Omega Products PX40 Installation Manual

OMEGA

PX40

SERIES

MINIAT

PRESSl

URE VOLTAGE OUTPUT

JRE SENSORS

SPECIFICATIONS

Excitation: Output Source Current: 0.5 Output Sink Current: 1 .O Hysteresis Span:

mmHg

60 o-15 o-1 00 O-150

O-250

Null:

mmHg

*50 o-15 O-100 o-1 50

O-250

0.25

Repeatability: 0.15% FS

4.00

2.50

0.50

Vdc

Vdc Typ kO.11

Vdc

iO.09 +0.07

Vdc

kO.07

Vdc

20.05

Vdc

kO.11

Vdc

kO.04

Vdc

iO.04

Vdc

kO.04

Vdc

M-354411 199

max

Operating Temp.: -45 to 125°C (-49 to 257°F)

Compensated (32 to 158°F); (0 to

Overpressure:

mmHg

-c50 o-1 5 o-1 00 o-1 50

O-250

Response Time: 1 ms Gage Type: Silicon Media Compatibility: Limited to those

media which will not attack invar, copper, silicon, stainless and solder: i.e. air, water, engine fuel

Weight: 5 g

Temp.:0

&170 45 psi 200 psi 300 psi

500

(.18

50°C

mmHg

psi

)

to 70°C

mmHg)

for

stee!,

glass

refngerants,

ELECTRICAL

NOTES:

1. Square

Output is short circuit protected.

CONRECTION

+vs

comer marks pin

(Vs).

ELECTRICAL CONNECTION

.“.

(1)

Dimensions In Inches (mm)

\-PIN1

WARRANTY/DISCLAIMER

‘OMEGA ENGINEERING, INC.

workmanship for a period of 13 months from date of purchase. OMEGA Warranty adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA ’s coverage on each product.

If the unit malfunctions, it must be returned Service Department will issue an Authorized Return (AR)

written request. Upon examination by OMEGA, if the unit

repaired or replaced at no charge. OMEGA ’s from any action of the purchaser, interfacing, operation

outside of design

modification. This WARRANTY is VOID if the unit shows evidence of having been tampered

with or shows evidence of having been current, heat, moisture or vibration; operating conditions outside of OMEGA ’s control. Components which wear are not warranted, including but not limited to contact

OMEGA

However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that accordance with information provided by OMEGA, either verbal or written. OMEGA

warrants only that the parts manufactured by it

defects. OMEGA MAKES NO OTHER KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT IMPLIED WARRANTIES INCLUDING ANY FITNESS FOR A PARTICULAR PURPOSE

LIABILITY:

liability of OMEGA with respect to this order, whether based on contract, warranty, exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.

is pleased to offer suggestions on the use of its various products.

The remedies of purchaser set forth herein are exclusive, and the total

negligence, indemnification,

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1)

as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or

activity; or (2) in medical

apglications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY

DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in

such a manner.

warrants this unit to be free of defects

customers

to the factory for evaluation.

number immediately upon phone or

is found to be defective, it

WARRANTY does not apply

in materials and

receive maximum

OMEGA’s Customer

to defects resulting

including but not limited to mishandling,

limits,

damaged

improper specification; misapplication;

points,

improper

result of excessive corrosion; Or

fuses, and

repair,

triacs.

or unauthorized

result from the use of its

will be as specified and

WARRANTIES OR REPRESENTATIONS OF

THAT OF TITLE,

WARRANTY OF MERCHANTABILITY

ARE HEREBY DISCLAIMED. LIMITATION

strict liability or otherwise,

will be

improper

misuse or other

products in

free of

ANY

AND ALL

AND

shall not

RETURN REQUESTS

INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN

AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT

(IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR

marked on the outside of the return package and on any correspondence.

The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage

FOR WARRANTY RETURNS, please have the following information

available BEFORE

1. Purchase Order number underwhich the product was PURCHASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specific problems relativeto the product.

OMEGA ’

possible. This affords our customers the latest in technology and engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC. Q Copyright 1999 OMEGA ENGINEERING, INC. All rights reserved. This document may not be

photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form,

in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.

policy is to make running changes, not model changes, whenever an improvement is

in transit.

contacting OMEGA:

FORflON-WARRANlY forcurrent repaircharges. Have the following

information available BEFORE contacting OMEGA:

PurchaseOrder

COSTof

Modeland

3. Repairinstructions and/or specific problems relativeto the product.

the repair,

serialnumberofthe product and

number should then

REPAIRS,

numbertocoverthe

consuttOMEGA

copied,