Omron F3UV DATASHEET
Ultraviolet power monitor/illumination monitor
F3UV
Monitoring output state of UV (ultraviolet
light)/illumination light source
F3UV
Features
Optical Fiber Type
Fiber Units
●UV Power Monitor ● During projection monitoring
Heat resistance applications
Can be used as ultraviolet power monitor/illumination monitor
Head can resist heat up to 300°C (using
F3UV-HM) Converts harmful ultraviolet
Monitors projected light through fiber unit.
light into visible light
Case is made of ozone-proof and heatproof stainless steel
(SUS303).
UV light
Visible light
Light receiving element in the
Amplifier does not deteriorates.
F32-300, F32-70 F32-300, F32-70
F3UV-XW11/41, F3UV-XA F3UV-XW11/41, F3UV-XA
Illumination light Illumination light
A-215F3UV
Waterproof applications
Head can resist heat up to 150°C
(using F3UV-HM) Converts harmful
ultraviolet light into visible light
UV light
Visible light
Light receiving element in the
Amplifier does not deteriorates.
(Fiber unit not required)
F3UV-XW11/41, F3UV-XA
Application
UV Cleaning: Detect liquid-crystal
glass inside a UV cleaning chamber.
Cleaning chamber
UV lamp or
UV spot light source
Liquid-crystal
board
F3UV-HM
Fiber head
F3UV-XW11
Dry Cleaning of Liquid
F32-300
Fiber
UV lamp
Crystal Glass
F3UV-A30
Roller
Liquid crystal
glass
Precision Parts Resin Hardening Process
F3UV-HM
F3UV-HM
UV lamp
UV resin
Spindle
motor
bearing
Dicing process
Adhesive tape
UV lamp
F3UV-A30
Chip
Ring
UV Print Drying
UV lamp
F3UV-HM
Sheet
Roller
F3UV-HM
Checking UV Light Deterioration in Food
Processing
UV Light
F3UV-A30
UV Light
Filling
machine
UV lamp
F3UV-A30
Film
A-216 Standard Photoelectric Sensors
Features
Optical Fiber Type
Amplifier Units
● F3UV-XW Series
Digital % display for easy visualization of
measured values
7-segment digital % display
Easy teaching scheme
Button teaching is possible for zero-point setting and sensitivity setting.
Output form can be selected.
Two outputs: current/voltage output + decision output
● F3UV-XA
Sensitivity control scheme
Fine adjustment possible with 8-revolution dial.
Verify output form with operation indicator
lamp
Illuminates at approximate range of 4 to 5 V
Built-in Amplifier Type
(Cannot be used as illumination
monitor)
About 1/10th the cost
The price is about 1/10th the price of a dedicated measuring
instrument
Protective Structure to Prevent UV Deterioration.
A zinc die-cast case and synthetic quartz glass for the light receiving
window.
Protective tubes and covers available as options.
(Option)
Quartz glass
Wavelength conversion element
UV light
Aperture
Total reflection
1-5V
Main circuit
Visible light
Photodiode
Monitor UV Light Output Status with an Operation Indicator.
(Lit at approx. 4 to 5 V.)
F3UV
With control for sensitivity adjustment
Filter Cover (reduced by 1/6.5) Available.
A-217F3UV
Ordering Information
Built-in Amplifier Type
Sensors
Shape Intensity range of incident light Output Model
Accessories (Sold Separately)
Shape Name Model
Optical Fiber Type
Sensors
Amplifier Unit
Shape Connection method Output Output form Model
Pre-wired
1 to 30 mW/cm
2
F3UV-A30
Analog voltage output (1 to 5 V)
0.2 to 3 mW/cm
2
F3UV-A03
Protective Tube (Protects the cord.) F39-CU1M
Protective Cover (Protects the display.) F39-HU2
1/6.5 Filtering Cover F39-HU1
Mounting Brackets F39-L9
Evaluation output
Answer-back output
Current/voltage analog out-
put
NPN output F3UV-XW11 *
PNP output F3UV-XW41
Analog voltage output --- F3UV-XA
* A model with 5 times higher sensitivity is also available.
Head Unit (can only be used as UV power monitor)
Shape
Wavelength range
of incident light
*1
200 to 370 nm
*3
Max.
temperature
*2
300°C
150°C
Model Remarks
F3UV-HM
F3UV-HT 5m
Includes two M8 nuts and one mounting
plate.
Waterproof and chemical-resistant Te-
flon cover
*4
For the mounting procedure, see
"Please use correctly".
F3UV-HT 10 m
For the incoming light power range,
please inquire separately.
*1. The fiber unit is required for connection to the amplifier unit.
*2. Use within the operating temperature range of the fiber unit you are using.
*3. Can be directly connected to the amplifier unit.
*4. Teflon is a registered trademark of the Dupon Company and the Mitsui Dupon Chemical Company for their fluoride resin.
Fiber Units
Compatible Amplifier
Units
F3UV-XW11
F3UV-XW41
F3UV-XA
*1. The values given are for a standard UV light source with a central wavelength of 360 nm, measured with a standard illumination meter (and for use in combination
with the specified Amplifier and Head Unit). The power range is one for which teaching to 100% is possible.
*2. For the fiber length, please inquire separately.
*3. Not required when using as an illumination monitor.
Compatible Head
Units
F3UV-HM
*3
Shape
*1
M4 screw
M4 screw
M4 screw
M4 screw
Max.
temperature
300°C
70°C F32-70
300°C
70°C F32-70
Intensity range of
incident light
*2
10 to 300 mW/cm
30 to 300 mW/cm
2
2
Model Quantity
F32-300
F32-300
1 pc.
Accessories (Order Separately)
Shape Name Model Quantity Applicable Fiber Units
Protective Tube
1m
(Protects the fiber.)
F39-FU1M 1 pc. F32-70
A-218 Standard Photoelectric Sensors
Rating/performance
Built-in Amplifier Type
Main Unit
Item Model F3UV-A30 F3UV-A0
Intensity range of
incident light
*1
Wavelength range
of incident light
1 to 30 mW/cm
200 to 370 nm
P indicator Green LED
Operation indicator
Orange LED (illuminates at an output of approximately
4 to 5 V)
Sensitivity adjuster One-turn adjuster
Supply voltage 12 to 24 VDC ±10%
Current consumption 15 mA max.
Response time
*3
Output
*2
300 ms max. 400 ms max.
1 to 5 V (offset voltage of 0.2 V or higher)
Connection impedance 100 k min.
Repetition precision ±2% F.S. max.
Temperature drift 0.2% of F.S./°C max.
Fluorescent light 1,000 lx
Ambient illuminance
*4
max.
Ambient temperature -10° to 70°C
Ambient humidity 35% to 85%
Ambient temperature -25° to 80°C
Insulation resistance 20 M min. at 500 VDC
Dielectric strength 1,000 VAC for 1 min.
Vibration resistance
10 to 150 Hz, half amplitude of 0.1 mm in 3 directions: X,
Y, and Z, 8 min x 10 sweeps each
Shock resistance 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions
Protective structure IEC Standard IP30
Connection method Pre-wired models (standard length: 2 m)
Weight (Packed state) 78 g
Case Zinc diecast
Material
Window: Synthetic quartz glass
Accessories Instruction manual
2
0.2 to 3 mW/cm
2
Fluorescent light 500 lx
max.
*1. Using a standard UV light source and UV illumina-
tion meter in a power range for which analog output
can be set to 5 V.
*2. The response time is the rise time of the output sig-
nal to 10 to 90%.
*3. An output voltage up to 6 V can be output. Adjust the
sensitivity so that the output is less than 5 V. The output is 0.2 to 1 V when there is no incident UV light.
*4. This value is the illumination at the receiver window
maintaining an offset voltage of 1 V max. with the fluorescent light.
F3UV
Accessories (Order Separately)
Protective Tube (Protects the cord.)
Model F39-CU1M
1m
Shape
Item
Head connector
Tube
Ambient temperature Operating/storage: -40 to +100°C (must use in operating temperature range of sensor)
Ambient humidity Operating: 35% to 85% Storage: 35% to 95%
Bending radius 24 ±5mm
Tensile strength Gap between head connector/end cap and tube: 2 Nm or less, tube: 2 Nm or less
Compression load Tube: 9.8 Nm (lateral pressure load)
Material
Head connector Brass nickel plating
End cap Brass nickel plating
Tube Stainless steel (SUS304)
Accessories M2 screws
End cap
A-219F3UV
Loading...