LOW-RANGE WET/WET
INDUSTRIAL DIFFERENTIAL TRANSDUCER
STANDARD AND METRIC MODELS
0-50 to 0-800 inH
O
2
0-2 to 0-22 psi-Standard Models
0-130 to 0-1500 mbar-Metric Models
Differential Pressure
mV/V Output
0 to 5 Vdc Output
4 to 20 mA Output
1 psi = 27.68 inH2O
1 bar = 14.5 psi
1 kg/cm2 = 14.22 psi
1 atmosphere = 14.7 psi = 29.93
inHg = 760.2 mmHg = 1.014 bar
PX82/PXM82 Series
Standard
U Inches of Water Differential
at Line Pressure—Up to
1500 psi (100 bar)
®
U Stainless Steel/Inconel
Construction for Harsh
Industrial Environments
U High Overpressure
Capability and High
Operating Temperature
U 5-Point Calibration Provided:
0%, 50%, 100%, 50%, 0%
Cable style.
STANDARD
PX82B1-005DI
shown smaller than
actual size.
METRIC
PXM82MB0-190MBARDI
shown smaller than
actual size.
Twist-lock
style
PRESSURE TRANSDUCERS
DIFFERENTIAL
B
OMEGA’s PX82/PXM82 Series wet/
wet, differential pressure transducers
can measure inches of water
differential at line pressure up
to 1500 psi (100 bar). This high line
pressure capacity, a high operating
temperature, and excellent temperature
compensation make the PX82/PXM82
Series extremely accurate and reliable.
The rugged Inconel® diaphragms and
stainless steel body
PXM82
harsh industrial environments. The
PX82/PXM82 Series is available with
mV/V, 5 V, or 4 to 20 mA outputs.
Mounting in any position via use of one
of the 4 ports is available on the high
and low side.
Series high performance
give the PX82
in
/
B-258
LOW-RANGE WET/WET
INDUSTRIAL DIFFERENTIAL TRANSDUCER
SPECIFICATIONS
mV/V Output
Electrical:
Excitation: 10 Vdc (15 V max)
Output: 1.5 mV/V nominal
Input Resistance: 5000 Ω minimum
Output Resistance: 5000 ±25 Ω
Zero Balance: ±2% FS
0.5 to 5.5 Vdc Output
Electrical:
Excitation: 10 to 35 Vdc
Output: 0.5 to 5.5 Vdc ±10%
Zero Balance: 0.5 V ±2% adj
4 to 20mA Output
Electrical:
Excitation: 10 to 40 Vdc
Output: 4 to 20 mA ±10% adj
Zero Balance: 4 mA +10% -2% adj
COMMON SPECIFICATIONS
Performance:
Accuracy: 0.25% linearity,
hysteresis and repeatability
combined
Environmental:
Operating Temp Range:
-34 to 107°C (-30 to 225°F)
Compensated Temp Range:
-1 to 54°C (30 to 130°F)
Pressure Effects:
Zero: <2%/1000 psi (70 bar)
line pressure
Span: -2.45%/1000 psi (70 bar)
line pressure
Thermal Effects:
Zero: ±0.50% FSO maximum over
compensated range
Span: ±0.50% rdg maximum over
compensated range
Pressure:
Line Operating Pressure:
1500 psi (100 bar)
Safe Overpressure:
1000 psi (70 bar) each side
Burst Pressure:
2500 psi (170 bar) minimum
Mechanical:
Wetted Parts:
17-4 PH stainless steel and
Inconel 625
Pressure Port: See dimensional
drawings on following pages
Electrical Connection:
Style 0: 1.2 m (4') cable
Style 1: PTIH-10-6P (or equal)
Style 6: mini DIN
Mating Connector:
Style 1: PT06F10-6S
(sold separately)
Style 6: Mating connector
(included)
Weight: 1.8 kg (4 lb)
Style 1 Mating
Connector
PT06F10-6S
STANDARD
PX82B0-002DI
shown smaller
than actual size.
STANDARD AND METRIC
CUSTOM CONFIGURATIONS
MODEL NUMBER SPECIFICATION:
PXM82B0-002DV
OUTPUT:
V = 1.5 mV/V nominal
5V = 0.5 to 5.5 Vdc
psi
RANGES
METRIC bar
RANGES
Extra cable length: add suffix “-(Length in feet)FT”, additional price per foot over standard length 1.2 m (4') on 5 V and 4 to 20 mA output.
Ordering Examples: PX82D0-500WCDI, 500 inH2O pressure range with 4 to 20 mA output and 1.2 m (4') PVC cable.
PX82D0-010DV-50FT, 10 psi pressure range with mV/V output and 15.2 m (50') PVC cable.
PX82D1-200WCDI, 200 inH20 pressure range with 4 to 20 mA output and twist-lock connector, PT06F10-6S, mating connector
(sold separately).
I = 4 to 20 mA
DIFFERENTIAL PRESSURE
RANGE IN psi FOR PX82, IN bar FOR PXM82
ELECTRICAL CONNECTION:
0 = 1.2 m (4') cable
1 = PTIH-10-6P connector
or equivalent
6 = mini DIN connector
(no shunt)
PRESSURE PORT: = Three 1/8-27 FNPT and one 1/4 NPT male per side
PRESSURE PORT: B = Three 1/8-27 FNPT inside
MB = Three G1/8 and one G1/4 female per side
MB = Three G1/8 and one G1/4 female per side
B-259
ARTWORK/PRODUCT ART/
PX82-millivolt output
mV/V OUTPUT STANDARD RANGES
mV/V Output
0-50 inH
(0-130 to 0-1500 mbar)
Differential Pressure
O to 0-22 psi
2
Dimensions: mm (inch)
1/2-14 NPT
CONDUIT FITTING
PIGTAIL LENGTH
100-150 (4-6)
4-CONDUCTOR
3 m (10'), 4-CONDUCTOR
SHIELDED PVC CABLE
SHIELDED PVC CABLE
COLOR CODED
COLOR CODED
PRESSURE TRANSDUCERS
DIFFERENTIAL
PX82 Series
Standard
U inH2O Differential at Line
Pressure—Up to 1500 psi
®
U Stainless Steel/Inconel
Construction for Harsh
Industrial Environments
U High Overpressure
Capability and High
Operating Temperature
U 5-Point Calibration
Provided: 0%, 50%,
100%, 50%, 0%
STANDARD
PX82B1-005DV
shown smaller
than actual
size.
Twist-lock
style.
1/8-27 NPT, 3 PLACES,
25 (1.00)
Connections
Pin Wire
A Green + Output
B White – Output
C Black – Input
D Red + Input
HIGH +
(2.13)
94
(3.7)
BOTH ENDS
LOW –
54
76 (3.0)
DIA
1/8-27 NPT PIPE PLUG,
1/8-27 NPT PIPE PLUG
3 PLACES
w/1/4-20 x 6.3 (0.25)
1/4-18 NPT PIPE PLUG, BOTH ENDS
DEEP, 2 PLACES
STANDARD MODELS
To Order
Models with mV/V Output and 1.2 m (4') Cable
RANGE MODEL NO. COMPATIBLE METERS
0 to 50 inH
0 to 100 inH
0 to 150 inH
0 to 200 inH
0 to 300 inH
0 to 500 inH
0 to 800 inH
0 to 2 psi 0 to 0.14 bar PX82B[*]-002DV DP41-S, DP25B-S
0 to 3 psi 0 to 0.20 bar PX82B[*]-003DV DP41-S, DP25B-S
0 to 4 psi 0 to 0.27 bar PX82B[*]-004DV DP41-S, DP25B-S
0 to 5 psi 0 to 0.34 bar PX82B[*]-005DV DP41-S, DP25B-S
0 to 6 psi 0 to 0.41 bar PX82B[*]-006DV DP41-S, DP25B-S
0 to 8 psi 0 to 0.55 bar PX82B[*]-008DV DP41-S, DP25B-S
0 to 10 psi 0 to 0.69 bar PX82B[*]-010DV DP41-S, DP25B-S
0 to 15 psi 0 to 1.0 bar PX82B[*]-015DV DP41-S, DP25B-S
0 to 18 psi 0 to 1.2 bar PX82B[*]-018DV DP41-S, DP25B-S
0 to 22 psi 0 to 1.5 bar PX82B[*]-022DV DP41-S, DP25B-S
Comes complete with 5-point NIST traceable calibration.
[*] Insert “0” for 1.2 m (4') cable, “1” for twist-lock connector, or “6” for mini DIN connector.
To order extra cable length, add suffix “-(length in feet)FT” to model number and additional
price per foot beyond standard length.
Ordering Examples: PX82B0-100WCDV, 100 inH2O differential pressure transducers with
1.5 mV/V output and 1.2 m (4') of shielded cable.
PX2B0-010DV-25FT, 10 psi differential pressure transducer with 1.5 mV/V output and 7.6 m
(25') of shielded cable.
Visit omega.com/px82-mv for Pricing and Details
O
O
2
O
2
O
2
O
2
O
2
O
2
0 to 125 mbar
0 to 249 mbar
0 to 374 mbar
0 to 498 mbar
0 to 748 mbar
0 to 1245 mbar
0 to 1993 mbar
2
PX82B[*]-050WCDV DP41-S, DP25B-S
PX82B[*]-100WCDV DP41-S, DP25B-S
PX82B[*]-150WCDV DP41-S, DP25B-S
PX82B[*]-200WCDV DP41-S, DP25B-S
PX82B[*]-300WCDV DP41-S, DP25B-S
PX82B[*]-500WCDV DP41-S, DP25B-S
PX82B[*]-800WCDV DP41-S, DP25B-S
B
B-260
ARTWORK/PRODUCT ART/
PX82-millivolt output
mV/V OUTPUT METRIC RANGES
mV/V Output
0-130 mbar to 0-2 bar
0-2 to 0-30 psi
Differential Pressure
1/2-14 NPT
CONDUIT FITTING
PIGTAIL LENGTH
100 to 150 (4 to 6)
4-CONDUCTOR
3 m (10')
SHIELDED PVC CABLE
4-CONDUCTOR
COLOR CODED
SHIELDED PVC CABLE
COLOR CODED
PXM82 Series
Standard
U mbar Differential at Line
Pressure—Up to 100 bar
U Stainless Steel/Inconel
Construction for Harsh
Industrial Environments
U High Overpressure
Capability
U High Operating
Temperature
U 5-Point Calibration
Provided: 0%, 50%,
100%, 50%, 0%
METRIC
PXM82MB1-190mBARDI
shown smaller than actual size.
Twist-lock
style.
G 1/8, 3 PLACES,
25 (1.00)
HIGH +
54
(2.13)
94
(3.7)
BOTH ENDS
LOW –
Dimensions: mm (inch)
76 (3.0)
DIA
G 1/4 PIPE PLUG, BOTH ENDS
G 1/8 PIPE PLUG,
G 1/8 PIPE PLUG,
3 PLACES
2 PLACES
CONNECTIONS mV/V
Style 1 Mating
Connector
PT06F10-6S.
PIN Cable DIN
+Output A Green 2
-Output B White 3
-Input C Black GRND
+Input D Red 1
METRIC MODELS
To Order
mV/V Output with G
DIFFERENTIAL PRESSURE
0 to 130 mbar 0 to 1.9 psi PXM82MB[*]-130mBARDV DP41-S, DP25B-S
0 to 190 mbar 0 to 2.8 psi PXM82MB[*]-190mBARDV DP41-S, DP25B-S
0 to 250 mbar 0 to 3.6 psi PXM82MB[*]-250mBARDV DP41-S, DP25B-S
0 to 370 mbar 0 to 5.4 psi PXM82MB[*]-370mBARDV DP41-S, DP25B-S
0 to 500 mbar 0 to 7.3 psi PXM82MB[*]-500mBARDV DP41-S, DP25B-S
0 to 750 mbar 0 to 11 psi PXM82MB[*]-750mBARDV DP41-S, DP25B-S
0 to 1.00 bar 0 to 15 psi PXM82MB[*]-001BARDV DP41-S, DP25B-S
0 to 1.25 bar 0 to 18 psi PXM82MB[*]-1.25BARDV DP41-S, DP25B-S
0 to 2.00 bar 0 to 30 psi PXM82MB[*]-002BARDV DP41-S, DP25B-S
Comes complete with 5-point NIST traceable calibration.
[*] Insert “0” for 1.2 m (4') cable, “1” for twist-lock connector or “6” for mini DIN connector.
To order extra cable on cable style models, add suffix “-(total length in meters)M”
and additional price per meter beyond the standard length.
Ordering Examples: PXM82MD0-130mBARDV-10M, 130 mbar differential pressure
transducer with 1.5 mV/V output and 10 m (32') cable.
PXM82MD1-001BARDV, 1 bar differential pressure transducer with 1.5 mV/V output and
twist-lock connector. PT06F10-6S, mating connector (sold separately).
Visit omega.com/pxm82 for Pricing and Details
1
⁄
Pressure Connection, Specify Electrical Termination
4
RANGE MODEL NO.
COMPATIBLE METERS
B-261
ARTWORK/PRODUCT ART/
PX82 Voltage and Current Output
0.5 to 5.5 Vdc OUTPUT STANDARD RANGES
0.5 to 5.5 Vdc Output
0-50 inH
O to 0-22 psi
2
(0-130 to 0-1500 mbar)
Differential Pressure
PX82 Series
Standard
U inH2O Differential at Line
Pressure—Up to 1500 psi
®
U Stainless Steel/Inconel
Construction for Harsh
Industrial Environments
U High Overpressure
Capability and High
Operating
Temperature
U 5-Point Calibration
Provided: 0%, 50%,
100%, 50%, 0%
CONNECTIONS Volts
PIN Cable DIN
+ Output A Green 2
– Output B White 3
– Input C Black GRND
+ Input D Red 1
Style 1 Mating
Connector
PT06F10-6S.
Current Wiring
Wiring Code
RED
BLACK
+ SIGNAL
– SIGNAL
1/2-14 NPT
CONDUIT FITTING
(1.75)
44
Dimensions: mm (inch)
10 FT (3m), 2 CONDUCTOR
SHIELDED PVC CABLE
COLOR CODED
HIGH +
54
(2.13)
94
(3.7)
PIGTAIL LENGTH
100-150 (4-6)
4-CONDUCTOR
3 m (10'), 4-CONDUCTOR
SHIELDED PVC CABLE
SHIELDED PVC CABLE
COLOR CODED
COLOR CODED
SPAN ADJUSTMENT
(ZERO OTHER SIDE)
1/8-27 NPT, 3 PLACES,
BOTH ENDS
LOW –
76 (3.0)
DIA
1/4-18 NPT PIPE PLUG, BOTH ENDS
Connections
Voltage Wiring
Pin Wire
Wiring Code
A Green + Output
Green
+ OUTPUT
B White – Output
White
– OUTPUT
C Black – Input
Black
– INPUT
D Red + Input
Red
+ INPUT
1/8-27 NPT PIPE PLUG
1/8-27 NPT PIPE PLUG
w/1/4-20 x 6.3 (0.25)
w/1/4-20 x 6.3 (0.25)
DEEP 3 PLACES
DEEP, 2 PLACES
STANDARD MODELS
To Order
Models with 5 V Output
RANGE MODEL NO. COMPATIBLE METERS
0 to 50 inH
0 to 100 inH
0 to 150 inH
0 to 200 inH
0 to 300 inH
0 to 500 inH
0 to 800 inH
0 to 2 psi 0 to 0.14 bar PX82B[*]-002D5V DP41-S, DP25B-S
0 to 3 psi 0 to 0.20 bar PX82B[*]-003D5V DP41-S, DP25B-S
0 to 4 psi 0 to 0.27 bar PX82B[*]-004D5V DP41-S, DP25B-S
0 to 5 psi 0 to 0.34 bar PX82B[*]-005D5V DP41-S, DP25B-S
0 to 6 psi 0 to 0.41 bar PX82B[*]-006D5V DP41-S, DP25B-S
0 to 8 psi 0 to 0.55 bar PX82B[*]-007D5V DP41-S, DP25B-S
0 to 10 psi 0 to 0.69 bar PX82B[*]-010D5V DP41-S, DP25B-S
0 to 15 psi 0 to 1.0 bar PX82B[*]-015D5V DP41-S, DP25B-S
0 to 18 psi 0 to 1.2 bar PX82B[*]-018D5V DP41-S, DP25B-S
0 to 22 psi 0 to 1.5 bar PX82B[*]-022D5V DP41-S, DP25B-S
Comes complete with 5-point NIST traceable calibration.
[*] Insert “0” for 1.2 m (4') cable, “1” for twist-lock connector, or “6” for mini DIN connector.
Extra cable length: add suffix “-(length in feet)FT”, additional price per foot over
standard length.
Ordering Examples: PX82B0-100WCD5V, 100 inH2O differential pressure transducer with
0.5 to 5.5 Vdc output and 1.2 m (4') shielded PVC cable.
PX82B1-010D5V, 10 psi differential pressure transducer with 0.5 to 5.5 Vdc output and
twist-lock connection. PT06F10-6S, mating connector (sold separately).
Visit omega.com/px82-5v for Pricing and Details
O
O
2
O
2
O
2
O
2
O
2
O
2
0 to 125 mbar
0 to 249 mbar
0 to 374 mbar
0 to 498 mbar
0 to 748 mbar
0 to 1245 mbar
0 to 1993 mbar
2
PX82B[*]-050WCD5V DP41-S, DP25B-S
PX82B[*]-100WCD5V DP41-S, DP25B-S
PX82B[*]-150WCD5V DP41-S, DP25B-S
PX82B[*]-200WCD5V DP41-S, DP25B-S
PX82B[*]-300WCD5V DP41-S, DP25B-S
PX82B[*]-500WCD5V DP41-S, DP25B-S
PX82B[*]-800WCD5V DP41-S, DP25B-S
PRESSURE TRANSDUCERS
DIFFERENTIAL
B
B-262
PX82 Voltage and Current Output
0.5 to 5.5 Vdc OUTPUT METRIC RANGES
0.5 to 5.5 Vdc Output
0-130 mbar to 0-2 bar
0-2 to 0-30 psi
Differential Pressure
PIGTAIL LENGTH
100 to 150 (4 to 6)
4-CONDUCTOR
3m (10') 4-CONDUCTOR
SHIELDED PVC CABLE
SHIELDED CABLE
COLOR CODED
COLOR CODED
Dimensions: mm (inch)
PXM82 Series
Standard
U mbar Differential at Line
Pressure—Up to 100 bar
U Stainless Steel/Inconel
Construction for Harsh
Industrial Environments
U High Overpressure
Capability
U
High Operating
Temperature
U 5-Point Calibration
Provided: 0%, 50%,
100%, 50%, 0%
CONNECTIONS Volts
PIN Cable DIN
+ Output A Green 2
– Output B White 3
– Input C Black GRND
+ Input D Red 1
®
Style 1 Mating
Connector
PT06F10-6S.
1/2-14 NPT
CONDUIT FITTING
44
(1.75)
HIGH +
SPAN ADJUSTMENT
(ZERO OTHER SIDE)
G 1/8, 3 PLACES,
BOTH ENDS
LOW –
76 (3.0)
DIA
G1/8 PIPE PLUG,
G 1/8 PIPE PLUG,
54
(2.13)
94
(3.7)
G 1/4 PIPE PLUG, BOTH ENDS
METRIC MODELS
To Order
Models with G 1⁄8 and G 1⁄4 Female Pressure Connection, Specify Electrical Termination
DIFFERENTIAL PRESSURE
0 to 130 mbar 0 to 1.9 psi PXM82MB[*]-130mBARD5V DP41-S, DP25B-S
0 to 190 mbar 0 to 2.8 psi PXM82MB[*]-190mBARD5V DP41-S, DP25B-S
0 to 250 mbar 0 to 3.6 psi PXM82MB[*]-250mBARD5V DP41-S, DP25B-S
0 to 370 mbar 0 to 5.4 psi PXM82MB[*]-370mBARD5V DP41-S, DP25B-S
0 to 500 mbar 0 to 7.3 psi PXM82MB[*]-500mBARD5V DP41-S, DP25B-S
0 to 750 mbar 0 to 11 psi PXM82MB[*]-750mBARD5V DP41-S, DP25B-S
0 to 1.00 bar 0 to 15 psi PXM82MB[*]-001BARD5V DP41-S, DP25B-S
0 to 1.25 bar 0 to 18 psi PXM82MB[*]-1.25BARD5V DP41-S, DP25B-S
0 to 2.00 bar 0 to 30 psi PXM82MB[*]-002BARD5V DP41-S, DP25B-S
Comes complete with 5-point NIST traceable calibration.
] Insert “0” for 1.2 m (4') cable, “1” for twist-lock connector or “6” for mini DIN connector.
[
*
To order extra cable on cable-style models, add suffix “-(Total length in meters)M”
and additional price per meter beyond the standard length.
Ordering Examples: PXM82MD0-130mBARD5V-10M, 130 mbar differential pressure
transmitter with 0.5 to 5.5 Vdc output and 10 m (32') cable.
PXM82MD1-001BARD5V, 1 bar differential pressure transmitter with 0.5 to 5.5 Vdc output
and twist-lock connector. PT06F10-6S, mating connector (sold separately).
Visit omega.com/pxm82-i for Pricing and Details
RANGE MODEL NO.
3 PLACES
2 PLACES
COMPATIBLE METERS
B-263
ARTWORK/PRODUCT ART/
PX82 Voltage and Current Output
Current Wiring
4 to 20 mA OUTPUT STANDARD RANGES
4 to 20 mA Output
0-50 inH
(0-130 to 0-1500 mbar)
Differential Pressure
O to 0-22 psi
2
Wiring Code
RED
CONNECTIONS 4 to 20 mA
PIN Cable DIN
+ Input A Red 1
– Input B Black 2
+ SIGNAL
BLACK
– SIGNAL
10 FT (3m), 2 CONDUCTOR
SHIELDED PVC CABLE
COLOR CODED
PIGTAIL LENGTH
100-150 (4-6)
3 m (10'), 4-CONDUCTOR
SHIELDED PVC CABLE
COLOR CODED
Voltage Wiring
Wiring Code
Green
+ OUTPUT
White
– OUTPUT
Black
– INPUT
Red
+ INPUT
PRESSURE TRANSDUCERS
DIFFERENTIAL
PX82 Series
Standard
U inH2O Differential at Line
Pressure—Up to 1500 psi
U Stainless Steel/Inconel
Construction for Harsh
Industrial Environments
U High Overpressure
Capability and High
Operating Temperature
U 5-Point Calibration
Provided: 0%, 50%,
100%, 50%, 0%
STANDARD
PX82B0-002DI
shown smaller
than actual size.
®
Twist-lock
style.
1/2-14 NPT
CONDUIT FITTING
44
(1.75)
HIGH +
Dimensions:
mm (inch)
54
(2.13)
94
(3.7)
SPAN ADJUSTMENT
(ZERO OTHER SIDE)
1/8-27 NPT, 3 PLACES,
BOTH ENDS
LOW –
76 (3.0)
DIA
1/4-18 NPT PIPE PLUG, BOTH ENDS
1/8-27 NPT PIPE PLUG
1/8-27 NPT PIPE PLUG
w/1/4-20 x 6.3 (0.25)
w/1/4-20 x 6.3 (0.25)
DEEP 3 PLACES
DEEP, 2 PLACES
STANDARD MODELS
To Order
Models with 4 to 20 mA Output
RANGE MODEL NO. COMPATIBLE METERS
0 to 50 inH
0 to 100 inH
0 to 150 inH
0 to 200 inH
0 to 300 inH
0 to 500 inH
0 to 800 inH
0 to 2 psi 0 to 0.14 bar PX82B[*]-002DI DP41-S, DP25B-S
0 to 3 psi 0 to 0.20 bar PX82B[*]-003DI DP41-S, DP25B-S
0 to 4 psi 0 to 0.27 bar PX82B[*]-004DI DP41-S, DP25B-S
0 to 5 psi 0 to 0.34 bar PX82B[*]-005DI DP41-S, DP25B-S
0 to 6 psi 0 to 0.41 bar PX82B[*]-006DI DP41-S, DP25B-S
0 to 8 psi 0 to 0.55 bar PX82B[*]-008DI DP41-S, DP25B-S
0 to 10 psi 0 to 0.69 bar PX82B[*]-010DI DP41-S, DP25B-S
0 to 15 psi 0 to 1.0 bar PX82B[*]-015DI DP41-S, DP25B-S
0 to 18 psi 0 to 1.2 bar PX82B[*]-018DI DP41-S, DP25B-S
0 to 22 psi 0 to 1.5 bar PX82B[*]-022DI DP41-S, DP25B-S
Comes complete with 5-point NIST traceable calibration.
[*] Insert “0” for 1.2 m (4') cable, “1” for twist-lock connector, or “6” for mini DIN connector.
Extra cable length: Add suffix
standard length.
Ordering Examples: PX82B0-100WCDI-25FT, 100 inH2O differential pressure transmitter
with 4 to 20 mA output and 7.6 m (25') shielded PVC cable.
Visit omega.com/px82-i for Pricing and Details
O
2
O
2
O
2
O
2
O
2
O
2
O
2
0 to 125 mbar
0 to 249 mbar
0 to 374 mbar
0 to 498 mbar
0 to 748 mbar
0 to 1245 mbar
0 to 1993 mbar
“-(length in feet)FT”
PX82B[*]-050WCDI DP41-S, DP25B-S
PX82B[*]-100WCDI DP41-S, DP25B-S
PX82B[*]-150WCDI DP41-S, DP25B-S
PX82B[*]-200WCDI DP41-S, DP25B-S
PX82B[*]-300WCDI DP41-S, DP25B-S
PX82B[*]-500WCDI DP41-S, DP25B-S
PX82B[*]-800WCDI DP41-S, DP25B-S
and additional price per foot beyond
B
B-264
4 to 20 mA OUTPUT METRIC RANGES
PX82 Voltage and Current Output
4 to 20 mA Output
0-130 mbar to 0-2 bar
0-2 to 0-30 psi
Differential Pressure
PXM82 Series
Dimensions: mm (inch)
PIGTAIL LENGTH
100 to 150 (4 to 6)
2-CONDUCTOR
3m (10') 2-CONDUCTOR
SHIELDED PVC CABLE
SHIELDED CABLE
COLOR CODED
COLOR CODED
Standard
U mbar Differential at Line
Pressure—Up to 100 bar
U Stainless Steel/Inconel
Construction for Harsh
Industrial Environments
U High Overpressure
Capability
U High Operating
Temperature
U 5-Point Calibration
Provided: 0%, 50%,
100%, 50%, 0%
METRIC
PXM82MB1-190mBARDI shown
smaller than actual size.
Twist-lock
style.
1/2-14 NPT
CONDUIT FITTING
44
(1.75)
®
HIGH +
54
(2.13)
94
(3.7)
SPAN ADJUSTMENT
(ZERO OTHER SIDE)
G 1/8, 3 PLACES,
BOTH ENDS
LOW –
76 (3.0)
DIA
G 1/4 PIPE PLUG, BOTH ENDS
G1/8 PIPE PLUG,
G 1/8 PIPE PLUG,
3 PLACES
2 PLACES
METRIC MODELS
To Order
Models with G 1⁄8 and G 1⁄4 Female Pressure Connection, Specify Electrical Termination
DIFFERENTIAL PRESSURE
0 to 130 mbar 0 to 1.9 psi PXM82MB[*]-130mBARDI DP41-S, DP25B-S
0 to 190 mbar 0 to 2.8 psi PXM82MB[*]-190mBARDI DP41-S, DP25B-S
0 to 250 mbar 0 to 3.6 psi PXM82MB[*]-250mBARDI DP41-S, DP25B-S
0 to 370 mbar 0 to 5.4 psi PXM82MB[*]-370mBARDI DP41-S, DP25B-S
0 to 500 mbar 0 to 7.3 psi PXM82MB[*]-500mBARDI DP41-S, DP25B-S
0 to 750 mbar 0 to 11 psi PXM82MB[*]-750mBARDI DP41-S, DP25B-S
0 to 1.00 bar 0 to 15 psi PXM82MB[*]-001BARDI DP41-S, DP25B-S
0 to 1.25 bar 0 to 18 psi PXM82MB[*]-1.25BARDI DP451-S, DP25B-S
0 to 2.00 bar 0 to 30 psi PXM82MB[*]-002BARDI DP41-S, DP25B-S
Comes complete with 5-point NIST traceable calibration.
[*] Insert “0” for 1.2 m (4') cable, “1” for twist-lock connector or “6” for mini DIN connector
To order extra cable on cable-style models, add suffix “-(Total length in meters)M”
and additional price per meter beyond the standard length.
Ordering Examples: PXM82MD0-130mBARDI-10M, 130 mbar differential pressure
transmitter with 4 to 20 mA output and 10 m (32') cable.
PXM82MD1-001BARDI, 1 bar differential pressure transmitter with 4 to 20 mA output and
twist-lock connector. PT06F10-6S, mating connector (sold separately).
Visit omega.com/pxm82-i for Pricing and Details
RANGE MODEL NO.
COMPATIBLE METERS
B-265
Loading...