Omega Products PX35D0-020GV User Manual

PREMIUM TEMPERATURE COMPENSATION
FM
APPROVED
3 m (10') 4-COND PTFE
10
(0.39)
16
(0.625)
32
(1.25)
32
(1.25)
19
(0.75)
HEX
62
(2.43)
MAX
1/4-18 NPT
SHIELDED CABLE
3/8-18 NPT
PRESSURE TRANSDUCER
STANDARD AND METRIC MODELS
PX35/PXM35 Series
mV/V Output 0-15 to 0-30,000 psi-Standard Units 0-1 to 0-400 bar-Metric Models
1 bar = 14.5 psi 1 kg/cm2= 14.22 psi 1 atmosphere = 14.7 psi = 29.93 inHg = 760.2 mmHg = 1.014 bar
Starts at
$
360
Standard
FM Approved Intrinsically
Safe—Standard
All Stainless Steel
Construction
5-Point Calibration
Standard
Available in Gage, Sealed
The OMEGA PX35/PXM35 are high-accuracy, millivolt output, industrial pressure transducers. They can be ordered with a hermetically sealed gage, making them suitable for the harshest environments. Both units are available in gage, sealed gage, and absolute models. Three meters (10') of 4-conductor shielded cable is standard. A twist-lock-connector electrical termination is also available.
STANDARD
PX35D0-1KGV, $360, shown actual size.
thread.
PIN A GREEN +OUTPUT B WHITE -OUTPUT C BLACK -INPUT D RED +INPUT E– N/C F – N/C
SPECIFICATIONS
Excitation: 10 Vdc (15 V max) Output: 3 mV/V nominal Accuracy: 0.25% linearity, hysteresis
and repeatability combined
Zero Balance: ±2.0% FSO Input Resistance: 350 Ω min Output Resistance: 315 to 530 Ω Agency Approvals: FM Intrinsically
Safe; IS/I.II.III/1/CDEFG, standard
Operating Temp Range:
-73 to 149°C (-100 to 300°F)
1
4 NPT
WIRING CODE
G1⁄4 thread.
B-39
63.5 (2.5)
MAX
3
8 NPT
Conduit
fitting.
METRIC
PXM35D1-200AV, $360, shown actual size.
Model A Thread B Hex
PX35 PXM35 G
*
15.9
(0.625
Compensated Temp Range:
16 to 71°C (60 to 160°F)
Thermal Effects:
Span: 0.0054% rdg/°C Zero: 0.008% FSO/°C
Proof Pressure:
150% of rated pressure
Burst Pressure:
300% of rated pressure
Wetted Parts: 17-4 PH stainless steel Pressure Port: See dimensional
drawing above
Electrical Connection:
3 m (10') 4-conductor cable standard, or PTIH-10-6P
10,000 psi.
31.8
(1.25)
1
4 NPT*
1/4 HP tube fitting for ranges
31.8
(1.25)
A
19 (0.75)
1
21 (0.83)
4
B
HEX
TEMPERATURE COMPENSATION PRESSURE TRANSDUCER
STANDARD CUSTOM CONFIGURATIONS
PX35 PRESSURE ELECTRICAL RANGE SERIES PORT CONNECTION (PSI) UNITS OUTPUT OPTIONS
1
C = D = 1⁄4-18 NPT-F no charge J = 7⁄16-20 UNF-M +$20 K = 7⁄16-20 UNF-F no charge S = 1⁄4 HP tube fitting
as shown (ranges 10,000 psi)
See page B-12 for additional options including extended compensated temperatures.
Ordering Examples: PX35K1-300GV, 300 psi gage pressure transducer with $360 + 20 = $380. PT06F10-6S, mating connector (sold separately), $26.50.
PX35S1-15KGV, 15,000 psi gage pressure transducer with PT06F10-6S, mating connector (sold separately), $26.50.
[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]
A, G, S
, G, S
A A, G, S A, G, S A, G, S A, G, S
V = mV/V Base price PX35D
$360 1000 psi $425 >1000 psi
A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S
* 9⁄16-18, 1⁄4" HP tube connection
A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S
7
-20 UNF female connection and PTIH-10-6P connector,
16
1
-18,
" HP tube connection and PTIH-10-6P connector, $425 + 20 = $445.
16
4
To order a custom configuration:
1. Select a pressure port
2. Select electrical connection
3. Select a pressure range
4. Select pressure units – absolute gage
or sealed gage
5. Select output
6. Select options and agency approvals
4-18 NPT-M +$20
0 = 3 m (10') cable (std)
$4.50 (ft) over 3 m (10')
1 = PT1H-10-6P connector
(or equal, no charge). Mating connector (sold separately), order
PT06F10-6S $26.50
10 15 20 25 30 50 75 100 150 200 250 300 500 750 1K 1K 2K
2.5K 3K
3.5K 5K
7.5K 10K* 15K* 20K* 30K*
9
OX = Cleaned for
oxygen service +$75 plus 2 weeks
PRESSURE TRANSDUCERS
MILLIVOLT OUTPUT
B
G1⁄4 Pressure Snubbers: $12.75
PS-4G-MG = Gas PS-4E-MG = Lt Oil PS-4D-MG = Dense
Liquid
1
4 NPT Pressure
Snubbers: $12.75
PS-4G = Gas PS-4E = Lt Oil PS-4D = Dense Lq
METRIC CUSTOM CONFIGURATIONS
PXM35 PRESSURE ELECTRICAL RANGE SERIES PORT CONNECTION (BAR) UNITS OUTPUT OPTIONS
MB = G MD = G1⁄4B Female no charge
See page B-12 for additional options including extended compensated temperatures.
Ordering Examples: PXM35MB0-010BARSV, 10 bar sealed gage pressure transducer with G termination, $360.
PXM35MD1-010BARAV, 10 bar absolute pressure transducer with G mating connector (sold separately), $26.50.
[ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ]
1
8B Female no charge
0 = 3 m (10') cable (std)
$15/m over 3 m (10')
1 = PTIH-10-6P connector
(or equal, no charge). Mating connector (sold separately), order
PT06F10-6S $26.50
1.0
1.6
2.5
4.0
6.0 10 16 25 40 60 100 160 250 400
A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S A, G, S
V = mV/V Base price PXM35
$360 <100 bar $425 100 bar
To order a custom configuration:
1. Select a pressure port
2. Select electrical connection
3. Select a pressure range
4. Select pressure units – absolute, gage
or sealed gage
5. Select output
6. Select options and agency approvals
1
B female connection and 3 m (10') cable
8
1
B female connection and twist-lock connector, $360. PT06F10-6S,
4
OX = Cleaned for
oxygen service +$75 plus 2 weeks
B-40
Loading...
+ 2 hidden pages