2 5.5 7.0

Rated current A 1.2 1.8 3.4 4.8 5.5 7.2 9.2

Heat

loss W

Inverter Inverter

100 mm min.

Fin 3.7 10.3 15.8 28.4 53.7 60.4 96.7

Inside unit 9.3 18.0 12.3 16.7 19.1 34.4 52.4

Total heat loss 13.0 18.0 28.1 45.1 72.8 94.8 149.1

Fin 3.7 7.7 15.8 28.4 53.7

Inside unit 10.4 12.3 16.1 23.0 29.1

Total heat loss 14.1 20.1 31.9 51.4 82.8

Fin 9.4 15.1 30.3 45.8 50.5 58.2 73.4

Inside unit 13.7 15.0 24.6 29.9 32.5 37.6 44.5

Total heat loss 23.7 30.1 54.9 75.7 83.0 95.8 117.9

Side

Air

360 Frequency inverters

Page 11

AC reactor

DC reactor

AC reactor

L1(R) L2(S) L3(T)

MCCB

X V W

L1(R)

L2(S)

L3(T)

T1(U) T2(V) T3(W)

Motor

CIMR-J7AZ

Be sure to connect AC reactor on inverter input side [L L

2 (S), L3 (T)].

200 V class 400 V class Max. applicable

motor output kW

0.1 2.0 2.0 ------

0.22.02.00.2

0.42.54.20.4

0.75 5 2.1 0.75 2.5 8.4

1.5 10 1.1 1.5 5 4.2

2.2 15 0.71 2.2 7.5 3.6

4.0 20 0.53 4.0 10 2.2

Current value AInductancemHMax. applicable

MCCB

motor output kW

DC reactor

⊕

Current value AInductance

Motor

1 (R),

1.3 18.0

CIMR-J7AZ

200 V class 400 V class Max. applicable

motor output kW

0.12 5.4 8 --------

0.25 0.37 3.2 28

0.55 0.55

1.1 1.1

1.5 18 3 1.5 5.7 11

2.2 2.2

4.0 4.0 12 6.3

Current value AInductance

Max. applicable motor output kW

Current value AInductance

Varispeed J7 361

Page 12

Ordering information

SI-485/J7

Line filter

Varispeed J7

SI-232/J7 SI-232/J7C

CX-Drive

JVOP-144 Remote digital oper. with potentiometer

Varispeed J7

JVOP-146 Remote digital oper. with potentiometer

3G3IV-PCN329-E Inverter to PC cable

3G3IV-PEZZ8122_ DIN attachment

3G3IV-PCN126/326 Digital operator extension cable

200 V

Specifications Model

1x200 V 0.12 Kw 0.8 A CIMR-J7AZB0P10

0.25 Kw 1.6 A CIMR-J7AZB0P20

0.55 Kw 3.0 A CIMR-J7AZB0P40

1.1 Kw 5.0 A CIMR-J7AZB0P70

1.5 Kw 8.0 A CIMR-J7AZB1P50

3x200 V 0.12 Kw 0.8 A CIMR-J7AZ20P10

0.25 Kw 1.6 A CIMR-J7AZ20P20

0.55 Kw 3.0 A CIMR-J7AZ20P40

1.1 Kw 5.0 A CIMR-J7AZ20P70

1.5 Kw 8.0 A CIMR-J7AZ21P50

2.2 Kw 11.0 A CIMR-J7AZ22P20

4.0 Kw 17.5 A CIMR-J7AZ24P00

362 Frequency inverters

400 V

Specifications Model

3x400 V 0.37 Kw 1.2 A CIMR-J7AZ40P20

0.55 Kw 1.8 A CIMR-J7AZ40P40

1.1 Kw 3.4 A CIMR-J7AZ40P70

1.5 Kw 4.8 A CIMR-J7AZ41P50

2.2 Kw 5.5 A CIMR-J7AZ42P20

3.0 Kw 7.2 A CIMR-J7AZ43P00

4.0 Kw 9.2 A CIMR-J7AZ44P00

Page 13

ALine filters

12.2 (0.48)

9.3 (0.37)

1.7 (0.07)

Voltage Model CIMR-J7AZ Schaffner Rasmi Rated current (A) Weight (kg)

Inverter Line filter

20P1 / 20P2 / 20P4 / 20P7 3G3JV-PFI2010-SE 3G3JV-PFI2010-E 10 0.68

3-phase 200 VAC

21P5 / 22P2 3G3JV-PFI2020-SE 3G3JV-PFI2020-E 16 0.84

24P0 --- 3G3JV-PFI2030-E 26 1.0

Single-phase 200 VAC

B0P1 / B0P2 / B0P4 3G3JV-PFI1010-SE 3G3JV-PFI1010-E 10 0.45

B0P7 / B1P5 3G3JV-PFI1020-SE 3G3JV-PFI1020-E 20 0.68

40P2 / 40P4 3G3JV-PFI3005-SE 3G3JV-PFI3005-E 5 0.57

3-phase 400 VAC

40P7 / 41P5 / 42P2 3G3JV-PFI3010-SE 3G3JV-PFI3010-E 10 0.67

43P0 / 44P0 3G3JV-PFI3020-SE 3G3JV-PFI3020-E 20 / 15 1.0

B Accessories

Type Model Description Funtions

Digital operator

JVOP-146

JVOP-144

Remote digital operator

without potentiometer

Remote digital operator

with potentiometer

23.1

(0.43)

58 (2.28)

23.1

(0.91)

(0.43)

58 (2.28)

(0.91)

DATA

DSPL

DATA

ENTER

78 (3.07) 88 (3.46)

(15.5)

STOP

78 (3.07) 88 (3.46)

RUN

STOP RESET

15.5 (0.61)

4-4.4 dia. MTG holes

(0.2)

4-4.4 dia. MTG holes

DIGITAL OPERATOR JVOP-140

MIN MAX

80 (3.15)

1.7 (0.07)

12.2 (0.48)

(0.2)

80 (3.15)

1.7

(0.07)

12.2

(0.48)

9.3 (0.37)

30.4

(1.20)

30.4

(1.20)

10.5 (0.41)

50 (1.97)

18.2 (0.72)

50 (1.97)

56 (2.20)

4-M4 spot facing deep 3.5 (0.14)

56 (2.20)

4-M4 spot facing deep 3.5 (0.14)

68 (2.68)

Varispeed J7 363

Page 14

Type Model Description Funtions

SI-232/J7 (3G3JV-PSI232J)

Another option SI-232/J7C (3G3JV-PSI232JC) is available, the only difference is that this one is removable.

RS232 adapter

(0.63)

15.5

(0.61)

21.5 (0.85)

63(2.48)

(1.14)

2.5 (0.1)

19 (0.75)

8(0.31

SI-485/J7 (3G3JV-PSI485J)

Interface units

RS485 adapter

SI232/J7 must be connected

Accessories

3G3IV-PCN126 3G3IV-PCN326

3G3IV-PCN329-E

Digital operator extension cable

1 meter

3 meters

PC configuration cable

B Accessories

Type Model Description Installation

Software

CX-drive Computer software Configuration and monitoring software tool for drives.

CX-One Computer software Complete OMRON automation software including CX-drive.

16(0.63)

12 (0.47)

13(0.51)

4 3.8(0.15)=15.2(0.6)

63 (2.48)

(1.14)

(0.3) (0.75)

(0.3)

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. I19E-EN-02

In the interest of product improvement, specifications are subject to change without notice.

364 Frequency inverters

Omron Varispeed J7 CIMR-J7AZ System Configuration Manual

Specifications and Main Features

Frequently Asked Questions

User Manual