Omron RX-A2004, RX-A2022, RX-A2007, RX-A2015, RX-A2037 Datasheet

» Built-in know-how functionality

» Uncompromising Omron quality

» High motor-control performance

Customised to your machine

RX INVERTER

Omron realises that you need quality

and reliability, plus the ability to easily and

quickly customise your inverter to the

application in hand. And with the RX, you have

the perfect tool for the job.

Naturally it combines the same high level of

quality and performance for which Omron is

renowned. It also has abundant application

functionality on board and you can customise it

yourself to match your precise requirements.

Key features include:

• Up to  kW

• Built-in EMC filter

• Sensor-less and vector closed-loop control

• High starting torque in open loop

(% at . Hz)

• Full torque at  Hz in closed loop

• Built-in logic programmability

• Built-in application functionality

• Automatic energy saving

• Micro-surge voltage suppression

• Built-in Modbus RS

(options for other networks)

Customise your inverter

CX-Drive enables you to make your own
programs to suit your machine, e.g. for
an unwinding application.

Positioning functionality

Simple positioning is handled by
the inverter itself without the need for
an external motion controller.
Functions include pulse trace position
control mode, homing and position
teaching.

Focused on application

The inverter is pre-programmed with
special application functionality, e.g.
brake control, by-pass motor control,
orientation stop, interruption filling
and switching from speed to
positioning control, etc.

High performance

to match your application

4

4

T

T

E

E

N

N

AAA

A

N

N

C

C

E

E

Y

E

Sensor-less vector control
at 0 Hz domain

With the benefit of patented 0 Hz
domain open-loop control mode, the
RX can develop 150% torque at 0 Hz
allowing zero speed load holding.
Moreover, an improved sensor-less
vector control algorithm enables the RX
to develop more than 200% starting
torque at 0.3 Hz.

Cost and space saving filter

The RX has a built-in EMC filter that
saves on cost and space compared
with the standard external filter
solution.

3 ph : EN61800-3 cat. C2

Long life design

RX has been designed with high quality
components to guarantee a long
operation life and minimise downtime.
It includes a versatile maintenance
function that warns the user in the
event of DC bus capacitor temperature
rise or cooling speed reduction.

100%

200%

Torque

(percentage of rating)

600 1200 1800

Rotation speed (min)

120
110
100
90
80

70

60

50

40

30
20
10

0

Frequency (Hz)

Level (dBV)

Conducted emission data

Integrated EMC filter

No filter

500k 1M 2M 5M 10M 20M 30M200150

From high torque to

high motor efficiency...

Reliability with environmental
responsibility

Omron is renowned for the reliability
of its products. Moreover, Omron’s
policy is to offer environmentally
safe products free from any banned
substances.

6 Frequency inverters

RX

Customised to your machine

• Up to 132 kW

• High starting torque in open loop: 200% at 0.3Hz

• Full torque at 0 Hz in closed loop

• Sensor-less and vector closed-loop control

• Built-in EMC filter

• Built-in logic programmability

• Built-in application functionality

• Positioning functionality

• Automatic energy saving

• Micro-surge voltage suppression

• Modbus RS485 (options for other networks)

• CE, cULus, RoHS

Ratings

• 200 V Class three-phase 0.4 to 55 kW

• 400 V Class three-phase 0.4 to 132 kW

System configuration

Choke

LCD 2 lines
Remote Operator

Remote Operator
Extansion Cable

Output AC Reactor

Braking chopper

Braking Resistor

Option units

ACTIVE
POWER

OVERCURRENT

BUSS

BUSS+RR

BC...

CHOPPER

DANGER
HIGH VOLTAGE !

RJ45 - USB Cable

CX-Drive
CX-One

MCCB

RX

Filter

Input AC Reactor

Motor

Ground

Power
Supply

DC Reactor

C
2
2

R
5
2

C
2
4

P
E

C
1
6

U
1
1

U

8

R
6

C
2
6

C
2

8

J
P

3

U

6

U

7

T

1

U
9

+

+

R
1
5

R
1
5

R
2
5
R
1
5

R
2

0

R

3

0

R
7

R
5

C

5

R

2
1

U
1
4

C
1
7

R
1
4

R
2

8

R

R

11

J

P

1

C
1

U

1

0

C

3

R

5
R

1
R

2

R

3

6

R

3

C

2

1

R

3

5

R
7
0

R

1

2

0

R7

5

R7

8

R

1

1

4

C

2

2

+

+

U
1

+

C

3

5

R

9

9

U

1
2

R

9

5

R

3

9

R
4

0

R
5

7

R

56

D
6

R
6

U
1

5

R
5
4

R

5
5

R

8

T

R

2

1

1

R

1

1

R

1

1

0

R

1

0

7

R

1

1

3

TR1

C

1

3

U
1

3

C
1
0

S

I

­N

C

O

D

E
N
o

.

U
1
7

7

3

6
0

0

­C

0
2

1
0

J
P
5

J
P
6

R
T
4

R

1

0

R

1

0

R

1

0

5

R
1

0
2

C

1
2

C
1
1

R
9

4

R
9

7

R

9
6

C
20

R
9
5

C

3

9

R

1

3

1

Y
1

U

1

0

C

3

3

7

Type designation

200 V class

400V class

Specifications

Three-phase: RX-@ A2004 A2007 A2015 A2022 A2037 A2055 A2075 A2110 A2150 A2185 A2220 A2300 A2370 A2450 A2550

Motor kW

1

1. Based on a standard 3-Phase standard motor.

0.4 0.75 1.5 2.2 4.0 5.5 7.5 11 15 18.5 22 30 37 45 55

Output

characteristics

Inverter

capacity kVA

200 V

1.0 1. 7 2.5 3.6 5.7 8.3 11.0 15.9 22.1 26.3 32.9 41.9 50.2 63.0 76.2

240 V

1.2 2. 0 3.1 4.3 6.8 9.9 13.3 19.1 26.6 31.5 39.4 50.2 60.2 75.6 91.4

Rated output current (A) 3.0 5. 0 7.5 10.5 16.5 24 32 46 64 76 95 121 145 182 220
Max. output voltage Proportional to input voltage: 0..240 V
Max. output frequency 400 Hz

Power

supply

Rated input voltage
and frequency

3-phase 200..240 V 50/60 Hz

Allowable voltage
fluctuation

-15%..+10%

Allowable frequency
fluctuation

5%

Braking

Regenerative braking Internal BRD circuit (external discharge resistor)

External regenerative braking unit

Minimum connectable
resistance

50 50 35 35 35 16 10 10 7.5 7.5 5

Protective structure

IP20

Cooling method

Forced air cooling

Three-phase: RX-@ A4004 A4007 A4015 A4022 A404 0 A4055 A4075 A4110 A4150 A4185 A4220 A4300 A4370 A4450 A4550 B4750 B490 0 B411K B413K

Motor kW

1

1. Based on a standard 3-Phas e standard motor.

0.4 0.75 1.5 2.2 4.0 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132

Output

characteristics

Inverter

capacity kVA

400 V

1.0 1.7 2.5 3.6 6.2 9.7 13.1 17.3 22.1 26.3 33.2 40.1 51.9 63.0 77.6 103.2 121.9 150.3 180.1

480 V

1.2 2.0 3.1 4.3 7.4 11.6 15.8 20.7 26.6 31.5 39.9 48.2 62 .3 75.6 93.1 123.8 146.3 180.4 216.1

Rated output current (A) 1.5 2.5 3.8 5.3 9.0 14 19 25 32 38 48 58 75 91 112 149 176 217 260
Max. output voltage Proportional to input voltage: 0..480 V
Max. output frequency 400 Hz

Power

supply

Rated input voltage
and frequency

3-phase 380..480 V 50/60 Hz

Allowable voltage
fluctuation

-15%..+10%

Allowable frequency
fluctuation

5%

Braking

Regenerative braking Internal BRD circuit (external discharge resistor)

External regenerative braking unit

Minimum connectable
resistance

100 100 100 100 70 70 35 35 24 24 20

Protective structure

IP20 IP00

Cooling method

Forced air cooling

RX series

A: IP20
B: IP00

RX A4004-EF

Vol tage:
2: Three-phase 200 VAC
4: Three-phase 400 VAC

Max. applicable motor output
004: 0,4kW

~

13K: 132 kW

E: Europe standard

F: Built-in filter

8 Frequency inverters

Common specifications

Model number

RX@

Specifications

Control functions

Control methods

Phase-to-phase sinusoidal pulse with modulation PWM (Sensorless vector control, close loop vector with motor feedback,
V/F)

Output frequency range

0.10 to 400.00 Hz

Frequency precision

Digital set value: ±0.01% of the max. frequency
Analogue set value: ±0.2% of the max. frequency (25 ±10 ºC)

Resolution of frequency set value

Digital set value: 0.01 Hz
Analog input: 12 bit

Resolution of output frequency

0.01Hz

Starting torque

150%/0.3 Hz (under sensor-less vector control or sensor-less vector control at 0 Hz)
200%/Torque at 0 Hz (under sensor-less vector control at 0Hz, when a motor size one rank lower than specified is connected)

Overload capability

150%/60 s, 200%/3 s

Frequency set value

0 to 10V DC (10KΩ), -10 to 10V DC (10KΩ), 4 to 20mA (100Ω), RS485 Modbus, Network options

V/f Characteristics

V/f optionally changeable at base frequencies of 30 to 400 Hz, V/f braking constant torque, reduction torque, sensor-less vec­tor control, sensor-less vector control at 0 Hz

Functionality

Inputs signals

8 terminals, NO/NC switchable, sink/source logic switchable
[Terminal function] 8 functions can be selected from among 61.
Reverse (RV), Multi-step speed setting binary 1 (CF1), Multi-step speed setting binary 2 (CF2), Multi-step speed setting bi­nary 3 (CF3), Multi-step speed setting binary 4 (CF4), Jogging (JG), DC injection braking (DB), 2nd control (SET), 2-step
acceleration/deceleration (2CH), Free-run stop (FRS), External trip (EXT), USP function (USP), Commercial switching (CS),
Soft lock (SFT), Analog input switching (AT), 3rd control (SET3), Reset (RS), 3-wire start (STA), 3-wire stop (STP), 3-wire
forward/reverse (F/R), PID enabled/disabled (PID), PID integral reset (PIDC), Control gain switching (CAS),
UP/DWN function accelerated (UP), UP/DWN function decelerated (DWN), UP/DWN function data clear (UDC), Forced op­erator (OPE), Multi-step speed setting bit 1 (SF1), Multi-step speed setting bit 2 (SF2), Multi-step speed setting bit 3 (SF3),
Multi-step speed setting bit 4 (SF4), Multi-step speed setting bit 5 (SF5), Multi-step speed setting bit 6 (SF6), Multi-step speed
setting bit 7 (SF7), Overload limit switching (OLR), Torque limit enabled (TL), Torque limit switching 1 (TRQ1), Torque limit
switching 2 (TRQ2),
P/PI switching (PPI), Brake confirmation (BOK), Orientation (ORT), LAD cancel (LAC), Position deviation clear (PCLR), Pulse
train position command input permission (STAT), Frequency addition function (ADD), Forced terminal block (F-TM), Torque
reference input permission (ATR), Integrated power clear (KHC), Servo ON (SON), Preliminary excitation (FOC), Analog
command on hold (AHD), Position command selection 1 (CP1), Position command selection 2 (CP2), Position command se­lection 3 (CP3), Zero return limit signal (ORL), Zero return startup signal (ORG), Forward driving stop (FOT), Reverse driving
stop (ROT), Speed/Position switching (SPD), Pulse counter (PCNT), Pulse counter clear (PCC), No allocation (no)

Output signals

5 open collector output terminals: NO/NC switchable, sink/source logic switchable
1 relay (SPDT contact) output terminal: NO/NC switchable
[Terminal function] 6 functions can be selected from among 45.
Signal during RUN (RUN), Constant speed arrival signal (FA1), Over set frequency arrival signal (FA2), Overload warning
(OL), Excessive PID deviation (OD), Alarm signal (AL), Set-frequency-only arrival signal (FA3), Overtorque (OTQ), Signal
during momentary power interruption (IP), Signal during undervoltage (UV), Torque limit (TRQ), RUN time exceeded (RNT),
Power ON time exceeded (ONT), Thermal warning (THM), Brake release (BRK), Brake error (BER), 0-Hz signal (ZS), Ex­cessive speed deviation (DSE), Position ready (POK), Set frequency exceeded 2 (FA4), Set frequency only 2 (FA5), Overload
warning 2 (OL2), Analog FV disconnection detection (FVDc), Analog FI disconnection detection (FIDc), Analog FE discon­nection detection (FEDc), PID FB status output (FBV), Network error (NDc), Logic operation output 1 (LOG1), Logic operation
output 2 (LOG2), Logic operation output 3 (LOG3), Logic operation output 4 (LOG4), Logic operation output 5 (LOG5), Logic
operation output 6 (LOG6), Capacitor life warning (WAC), Cooling fan life warning (WAF), Starting contact signal (FR), Fin
overheat warning (OHF), Light load detection signal (LOC), Operation ready (IRDY), Forward run (FWR), Reverse run (RVR),
Fatal fault (MJA), Window comparator FV (WCFV), Window comparator FI (WCFI), Window comparator FE (WCFE), Alarm
codes 0 to 3 (AC0 to AC3)

Standard functions

V/f free setting (7), Upper/lower frequency limit, Frequency jump, Curve acceleration/deceleration, Manual torque boost level/
break, Energy-saving operation, Analog meter adjustment, Starting frequency, Carrier frequency adjustment, Electronic ther­mal function, (free setting available), External start/end (frequency/rate), Analog input selection, Trip retry, Restart during mo­mentary power interruption, Various signal outputs, Reduced voltage startup, Overload limit, Initialization value setting,
Automatic deceleration at power-off, AVR function, Automatic acceleration/deceleration, Auto tuning (Online/Offline), High
torque multi-motor operation control (sensor-less vector control of two monitors with one Inverter)

Analogue inputs

Analogue inputs 0 to 10V and -10 to 10 V (10KΩ), 4 to 20mA (100Ω)

Analogue outputs

Analog voltage output, Analog current output, Pulse train output

Accel/Decel times

0.01 to 3600.0s (line/curve selection)

Display

Status indicator LED’s Run, Program, Power, Alarm, Hz, Amps , Volts, %
Digital operator: Available to monitor 23 items, output current, output frequency...

Protection functions

Motor overload protection

Electronic Thermal overload relay and PTC thermistor input

Instantaneous overcurrent

200% of rated current for 3 seconds

Overload

150% for 1 minute

Overvoltage

800V for 400V type and 400V for 200V type

Momentary power loss

Decelerates to stop with DC bus controlled, coast to stop

Cooling fin overheat

Temperature monitor and error detection

Stall prevention level

Stall prevention during acceleration, deceleration and constant speed

Ground fault

Detection at power on

Power charge indication

On when voltage between P and N is higher than 45V

Ambient conditions

Degree of protection

IP20 / IP00

Ambient humidity

90% RH or less (without condensation)

Storage temperature

-20 ºC..+65 ºC (short-term temperature during transportation)

Ambient temperature

−10°C to 50°C

Installation

Indoor (no corrosive gas, dust, etc.)

Installation height

Max. 1000 m

Vibration

RX-A004 to A220, 5.9 m/s

2

(0.6G), 10 to 55 Hz

RX-A300 to B13K, 2.94 m/s

2

(0.3G), 10 to 55 Hz

9

Dimensions

W

2-φ6

W1

W2

6

D

D1

H1

H

Figure 1

W1

7

W2

D2

D1

H1

H

2-φ7

W

D

Figure 3

W

10

H1

H

2-φ10

D

W1

Figure 4

W2

D1

D2

2-φ7

W1

7

H1

H

W

D

Figure 2

10 Frequency inverters

Voltage class Inverter model RX@ Figure

Dimensions in mm

W W1 W2 H H1 D D1 D2 Weight (KG)

Three-phase

200 V

A2004

1 150 130 143 255 241 140 62 - 3.5

A2007

A2015

A2022

A2037

A2055

2 210 189 203 260 246 170 82 13.6 6A2075

A2110

A2150

3 250 229 244 390 376 190 83 9.5 14A2185

A2220

A2300

4

310 265 - 540 510 195 - - 20

A2370

390 300 - 550 520 250 - - 30

A2450

A2550 480 380 - 700 670 250 - - 43

Three-phase

400 V

A4004

1 150 130 143 255 241 140 62 - 3.5

A4007

A4015

A4022

A4040

A4055

2 210 189 203 260 246 170 82 13.6 6A4075

A4110

A4150

3 250 229 244 390 376 190 83 9.5 14A4185

A4220

A4300

4

310 265 - 540 510 195 - - 22

A4370

390 300 - 550 520 250 - - 30A4450

A4550

B4750

5

390 300 - 700 670 268 - - 60

B4900

B411K

480 380 - 740 710 270 - - 80

B413K

2-φ12

2-12

300

390

268

700

79

670

357

Figure 5

11

Rasmi Filters

Voltage Inverter model Rasmi model

Dimensions

Weight

KG

L W H X Y M Filter type

3x200 V

RX-A2004

AX-FIR2018-RE 305 125 45 290 110 M5

Footprint

2.0

RX-A2007

RX-A2015

RX-A2022

RX-A2037

RX-A2055

AX-FIR2053-RE 312 212 56 296 189 M6 2.5RX-A2075

RX-A2110

RX-A2150

AX-FIR2110-RE

455 110 240 414 80 Book type

8.0RX-A2185

RX-A2220

RX-A2300 AX-FIR2145-RE 8.6

RX-A2370

AX-FIR3250-RE

386 260 135 240 235 - Block type

13

RX-A2450

RX-A2550 AX-FIR3320-RE 13.2

3x400 V

RX-A4004

AX-FIR3010-RE 305 125 45 290 110 M5

Footprint

1.9

RX-A4007

RX-A4015

RX-A4022

RX-A4040

RX-A4055

AX-FIR3030-RE 312 212 50 296 189 M6 2.2RX-A4075

RX-A4110

RX-A4150

AX-FIR3053-RE 451 252 60 435 229 M6 4.5RX-A4185

RX-A4220

RX-A4300 AX-FIR3064-RE 598 310 70 578 265 M8 7.0

RX-A4370 AX-FIR3100-RE

455 110 240 414 80 - Book type

8.0

RX-A4450

AX-FIR3130-RE 8.6

RX-A4550

RX-B4750

AX-FIR3250-RE

386 260 135 240 235 - Blcok type

13.0

RX-B4900

RX-B411K

AX-FIR3320-RE 13.2

RX-B413K

drive mounts

W

H

Y

XL

output
flexes

WH

Y

XL

Footprint Dimensions Book Type Dimensions

Y

W

H

LX

Block Type Dimensions

12 Frequency inverters

Input AC Reactor

DC Reactor

Voltage Reference

Dimensions Weight

Kg

A B1

B2 C1 C2 D E F

200V

AX-RAI02800100-DE

120

-

80

-

120 80 62 5.5 2.35

AX-RAI00880200-DE
AX-RAI00350335-DE

180

85

190

140

55

6

5.5

AX-RAI00180670-DE
AX-RAI00091000-DE 205 6.5
AX-RAI00071550-DE 105 205 85 11.7
AX-RAI00042300-DE 240 130 - 210 - 200 75 16.0

400V

AX-RAI07700050-DE

120

-

70

120 80

52

5.5

1.78

AX-RAI03500100-DE

80 62

2.35
AX-RAI01300170-DE 2.5
AX-RAI00740335-DE

180

85

190

140

55

6

5.5

AX-RAI00360500-DE

205

6.5
AX-RAI00290780-DE 105 85 11.7
AX-RAI00191150-DE 240 110 275 200 75 16.0

200V 400V

Reference

AX-RC

Fig Dimensions KgReference

AX-RC

Fig Dimensions

Kg

A

B C D E F G H

A

B C D E F G H

21400016-DE

1

84 113

96

101 66 5 7.5 2

1.22

43000020-DE

1

84 113

96

101 66 5 7.5 2

1.22

10700032-DE 27000030-DE

105 1.60

06750061-DE

105 1.60

14000047-DE

03510093-DE 10100069-DE

116 1.95

02510138-DE

116 1.95

06400116-DE

108 135 133 120 82 6.5

9.5

9.5 3.70

01600223-DE

108 135 124 120 82 6.5

9.5

9.5 3.20

04410167-DE

120 152

136

135 94 7

-

5.20

01110309-DE

120 152

136

135 94

7-

5.20

03350219-DE

146 6.00

00840437-DE

146 6.00

02330307-DE

150 177

160

160 115 7 2

11.4

00590614-DE

150 177

160

160 115 2

11.4

01750430-DE

182.6 14.3

00440859-DE

182.6 14.3

01200644-DE

2

195

161

162.5 185

88

10

--

17.0

00301275-DE

2

195

161

162.5 185

88

10

--

17.0

00920797-DE 196 123 25.5

00231662-DE

196 123 25.5

00741042-DE

240

188

200 228

109

12

34.0

00192015-DE

240

188

200 228

109

12

34.0

00611236-DE 198 119 38.0

00162500-DE

198 119 38.0

00501529-DE 228 149 42.0

00133057-DE

228 149 42.0

Figure 1

C

D

A

F

E

B

Figure 2

13

Output AC Reactor

Chokes

Braking Unit Dimensions

Reference

Dimensions Weight

Kg

A

B2 C2 D E F
AX-RAO11500026-DE 120 70 120 80 52 5.5 1.78
AX-RAO07600042-DE 120 70 120 80 52 5.5 1.78
AX-RAO04100075-DE 120 80 120 80 62 5.5 2.35
AX-RAO03000105-DE 120 80 120 80 62 5.5 2.35
AX-RAO01830180-DE 180 85 190 140 55 6 5.5
AX-RAO01150220-DE 180 85 190 140 55 6 5.5
AX-RAO00950320-DE 180 85 205 140 55 6 6.5
AX-RAO00630430-DE 180 95 205 140 65 6 9.1
AX-RAO00490640-DE 180 95 205 140 65 6 9.1
AX-RAO16300038-DE 120 70 120 80 52 5.5 1.78
AX-RAO11800053-DE 120 80 120 80 52 5.5 2.35
AX-RAO07300080-DE 120 80 120 80 62 5.5 2.35
AX-RAO04600110-DE 180 85 190 140 55 6 5.5
AX-RAO03600160-DE 180 85 205 140 55 6 6.5
AX-RAO02500220-DE 180 95 205 140 55 6 9.1
AX-RAO02000320-DE 180 105 205 140 85 6 11.7

Reference D

diameter

Motor

KW

Dimensions Weight

Kg

L W H X Y m
AX-FER2102-RE 21 < 2.2 85 22 46 70 - 5 0.1
AX-FER2515-RE 25 < 15 105 25 62 90 - 5 0.2
AX-FER5045-RE 50 < 45 150 50 110 125 30 5 0.7
AX-FER6055-RE 60 > 45 200 65 170 180 45 6 1.7

Reference

Dimensions

B B1 H H1 T S

AX-BCR4015045-TE

82.5 40.5 150 138 220 6

AX-BCR4017068-TE
AX-BCR2035090-TE

130 64.5 205 193 208 6

AX-BCR2070130-TE
AX-BCR4035090-TE
AX-BCR4070130-TE
AX-BCR4090240-TE 131 64.5 298 280 300 9

X

H

YW

Ø m

L

Ø d

S

B

H1

T1B

H

ACTIVE
POWER

OVERCURRENT

BUSS

BUSS+

R

R

BC...

CHOPPER

DANGER
HIGH VOLTAGE !

14 Frequency inverters

Resistor Dimensions

Type Fig.

Dimensions

Weight

L H M I T KG

AX-REM00K2070-IE

1

105 27 36 94 - 0.2AX-REM00K2120-IE

AX-REM00K2200-IE

AX-REM00K4075-IE

200 27 36 189 - 0.425AX-REM00K4035-IE

AX-REM00K4030-IE

AX-REM00K5120-IE 260 27 36 249 - 0.58

AX-REM00K6100-IE

320 27 36 309 - 0.73

AX-REM00K6035-IE

AX-REM00K9070-IE

2 200 62 100 74 - 1.41AX-REM00K9020-IE

AX-REM00K9017-IE

AX-REM01K9070-IE

3 365 73 105 350 70 4

AX-REM01K9017-IE

AX-REM02K1070-IE

4

310 100 240 295 210 7

AX-REM02K1017-IE

AX-REM03K5035-IE

365 100 240 350 210 8

AX-REM03K5010-IE

AX-REM19K0006-IE

5

140 350 180 100 160 6

AX-REM19K0008-IE

AX-REM19K0020-IE

AX-REM19K0030-IE

AX-REM38K0012-IE 240 350 180 200 160 11

AX-REM00K1xxx

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5

15

Standard connections

Terminal Block Specifications

Terminal Name Function (signal level)

R/L1, S/L2, T/L3

Main circuit power supply input Used to connect line power to the drive.

U/T1, V/T2, W/T3

Inverter output Used to connect the motor

PD/+1, P/+

External DC reactor terminal Normally connected by the short-circuit bar. Remove the short-circuit bar between +1 and P/

+2 when a DC reactor is connected.

P/+, RB

Braking resistor
connection terminals

Connect option braking resistor (if a braking torque is required)

P/+, N/-

Regenerative braking
unit connection terminal

Connect optional regenerative braking units.

Grounding For grounding (grounding should conform to the local grounding code.)

DC reactor
(optional)

3-phase 200 V AC
3-phase 400 V AC

Multi-function input 1

Multi-function input 2

Multi-function input 3

Multi-function input 4

Multi-function input 5

Multi-function input 6

Multi-function input 7

Multi-function input 8

Frequency reference power supply

Frequency setting unit
500 to 2 kΩ

Frequency reference input (voltage)

Frequency reference auxiliary input (voltage)

Frequency reference input (current)

Frequency reference common

Sequence input common

M

R/L1

PD/+1 P/+

Braking resistor
(optional)

RBN/-

T/L3

R

T

Ro

To

S/L2

U/T1

W/T3

12 Multi-function output 2

13 Multi-function output 3

14 Multi-function output 4

15 Multi-function output 5

CM2

SP

SN

RP

SN

AM

AMI

FM

Option 1

Option 1

Multi-function output common

11 Multi-function output 1

Relay output *1

Common

V/T2

1

FW

P24

CM1

4

PLC

Thermistor

TH

H

OI

L

O

O2

3

2

5

RS485 communication

6

7

8

Short-circuit

wire

To wire the control circuit power

supply and main circuit power
supply separately, be sure to

remove the J51 connector
wire first.

Control circuit
power supply

J51

For termination
resistors

Analog monitor output
(voltage output)

Analog monitor output
(current output)

Digital monitor output
(PWM output)

AL1

AL2

AL0

16 Frequency inverters

Control Circuit

Type No.

Signal name Function Signal level

Frequency reference input

H

Frequency reference power supply 10 V DC 20mA max

O

Voltage frequency reference input 0 to 12V DC (10 KΩ)

O2

Voltage auxiliary frequency reference 0 to +/- 12V DC (10 KΩ)

OI

Current frequency reference input 4 to 20mA (100 Ω)

L

Frequency reference common -

Monitor

Output

AM

Multi-function analog voltage output Factory setting: Output frequency 2mA max

AMI

Multi-function analog current output Factory setting: Output frequency

4 to 20mA
(max imp 250Ω)

FM

PWM monitor output Factory setting: Output frequency

0 to 10V DC
Max 3.6 kHz

Power

Supply

P24

Internal 24V DC Power supply for contact input signal 100mA max

CM1

Input common Common terminal for P24, TH and analog monitor (AM, AMI, MP) terminals

Function

Selection

FW

Forward rotation command terminal Motor runs in forwards direction when FW is ON

27V DC max
Input imped 4.7KΩ
Max current 5.6mA
On: 18V DC or more

1

Multi-function input

Factory setting: Reverse (RV)

2

Factory setting: External trip (EXT)

3

Factory setting: Reset (RS)

4

Factory setting: Multi-step speed reference 1 (CF1)

5

Factory setting: Multi-step speed reference 2 (CF2)

6

Factory setting: Jogging (JG)

7

Factory setting: Second control (SET)

8

Factory setting: No allocation (NO)

PLC

Multi-function input common

Sink logic: Short-circuiting P24 and CM1
Source logic: Short-circuiting PSC and CM1
With external supply remove short-circuit bar

Status/ Factor

11

Multi-function output

Factory setting: During Run (RUN)

27V DC max
50 mA max

12

Factory setting: 0 Hz signal (ZS)

13

Factory setting: Overload warning (OL)

14

Factory setting: Overtorque (OTQ)

15

Factory setting: Constant speed arrival (FA1)

CM2

Multi-function output common Common terminal for multi-function output terminals P1 to P5

Relay

output

AL1

Relay output (Normally close)

Factory setting: Alarm output (AL)

Under normal operation

MA-MC open

MB-MC close

R load

AL1-AL0

250VAC 2A

AL2-AL0

250VAC 1A

I load

250V AC 0.2A

AL2

Relay output (Normally open)

AL0

Relay output common

Sensor TH

External thermistor input terminal

SC terminal functions as the common terminal

100mW minimum

Impedance at temperature error: 3KΩ

0 to 8V DC

Comms

SP

RS485 Modbus terminals - Differential input

SN

RP

RS485 terminating resistor terminals --

SN

17

Inverter heat loss
Three-phase 200 V class

Three-phase 400 V class

Input AC Reactor

Model RX- A2004 A2007 A2015 A2022 A2037 A2055 A2075 A2110 A2150 A2185 A2220 A2300 A2370 A2450 A2550

Inverter

capacity

kVA

200 V

1.0 1.7 2.5 3.6 5.7 8.3 11.0 15.9 22.1 26.3 32.9 41.9 50.2 63.0 76.2

240 V

1.2 2.0 3.1 4.3 6.8 9.9 13.3 19.1 26.6 31.5 39.4 50.2 60.2 75.6 91.4

Rated current (A)

3.0 5.0 7.5 10.5 16.5 24 32 46 64 76 95 121 145 182 220

Heat

loss W

Losses at 70% load

64 76 102 127 179 242 312 435 575 698 820 1100 1345 1625 1975

Losses at 100% load

70 88 125 160 235 325 425 600 800 975 1150 1550 1900 2300 2800

Efficiency at rated output

85.1 89.5 92.3 93.2 94.0 64.4 94.6 94.8 94.9 95.0 95.0 95.0 95.1 95.1 95.1

Cooling Method

Forced-air-cooling

Model RX- A4004 A4007 A4015 A4022 A4040 A4055 A4075 A4110 A4150 A4185 A4220 A4300 A4370 A4450 A4550 B4750 B4900 B411K B413K

Inverter

capacity

kVA

400V

1.0 1.7 2.5 3.6 6.2 9.7 13.1 17.3 22.1 26.3 33.2 40.1 51.9 63.0 77.6 103.2 121.9 150.3 180.1

480V

1.2 2.0 3.1 4.3 7.4 11.6 15.8 20.7 26.6 31.5 39.9 48.2 62.3 75.6 93.1 123.8 146.3 180.4 216.1

Rated current (A)

1.5 2.5 3.8 5.3 9.0 14 19 25 32 38 48 58 75 91 112 149 176 217 260

Heat

lloss W

Losses at

70% load

64 76 102 127 179 242 312 435 575 698 820 1100 1345 1625 1975

2675 3375 3900 4670

Losses at

100% load

70 88 125 160 235 325 425 600 800 975 1150 1550 1900 2300 2800

3800 4800 5550 6650

Efficiency at rated

output

85.1 89.5 92.3 93.2 94.0 64.4 94.6 94.8 94.9 95.0 95.0 95.0 95.1 95.1 95.1

95.2 95.2 95.2 95.2

Cooling Method Forced-air-cooling

3 phase 200 V class 400 V class

Max. applicable

motor output kW

Reference

Current value AInductancemHMax. applicable

motor output kW

Reference

Current value AInductance

mH

0.4 to 1.5 AX-RAI02800100-DE 10.0 2.8 0.4 to 1.5 AX-RAI07700050-DE

5.0 7.7

2.2 to 3.7 AX-RAI00880200-DE 20.0 0.88 2.2 to 3.7 AX-RAI03500100-DE 10.0 3.5

5.5 to 7.5 AX-RAI00350335-DE 33.5 0.35 5.5 to 7.5 AX-RAI01300170-DE

17.0 1.3

11.0 to 15.0 AX-RAI00180670-DE 67.0 0.18 11.0 to 15.0 AX-RAI00740335-DE

33.5 0.74

18.5 to 22.0 AX-RAI00091000-DE 100.0 0.09 18.5 to 22.0 AX-RAI00360500-DE

50.0 0.36

30.0 to 37.0 AX-RAI00071550-DE 155.0 0.07 30.0 to 37.0 AX-RAI00290780-DE

78.0 0.29

45.0 to 55.0 AX-RAI00042300-DE 230.0 0.04 45.0 to 55.0 AX-RAI00191150-DE

115.0 0.19

MCCB

Power supply

AC reactor

RX

R/L1U

V

W

X

YZS/L2

T/L3

18 Frequency inverters

DC Reactor

Output AC

Reactor

Braking Unit

200 V class 400 V class

Max. applicable

motor output kW

Reference

Current value AInductancemHMax. applicable

motor output kW

Reference

Current value AInductance

mH

0.4 AX-RC10700032-DE 3.2 10.70 0.4 AX-RC43000020-DE

2.0 43.00

0.7 AX-RC06750061-DE 6.1 6.75 0.7 AX-RC27000030-DE 3.0 27.00

1.5 AX-RC03510093-DE 9.3 3.51 1.5 AX-RC14000047-DE

4.7 14.00

2.2 AX-RC02510138-DE 13.8 2.51 2.2 AX-RC10100069-DE 6.9 10.10

3.7 AX-RC01600223-DE 22.3 1.60 4.0 AX-RC06400116-DE 11.6 6.40

5.5 AX-RC01110309-DE 30.9 1.11 5.5 AX-RC04410167-DE 16.7 4.41

7.5 AX-RC00840437-DE 43.7 0.84 7.5 AX-RC03350219-DE 21.9 3.35

11.0 AX-RC00590614-DE 61.4 0.59 11.0 AX-RC02330307-DE 30.7 2.33

15.0 AX-RC00440859-DE 85.9 0.44 15.0 AX-RC01750430-DE 43.0 1.75

18.5 to 22 AX-RC00301275-DE 127.5 0.30 18.5 to 22 AX-RC01200644-DE 64.4 1.20
30 AX-RC00231662-DE 166.2 0.23 30 AX-RC00920797-DE 79.7 0.92
37 AX-RC00192015-DE 201.5 0.19 37 AX-RC00741042-DE 104.2 0.74
45 AX-RC00162500-DE 250.0 0.16 45 AX-RC00611236-DE 123.6 0.61
55 AX-RC00133057-DE 305.7 0.13 55 AX-RC00501529-DE 152.9 0.50

200 V class 400 V class

Max. applicable

motor output kW

Reference

Current value AInductancemHMax. applicable

motor output kW

Reference

Current value AInductance

mH

0.4 AX-RAO11500026-DE 2.6 11.50

0.4 to 1.5 AX-RAO16300038-DE

3.8 16.30

0.75 AX-RAO07600042-DE 4.2 7.60

1.5 AX-RAO04100075-DE 7.5 4.10

2.2 AX-RAO03000105-DE 10.5 3.00 2.2 AX-RAO11800053-DE 5.3 11.80

3.7 AX-RAO01830160-DE 16.0 1.83 4.0 AX-RAO07300080-DE

8.0 7.30

5.5 AX-RAO01150220-DE 22.0 1.15 5.5 AX-RAO04600110-DE 11.0 4.60

7.5 AX-RAO00950320-DE 32.0 0.95 7.5 AX-RAO03600160-DE 16.0 3.60
11 AX-RAO00630430-DE 43.0 0.63 11 AX-RAO02500220-DE 22.0 2.50
15 AX-RAO00490640-DE 64.0 0.49 15 AX-RAO02000320-DE 32.0 2.00

Voltage Reference

Specifications

Permanent Peak (5s max) Minimum

connectable

resistor (Ohms)

Current (A) Brake power (KVA) Current (A) Brake power (KVA)

200V

AX-BCR2035090-TE 35 13 90 32 4
AX-BCR2070130-TE 70 25 130 47 2.8

400V

AX-BCR4015045-TE 15 11 45 33 16
AX-BCR4017068-TE 17 13 68 51 11
AX-BCR4035090-TE 35 26 90 67 8.5
AX-BCR4070130-TE 70 52 130 97 5.5
AX-BCR4090240-TE 90 67 240 180 3.2

Powe r
supply

RX

DC reactor

R/L1

PD/+1

P/+

MCCB

S/L2

T/L3

19

RX

Ordering information

Specifications Model Specifications Model

Voltage class Max motor kW

Rated current A

Standard Voltage class Max motor kW

Rated

current A

Standard

Three-phase

200 V

0.4 3.0 RX-A2004-EF

Three-phase

400 V

0.4 1.5 RX-A4004-EF

0.75 5.0 RX-A2007-EF 0.75 2.5 RX-A4007-EF

1.5 7.5 RX-A2015-EF 1.5 3.8 RX-A4015-EF

2.2 10.5 RX-A2022-EF 2.2 5.3 RX-A4022-EF

4.0 16.5 RX-A2037-EF 4.0 9.0 RX-A4040-EF

5.5 24 RX-A2055-EF 5.5 14 RX-A4055-EF

7.5 32 RX-A2075-EF 7.5 19 RX-A4075-EF

11 46 RX-A2110-EF 11 25 RX-A4110-EF

15 64 RX-A2150-EF 15 32 RX-A4150-EF

18.5 76 RX-A2185-EF 18.5 38 RX-A4185-EF

22 95 RX-A2220-EF 22 48 RX-A4220-EF

30 121 RX-A2300-EF 30 58 RX-A4300-EF

37 145 RX-A2370-EF 37 75 RX-A4370-EF

45 182 RX-A2450-EF 45 91 RX-A4450-EF

55 220 RX-A2550-EF 55 112 RX-A4550-EF

- - - 75 149 RX-B4750-EF

- - - 90 176 RX-B4900-EF

- - - 110 217 RX-B411K-EF

- - - 132 260 RX-B413K-EF

Choke

A

B

B

LCD 2 lines
Remote Operator

Remote Operator
Extansion Cable

A

A

D

A

Output AC Reactor

Braking chopper

RJ45 - USB Cable

C2
2

R
5

2

C
2
4

P
E

C
16

U
1
1

U

8

R
6

C
2
6

C
2

8

J
P

3

U

6

U

7

T

1

U
9

+

+

R15

R1

5

R25

R
1
5

R

2
0

R

3

0

R
7

R
5

C5

R
21

U1
4

C
1
7

R
1
4

R

2

8

R

R

1
1

J

P

1

C1

U

10

C

3

R

5
R

1
R

2

R

3

6

R

3

C

2

1

R

3

5

R

7
0

R
1
2

0

R

7

5

R

7

8

R
1

1

4

C

2

2

+

+

U
1

+

C

3

5

R9
9

U

1
2

R

9

5

R

3

9

R
4
0

R
5

7

R

5
6

D

6

R
6

U
1
5

R
5
4

R

5
5

R

8

T

R

2

1

1

R

1

1

R

1

1

0

R

1

0

7

R

1

1

3

T

R

1

C
1

3

U1

3

C

1
0

S

I

­N

CO

D

E

No

.

U

17

7

3

6
0
0

-C
0
21

0

J
P
5

JP
6

R
T4

R

1

0
R1

0

R

1

05

R

1
0
2

C
1
2

C

1
1

R9
4

R
9
7

R
96

C
2
0

R9
5

C

3

9

R

1

3

1

Y

1

U10

C

3

3

Option units

Braking Resistor

D

C

ACTIVE
POWER

OVERCURRENT

BUSS

BUSS+

R

R

BC...

CHOPPER

DANGER
HIGH VOLTAGE !

B

E

A

CX-Drive
CX-One

MCCB

RX

Filter

Input
AC Reactor

Motor

Ground

Power
Supply

DC Reactor

20 Frequency inverters

A Line filters

A Input AC Reactors

A DC Reactors

A Chokes

A Output AC Reactor

Rasmi Line filter

200V 400V

Model RX-@ Reference

Rated

current (A)

Leakage

Nom / Max

Kg Model RX-@ Reference

Rated

current (A)

Leakage

Nom / Max

Kg

A2004 / A2007/ A2015/

A2022 / A2037

AX-FIR2018-RE 18 0.7/40 mA 2.0

A4004/ A4007/ A4015/

A4022/ A4040

AX-FIR3010-RE 10 0.3/40 mA 1.9

A2055 / A2075 / A2110 AX-FIR2053-RE 53 0.7/40 mA 2.5 A4055 / A4075 / A4110 AX-FIR3030-RE 30 0.3/40 mA 2.2

A2150/ A2185/ A2220 AX-FIR2110-RE 110 1.2/70 mA 8.0 A4150/ A4185/ A4220 AX-FIR3053-RE 53 0.8/70 mA 4.5

A2300 AX-FIR2145-RE 145 1.2/70 mA 8.6 A4300 AX-FIR3064-RE 64 3/160 mA 7.0

A2370/ A2450 AX-FIR3250-RE 250 6/300 mA 13.0 A4370 AX-FIR3100-RE 100 2/130 mA 8.0

A2550 AX-FIR3320-RE 320 6/300 mA 13.2 A4450 / A4550 AX-FIR3130-RE 130 2/130 mA 8.6

-

A4750 / A4900 AX-FIR3250-RE 250 10/500 mA 13.0

A411K / A413K AX-FIR3320-RE 320 10/500 mA 13.2

Voltage

3-Phase 200 VAC 3-Phase 400 VAC

Inverter Model RX-@

AC Reactor Reference

Inverter Model RX-@

AC Reactor Reference

A2004 / A2007 / A2015 AX-RAI02800100-DE A4004 / A4007 / A4015 AX-RAI07700050-DE

A2022 / A2037 AX-RAI00880200-DE A4022 / A4040 AX-RAI03500100-DE

A2055 / A2075 AX-RAI00350335-DE A4055 / A4075 AX-RAI01300170-DE

A2110 / A2150 AX-RAI00180670-DE A4110 / A4150 AX-RAI00740335-DE

A2185 / A2220 AX-RAI00091000-DE A4185 / A4220 AX-RAI00360500-DE

A2300 / A2370 AX-RAI00071550-DE A4300 / A4370 AX-RAI00290780-DE

A2450 / A2550 AX-RAI00042300-DE A4450 / A4550 AX-RAI00191150-DE

Voltage

3-Phase 200 VAC 3-Phase 400 VAC

Inverter Model RX-@ AC Reactor Reference Inverter Model RX-@ AC Reactor Reference

A2004 AX-RC10700032-DE A4004 AX-RC43000020-DE

A2007 AX-RC06750061-DE A4007 AX-RC27000030-DE

A2015 AX-RC03510093-DE A4015 AX-RC14000047-DE

A2022 AX-RC02510138-DE A4022 AX-RC10100069-DE

A2037 AX-RC01600223-DE A4040 AX-RC06400116-DE

A2055 AX-RC01110309-DE A4055 AX-RC04410167-DE

A2075 AX-RC00840437-DE A4075 AX-RC03350219-DE

A2110 AX-RC00590614-DE A4110 AX-RC02330307-DE

A2150 AX-RC00440859-DE A4150 AX-RC01750430-DE

A2185 / A2220 AX-RC00301275-DE A4185 / A4220 AX-RC01200644-DE

A2300 AX-RC00231662-DE A4300 AX-RC00920797-DE

A2370 AX-RC00192015-DE A4370 AX-RC00741042-DE

A2450 AX-RC00162500-DE A4450 AX-RC00611236-DE

A2550 AX-RC00133057-DE A4550 AX-RC00501529-DE

Model Diameter Description

AX-FER2102-RE 21 For 2.2 KW motors or below

AX-FER2515-RE 25 For 15 KW motors or below

AX-FER5045-RE 50 For 45 KW motors or below

AX-FER6055-RE 60 For 55 KW motors or above

Voltage

200V 400V

Model RX-@ Reference Model RX-@ Reference

A2004 AX-RAO11500026-DE

A4004 / A4007 / A4015 AX-RAO16300038-DEA2007 AX-RAO07600042-DE

A2015 AX-RAO04100075-DE

A2022 AX-RAO03000105-DE A4022 AX-RAO11800053-DE

A2037 AX-RAO01830160-DE A4040 AX-RAO07300080-DE

A2055 AX-RAO01150220-DE A4055 AX-RAO04600110-DE

A2075 AX-RAO00950320-DE A4075 AX-RAO03600160-DE

A2110 AX-RAO00630430-DE A4110 AX-RAO02500220-DE

A2150 AX-RAO00490640-DE A4150 AX-RAO02000320-DE

21

B Accessories

C Option boards

D Braking unit, braking resistor unit

Types Model Description Functions

Digital

operator

3G3AX-OP05 LCD remote operator 2 Line LCD remote operator with copy function, cable length max. 3m.

3G3AX-CAJOP300-EE Remote operator cable 3 meters cable for connecting remote operator

Accessories

3G3AX-PCACN2 USB converter / USB cable RJ45 to USB connection cable

Types Model Description Functions

Encoder

Feedback

3G3AX-PG PG speed controller option card

Phase A,B and Z pulse (differential pulse) inputs (RS-422)

Pulse train position command input (RS-422)

Pulse monitor output (RS-422)

PG frequency range: 100 kHz max

Communication

option board

SJ-DN DeviceNet option card Used for running or stopping the inverter or give frequency reference through DeviceNet

SJ-PB Profibus option card Used for running or stopping the inverter or give frequency reference through Profibus

Digital

input

SJ-DG Digital input option card Allows to set frequency reference from a digital selection

Inverter Braking resistor unit

Voltage

Max.

motor

kW

Inverter

RX@

Braking Unit

AX-BCR@

Connectable

min.

resistance Ω

Inverter mounted type (3 %ED,

10 sec max)

Braking

torque %

External resistor 10%ED

10 sec max for built-in

5 sec max for Braking Unit

Braking

torque %

3-phase Type AX- Resist Ω Type AX- Resist Ω

200 V

(single-/

three-

phase)

0.55 2004

Built-in

50 REM00K1200-IE 200

180 REM00K1200-IE 200 180

1.1 2007 100 REM00K2070-IE 70 200

1.5 2015

35

REM00K2070-IE 70

140 REM00K4075-IE 75 130

2.2 2022 90 REM00K4035-IE 35 180

4.0 2037 REM00K4075-IE 75 50 REM00K6035-IE 35 100

5.5 2055 16
REM00K4035-IE 35

75 REM00K9020-IE 20 150

7.5 2075

10

55 REM01K9017-IE 17 110

11.0 2110 REM00K6035-IE 35 40 REM02K1017-IE 17 75

15.0 2150

7.5

REM00K9017-IE 17 55 REM03K5010-IE 10 95

18.5 2185
REM03K5010-IE 10

75

REM19K0008-IE 8

95

22.0 2220 5 65 80

30.0 2300

2035090-TE 4 REM19K0006-IE

680

37.0 2370 660

45.0 2450

2070130-TE 2.8 2 x REM19K0006-IE

3105

55.0 2550 385

400 V

(three-

phase)

0.55 4004

Built-in

100

REM00K1400-IE 400

200

REM00K1400-IE 400

200

1.1 4007 200 200

1.5 4015 REM00K1200-IE 200 190 REM00K2200-IE 200 190

2.2 4022 REM00K2200-IE 200 130 REM00K5120-IE 120 200

4.0 4040
70

REM00K2120-IE 120 120 REM00K6100-IE 100 140

5.5 4055

REM00K4075-IE 75

140 REM00K9070-IE 70 150

7.5 4075
35

100 REM01K9070-IE 70 110

11.0 4110 REM00K6100-IE 100 50 REM02K1070-IE 70 75

15.0 4150
24

REM00K9070-IE 70 55 REM03K5035-IE 35 110

18.5 4185

REM03K5035-IE 35

90

REM19K0030-IE 30

100

22.0 4220 20 75 85

30.0 4300 4015045-TE 16 REM19K0020-IE 20 95

37.0 4370

4017068-TE 11 REM38K0012-IE 15

125

45.0 4450 100

55.0 4550

4035090-TE 8.5

2 x REM19K0020-IE 10 100

75.0 4750 3 x REM19K0030-IE 10 75

90.0 4900 4070130-TE 5.5 2 x REM38K0012-IE 6 105

110.0 411K
4090240-TE 3.2 3 x REM38K0012-IE 4

125

132.0 413K 105

22 Frequency inverters

E Computer software

Types Model Description Installation

Software

CX-drive Computer software Configuration and monitoring software tool

CX-One Computer software Configuration and monitoring software tool

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. I116E-EN-01A

KPP_RX_EN_INT01A

Austria

Tel: [phone]
www.industrial.omron.at

Belgium

Tel: [phone]
www.industrial.omron.be

Czech Republic

Tel: [phone]
www.industrial.omron.cz

Denmark

Tel: [phone]
www.industrial.omron.dk

Finland

Tel: [phone]
www.industrial.omron.fi

France

Tel: [phone]
www.industrial.omron.fr

Germany

Tel: [phone]
www.industrial.omron.de

Hungary

Tel: [phone]
www.industrial.omron.hu

Italy

Tel: [phone]
www.industrial.omron.it

Netherlands

Tel: [phone]
www.industrial.omron.nl

Norway

Tel: [phone]
www.industrial.omron.no

Poland

Tel: [phone]
www.industrial.omron.pl

Portugal

Tel: [phone]
www.industrial.omron.pt

Russia

Tel: [phone]
www.industrial.omron.ru

South-Africa

Tel: [phone]
www.industrial.omron.co.za

Spain

Tel: [phone]
www.industrial.omron.es

Sweden

Tel: [phone]
www.industrial.omron.se

Switzerland

Tel: [phone]
www.industrial.omron.ch

Turkey

Tel: [phone]
www.industrial.omron.com.tr

United Kingdom

Tel: [phone]
www.industrial.omron.co.uk

More Omron representatives

www.industrial.omron.eu

Although we strive for perfection, Omron Europe BV and/or its subsidiary and affiliated companies do not warrant
or make any representations regarding the correctness or completeness of the information described in this document.
We reserve the right to make any changes at any time without prior notice.

OMRON EUROPE B.V.

Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: [phone] Fax: [phone] www.industrial.omron.eu

Automation Systems

• Programmable logic controllers (PLC) • Human machine interfaces (HMI) • Remote I/O

• Industrial PC’s • Software

Motion & Drives

• Motion controllers • Servo systems • Inverters

Control Components

• Temperature controllers • Power supplies • Timers • Counters • Programmable relays

• Digital panel indicators • Electromechanical relays • Monitoring products • Solid-state relays

• Limit switches • Pushbutton switches • Low voltage switch gear

Sensing & Safety

• Photoelectric sensors • Inductive sensors • Capacitive & pressure sensors

• Cable connectors • Displacement & width-measuring sensors • Vision systems

• Safety networks • Safety sensors • Safety units/relay units • Safety door/guard lock switches