OMRON H3YN User Manual

Solid-state Timer H3YN

ac ou g/ o

Miniature Timer with Multiple Time Ranges and Multiple Operating Modes

Minimizes stock. Pin

configuration compatible with

Standard multiple operating modes and multiple time ranges.

Conforms and

to VDE 0435/P2021 and approved by

CSA.

Conforms to EMC standards.

Ordering Information

Supply

voltage

24, 100 to 120, 200 to 230 V 12, 24, 48, 100 to 1 125 VDC

24 VDC 4PDT (Twin contact) H3YN-4-Z H3YN-41-Z

Note:

Specify both the model number and supply voltage when ordering.

10,

Example: H3YN-2

AC;

24 V

MY Power Relay

.

UL

T

ime-limit contact

DPDT H3YN-2 H3YN-21 4PDT H3YN-4 H3YN-41

AC

Supply voltage

Short-time range model

(0.1 s to 10 min)

Long-time range model

(0.1 min to 10 h)

RC

Model Number Legend

H3YN-jj-j

12 3

1. Output

2: DPDT 4: 4PDT

2. Time

Range

None:

Short-time range (0.1 s to 10 min)

1:

Long-time range (0.1 min to 10 hrs)

Accessories (Order Separately)

Connecting

H3YN-2/-21

H3YN-4/-41 H3YN-4-Z/-41-Z

Socket

Timer

T

rack mounting/Front Connecting Socket

PYF08A, PYF08A-N, PYF08A-E

PYF14A, PYF14A-N, PYF14A-E

3.

Contact T

None: Z: T

Solder terminal

PY08 PY08QN(2) PY08-02

PY14 PY14QN(2) PY14-02

ype

Single contact

win contact

Back Connecting Socket

W

ire-wrap terminal PC terminal

1

H3YN

Hold-down Clips

Model

Y92H-3

Y92H-4

Applicable Socket

PYF08A, PYF08A-N, PYF08A-E PYF14A, PYF14A-N, PYF14A-E

PY08, PY08QN(2), PY08-02 PY14, PY14QN(2), PY14-02

Specifications

Ratings

Item H3YN-2/-4/-4-Z H3YN-21/-41/-41-Z

Time

ranges

Rated supply voltage

Pin type Operating mode Operating voltage range

Reset voltage Power consumption

Control outputs DPDT:

Note: 1.

Single-phase, full-wave-rectified power supplies can be used.

2. When

3.

using the H3YN continuously

of

the rated supply voltages (supply 95% to 1

Set the reset voltage as follows to ensure proper resetting.

100 to 120 V 200 to 230 V 100 to 1

AC: AC:

10 VDC: 10 VDC max.

0.1 s to 10 min (1 s, 10 s, 1 min, or 10 min max. selectable)

24, 100 to 120, 200 to 230 V 12, 24, 48, 100 to 1

Plug-in ON-delay, interval, flicker OFF start, or flicker ON start (selectable with DIP switch) 85% to 1

(see note 2) 10% min. of rated supply voltage (see note 3) 24 V

100 to 120 V 200 to 230 V 12 VDC: Relay ON: 24 VDC: Relay ON: 48 VDC: Relay ON: 100 to 1 125 VDC:

4PDT:

10 V

AC max.

20 V

AC max.

H3YN

0.1 min to 10 h (1 min, 10 min, 1 h, or 10 h max. selectable)

10, 125 VDC (see note 1)

10% of rated supply voltage (12 VDC: 90% to 110% of rated supply voltage)

AC: Relay ON:

Relay OFF:

AC: Relay ON:

Relay OFF:

AC: Relay ON:

Relay OFF: Relay OFF: Relay OFF: Relay OFF:

10 VDC: Relay ON:

Relay OFF: Relay ON: Relay OFF:

5 A at 250 V 3 A at 250 V

in any place where the ambient temperature is in a range of 45°C to 50°C, supply 90% to 1

10% with 12 VDC type).

AC (50/60 Hz)

1.5 V

A (1.1 W) (at 24 V

0.2 V

A (0.1 W) (at 24 V

1.5 V

A (1.3 W) (at 120 V

0.6 V

A (0.6 W) (at 120 V

1.8 V

A (1.5 W) (at 230 V

1.2 V

A (0.9 W) (at 230 V

0.9 W (at 12 VDC)

0.07 W (at 12 VDC)

0.9 W (at 24 VDC)

0.07 W (at 24 VDC)

1.0 W (at 48 VDC)

0.2 W (at 48 VDC)

1.3 W (at 1

0.3 W (at 1

1.3 W (at 125 VDC)

0.3 W (at 125 VDC)

AC, resistive load (cosφ AC, resistive load (cosφ

10 VDC) 10 VDC)

AC, 60 Hz) AC, 60 Hz)

AC, 60 Hz) AC, 60 Hz) AC, 60 Hz) AC, 60 Hz)

= 1) = 1)

10%

2

H3YN

Characteristics

Item H3YN-2/-21/-4/-41

Accuracy Setting error ±10%± Reset time Influence of voltage Influence of temperature Insulation resistance Dielectric strength

V

ibration resistance

Shock resistance

Ambient temperature

Ambient humidity Life expectancy

Impulse withstand voltage

Noise immunity Static immunity

Enclosure rating Weight EMC Emission Enclosure: EN55011 Group 1 class A

Approved standards

of operating time

±

1% FS max. (1 s range:

50 ms FS max.

Min. power-opening time: 0.1 s max. (including halfway reset)

±

2% FS max.

±

2% FS max. 100 MΩ min. (at 500 VDC) 2,000 V

AC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-current-carrying metal parts) (see note) 2,000 V

AC, 50/60 Hz for 1 min (between operating power circuit and control output) 2,000 V

AC, 50/60 Hz for 1 min (between dif 1,500 V

AC, 50/60 Hz for 1 min (between dif 1,000 V

AC, 50/60 Hz for 1 min (between non-continuous contacts) Destruction:

Malfunction: Destruction:

Malfunction: Operating: –10°

Storage: –25° Operating: Mechanical:

Electrical: DPDT:

Between power terminals: 3 kV for 100 to 120 VAC, 200 to 230 VAC, 100 to 1 1 kV for 12 VDC, 24 VDC, 48 VDC, 24 V

Between exposed non-current-carrying metal parts:

4.5 kV for 100 to 120 VAC, 200 to 230 VAC, 100 to 1

1.5 kV for 12 VDC, 24 VDC, 48 VDC, 24 V

±

1.5 kV

Destruction: 8 kV Malfunction: 4 kV

IP40 Approx. 50 g

Emission AC Mains: Immunity ESD:

Immunity RF-interference:

Immunity Conducted Disturbance: Immunity Burst:

UL508, CSA22.2 No. 14 Conforms to VDE0435/P2021, VDE01 Conforms to EN50081-2, EN50082-2

10 to 55 Hz, 0.75-mm single amplitude 10 to 55 Hz, 0.5-mm single amplitude

1,000 m/s2 (approx. 100G) 100 m/s2 (approx. 10G)

35% to 85% 10,000,000 operations min. (under no load at 1,800 operations/h)

500,000 operations min. (5 A at 250 V 4PDT: 200,000 operations min. (H3YN-4-Z/-41-Z: 100,000 operations min.) (3 A at 250 V

, square-wave noise by noise simulator (pulse width: 100 ns/1

±1%±

10 ms max.)

ferent pole contacts; 2-pole model) ferent pole contacts; 4-pole model)

C to 50°C (with no icing) C to 65°C (with no icing)

AC, resistive load at 1,800 operations/h)

AC

EN55011 Group 1 class A EN61000-4-2:

ENV50140:

ENV50141: EN61000-4-4:

10 (for in-panel use)

AC, resistive load at 1,800 operations/h)

10 VDC, 125 VDC

4 kV contact discharge (level 2) 8 kV air discharge (level 3) 10 V/m (amplitude modulated, 80 MHz to 1 GHz) (level 3) 10 V/m (pulse modulated, 900 MHz) 10 V (0.15 to 80 MHz) (level 3) 2 kV power-line (level 3) 2 kV I/O signal-line (level 4)

H3YN

µs, 1-ns rise)

Note: T

erminal screw sections are excluded.

3

H3YN

Engineering Data

Electrical Life Expectancy (Reference Value)

H3YN-2/-21

3

5,000

250 VAC, cosφ 24 VDC, cosφ

= 1

H3YN

3

5,000

250 VAC, cosφ 24 VDC, L/R = 7 ms

= 0.4

1,000

500

200

Switching operations (x 10 )

Reference:

H3YN-4/-41

3

5,000

1,000

500

200

Switching operations (x 10 )

Reference:

1,000

500

200

Switching operations (x 10 )

Load current (A)

A maximum current of 0.6 A can be switched at 125 VDC (cosφ = 1). Maximum current of 0.2 A can be switched if L/R is 7 ms. In both cases, a life of 100,000 operations can be expected. The minimum applicable load is 1 mA at 5 VDC (P reference value).

250 VAC, cosφ 24 VDC, cosφ

= 1

3

5,000

1,000

500

200

250 VAC, cosφ 24 VDC, L/R = 7 ms

Switching operations (x 10 )

Load current (A)

A maximum current of 0.5 A can be switched at 125 VDC (cosφ = 1). Maximum current of 0.2 A can be switched if L/R is 7 ms. In both cases, a life of 100,000 operations can be expected. The minimum applicable load is 1 mA at 1 VDC (P reference value).

= 0.4

H3YN-4-Z/-41-Z

3

5,000

1,000

500

24 VDC, re-

100

sistive load

60

Switching operations (x 10 )

Reference:

250 VAC, resistive load

Load current (A)

A maximum current of 0.5 A can be switched at 125 VDC (cosφ = 1). Maximum current of 0.2 A can be switched if L/R is 7 ms. In both cases, a life of 100,000 operations can be expected. The minimum applicable load is 0.1 mA at 1 VDC (P reference value).

4

H3YN

Nomenclature

H3YN

Output Indicator (Orange)

(Lit: Output ON)

Main Dial

Set the desired time according to time range selectable by DIP switch.

Operation

Timing Chart

Operating

ON-delay

Power

Output

Interval

Power

Output

Flicker OFF-start

Power

Output

Flicker ON-start

Power

Output

mode

Power (13-14) Time limit contact

NC (9-1, 12-4) Time limit contact

NO (9-5, 12-8) Run/Power indicator

(PW) Output indicator

(UP)

Power (13-14) Time limit contact

NC (9-1, 12-4) Time limit contact

NO (9-5, 12-8) Run/Power indica-

tor (PW) Output indicator

(UP)

Power (13-14) Time limit contact

NC (9-1, 12-4) Time limit contact

NO (9-5, 12-8) Run/Power indicator

(PW) Output indicator

(UP)

Power (13-14) Time limit contact

NC (9-1, 12-4) Time limit contact

NO (9-5, 12-8) Run/Power indica-

tor (PW) Output indicator

(UP)

Run/Power

Indicator (Green)

(Lit: Power ON)

T

iming chart

H3YN-2/-21 H3YN-4/-41

Power (13-14) Time limit contact

NC (9-1, 10-2, 11-3, 12-4)

Time limit contact NO (9-5, 10-6, 11-7, 12-8)

Run/Power indicator (PW)

Output indicator (UP)

Power (13-14) Time limit contact

NC (9-1, 10-2, 11-3, 12-4) Time limit contact NO (9-5, 10-6, 11-7, 12-8)

Run/Power indicator (PW)

Output indicator (UP)

Power (13-14) Time limit contact

NC (9-1, 10-2, 11-3, 12-4)

Time limit contact NO (9-5, 10-6, 11-7, 12-8)

Run/Power indicator (PW)

Output indicator (UP)

Power (13-14) Time limit contact

NC (9-1, 10-2, 11-3, 12-4)

Time limit contact NO (9-5, 10-6, 11-7, 12-8)

Run/Power indicator (PW)

Output indicator (UP)

Note: t: Set

Rt:

Reset time

time

5

H3YN

H3YN-4-Z

H3YN-41-Z

H3YN

DIP Switch Settings

The 1-s range and ON-delay mode for H3YN-2/-4/-4-Z, the 1-min range and ON-delay mode for H3YN-21/-41/-41-Z are factory-set before shipping.

Time Ranges

Model Time

H3YN-2, H3YN-4

-

1 s

10 s

range

T

ime setting

range

0.1 to 1 s

1 to 10 s

Setting Factory-set

Yes

No

1 min 0.1 to 1 min

10 min 1 to 10 min

H3YN-21, H3YN-41

-

Note:

1 min 0.1 to 1 min

10 min 1 to 10 min

1 h 0.1 to 1 h

10 h 1 to 10 h

The top two DIP switch pins are used to select the time ranges.

Operating Modes

Operating

ON-delay Yes

Interval No

Flicker OFF-start No

Flicker ON-start No

mode

Setting Factory-set

No

Yes

No

Note:

The bottom two DIP switch pins are used to select the operating mode.

6

H3YN

Dimensions

Note:

All units are in millimeters unless otherwise indicated.

Timers

H3YN-2/-21 Front Mounting

Eight, 3 x 1.2 elliptic holes

H3YN

28 max.

(63)

H3YN-4/-41 Front Mounting H3YN-4-Z/-41-Z

Mounting Height

PYF08A/PYF08A-N/PYF08A-E (PYF14A/PYF14A-N/PYF14A-E (see

note))

H3YN Series

Fourteen,

6.4

3

21.5 max

× 1.2 elliptic holes

21.5 max

PY08 (PY14 (see note))

H3YN Series

28 max.

PY08QN (PY14QN (see note))

H3YN Series

PYF08A (PYF14A)

PY08 (PY14)

Note:

Models in parentheses are Sockets connecting to the H3YN-4/-4-Z.

PY08QN (PY14QN)

7

H3YN

Accessories (Order Separately)

Connecting Sockets

Use

the PYFjA, PYj, PYj-02, or PYjQN(2) to mount the H3YN. When ordering any one of these Sockets, replace “j” with “08” or “14.”

Track Mounting/Front Connecting Sockets PYF08A

5

Two, 4.2 × mounting holes

max.

72

6

Eight,

M3

×

8 sems

3.4

35.4

Terminal (T

op V

iew)

Arrangement

Mounting

Two, 4.5 dia. M4 or M3

Holes

59±0.3

90.5

H3YN Series

H3YN

86.6

PYF-14A

Two, 4.2 ×

5

mounting holes

72 max.

PYF-08A-N

23 max.

22 max.

4

42

8

44

6

29.5 max.

1

12

5

14

66.5 max.

Fourteen, 8 sems

16.5

M3

30 max.

×

16.5 30 max.

4

6

3.4

Terminal (T

op V

iew)

Arrangement

35.4

15±0.2

Mounting Holes

Two, 4.5 dia. M4 or M3

59±0.3

PYFjA

4

6

Terminal

Arrangement

22±0.2

Mounting Holes (for Surface Mounting)

424412

4 1

14

8 5

3.2 dia.

19.8

3.6 dia.

PYF-14A-N

8

PYF-08A-N

41

12

A2

14

4

42332222112

6245

8447

34

PYF-14A-N

211011

411231

11

A214A2

14

29.5

max.

11

9

A113A2

14

9

A1 13

66.5 max.

30 max.

Terminal

12 9

41 11

13

14 14

A2 A2 A1

Arrangement

42 32 22 12

4 3 2 1

44 34 24 14

8 7 6 5

12 11 10 9

41 31 21 11

14 14

A2 A2 A1

13

Mounting Holes (for Surface Mounting)

Two, 3.5 dia.

20.8

H3YN

PYF08A-E

Two, 4.2 × mounting holes

72 max.

PYF14A-E

Two, 4.2 × mounting holes

72 max.

5

23 max.

29.5 max.

Eight,

M3

8 sems

Eight, M3 × 8 sems

×

31

max.

31

max.

(Top View)

Two, 4.5 dia. M4 or M3

Back Connecting Sockets PY08, PY14

Eight, 3× 1.2 dia. holes only for PY08 (Fourteen, 3 × 1.2 dia. holes)

2.7 7.7 20 max.

0.3

24 max.

2.6

25.5 max.

29.5 max.

PY08QN, PY14QN PY08QN(2), PY14QN(2)

24 max.

2.7

25 max. *

(See note)

**

41.5 max. (see note)

22 max.

29.5 max.

1

x 1

Note: With PYjQN(2)(-3), dimension *

read

20 max. and dimension ** 36.5 max.

PY08-02, PY14-02

22

max.

2.7

0.3

4.3

16.5 max.

25.5 max.

29.5 max.

2

should

Terminal

Arrangement

(Bottom View)

PY08 PY14

T

erminal Arrangement

(Bottom View)

PY08QN PY08QN(2)

Terminal

PY14QN PY14QN(2)

Arrangement

(Bottom View)

PY08j-02 PY14j-02

Panel Cutout

21.4

+0.2

25.8

0

+0.2 0

H3YN Series

59.3

PYj, PYj-02, PYjQN(2)

9

H3YN

Socket Mounting Plates

The

PYP-1 is a Socket Mounting Plate for a single Socket and the PYP-18 is a Socket Mounting Plate for 18 Sockets. The PYP-18 can be cut

appropriately

according to the number of Sockets to be used.

H3YN

PYP-1

Two, 3.4-dia. holes

28

t = 1.6

Square hole

49

PYP-18

21.6

4.5

492

17 x 27.4 = 465.8±0.6

27.4±0.15

3.4

72, elliptic holes

13.1

42±0.1

t = 1.6

49

Hold-down Clips

The

Hold-down Clip makes it possible to mount the H3YN securely and prevent the H3YN from falling out due to vibration or shock.

Y92H-3 Y92H-4

Y92H-3 for PYFj

A Socket

max.

53

Y92H-4 for PYj

Socket

30.5

24.5

9R5

2.5

20

(84°)

4.5

1.2

4.5

33.7

10

H3YN

Installation

Connection

H3YN-2/-21 H3YN-4/-41

DIN

Indication

H3YN-4-Z/-41-Z

H3YN

DIN Indication

Timer circuit

UP PW

Timer circuit

UP PW

Pulse Operation

A

pulse output for a certain period can be obtained with a random external input signal.

Use the H3YN in interval mode as shown in the following timing charts.

H3YN-2/-21

Power (9-14) External short circuit

H3YN-4/-41 H3YN-4-Z/-41-Z

Timer circuit

External input

(5-13) External input

(9-13) Time limit contact

NO (12-8) Time limit contact

NC (12-4) Run/Power indicator

(PW) Output indicator (UP)

50 ms min.

Note: t:

Rt:

Set time Reset time

Timer circuit

External input

Caution

!

Be

careful when connecting wires.

Mode Terminals

Pulse operation

Operating mode; interval and all other modes

Power (9-14) External short circuit

(5-13) External input

(9-13) Time limit contact NO

(10-6, 11-7, 12-8) Time limit contact NC

(10-2, 11-3, 12-4) Run/Power indicator

(PW) Output indicator (UP)

50 ms min.

Note: t:

Rt:

Power supply between 9 and 14 Short-circuit between 5 and 13 Input signal between between 9 and 13

Power supply between 13 and 14

Set time Reset time

11

H3YN

Precautions

The

operating voltage will increase when using the H3YN continu ously in any place where the 45°C to 50°C. Supply 90% to 110% of the rated voltages (at 12 VDC:

Do (for temperature is high), otherwise the internal parts (aluminum electrolytic H3YN ommended

95% to 1

not leave the H3YN in time-up condition for a long period of

example, more than one month in any place where the

capacitor) may become damaged. Therefore, the use of the

with a relay as shown in the

10%).

to extend the service life of the H3YN.

ambient temperature is in a range of

time

ambient

following circuit diagram is rec

-

Do

not set to the minimum setting in the flicker modes, otherwise the

contact

may become damaged.

Be careful not to apply any voltage to the terminal screws on the back of the Timer. Mount the product so that the screws will not come

in contact with the panel or metal parts.

Do

not use the H3YN in places where there is excessive dust, corro

gas, or direct sunlight.

sive Do

-

not mount more than one H3YN closely together internal parts may become damaged. Make sure that there is a space

of 5 mm or more between any H3YN

to allow heat radiation.

er The

internal parts may become damaged if a supply voltage other

than the rated ones is imposed on the H3YN.

models next to each oth

H3YN

-

, otherwise the

-

H3YN MY Relay

The

H3YN must be

DIP

switch, otherwise the user

high

voltage and get an electric shock.

Do

not connect the H3YN as shown in the following circuit diagram

on

the right hand side, otherwise the H3YN’

from each other in polarity may become short-circuited.

ent

Correct Incorrect

Use

the following safety circuit when building a self-holding or selfresetting Relay,

circuit

in combination.

disconnected from the Socket when setting the

with the H3YN and an auxiliary relay

may touch a terminal imposed with a

s internal contacts dif

, such as an MY

: H3YN

Auxiliary relay: MY Relay

fer-

Precautions for VDE Conformance

The

H3YN as a built-in timer conforms to VDE 0435/P2021 provided

that

the following conditions are satisfied.

Handling

Do not touch the DIP switch while power is supplied to the H3YN. Before

dismounting the H3YN from the Socket, make sure that no

voltage is imposed on any terminal of the H3YN.

Wiring

power supply for the H3YN

The such

as a breaker approved by VDE.

Only

a load with basic isolation can be connected to the output con

The H3YN is a model with basic isolation. Therefore, the H3YN

tact. and the load will ensure reinforced isolation, thus meeting VDE standards.

Insulation

Output terminals next to each other on the H3YN-4, H3YN-41, H3YN-4Z,

requirement:

or H3YN-41-Z must have the same electric potential.

must be protected with equipment

Overvoltage category II, pollution degree 2 (with a clearance age distance of 2.5 mm at 240 V

of 1.5 mm and a creep

AC)

-

In the case of the above circuit, Therefore, if the circuit shown on page 11 will

be required.

the H3YN will be in pulse operation.

is used, no auxiliary relay

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To

convert millimeters into inches, multiply by 0.03937. T

o convert grams into ounces, multiply by 0.03527.

Cat. No. L089-E1-1A In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Supervisory Control Devices Division 28th Fl., Crystal T 1-2-27, Shiromi, Chuo-ku, Osaka 540-6028 Japan Phone: (81)6-949-6035 Fax: (81)6-949-6069

12

ower Bldg.,

Printed

in Japan

1298-1M (0296)

a

OMRON H3YN User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Specifications

Ratings

Engineering Data

Nomenclature

Operation

DIP Switch Settings

Dimensions

Installation

Precautions