omron g2rl DATASHEETS
A Power Relay with Various Models
■ High-sensitivity (250 mW) and High-capacity
(16 A) Models available.
■ Low profile: 15.7 mm max. in height
■ Conforms to VDE (EN61810-1), UL508 and
CSA22.2.
■ Meets EN60335-1 requirements for household
products.
■ Clearance and creepage distance: 10 mm/10 mm.
■ Tracking resistance: CTI>250
■ Coil Insulation system: Class F (UL1446)
RoHS Compliant
Ordering Information
G2RL PCB Relay
Classification Enclosure
General-purpose Flux protection G2RL-1A G2RL-1 G2RL-2A G2RL-2
High-capacity Flux protection G2RL-1A-E G2RL-1-E --- ---
High-sensitivity Flux protection G2RL-1A-H G2RL-1-H --- ---
Note: When ordering, add the rated coil voltage to the model number.
Example: G2RL-1A 12 VDC
ratings
Fully sealed G2RL-1A4 G2RL-14 G2RL-2A4 G2RL-24
Fully sealed G2RL-1A4-E G2RL-14-E --- ---
Rated coil voltage
SPST-NO SPDT DPST-NO DPDT
Contact form
Model Number Legend
G2RL-@@@-@
1 23 4
1. Nu mber of Poles
1: 1 pole
2: 2 poles
2. Co n tact Form
None:@PDT
A: @PST-NO
3. Enclosure Ratings
None:Flux protection
4: Fully sealed
4. Classification
None:General purpose
E: High capacity (1 pole)
H: High sensitivity (1 pole)
Specifications
■ Coils Ratings for General-purpose and High-capacity Models
Rated voltage 5 VDC 12 VDC 24 VDC 48 VDC
Rated current 80.0 mA 33.3 mA 16.7 mA 8.96 mA
Coil resistance 62.5
Must operate voltage 70% max. of the rated voltage
Must release voltage 10% min. of the rated voltage
Max. voltage 180% of rated voltage (at 23
Power consumption Approx. 400 mW Approx. 430 mW
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
Ω 360 Ω 1,440 Ω 5,358 Ω
°C)
1
■ Coils Ratings for High-sensitivity Models
Rated voltage 5 VDC 12 VDC 24 VDC
Rated current 50.0 mA 20.8 mA 10.42 mA
Coil resistance 100
Must operate voltage 75% max. of the rated voltage
Must release voltage 10% min. of the rated voltage
Max. voltage 180% of rated voltage (at 23
Power consumption Approx. 250 mW
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
Contact Ratings
■
Item General-purpose Models High-capacity Models High-sensitivity Models
Number of poles 1 pole 2 poles 1 pole 1 pole
Contact material Ag Alloy (Cd free)
Load Resistive load (cos
Rated load 12 A at 250 VAC
Rated carry current 12 A (See note.) 8 A (70
Max. switching voltage 440 VAC, 300 VDC
Max. switching current 12 A 8 A 16 A 10 A
Max. switching power 3,000 VA (4,000 VA) 2,000 VA 4,000 VA 2,500 VA
Note: Contact your OMRON representative for the ratings on fully sealed models.
Characteristics
■
Item General-purpose
Number of poles 1 pole 2 pole 1 pole
Contact resistance 100 m
Operate (set) time 15 ms max.
Release (reset) time 5 ms max.
Max. operating fre quency Mechanical:18,000 operation/hr
Insulation resistance 1,000 M
Dielectric strength 5,000 VAC, 1 min between coil and
Impulse withstand voltage 10 kV (1.2
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Shock resistance Destruction: 1,000 m/s
Endurance (Mechanical) 20,000,000 operations (at 18,000 operations/hr)
Ambient temperature Operating: –40
Ambient humidity 5% to 85%
Weight Approx. 12 g
Note: Values in the above table are the initial values.
Approved Standards
■
Ω 576 Ω 2,304 Ω
°C)
φ=1)
12 A at 24 VDC (See
note.)
(High-capacity) Models
Ω max.
Electrical:1,800 operation/hr at rated load
Ω min. (at 500 VDC)
contacts
1,000 VAC, 1 min between contacts of same polarity
×50 µs) between coil and contact
Malfunction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Malfunction: 100 m/s
Storage: –40
8 A at 250 VAC
8 A at 30 VDC (See note.)
°C)/5 A (85°C)
(See note.)
5,000 VAC, 1 min between coil and
contacts
2,500 VAC, 1 min between contacts
of different polarity
1,000 VAC, 1 min between contacts
of same polarity
2
(approx. 100 G)
2
(approx. 10 G)
°C to 85°C (with no icing)
°C to 85°C (with no icing)
General-purpose Models High-sensitivity Models
16 A at 250 VAC
16 A at 30 VDC (See note.)
16 A (See note.) 10 A (See note.)
5,000 VAC, 1 min between coil and
contacts
1,000 VAC, 1 min between contacts of same polarity
10 A at 250 VAC
10 A at 24 VDC
(See note.)
UL508 (File No. E41643)/CSA C22.2 (No. 14) (File No. LR31928)
Model Contact form Coil ratings Contact ratings
G2RL-1A SPST-NO 3 to 48 VDC 12 A at 250 VAC (General use)
G2RL-1 SPDT
G2RL-1A-E SPST-NO 16 A at 250 VAC (General use)
G2RL-1-E SPDT
G2RL-1A-H SPST-NO 5 to 24 VDC 10 A at 250 VAC (General use)
G2RL-1-H SPDT
G2RL-2A DPST-NO 3 to 48 VDC 8 A at 277 VAC (General use)
G2RL-2 DPDT
12 A at 24 VDC (Resistive)
16 A at 24 VDC (Resistive)
10 A at 24 VDC (Resistive)
8 A at 30 VDC (Resistive)
G2RLG2RL
2
Loading...