Omron CX-POSITIO DATASHEET

WS02-NCTC1-E

CX-Position

Set, transfer, store, and print position control unit data and monitor operation online

Increase productivity in all position control tasks, from design and startup to system
maintenance.

Key Features

The CX-Position software simplifies every aspect of position control, from creating/editing the data used in Position
Control Units (NC Units) to communicating online and monitoring operation. The software is equipped with
functions that can improve productivity, such as automatically generating project data and reusing existing data.

Creating and managing data

Data can be created for various applications

The CX-Position enables data for multiple NC Units on up to 1,000 PLCs to
be handled as 1 project. Data is displayed in tree format and the data for an
NC Unit can be moved or copied (overwritten) between PLCs in the project
tree. This feature allows data to be edited and re-used in other PLCs or NC

Units.

●The CX-Position can read information from NC Units connected online
and automatically generate project data.

●Data created for a C200HW-NC@@@ using the SYSMAC-NCT can be
imported and used as data for the CS1W-NC@@@ or CJS1W-NC@@@.

NC Monitor

Display the NC units’ present positions, error codes, sequence
numbers, and I/O status.

The sequence numbers and present positions can be dis-played for up to 4
Units. In addition, the contents of the operating memory area and operating
data area can be monitored and the error log can be displayed.

System Configuration with CS1W-NC413/433

CX-Programmer

Creation and transfer
of ladder programs,
monitoring, file

NC Unit
(CS1W-NC413/433)

External inputs

CCW limit input
CW limit input
Origin input

Origin proximity input

Emergency stop input

Interrupt input

Interface power
supply (24 V)

Stepping motor

drivers

Stepping motorsorServo motors

CPU Unit
(CS1 Series)

Servomotor drivers

management, etc.

Power Supply Unit

Peripheral bus/Host Link

External inputs

Stepping motors Servo motors

CCW limit input
CW limit input
Origin input

Origin proximity input

Emergency stop input

Interrupt input

Interface power
supply (24 V)

or

Stepping motor

drivers

CX-Position

Creation and
transfer of data,
NC Unit
monitoring, file
management, etc.

Servomotor drivers

Software

Communications

Communicate with NC units through the network.

It is possible to communicate with NC Units through the Fins-Gateway.
Depending on the FinsGateway driver version, HostLink or Ethernet. can
be used to perform online operations (monitoring operation or
transferring/verifying parameters,sequences, etc.) with the NC Unit.

Specifications

Compatible
Position Control
Units:

Basic Functions

Created files

CS Series:CS1W-NC113/NC133/NC213/NC413/NC433
CJ Series: CJ1W-NC113/NC133/NC213/NC413/NC433

Create, edit, and print the Position Control Unit’s parameter
data,sequence data, speed data, acceleration/deceleration
data, dwell times, and zone data. Monitor the Position Control
Unit’s operating status.

CX-Position project files (*.nci)
Contents: Parameter data, sequence data, speed data,
acceleration/deceleration data, dwell times, and zone data

Operating Environment

CPU:

OS:

Pentium 100 MHz or faster CPU

Windows 95, 98, NT4.0, W2000 or XP

Compatible PLCs:

CS Series and CJ Series

289CX-Position

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. I26E-EN-01

In the interest of product improvement, specifications are subject to change without notice.

290 Software