Omron E5ZE-8AQHD1TCB-V2, E5ZE-8ACAD1PB-V2, E5ZE-8AQHD1PB-V2, E5ZE-8ACAD1TCB-V2, E5ZE-8VQHD1TCB-V2 Datasheet

Multipoint Temperature Controller E5ZE-8@D1@B-V2 1

Multipoint Temperature Controller

E5ZE-8@D1@B-V2

Multipoint Temperature Controller Connects
to the Programmable Controller with Ease

• Conforms to De viceNet req uirements wit h remote I/O and FINS
message communications, thus connecting to a CompoBus/D
Master without prog rams f or remot e I/O commu nications an d to
OMRON’s Programmable Controller with ease for explicit mes­sage communicat ion s .

• High-speed inpu t sampling of only 0.2 s at the maxi mum of eigh t
temperature inputs.

Model Number Structure

■Model Number Legend

1. Number of Control Points

8: 8 channels

2. Control Method

A: Standard (heating or cooling)
V: Heating and cooling

3. Control Output (H e a ting Side)

Q: Voltage output (for driving SSR)
C: Current output

4. Heater Burnout and SSR Failure Detection (See note 1.)

H: Available
A: Not available

5. Communications Function

D1: DeviceNet

6. Input

TC: Thermocouple
P: Platinum resistance thermometer

7. Case

B: Provided (Models with case)

8. Version

V2: Supports explicit messages

Note: 1. Heater burnout and SSR failure detection are not available when the control output on the heating side is current output.

2. Refer to the List of Models for combinations of functions.

1 234

5

6

7

8

E5ZE-8@@@D1@B-V2

2 Multipoint Temperature Controller E5ZE-8@D1@B-V2

Ordering Information

■List of Models

Note: 1. Cooling control is possible by making a change in output operation.

2. Models without the heater burnout/SSR failure detection function are also available.

3. Cooling control output is an open collector output (NPN).

■Accessories (Order Separately)

Setting Display Unit

Note: Not all the functions of the E5ZE can be set, which should be

taken into consideration when designing the system. For de­tails, refer to the E5ZD-SDL Setting Display Unit Datasheet
(H061).

Current Transformers (CT)

Special Cables

Recommended Power Supplies

No. of control

points

Control method Control output Heater burnout and

SSR failure detection

Input type

Thermocouple Platinum resistance

thermometer

8 Standard

(see note 1)

Voltage Available (see note 2) E5ZE-8AQHD1TCB-V2 E5ZE-8AQHD1PB-V2
Current Not available E5ZE-8ACAD1TCB-V2 E5Z E -8ACAD1PB-V2

Heating and cooling Voltage Available (see note 2) E5ZE-8VQHD1TCB-V2 E5ZE-8VQHD1PB-V2

Current (see note 3) Not available E5ZE-8VCAD1TCB-V2 E5ZE-8VCAD1PB-V2

Connecting

model

Connecting

part

Power supply Model

RS-232C Connector 100 to 240 VAC E5ZD-SDL1

24 VDC

Hole diameter 5.8 mm 12.0 mm
Model E54-CT1 E54-CT3

Model
E5ZE-CBL200
ES100-CT021-202 (25-pin)
ES100-CT023-202 (9-pin)

Series
S82J
S82K

Multipoint Temperature Controller E5ZE-8@D1@B-V2 3

Specifications

■Ratings

Supply volt age 24 VDC
Operating voltage range 85% to 110% of rated supply voltage
Power cons um ption 15 W + 20% max. at rated supply voltage
Input Input type Thermocouple: K, J, R, S, T, E, B, N, L, U, W, PL-II

Platinum resistance thermometer: Pt100, JPt100

Input impedance Thermocouple: 1 M

Ω min.

Rated platinum resistance
thermometer current

1 mA

Control
outputs

Standard (Heating side) Voltage output (with short-circuit protecting function)

ON: 12

± 1.2 VDC

OFF: 0.5 VDC max.
Max. load current: 30 mA DC per point

Current output

Rated output range: 4 to 20 mA DC
Current output range: 0 to 22 mA DC

With an output value of 0%: 4

+0

/

–0.6

mA DC

With an output value of 100%: 20

+2

/–0 mA DC

Max. load resistance: 600

Ω per point

Cooling side Open collector output (NPN)

Max. applied voltage: 30 VDC
Max. load current: 50 mA DC per point
ON residual voltage: 2 VDC max.
OFF leakage current: 1 mA DC max.

Alarm outputs Temperature alarm: The total output of all control points (alarm 1 NPN open collector output and

alarm 2 NPN open collector output)

HB alarm (heater burnout detection): Total output of all control points (1-point NPN open collector

output)

HS alarm (SSR failure detection): Total output of all control points (1-point NPN open collector

output)

Temperature controller error output (memory, set value, or hardware error):

1-point NPN open collector output
Max. applied voltage: 30 VDC
Max. load current: 50 mA DC per point

No. of input control points 8 input and 8 control points
Setting method Via communication
Control modes ON/OFF control

Hybrid of advanced PID control and fuzzy control
Manual operation

Memory bank input No. of points: 8 for each control point

Designation method: Through communication or memory bank designation input

Memory bank designation inputs With contact signal input

ON short-circuit resistance: 1 k

Ω max.

OFF open resistance: 100 k

Ω min.

With no-contact signal input

ON residual voltage: 2 VDC max.
OFF leakage current: 1 mA DC max.