Omron E3F2-SUS DATASHEET

Cylindrical photoelectric sensor in M18 stainless steel housing

E3F2-SUS

The stainless steel housing provides enhanced detergent resistance and longer lifetime in demanding environments.

• Complete sensor portfolio in robust stainless steel housing

• IP67, IP69K for highest water resistance

• Enhanced detergent resistance (ECOLAB certified)

• High power LED to compensate for dirt and misalignment

Selection Guide

Sensing method Sensing

distance

Through-beam 7 m

Retro-reflective with M.S.R.

Diffuse-reflective 0.1 m (fixed,

Diffuse-reflective (background suppression)

*1.

Pre-wired connectors are available on request. Contact your OMRON representative.

*2.

Order reflector separately

*3.

Measured with E39-R1S

Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adapting the length of the cable

(e.g. E3F2-R4B4-S-E 5M). For other cable length please contact your OMRON sales representative.

0.1 to 4 m (adjustable)

wide beam)

0.3 m (adjustable)

0.1 m (fixed)

Connection method Order code

––2 m–

–  ––

––2 m–

–  ––

––2 m–

–  ––

––2 m–

–  ––

––2 m–

–  ––

PNP output NPN output

E3F2-7B4-S 2M E3F2-7C4-S 2M

E3F2-7B4-M1-S E3F2-7C4-M1-S

E3F2-R4B4-S-E 2M E3F2-R4C4-S-E 2M

E3F2-R4B4-M1-S-E E3F2-R4C4-M1-S-E

E3F2-DS10B4-S 2M E3F2-DS10C4-S 2M

E3F2-DS10B4-M1-S E3F2-DS10C4-M1-S

E3F2-DS30B4-S 2M E3F2-DS30C4-S 2M

E3F2-DS30B4-M1-S E3F2-DS30C4-M1-S

E3F2-LS10B4-S 2M E3F2-LS10C4-S 2M

E3F2-LS10B4-M1-S E3F2-LS10C4-M1-S

1E3F2-SUS

Accessories (Order separately)

Name Sensing distance (typical) Reflectors 4 m [100 mm] E39-R1S 60 x 40 mm

3 m [100 mm] E39-R48 60 x 40 mm, enhanced

5 m [100 mm] E39-R7 ∅ 84 mm 6 m [100 mm] E39-R8 100 x 100 mm 5 m [100 mm] E39-R40 80 x 80 mm

Tape Reflectors 0.7 m [150 mm] E39-RS1 35 x 10 mm

1.1 m [150 mm] E39-RS2 35 x 40 mm

1.4 m [150 mm] E39-RS3 80 x 70 mm Lens Cap E39-F31 Mounting Bracket Y92E-B18 screw mount

*1.

Values in parentheses indicate the minimum required distance between the sensor and reflector.

Note: For detailed information about Accessories, refer to the main chapter “Accessories” at the end of the document.

Model Remark

chemical resistance

Sensor I/O Connectors

Cord Shape Cable type Model Standard Straight 2 m Four-wire type,

5 m XS2F-D421-G80-A

M12 connector

L-shaped 2 m XS2F-D422-D80-A

5 m XS2F-D422-G80-A

Detergent resistant cable with SUS nuts

Straight 2 m Y92E-S12PVC4S2M-L

5 m Y92E-S12PVC4S5M-L

L-shaped 2 m Y92E-S12PVC4A2M-L

5 m Y92E-S12PVC4A5M-L

XS2F-D421-D80-A

2 Standard Photoelectric Sensors

Specifications

Ratings

Item E3F2-7# E3F2-R4#-# E3F2-DS10# E3F2-DS30# E3F2-LS10#4-# Sensing method Through-beam Retro-reflective Diffuse-reflective

Wide beam (fixed) Potentiometer

adjustment Power supply voltage 10 to 30 V DC Current consumption 50 mA max. 30 mA max. 25 mA max. 30 mA max. Sensing distance 7 m 0.1 to 4 m

(with E39-R1S)

Standard object Opaque:

11 mm dia. min.

Opaque: 56 mm dia. min.

0.1 m (5 x 5 cm white mat paper)

–

0.3 m

(10 x 10 cm white

mat paper)

Directional angle 3° to 20° 3° to 20° – Differential travel

– 20% max. 5% max

(hysteresis) Black/white error – 3% max Response time Operation and Re-

1 ms max 2.5 ms max. 1 ms max.

set:

2.5 ms max. Control output Transistor (open collector), load current: 100 mA max. (residual voltage: 2 V max.) Power reset time 50 ms 100 ms max. 50 ms 100 ms Ambient illumination Incandescent lamp:3000 lx max. / Sunlight:10000 lx max. Ambient temperature Operating: -25 to 55 °C / Storage: -30 to 70 °C (with no icing or condensation) Ambient humidity Operating: 35% to 85% / Storage: 35% to 95% (with no condensation) Insulation resistance 20 MΩ min. at 500 V DC between energized parts and case Dielectric strength 1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z) Shock resistance Destruction: 500 m/s Degree of protection

IEC 60529 IP67, IP69K after DIN 40050-9

Light source (wave length) Infrared LED

each direction (X, Y, Z)

Red LED (660 nm) Infrared LED (880 nm) Red LED (660 nm)

(950 nm)

Indicators Light

incident / power in-

Light incident (red) / stability (green)

Light incident / power indicator for light

source (red) dicator for light source (red)

Sensitivity adjustment Fixed Adjustable Fixed Adjustable Fixed Connection method 2 m, 5 m pre-wired cable (PVC, dia. 4 mm (18 / 0.12)) or M12-connector Operation mode Light-ON or Dark-ON selectable by wiring Weight

(approx.)

Pre-wired (2 m) 180 g 90 g

Connector 120 g 50 g Circuit protection Output short-circuit and power supply reverse polarity Material Lens PMMA

*1.

Housing Stainless steel

The IP69k test according to DIN 40 050 part 9 is intended to simulate high pressure/steam cleaning. During the test 14-16l/min water at 80°C is sprayed onto the sensor from different angles with 8000-10000kPa. The sensor may not suffer any damaging effects from high pressure water in appearance and functionality.

*2.

Material-specification for stainless steel housing case: 1.4305 (W.-No.), 303 (AISI), 2346 (SS). For other stainless steel materials please contact your OMRON sales representative.

Background suppression

0.1 m (10 x 10 cm white mat paper)

Output indicator (orange) / stability (green)

3E3F2-SUS

Engineering Data (Typical)

Operating Range (typical)

Through-beam Models E3F2-7#4-#

Diffuse-reflective Models E3F2-DS30#4-#

Sensitivity adjusted to maximum Sensitivity adjusted to 400 mm

–10

Distance Y (mm)

–20

Sensing distance adjustable between 0 and 550 mm

–30

–40

Object

100 200 300 400 500 6000

white paper

(100 x 100 mm)

Distance X (mm)

Retro-reflective Models E3F2-R4#4#-#

250

Typical sensing distance E39-RS3 E39-R1S

200

E39-R40 E39-R7

150

E39-R8

100

-50

Distance Y (mm)

- 100

- 150

- 200

- 250 01 23456 789

Reflector

Distance X (m)

Diffuse-reflective Models E3F2-DS10#4-# (wide-beam type)

–5

Distance Y (mm)

–10

–15

Object

20 40 60 80 100 1200

Distance X (mm)

white paper

(50 x 50 mm)

140

Excess Gain Ratio vs. Distance (typical)

Through-beam Models E3F2-7#4-#

100

Excess gain

0.1 2 4 6 8 10 120

Distance X (m)

Retro-reflective Models E3F2-R4#4#-#

100

Reflectors: E39-RS3 E39-R1S E39-R40 E39-R7

Excess Gain

0.1 024 6810

E39-R8

Distance X (m)

Diffuse-reflective Models E3F2-DS10#4-# (wide beam type)

100

Sensing object:

50 x 50 mm

Grey paper

Excess gain

(18% reflectivity)

0.1 20 40 60 80 100 1200

White paper (90% reflectivity)

Distance X (mm)

140

4 Standard Photoelectric Sensors

+ 8 hidden pages