Omega Products PX80B0-1.5KD5T User Manual

INDUSTRIAL WET/WET DIFFERENTIAL
PRESSURE–HIGH OVERPRESSURE CAPACITY

STANDARD AND METRIC MODELS

0-30 to 0-5000 psi-Standard Models
0-2 to 0-350 bar-Metric Models
Differential Pressure
mV/V Output
0 to 5 Vdc Output
4 to 20 mA Output

1 bar = 14.5 psi
1 kg/cm2 = 14.22 psi
1 atmosphere = 14.7 psi = 29.93
inHg = 760.2 mmHg = 1.014 bar

STANDARD

PX80D1-030DV
shown
smaller than
actual size.

Twist-lock
style.

STANDARD

PX80B1-1.5KDV
shown smaller than
actual size.

PRESSURE TRANSDUCERS

DIFFERENTIAL

PX80/PXM80 Series

Standard

U Low Differential

Pressure at High Line
Pressure—1500 psi
(100 bar) Standard

U All Stainless Steel

Construction

U Sealed for Harsh

Environments

U Rugged Lightning-Protected

Housing Available, Style 5

B

Cable
style.

OMEGA’s PX80/PXM80 is a heavy-duty,
wet/wet, differential pressure transducer
that comes in ranges of 0-30 to
0-5000 psi (0-2 to 0-350 bar). Models
are available in any of 3 outputs: mV/V,
amplified 0 to 5 Vdc, or 4 to 20 mA.
All are suitable for interface with most
PLCs and computer-based control
systems. An extremely high overpressure
capacity of 1500 psi or 150% of capacity
(whichever is greater) makes the
PX80/PXM80 an extremely durable
transducer. The all stainless steel
construction and high overpressure
protection offer high reliability in harsh
industrial environments.

METRIC

PXM80MB0-140BARDI
shown smaller than
actual size.

B-268

DIFFERENTIAL PRESSURE
TRANSDUCERS

Style 5 sealed metal
terminal box most
ranges, visit omega.com
for details.

SPECIFICATIONS

mV/V Output

Electrical:

Excitation: 10 Vdc (15 V maximum)
Output: 2 mV/V nominal

Bridge Resistance: 350 Ω
Zero Balance: ±1% FSO

5 Vdc Output

Electrical:

Excitation: 24 to 32 Vdc
Output: 0 to 5 Vdc ±10% adj

Zero Balance: 0 V ±10% adj

4 to 20 mA Output

Electrical:

Excitation: 10 to 40 Vdc
Output: 4 to 20 mA ±0.8 mA adj

Max Loop Resistance:

(Input voltage – 12) x 50

Zero Balance: 4 mA ± 0.4 mA adj

COMMON SPECIFICATIONS

Performance:

Linearity: ±0.25% FSO
Hysteresis: ±0.10% FSO
Repeatability: ±0.1% FSO

Operating Temp Range:
mV/V: -73 to 163°C (-100 to 325°F)

Amplified: -46 to 107°C
(-50 to 225°F)

Compensated Temp Range:
mV/V: 17 to 71°C (60 to 160°F)

Thermal Effects:
Zero: 0.009% FSO/°C

(mV and 5V)
Zero:
Span: 0.009% rdg/°C

Pressure:
Line Pressure: 1500 psi (100 bar)

or 150% of rated pressure,
whichever is greater

Burst Pressure: 6000 psi
(414 bar) minimum

Wetted Parts: 17-4 PH stainless steel
and Buna-N O-ring

Pressure Port: See dimensional
drawings on following pages

Electrical Termination:
Style 0 = 3 m (10') cable

Style 1 = PTIH-10-6P (or equiv)
Style 5 = Metal terminal box
(4 to 20 mA output models only)

Style 6 = mini DIN

Mating Connector:
Style 1: PT06F10-6S

(sold separately)
Style 6: Mating connector
(included)

Weight: 5 lb

0.013% FSO/°C (4 to 20 mA)

STANDARD

PX80D5-050DI
shown smaller than

STANDARD AND METRIC

actual size.

CUSTOM CONFIGURATIONS

MODEL NUMBER SPECIFICATION:

PXM80D0-100DV-options

OUTPUT: V = 2 mV/V nominal
5T = 0 to 5 Vdc
I = 4 to 20 mA

psi

RANGES

METRIC bar

RANGES

To order extra cable on cable style models, add suffix “-(length in feet)FT” and add cost/ft beyond the standard 3 m (10') length.
Ordering Examples: PX80B5-1KDI, 1000 psid range model with 4 to 20 mA output and a lightning-protected amplifier housing

PX80D0-030DI-25FT, 30 psid range model, 4 to 20 mA output and 7.6m (25') cable.
PX80D1-200DV, 200 psid range model with mV/V output and twist-lock connector. PT06F10-6S, mating connector

(sold separately).

DIFFERENTIAL PRESSURE
RANGE IN psi FOR PX80; IN bar FOR PXM80
ELECTRICAL CONNECTION:

0 = 3 m (10') cable
1 = PTIH-10-6P connector or equiv.
5 = Metal terminal box (4 to 20 mA only)
6 = mini DIN connector
(no shunt)

PRESSURE PORT: D = PX80: 1/4-18 FNPT < 700 psi
PXM80: G1/4 <70 bar
B = PX80: 1/8-27 FNPT >1000 psi
PXM80: G1/8 ≥70 bar

HIGH LINE PRESSURE:
LP2K = 2000 psi
LP3K = 3000 psi

–

–

B-269

AR TWORK/PRODUCT AR T/ OMEGADYNE/OD-PX80SERIES

PX80-MV

mV/V OUTPUT STANDARD RANGES

mV/V Output
0-30 to 0-5000 psi
(0-2 to 0-350 bar)
Differential Pressure

Wiring Code
Pin Connection
Pin A +OUTPUT
Pin B –OUTPUT
Pin C –INPUT
Pin D +INPUT
Pin E SHUNT
Pin F SHUNT

DIM. "C"

PTIH-10-6P
OR EQU AL

38 DIA.

(1.5)

Dimensions:

mm (inch)

PRESSURE TRANSDUCERS

DIFFERENTIAL

PX80 Series

mV Models

Standard

U Low Differential

Pressure at High Line
Pressure—1500 psi
Standard

U All Stainless Steel

Construction

U Sealed for Harsh

Environments

U High Overpressure

CONNECTIONS mV/V
PIN Cable DIN

+Output A Green 2

-Output B White 3

-Input C Black GRND
+Input D Red 1
Shunt E Blue
Shunt F Orange

Style 1 Mating
Connector
PT06F10-6S
sold separately.

Dimensions: mm (inch)

Capacity A B C D

<1000 psi 111 (4.38) 76 (3.0) 49 (1.94) 75 (2.94)

≥1000 psi 76 (3.0) + Fitting 51 (2.0) 54 (2.13) N/A

STANDARD MODELS

To Order Visit omega.com/px80-5v for Pricing and Details

Models with mV Output and Integral Connector

RANGE MODEL NO. COMPATIBLE METERS*

0 to 30 psid 0 to 2.1 bar PX80D[*]-030DV DP41-S, DP25B-S
0 to 50 psid 0 to 3.4 bar PX80D[*]-050DV DP41-S, DP25B-S
0 to 100 psid 0 to 6.9 bar PX80D[*]-100DV DP41-S, DP25B-S
0 to 200 psid 0 to 13.8 bar PX80D[*]-200DV DP41-S, DP25B-S
0 to 300 psid
0 to 500 psid
0 to 700 psid
0 to 1000 psid
0 to 1500 psid
0 to 2000 psid
0 to 2500 psid
0 to 3000 psid
0 to 5000 psid

Comes complete with 5-point NIST traceable calibration.

Visit omega.com for compatible meters.

*

[*] Insert “0” for 3 m (10') cable, “1” for twist-lock connector, or “6” for mini DIN connector.
Ordering Examples: PX80D1-030DV, ±30 psid range differential transducer with 1⁄4-18

NPT pressure fittings, twist-lock electrical connector and mV/V output. PT06F10-6S, mating
connector (sold separately).
PX80B1-1KDV, ±1000 psid range differential transducer with 1⁄8-27 NPT pressure fittings, twist-
lock electrical connector and mV/V output.

HIGH LOW

0 to

20.7 bar PX80D[*]-300DV DP41-S, DP25B-S

0 to

34.5 bar PX80D[*]-500DV DP41-S, DP25B-S

0 to

48.3 bar PX80D[*]-700DV DP41-S, DP25B-S

0 to

68.9 bar PX80B[*]-1KDV DP41-S, DP25B-S

0 to

103 bar PX80B[*]-1.5KDV DP41-S, DP25B-S

0 to

138 bar PX80B[*]-2KDV DP41-S, DP25B-S

0 to

172 bar PX80B[*]-2.5KDV DP41-S, DP25B-S

0 to

207 bar PX80B[*]-3KDV DP41-S, DP25B-S

0 to

345 bar PX80B[*]-5KDV DP41-S, DP25B-S

B-270

DIM. "A"

DIM. "D"

DIM. "B"

1/8-27 NPT (0-1000 THR U 0-5000 psid)
1/4-18 NPT (0-1 THR U 0-700 psid)
PRESSURE POR T : 3 PLA CES , BOTH ENDS

B