HIGH-ACCURACY MELT
PRESSURE TRANSDUCERS
PX340-1000GV,
PX330-500GV,
$650.
$635.
PX360-3KGV,
$705.
PX351-3KGV,
$870.
All models shown
smaller than
actual size.
PX330 Series
Starts at
$
635
†
Optional
⻬ 88.9, 152.4, and 304.8 mm
(31⁄2, 6, and 12") Barrels;
Heavy-Duty Stainless
Steel Construction,
Adaptable to a Wide
Range of Space
Requirements
⻬ 0.5% FS and 1% FS
Accuracy Models
⻬ Force Rod Construction,
No Fill Fluid to
Contaminate System
⻬ High-Temperature
Design—399°C (750°F)
at the Diaphragm to Work
with Today’s Higher
Extrusion Temperatures
PX335-10KGV, $750, 152.4 mm
(6") barrel, shown much smaller
than actual size.
⻬ Fits Standard
Sensor Wells
⻬ Calibration Sheet
Supplied with Each
Transducer
⻬ Rupture-Resistant
Diaphragms in 17-4 PH
Stainless Steel,
Hastelloy C-276, and
Hard Chrome Plate
† Refer to the footnote on page
B-286 for NIST calibration
ordering information.
B-283
PX341-5KGV, $720, 304.8 mm
(12") barrel, shown much
smaller than actual size.
WK6-21C-1/4
mating connector,
$45, sold
separately.
PX350-1500GV, $750,
88.9 mm (31⁄2") barrel for
limited space areas, shown
smaller than actual size.
MELT TRANSDUCERS FOR ABRASIVE, NON-ABRASIVE,
45°
1
/2-20 N.F.
10.9
(27/64)
7.9 (5/16)
6.35 (1/4)
9.5 (3/8)
25.4
(1)
13.1
24-Gage 4-Conductor Cable
PTFE Insulated & Shielded
3 m (10') Long
Assembly Sold Separately
THERMOCOUPLE
CABLE
MA T ING
CONNECT OR
OMEGA
WK6-21C-5/16
WK6-32S
22.2 (0.875)
HEX
THREAD SIZE
1/2-20 UNF-2A
22.2 (0.875) DIA.
DIA.
45 CHAMFER
D
B
C
DIA.
5.4 (0.213)
5.4 (0.213)
BARREL
LENGTH
A B C D
92
(3.62)
150
(6.00)
12.7
(0.50)
47
(1.85)
152.4
(6.00)
241.3
(9.50)
12.7
(0.50)
44.45
(1.75)
304.8
(12.00)
393.7
(15.5)
15.88
(0.625)
69.85
(2.75)
88.9
(3.50)
152.4
(6.00)
304.8
(12.00)
SHIELD
A
12.19
(0.48)
10.51 (0.414)
10.46 (0.412)
7.80 (0.307)
7.75 (0.305)
CORROSIVE, AND NON-CORROSIVE MATERIALS
OMEGA is proud to feature stateof-the-art melt pressure transducers
for general purpose and precision
requirements. We also offer digital
indicator/controllers, thermocouples,
accessory cables, and connectors
for plastic extrusion.
Our transducers have been
selected for applications with
abrasive, non-abrasive, corrosive,
or non-corrosive material. They
offer a choice of 1% or 0.5%
accuracy, and they feature stainless
steel barrels in 3 lengths to meet
the space requirements imposed by
complex machinery, piping, and
insulation.
Models 330, 335, 340, 341, 370,
371. Offered in 88.9, 152.4, and
304.8 mm (31⁄2, 6, and 12") barrel
lengths, these transducers feature
a 17-4 PH stainless steel diaphragm
for melt pressure usage with
non-corrosive and non-abrasive
materials; ±1% FS non-linearity
(models 330, 340, 341) for general
purpose applications; ±0.5% FS
non-linearity (models 335, 370, 371)
for high accuracy; and a -17.7 to
399°C (0 to 750°F) operating range.
Models 350, 351, 380, 381 are
offered in 6" and 12" units with
Hastelloy C-276 diaphragm for melt
pressure usage with corrosive
materials such as PTFE, PVDF,
and fluorocarbon polymers. These
transducers also feature ±1% FS
non-linearity (models 350, 351)
for general purpose applications;
±0.5% FS non-linearity (models
380, 381) for high accuracy; and a
-17.7 to 399°C (0 to 750°F)
operating range.
Models 360, 361, 390, 391 are
offered in 152.4 and 304.8 mm
(6 and 12") units with hard chrome
plate diaphragm for melt pressure
usage with abrasive materials such
as fiberglass, aluminum, and cereal.
These transducers also feature
±1% FS non-linearity (models
360, 361) for general purpose
applications; ±0.5% FS
non-linearity (models 390, 391)
for high accuracy; and a -17.7 to
399°C (0 to 750°F) operating range.
Built-In Thermocouples.
Models with OMEGA’s
Type J (Iron-Constantan) or K
(CHROMEGA®-ALOMEGA®) highaccuracy thermocouples enable
simultaneous temperature/pressure
measurements up to 399°C (750°F).
These transducers are designed for
applications in which precision
control is critical and where space
for only one sensor is available.
S
t
a
n
d
a
r
d
Me
l
t
l
T
i
p
F
i
t
s
E
x
t
r
u
d
e
r
s
Mo
B
a
r
r
e
s
t
Recommended Well Dimensions
PRESSURE TRANSDUCERS
SPECIALTY
B
B-284
Dimensions: mm (in)