Omron CX-ONE V1.1 - SETUP MANUAL 11-2005, CX-One 1.1, SYSMAC CXONE-AL**C-E Setup Manual

SETUP MANUAL

CX-One Ver. 1.1
FA Integrated Tool Package

SYSMAC
CXONE-AL

@@@@

C-E

Cat. No. W444-E1-02

CXONE-AL@@C-E
CX-One Ver. 1.1
FA Integrated Tool Package

Setup Manual

Revised November 2005

iv

v

Notice:

OMRON products are manufactured for use according to proper procedures by a qualified operator
and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed
the information provided with them. Failure to heed precautions can result in injury to people or dam­age to property.

!DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. Additionally, there may be severe property damage.

!WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury. Additionally, there may be severe property damage.

!Caution Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to
an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means
“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PLC” means Programmable Controller. “PC” is used, however, in some Program­ming Device displays to mean Programmable Controller.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of
information.

Note Indicates information of particular interest for efficient and convenient opera-

tion of the product.

1,2,3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

 OMRON, 2005

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, o

r

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission o

f

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con­stantly striving to improve its high-quality products, the information contained in this manual is subject to change without
notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility
for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.

vi

vii

TABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv

1 Intended Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

SECTION 1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1-1 Overview of CX-One. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1-2 Confirmation of CX-One Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1-3 Support Software in CX-One. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1-4 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

SECTION 2

Installation and Uninstallation . . . . . . . . . . . . . . . . . . . . . . . 11

2-1 Installing the CX-One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2-2 CX-One Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

viii

TABLE OF CONTENTS

ix

About this Manual:

This manual describes the installation and operation of the CX-One FA Integrated Tool Package and
includes the sections described below.

Please read this manual carefully and be sure you understand the information provided before
attempting to install or operate the CX-One. Be sure to read the precautions provided in the following
section.

Precautions provides general precautions for using the CX-One.

Section 1 provides an overview of the CX-One FA Integrated Tool Package, its contents, and system

requirements.

Section 2 describes how to install and uninstall the software provided in the CX-One.

!WARNING Failure to read and understand the information provided in this manual may result in per-

sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.

x

Version Upgrade Information:

The following have been changed in upgrading the CX-One from version 1.0 to version 1.1.

Item Ver. 1.0 Ver. 1.1

Hardware space required to install all
of the CX-One software

Approx. 1.6 GB Approx. 1.8 GB

Number of setup disks (CD-ROM) 2 disks 3 disks

Software installed
for the CX-One

CX-Programmer Ver. 6.0 Ver. 6.1

CX-Integrator Ver. 1.0 Ver. 1.1

CX-Simulator Ver. 1.5 Ver. 1.6

NS-Designer Ver. 6.2 CX-Designer Ver. 1.0

CX-Motion Ver. 2.2 Ver. 2.22

CX-Motion-NCF Ver. 1.2 Ver. 1.3

CX-Position Ver. 2.1 Ver. 2.2

CX-Thermo Ver. 2.0 Ver. 2.01

CX-Protocol Ver. 1.6 Ver. 1.61

CX-Process Tool Ver. 4.1 Ver. 5.0

CX-Server Ver. 2.3 Ver. 2.4

SwitchBox Utility Ver. 1.6 Ver. 1.61

New software added
to the CX-One

CX-Motion-MCH --- Ver. 1.0

Refer to 1-3-1 Support Soft-

ware in CX-One and Refer­ence Manuals for details.

CX-Drive --- Ver. 1.1

CX-FLnet --- Ver. 1.0

CX-Profibus --- Ver. 1.0

xi

Read and Understand this Manual

Please read and understand this manual before using the product. Please consult your OMRON
representative if you have any questions or comments.

Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a
period of one year (or other period if specified) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON­INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE
PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.

In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which
liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS
REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS
WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

xii

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the
combination of products in the customer's application or use of the products.

At the customer's request, OMRON will provide applicable third party certification documents identifying
ratings and limitations of use that apply to the products. This information by itself is not sufficient for a
complete determination of the suitability of the products in combination with the end product, machine,
system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not
intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses
listed may be suitable for the products:

• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or
uses not described in this manual.

• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical
equipment, amusement machines, vehicles, safety equipment, and installations subject to separate
industry or government regulations.

• Systems, machines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any
consequence thereof.

xiii

Disclaimers

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other
reasons.

It is our practice to change model numbers when published ratings or features are changed, or when
significant construction changes are made. However, some specifications of the products may be changed
without any notice. When in doubt, special model numbers may be assigned to fix or establish key
specifications for your application on your request. Please consult with your OMRON representative at any
time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when
tolerances are shown.

PERFORMANCE DATA

Performance data given in this manual is provided as a guide for the user in determining suitability and does
not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and
Limitations of Liability.

ERRORS AND OMISSIONS

The information in this manual has been carefully checked and is believed to be accurate; however, no
responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.

xiv

xv

PRECAUTIONS

This section provides general precautions for using the CX-One FA Integrated Tool Package.

The information contained in this section is important for the safe and reliable application of the CX-One FA
Integrated Tool Package. You must read this section and understand the information contained before attempting
to set up or operate the CX-One FA Integrated Tool Package.

1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

2 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

xvi

Intended Audience 1

1 Intended Audience

This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).

• Personnel in charge of installing FA systems.

• Personnel in charge of designing FA systems.

• Personnel in charge of managing FA systems and facilities.

2 Safety Precautions

!Caution When performing any of the following operations, always check the network

address and node address of the other node (PLC) and the node address and
unit number of the mounted Unit (PLC CPU Bus Unit or Special I/O Unit) or
the node address of the Component (DeviceNet Master/Slave or Compo­Way/F Slave), and be sure that these operations can be performed safely for
the current status of the node (Unit or Component):

• Transferring parameter or program data to the other node

• Changing the operating mode of the other node

Unexpected operation may result if parameter or program data is transferred
to the wrong node (DeviceNet Master/Slave or CompoWay/F Slave), the oper­ating mode of the wrong node is changed, or the other node is not in a suit­able status to receive the program or parameter data or the operating mode
change.

!Caution Particularly when changing the target PLC to any PLC other than the relay

PLC, check the node address and node number of the target PLC carefully
before executing the change.) Unexpected operation and injury may result if
the wrong PLC is set as the target PLC.

• Changing the operating mode

• Transferring or verifying user-set data link tables

• Transferring or verifying routing tables

• Performing I/O table operations (including transferring CPU Bus Unit or
Special I/O Unit parameters)

Note Operations performed from the CX-Integrator are performed for the target

PLC, which is not necessarily the same as the relay PLC.

!Caution When transferring parameters that have been created or edited on the com-

puter to actual Units (PLC CPU Bus Units or PLC Special I/O Units) or to
actual components (DeviceNet Masters/Slaves or CompoWay/F Slaves), or
when resetting Units mounted on other PLC nodes or components (DeviceNet
Masters/Slaves or CompoWay/F Slaves) connected via communications with
other PLC nodes, always check the identifying numbers of the actual Units or
Components (i.e., the unit numbers and unit addresses or node addresses)
before executing the transfer or reset. Unexpected operation and injury may
result if parameters are transferred to the wrong Unit or components, or the
wrong Unit or component is reset.

xvii

Safety Precautions 2

Observe the following precautions when using the CX-One.

• When saving or opening a project file, always confirm the location of the
folder and the file name before executing the save or open. The CX-One
automatically switches the folder when saving and opening.

• Before changing the operating mode, always confirm that doing so will not
adversely affect system operation.

• Always check the operation of programs and parameters sufficiently
before using them for actual system operation.

• Confirm that resetting CPU Bus Units, Special I/O Units, and DeviceNet
Master/Slave Units will not adversely affect system operation before
resetting these Units.

xviii

Safety Precautions 2

1

SECTION 1

Overview

This section provides an overview of the CX-One FA Integrated Tool Package, its contents, and system requirements.

1-1 Overview of CX-One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1-1-1 The CX-One FA Integrated Tool Package . . . . . . . . . . . . . . . . . . . . 2

1-1-2 CX-One Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1-2 Confirmation of CX-One Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . 3

1-2-1 Confirmation of CX-One Package Contents . . . . . . . . . . . . . . . . . . 3

1-2-2 User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1-3 Support Software in CX-One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1-3-1 Support Software in CX-One and Reference Manuals. . . . . . . . . . . 5

1-3-2 Starting Support Software in CX-One . . . . . . . . . . . . . . . . . . . . . . . 7

1-4 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1-4-1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1-4-2 Hard Disk Space Requirements for Support Software in CX-One. . 9

2

Overview of CX-One Section 1-1

1-1 Overview of CX-One

1-1-1 The CX-One FA Integrated Tool Package

The CX-One FA Integrated Tool Package integrates all of the Support Soft­ware for OMRON PLCs and Components. Although previously it was neces­sary to purchase, install, run, and connect online to the PLC separately for the
Support Software for each Unit, the CX-One now provides an integrated
development environment based on the CPS (Component and Network Pro­file Sheet) for each OMRON Unit or Component. If the CX-One is installed in
a single computer, an integrated operating environment can be used all the
way from setting OMRON PLC Units through system startup and monitoring
to greatly increase system setup efficiency.

1-1-2 CX-One Features

Integrated Software
Management for OMRON
PLCs and Components

• One computer with the CX-One installed provides the Support Software
required to handle any OMRON product.

• All of the Support Software can be installed with a single license.

• Files saved from the various Support Software can be centrally managed
in one location.

Support Software for CPU
Bus Units and Special I/O
Units can be started from
the I/O tables.

When Support Software is started from the I/O tables (i.e., the Unit Configura­tion Table registered in the PLC), PLC and Unit settings can be inherited so
that they do not have to be re-entered every time Support Software is started.

Component and Network
Profile Sheets (CPS)

• CPU Bus Units and Special I/O Units can be set without concern for
memory addresses and without relying on operation manuals. Parameter
names, selections, and setting ranges are automatically displayed.

• Online, settings for virtual Units on the computer can be compared to the
settings in the actual Units, with any differences displayed in orange in the
comparison results.

• The Unit configuration in I/O tables is displayed using Unit model num­bers.

• Model and unit version checks can be performed when transferring data
to actual Units.

• Device types on the network can be confirmed using Unit models.

Note Component and Network Profile Sheet (CPS) files contain CS/CJ-series Unit

definitions or Component definitions within the CX-One. CPS files are pro­vided in XML format. The CX-One uses CPS files to recognize CS/CJ-series
Units. Settings for CPU Bus Units and Special I/O Units are also created
based on CPS files.

3

Confirmation of CX-One Package Contents Section 1-2

1-2 Confirmation of CX-One Package Contents

1-2-1 Confirmation of CX-One Package Contents

CX-One Model Number and Contents

CX-One Contents The contents of CX-One are listed in the following table. Please confirm that

you have received everything.

CXONE-AL@@C-E CX-One FA Integrated Tool Package

Note PDF manuals are provided for each Unit.

Name Model Installable Support Software Other included data

CX-One FA Integrated
Tool Package
Ver. 1.1
(CX-One Ver. 1.1)

CXONE-AL@@C-E CX-Programmer Ver. 6.1 • OMRON Function Blocks (FB)

• Smart Active Parts (Smart Active Parts)

• CPS files

• Manual (PDF)

CX-Integrator Ver. 1.1

CX-Simulator Ver. 1.6

CX-Designer Ver. 1.0

CX-Motion Ver. 2.2

CX-Motion-NCF Ver. 1.3

CX-Motion-MCH Ver. 1.0

CX-Position Ver. 2.2

CX-Drive Ver. 1.1

CX-Protocol Ver. 1.6

CX-Process Tool Ver. 5.0

CX-Profibus Ver. 1.0

Faceplate Auto-Builder for NS Ver. 2.0

CX-Thermo Ver. 2.0

CX-FLnet Ver. 1.0

CX-Server Ver. 2.4

SwitchBox Utility Ver. 1.6

Installation Disks (CD-ROM) 3 disks

CX-One Introduction Guide (Cat. No. R135) Printed manuals

and PDF manuals
in the CD-ROM

CX-Programmer Introduction Guide (Cat. No. R132)

CX-Designer Introduction Guide (Cat. No. V089)

Function Block Introduction Guide (Cat. No. R133)

CX-One Setup Manual (Cat. No. W444) (this manual) PDF manuals in

the CD-ROM
(Only the main
manuals are
listed.)

CX-Programmer Operation Manual (Cat. No. W446)

CX-Programmer Operation Manual: Function Blocks (Cat. No. W447)

CX-Integrator Operation Manual (Cat. No. W445)

CX-Simulator Operation Manual (Cat. No. W366)

CX-Designer User’s Manual (Cat. No. V088)

CX-Motion-NCF Operation Manual (Cat. No. W436)

CX-Motion-MCH Operation Manual (Cat. No. W448)

CX-Position Operation Manual (Cat. No. W433)

CX-Drive Operation Manual (Cat. No. W453)

CX-Protocol Operation Manual (Cat. No. W344)

CX-Profibus Operation Manual (Cat. No. W05E-EN)

CX-Process Tool Software Operation Manual (Cat. No. W372)

Faceplate Auto-Builder for NS Operation Manual (Cat. No. W418)

Smart Function Blocks Reference Manual (Cat. No. W442)

Smart Active Parts Reference Manual (See note. )

CX-Thermo Operation Manual Online help only

Software License Agreement/User Registration Card 1

4

Confirmation of CX-One Package Contents Section 1-2

Note The license number required for installation is printed on the Software License

Agreement/User Registration Card. Place this card in a safe place and be
sure not to loose the license number.

1-2-2 User Registration

Always perform user registration before using the CX-One.

Online User Registration (Internet Connection Required)

Registering from the Online Registration Dialog Box

1,2,3... 1. The following Online Registration Dialog Box will be displayed after when

computer is restarted upon completion of CX-One installation.

2. Click the Register Button. A wizard will connect you to the OMRON CX­One website. (See note.)

Note If the Exit Button is clicked to cancel online registration, the Online

Registration Dialog Box will be displayed every time Support Soft­ware in CX-One is started.

3. Enter the information required for user registration according to the site
windows. Use the product key and license number given on the Software
License Agreement/User Registration Card provided with the CX-One.

4. After completion of registration, registration confirmation will be sent to the
email address input during the registration procedure.

Note The Online Registration Dialog Box will be displayed even if online registration

has already been completed. If this happen, select the Do not display this dia-
log again option and click the Exit Button. Also use this procedure in the fol­lowing cases.

• The Windows login name is different from the registered name.

• User registration was performed using the User Registration Postcard.

User Registration Card

Software License Agreement

The license number is
printed on the cover.

Model number, license number,
and number of licenses are
printed on the card.

CX-One Introduction Guide

FA Integrated Tool Package

5

Support Software in CX-One Section 1-3

Online Registration from
the CX-Programmer or
other Support Software in
CX-One

OMRON's CX-One website will be displayed if Help - Online Registration is
selected from the menu bar of CX-Programmer or other Support Software in
CX-One. Enter the information required for user registration according to the
site windows. Use the product key and license number given on the Software
License Agreement/User Registration Card provided with the CX-One.

Note Do not register more than once. For example, if you're returned the card, do

not register online.

Using the User
Registration Postcard

Enter the required information on the User Registration Postcard provided
with the CX-One and send the card.

Note Approximately two weeks will be required from the time the User Registration

Postcard is posted until confirmation of registration is returned to you. Down­loading OMRON Standard Libraries and other operations allowed only for reg­istered users will not be possible during this period.

1-3 Support Software in CX-One

1-3-1 Support Software in CX-One and Reference Manuals

The following tables lists the Support Software that can be installed from CX­One along with the startup methods and the reference manuals for each.

Support Software

in CX-One

Outline Startup method within

CX-One

Documentation

(PDF manuals provided

in CD-ROM)

CX-Programmer Application software to create and debug

programs for SYSMAC CS/CJ/CP-series,
C-series, and CVM1/C-series CPU Units.

Started from a PLC in the
CX-Integrator Network
Configuration Window.

CX-Programmer Opera­tion Manual (Cat. No.
W446)
CX-Programmer Opera­tion Manual: Function
Blocks (Cat. No. W447)

CX-Integrator Application software to build and set up FA

networks, such as Controller Link,
DeviceNet, and CompoWay/F networks.
The Routing Table Component and Data
Link Component can be started from here.
DeviceNet Configuration functionality is also
included.

Started by selecting

Tools - Network Set­tings from the CX-Pro-

grammer menu bar or
from a CPU Unit in the
CX-Programmer I/O
tables.

CX-Integrator Operation
Manual (Cat. No. W445)

Switch Box Utility Utility software that helps you to debug

PLCs. It helps you to monitor the I/O status
and to monitor/change present values
within the PLC you specify.

Started from the CX-Pro­grammer Tools Menu.

Online Help

CX-Protocol Application software to create protocols

(communications sequences) between
SYSMAC CS/CJ-series or C200HX/HG/HE
Serial Communications Boards/Units and
general-purpose external devices.

Started from a Serial
Communications Board
or Unit in the CX-Pro­grammer I/O tables.

CX-Protocol Operation
Manual (Cat. No. W344)

CX-Simulator Application software to simulate SYSMAC

CS/CJ/CP-series CPU Unit operation on
the computer to debug PLC programs with­out a CPU Unit.

--- CX-Simulator Operation
Manual (Cat. No. W366)

CX-Position Application software to create and monitor

data for SYSMAC CS/CJ-series Position
Control Units.

Started from a Position
Control Unit in the CX­Programmer I/O tables.

CX-Position Operation
Manual (Cat. No. W433)

CX-Motion-NCF Application software to monitor and set

parameters for SYSMAC CJ-series Posi­tion Control Units and Servo Drivers that
support MECHATROLINK-II communica­tions.

Started from an NCF
Position Control Unit in
the CX-Programmer I/O
tables.

CX-Motion-NCF Opera­tion Manual (Cat. No.
W436)

6

Support Software in CX-One Section 1-3

CX-Motion-MCH Application software to create data for SYS-

MAC CS/CJ-series MCH Units, create
motion programs, and perform monitoring.

Started from a Motion
Control (MCH) Unit in the
CX-Programmer I/O
tables.

CX-Motion-MCH Opera­tion Manual (Cat. No.
W448)

CX-Motion Application software to create data for SYS-

MAC CS/CJ-series, C200HX/HG/HE, and
CVM1/CV-series Motion Control Units, and
to create and monitor motion control pro­grams.

Started from a Motion
Control Unit in the CX­Programmer I/O tables.

---

CX-Drive Application software to set and control data

for Inverters and Servos.

Started from an Inverter
or Servo in the CX-Inte­grator Network Configu­ration Window.

CX-Drive Operation Man­ual (Cat. No. W453)

CX-Process Tool Application software to create and debug

function block programs for SYSMAC
CS/CJ-series Loop Controllers (Loop Con­trol Units/Boards, Process Control CPU
Units, and Loop Control CPU Units).

Started from a Loop Con­troller in the CX-Program­mer I/O tables.

CX-Process Tool Opera­tion Manual (Cat. No.
W372)

Faceplate Auto­Builder for NS

Application software that automatically out­puts screen data as project files for NS­series PTs from tag information in function
block programs created with the CX-Pro­cess Tool.

Started by selecting Exe-

cute - Create Tag File ­Start NSFP from the CX-

Process Tool menu bar
(starts automatically after
execution of the CSV tag
compiler).

Faceplate Auto-Builder
for NS Operation Manual
(Cat. No. W418)

CX-Designer Application software to create screen data

for NS-series PTs.

Started from a NS-series
PT in the CX-Integrator
Network Configuration
Window.

CX-Designer User’s Man­ual (V088)

CX-Profibus Application software for setting the PROFI-

BUS master.

Started from a PROFI­BUS-DP Unit in the CX­Programmer I/O tables

CX-Profibus Operation
Manual (Cat. No. W05E­EN)

CX-Thermo Application software to set and control

parameters in components such as Temper­ature Control Units.

Started from a E5@R,
E5@N, or E5ZN Temper­ature Control Unit in the
CX-Integrator Network
Configuration Window.

Online Help

CX-FLnet Application software for system setting and

monitoring of SYSMAC CS/CJ-series FLnet
Units

Started from a FLnet Unit
in the CX-Programmer
I/O tables.

---

CX-Server Middleware necessary for CX-One applica-

tions to communicate with OMRON compo­nents, such, such as PLCs, Display
Devices, and Temperature Control Units.

--- ---

PLC Tools (Installed
automatically.)

A group of components used with CX-One
applications, such as the CX-Programmer
and CX-Integrator. Includes the following:
I/O tables, PLC memory, PLC Setup, Data
Tracing/Time Chart Monitoring, PLC Error
Logs, File Memory, PLC clock, Routing
Tables, and Data Link Tables.

Components are started
from the various Support
Software.

Refer to documentation
of individual Support
Software.

Support Software

in CX-One

Outline Startup method within

CX-One

Documentation

(PDF manuals provided

in CD-ROM)

7

Support Software in CX-One Section 1-3

1-3-2 Starting Support Software in CX-One

Support Software in CX-One can be started from the I/O tables in the CX-Pro­grammer, from the Network Configuration Window in the CX-Integrator, or
from the Tools Menus as shown in the following diagram. This is called the
Specialized Support Tool startup function and it is enabled when the CX-Pro­grammer and other Support Software is installed from the CX-One.

CX-One Startup Diagram

CX-Programmer CX-Integrator

I/O Table Window

CS/CJ-series CPU Unit

Start with Settings
Inherited

Start with Settings
Inherited

CPU Rack

Start with Settings
Inherited

Ethernet Unit

(CS1W/CJ1W-ETN@@)

Controller Link Unit

(CS1W/CJ1W-CLK@@)

SYSMAC LINK Unit

(CS1W-SLK@@)

DeviceNet Unit

(CS1W/CJ1W-DRM@@)

Start with Settings
Inherited

Select CX-Integrator.

CX-Protocol

CX-Position

CX-Motion-NCF

CX-Motion

CX-Process Tool

Start with Settings
Inherited

Select CX-Protocol.

Start with Settings
Inherited

Start with Settings
Inherited

Start with Settings
Inherited

Start with Settings
Inherited

Faceplate Auto­Builder for NS

Switch Box Utility

Serial Communications
Board/Unit
(CS1W-SCB@@)
(CS1W/CJ1W-SCU@@)

Position Control Unit
(CS1W/CJ1W-NC@@@)

Position Control Unit with MECHA­TROLINK-II Communications
(CJ1W-NCF@@)

Motion Control Unit
(CS1W-MC@@@)

Loop Control Unit/Board
(CS1W-LC001/LCB@@)
Loop Control CPU Unit
(CJ1G-CPU@@P)
Process Control CPU Unit
(CS1D-CPU@@P)

Select Tools - Network Settings.

Select Tools - Switch Box Utility.

Network Configuration Window

CS/CJ-series CPU Unit

Ethernet, Controller Link, or SYSMAC LINK

DeviceNet

NS-series PC (-V1)

Start with Settings
Inherited

NT Link

E5@@ Temperature
Controller

Start with Settings
Inherited

CompoWay/F

Select Tools - Start Routing Table from the menu bar
or right-click Network Communications Unit in Online
Connection Information Window and select Start Rout-
ing Table from the pop-up menu.

Select Tools - Start Data Link from the menu bar or
right-click Controller Link or SYSMAC LINK Unit in On­line Connection Information Window and select Start
Data Link from the pop-up menu.

CX-Designer

CX-Thermo

Routing Table
Component

Data Link
Component

CX-Drive

CX-Profibus

PROFIBUS-DP
Master Unit
(CJ1W-PRM@@)

CX-FLnet

FL-net Unit
(CS1W/CJ1W-FLN@@)

Started with Settings
Inherited

Start with Settings
Inherited

Start with Settings
Inherited

8

System Requirements Section 1-4

Starting while Inheriting
Settings

• Setting the device type is not required every time different Support Soft­ware is started.

• The online connection is also inherited by the newly opened Support Soft­ware.

• New project files are automatically created for the newly opened Support
Software.

Starting with or without
Inheriting Settings

If Open - Save As is selected after starting Support Software, the save to
folder will be the same as the one used with the CX-Programmer.

1-4 System Requirements

1-4-1 System Requirements

The system requirements for the CX-One are given in the following table.

Note (1) CX-One Operating System Precaution

The CX-One will not run on Microsoft Windows 95 or any other OS not
listed above. If such an OS is being used on the client computer, the OS
must be upgraded before installing the CX-One. System requirements
and hard disk space may vary with the system environment.

(2) The amount of memory required varies with the Support Software used

in CX-One. Refer to user documentation for individual Support Software
for details.

(3) An RS-232C port is required to connect the Support Software in CX-One

to a PLC. If the computer provides only a USB port, use a CS1W-CIF31
USB-to-RS-232C Conversion Cable. For connecting to the CP Series,
however, an over-the-counter USB cable (type A-B) can be used.

Item Requirement

Operating system (OS)
(See note 1.)
Japanese or English sys­tem

Microsoft Windows
98SE

Microsoft Windows
NT (Service Pack 6a)

Microsoft Windows
2000 (Service Pack 3
or higher) or Microsoft
Windows Me

Microsoft Windows
XP

Computer IBM PC/AT or compatible with a Pentium II 333 MHz or faster processor

(Pentium III 1 GHz or faster recommended.)

Memory 256 MB minimum (See note 2.)

Hard disk Approx. 1.8 GB or more available space is required to install the complete CX-One package.

Display SVGA (800 × 600) or better high-resolution display with 256 colors min.

Disk drive CD-ROM drive

Communications ports One RS-232C port min. (See note 3.)

Other Internet access is required for online user registration, including a modem or other hardware

connection method.

9

System Requirements Section 1-4

1-4-2 Hard Disk Space Requirements for Support Software in CX-One

Note If the complete CX-One package is installed, approximately 1.8 GB of hard

disk space will be required (including workspace required for installation).
Check available space on your hard disk before installing software.

Support Software in CX-One Approx. hard disk

space required.

Remarks

CX-Programmer Approx. 250 MB Options can be selected

or cleared to install or not
install individual Support
Software.

CX-Integrator Approx. 100 MB

CX-Position Approx. 15 MB

CX-Motion Approx. 40 MB

CX-Motion-NCF Approx. 100 MB

CX-Motion-MCH Approx. 100 MB

CX-Drive Approx. 100 MB

CX-Designer Approx. 500 MB

CX-Process Tool Approx. 65 MB

Faceplate Auto-Builder for NS Approx. 50 MB

CX-Protocol Approx. 20 MB

CX-Profibus Approx. 10 MB

CX-Simulator Approx. 40 MB

CX-Thermo Approx. 20 MB

CX-FLnet Approx. 1 MB

Switch Box Approx. 5 MB

CX-Server and PLC Tools Approx. 300 MB Always installed.

10

System Requirements Section 1-4

11

SECTION 2

Installation and Uninstallation

This section describes how to install and uninstall the software provided in the CX-One.

2-1 Installing the CX-One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2-1-1 Confirmations before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2-1-2 Installing the CX-One. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2-2 CX-One Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

2-2-1 Modifying the Installed Support Software in the CX-One. . . . . . . . 21

2-2-2 Re-installing the Support Software in the CX-One . . . . . . . . . . . . . 24

2-2-3 Removing all the Support Software in the CX-One . . . . . . . . . . . . . 26

2-2-4 Uninstalling the CX-Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

12

Installing the CX-One Section 2-1

2-1 Installing the CX-One

2-1-1 Confirmations before Installation

Time Requirements The CX-One FA Integrated Tool Package integrates all of the Support Soft-

ware for OMRON PLCs and Components. If the complete CX-One package is
installed, between approximately 15 and 40 minutes will be required for instal­lation depending on the performance of the computer.

Example: The complete CX-One package can be installed in approximately

10 minutes with an Intel Celeron 2.2-GHz processor, 512 MB or
RAM, and a 48X CD-ROM drive.

Precautions for
Installation

• Close all programs running on Windows before starting the installation
procedure.

• The CX-One cannot be installed from a network drive, such as a CD drive
or hard disk drive shared on a network. Always install the CX-One from a
CD drive on the computer onto which the software is being installed.

• Do not install onto a compressing drive. Recovery will not be possible if
file corruption occurs.

• Do not stop the setup process in the middle. Copied files may remain in
the installation directory.

• Do not turn OFF or reset the computer in the middle of the installation pro­cess. Computer data may become corrupted.

• The CX-One cannot be installed on Windows 95.

• For Windows 98, always use Windows 98 Second Edition.

• For Windows 2000, Service Pack 3 or later must be installed. The service
pack can be confirmed by selecting Start - Settings - Control Panel -
System. The service pack will be displayed under System on the General
Tab Page of the System Properties Dialog Box. If a service pack is not
displayed, no service pack has been installed. Refer to Microsoft's web­site for service pack installation methods.

• On Windows NT 4.0, 2000, or XP, the administrator or a user with admin­istrator rights must perform the installation. Other users will not have suffi­cient write permissions and access errors will occur.

• It may be necessary to restart Windows after finishing the installation. If
required, restart Windows according to the messages displayed by the
Installer.

Note Internet Explorer version 5.0 or higher must be installed in advance to use the

CX-Server Installer. Install Internet Explorer version 5.0 in advance if it is not
already installed.

2-1-2 Installing the CX-One

The following procedure is for installing the CX-One when none of the Sup­port Software in the CX-One has been previously installed.

Note If the complete CX-One package is installed, approximately 1.8 GB of hard

disk space will be required (including workspace required for installation).
Check available space on your hard disk before installing software.

1,2,3... 1. Insert disk 1 of the CX-One installation disks (CD-ROM) into the CD-ROM

drive.

13

Installing the CX-One Section 2-1

2. The setup program will start automatically and the Choose Setup Lan­guage Dialog Box will be displayed.

The language of the operating system running on the computer will be se­lected automatically.

If the above dialog box is not displayed, double-click the CD-ROM driver
from the Explorer to display it.

Select the language to be installed and then click the OK Button.

Note Only the CX-Programmer supports languages other than English

and Japanese (including Italian, Spanish, German, French, and
Chinese). If any language other than English or Japanese is select­ed, the CX-Programmer will be installed in the selected language
and all other software will be installed in English (United States).

When the OK Button is clicked, a splash window for the CX-One will be
displayed, followed by the Setup Wizard.

3. If the CX-Server is already installed on the computer, the following dialog
box will be displayed as a prompt to delete the older version of the CX­Server.

Click the OK Button and uninstall the CX-Server. If the Cancel Button is
clicked, CX-One installation will be exited.

If an earlier version of any of the Support Software is already installed in
the computer, one of the following dialog boxes will be displayed.

14

Installing the CX-One Section 2-1

Dialog Box When an Earlier Version of the CX-Programmer Is Installed

Click the OK Button and uninstall the earlier version of the CX-Program­mer. If the

Cancel Button is clicked, CX-One installation will continue with­out uninstalling the earlier version of the CX-Programmer. This would
result in there being two versions of the CX-Programmer installed at the
same time, so we recommend always clicking the OK Button.

Dialog Box When an Earlier Version of Other Support Software Is
Installed

Click the OK Button and uninstall the earlier version of the Support Soft­ware. If the Cancel Button is clicked, CX-One installation will be canceled.

4. The CX-One Setup Wizard will be started. Click the Next Button.

15

Installing the CX-One Section 2-1

5. The License Agreement Dialog Box will be displayed.

Read the license agreement completely and if you accept all of the terms,
select the I accept the terms of the license agreement Option and click the
Next Button.

6. The User Information Dialog Box will be displayed.

The default names registered in the computer will be entered for the user
name and company name. Enter the license number and click the Next
Button. The license number is given on the Software License/Registration
Card provided with the product.

16

Installing the CX-One Section 2-1

7. The Choose Destination Location Dialog Box will be displayed.

Select the destination location and click the Next Button. By default, the
CX-One will be installed in C:\Program Files\OMRON\CX-One\.

8. The Setup Type Dialog Box will be displayed.

Select the Complete or Custom Option and click the Next Button.

Note (1) CX-One installation will require approximately the same amount of time

(approximately 15 to 40 minutes) regardless of whether Complete or
Custom is selected. As a rule, select Complete and install the entire pack­age at the same time provided that there is sufficient disk space avail­able.

17

Installing the CX-One Section 2-1

(2) CX-Profibus will normally not be installed. Select Custom and then select

CX-Profibus to install it.

The Select Features Dialog Box will be displayed if Custom was selected.

Note The above dialog box will not be displayed if Complete is selected.

Proceed to step 9.

Select the features to be installed and click the Next Button.

Options

@ CX-Programmer
@ CX-Integrator
@ CX-Designer
@ CX-Position
@ CX-Motion
@ CX-Motion-NCF
@ CX-Drive
@ CX-Motion-MCH
@ CX-Process
@ Face Plate Auto-Builder for NS
@ CX-Protocol
@ CX-Thermo
@ CX-Simulator
@ SwitchBox
@ CX-Profibus
@ CX-FLnet
@ CX-Server (Selected and grayed out.)
@ PLC Tools (Selected and grayed out.)

18

Installing the CX-One Section 2-1

9. If Complete was selected or if Custom was selected and the Smart FB Li­brary feature was selected, the Choose Destination Location of the
OMRON FB Library Dialog Box will be displayed.

Check the destination location and click the Next Button. By default, the
Smart FB Library will be install in C:\Program Files\OMRON\CX-One\FBL\.

10. The Select Program Folder Dialog Box will be displayed.

Specify the location to add a shortcut in the program folder of the Windows
Start Menu and click the Next Button.

19

Installing the CX-One Section 2-1

11. The Ready to Install the Program Dialog Box will be displayed.

Click the Install Button. The Installer will start the installation.

To check the installation settings, click the Back Button. To cancel instal­lation, click the Cancel Button.

12. The following dialog box will be displayed. Replace the installation disk
(CD-ROM) as instructed by the message and click the OK Button.

Alternatively:

20

Installing the CX-One Section 2-1

13. The following dialog box will be displayed when the Installer completes the
installation.

Click the Finish Button. The Readme file will be displayed.

The following dialog box will be displayed if restarting the computer is re­quired.

Select the desired option and click the Finish Button. If the Yes, I want to
restart my computer now Option is selected, the computer will be restarted
and then the Readme file will be displayed.

Note (a) It may be necessary to restart Windows after finishing the instal-

lation. If required, restart Windows according to the messages
displayed by the Installer.

(b) Always read the Readme.txt file before using the CX-One.

Select to restart the computer
immediately (default).

Select to restart the computer
manually at a later time.

21

CX-One Maintenance Section 2-2

14. The Online Registration Dialog Box will be displayed when the Readme file
is closed.

A wizard will be started and will connect to the OMRON CX-One website
if the Register Button is clicked. (See notes a and b.)

Note (a) If the Exit Button is clicked to cancel registration, the Online Reg-

istration Dialog Box will be displayed every time CX-One Support
Software is started.

(b) Online installation will not be possible if the computer is not con-

nected to the Internet. Enter the required information on the reg­istration card and mail it in.

This completes installation of the CX-One.

Note (1) Even if the previous versions for Support Software in the CX-One are un-

installed, the folders for the previous versions will remain in C:\Program
Files\OMRON. By default, the project files and other files that were cre­ated by the Support Software (e.g., .cxp project files for CX-Programmer)
will be in this directory. If this data is to be used by the CX-One, we rec­ommended moving the files to suitable folders after installing CX-One.

(2) Any OMRON Support Software or Communications Middleware that is

not included in CX-One will remain installed on the hard disk even after
the CX-One is installed. This will not create any particular problems.

Examples:

• DeviceNet Configurator (Support Software)

• FinsGateway (Communications Middleware)

2-2 CX-One Maintenance

The following maintenance can be performed once the CX-One has been
installed.

1,2,3... 1. Modifying the installed Support Software in the CX-One

2. Re-installing the Support Software in the CX-One that was previously in­stalled

3. Removing all the Support Software in the CX-One

2-2-1 Modifying the Installed Support Software in the CX-One

The CX-One Support Software that is installed can be modified using the fol­lowing procedure.

Note Whenever installing from an individual Support Software CD-ROM any Sup-

port Software that has previously been installed from the CX-One Package,
always uninstall the previous Support Software first. Use the following proce­dure and clear the selection for only the individual Support Software to be
reinstalled. When the installation procedure has been completed, then install
the Support Software from the individual Support Software CD-ROM. The

22

CX-One Maintenance Section 2-2

Support Software will not operate properly if it is installed without first unin­stalling it.

If the version of the CX-Server on the individual Support Software CD-ROM is
lower than the version of the CX-Server bundled with the CX-One, install only
the CX-Position and NOT the CX-Server. (A message will be displayed if the
version is lower.) If a version of CX-Server that is lower than the version with
the CX-One is installed, the CX-One will not operate properly.

1,2,3... 1. Insert disk 1 of the CX-One installation disks (CD-ROM) into the CD-ROM

drive.

2. The Choose Setup Language Dialog Box will be displayed and the lan­guage of the operating system running on the computer will be selected
automatically.
(If the following dialog box is not displayed, double-click the CD-ROM driv­er from the Explorer to display it.)
Select the language to be installed and then click the OK Button.

3. A splash window for the CX-One will be displayed, and the installation
modification process will start.

4. The CX-One Maintenance Wizard will be displayed.
Select the Modify Option and click the Next Button.

23

CX-One Maintenance Section 2-2

5. The Select Features Dialog Box will be displayed.
The features that are selected will change depending on the CX-One Sup­port Software already installed in the computer. The CX-One installation
will be modified according to the features selected here.

• Select the features to be added.

• Be sure that all features that are not to be deleted are selected.

• Clear the selections for features to be removed.

Note Any Support Software feature that is not selected here will be deleted from the

compute. Check the selections carefully.

Click the Next Button.

The CX-One installation will be modified according to the feature selec­tions. Continue with the installation procedure according to the messages
displayed by the Installation Wizard.

6. If either of the following dialog boxes is displayed, replace the installation
disk (CD-ROM) as instructed by the message and click the OK Button.

Alternatively:

Select the features that are to be
added or those that are not to be
deleted.

Clear the selections for features that
are to be deleted.

24

CX-One Maintenance Section 2-2

7. The following dialog box will be displayed when the Installer completes
modifying the installation. Click the Finish Button.

2-2-2 Re-installing the Support Software in the CX-One

The previously installed Support Software can be re-installed using the follow­ing procedure. This procedure should be used to restore a previous installa­tion, e.g., if previously installed CX-One Support Software has been deleted
by accident.

1,2,3... 1. Insert disk 1 of the CX-One installation disks (CD-ROM) into the CD-ROM

drive.

2. The Choose Setup Language Dialog Box will be displayed and the lan­guage of the operating system running on the computer will be selected
automatically.

(If the following dialog box is not displayed, double-click the CD-ROM driv­er from the Explorer to display it.)
Select the language to be installed and then click the OK Button.

25

CX-One Maintenance Section 2-2

3. A splash window for the CX-One will be displayed, and the re-installation
process will start. The CX-One Installation Wizard will be displayed.

Select the Repair Option and click the Next Button.

The previously installed CX-One Support Software will be re-installed.
Continue with the installation procedure according to the messages dis­played by the Installation Wizard.

4. The following dialog box will be displayed when the Installer completes re­installing the software. Click the Finish Button.

26

CX-One Maintenance Section 2-2

2-2-3 Removing all the Support Software in the CX-One

Use the following procedure to delete all of the Support Software in the CX­One from the computer.

Note The CX-Server will not be deleted from the computer even if all CX-One Sup-

port Software is deleted. The CX-Server must be uninstalled separately to
delete it.

1,2,3... 1. Select Start - Settings - Control Panel - Add/Remove Programs. The

Add/Remove Programs Dialog box will be displayed.

2. Select CX-One from the dialog box.

3. Click the Change/Remove Button.

27

CX-One Maintenance Section 2-2

4. The CX-One Installation Wizard will be displayed. Select the Remove Op­tion and click the Next Button.

5. The following dialog box will be displayed to confirm that all CX-One soft­ware is to be removed. Click the Yes Button to start the Uninstaller that will
delete the CX-One and then follow the messages in the dialog boxes to de­lete the CX-One.

6. When the uninstallation has been completed, the following dialog box will
be displayed. Click the Finish Button.

28

CX-One Maintenance Section 2-2

2-2-4 Uninstalling the CX-Server

Always uninstall the CX-Server Diver Management Tools before uninstalling
the CX-Server.

Note (1) Do not uninstall the CX-Server if there are other programs on the com-

puter that use it as the communications driver, e.g., the CX-Programmer.
If the CX-Server is uninstalled, it will no longer be possible to use these
other programs.

(2) Do not uninstall the CX-Server while other programs that use it as the

communications driver are running on the computer, e.g., the CX-Pro­grammer. The CX-Server may not uninstall properly if other programs are
using it.

(3) When uninstalling all of the CX-Server software, always uninstall the CX-

Server Driver Management Tool before uninstalling the CX-Server. If the
CX-Server is uninstalled first, it may no longer be possible to uninstall the
CX-Server Driver Management Tool properly.

1,2,3... 1. Select Start - Settings - Control Panel - Add/Remove Programs. The

Add/Remove Programs Dialog Box will be displayed.

Select CX-Server Driver Management Tool from the dialog box and click
the Change/Remove Button.

2. A file deletion confirmation dialog box will be displayed. Click the Yes But­ton.

The CX-Server Driver Management Tool will be uninstalled.

29

CX-One Maintenance Section 2-2

3. An uninstall confirmation dialog box will be displayed. Click the Yes Button.

4. The CX-Server will be uninstalled.

When the uninstallation has been completed, the following dialog box will
be displayed. Click the Finish Button. The Add/Remove Programs Dialog
Box will be displayed again.

5. In the same way, select CX-Server from the Add/Remove Programs Dia­log Box, click the Change/Remove Button, and uninstall the CX-Server by
repeating steps 2 though 4.

6. Restart the computer when all programs have been uninstalled.

30

CX-One Maintenance Section 2-2

31

Revision History

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.

The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.

Revision code Date Revised content

01 February 2005 Original production

02 November 2005 Revisions for upgrading from CX-One Ver. 1.0 to Ver. 1.1.

Cat. No. W444-E1-02

Revision code

32

Revision History

OMRON Corporation
Control Devices Division H.Q.

Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: [phone]/Fax: [phone]

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69, NL-2132 JD Hoofddorp
The Netherlands
Tel: [phone]/Fax: [phone]

OMRON ELECTRONICS LLC

1 East Commerce Drive, Schaumburg, IL 60173
U.S.A.
Tel: [phone]/Fax: [phone]

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,
#11-01, UE Square,
Singapore 239920
Tel: [phone]/Fax: [phone]

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120 China
Tel: [phone]/Fax: [phone]

Authorized Distributor:

Cat. No. W444-E1-02 Note: Specifications subject to change without notice

Printed in Japan

This manual is printed on 100% recycled paper.