Omega Products FSW-142 User Manual

INDUSTRIAL STRENGTH IN-LINE
FLOW
25 (1)
19
(0.75)
Across Flats
11
(0.43)
Diameter Typical
107
(4.22)
¼" Quick Disconnect Male Adaptor See next page for adaptor model numbers.
PLASTIC FLOW SWITCH
FSW-140 Series
U Preset Switch Points,
0.07 to 2.00 GPM
U ³⁄₈ NPT Male or
U Chemical Resistant
Polypropylene
U For Low Viscosity Liquids
The FSW-140 Series rugged inline flow switches offer superior performance. Their fixed set-point and simple design make it a dependable switch. This series is an ideal choice for coolant applications requiring reliable flow detection in HVAC, semiconductor, welding, medical and other industries. The ¹⁄₄" quick disconnect units have a host of snap-on mating adaptors available to fit most piping requirements.
SPECIFICATIONS
Wetted Materials: Housing: Glass reinforced
polypropylene
Piston: PPS composite Spring: 316 stainless steel O-Ring: Fluorocarbon Operating Pressure:
8.6 bar (125 psi) @ 21°C (70°F)
3.4 bar (50 psi) @ 100°C (212°F) Operating Temperature: -18 to 100°C (0 to 212°F)
Set Point Accuracy: 20% of set point Set Point Differential: 20% maximum Switch: SPST, 10VA, normally open at
no flow Electrical Termination: 610 mm (24") polymeric leads, 22 AWG
Filtration: 100 micron
FSW-142 plastic flow switch.
Both models shown actual size.
FSW-143-QD quick disconnect plastic flow switch
³⁄₈" NPT Port
25 (1)
19
(0.75)
Across Flats
¼" Quick Disconnect Male Adaptor See next page for adaptor model numbers.
25 (1)
19
(0.75)
Across Flats
11
(0.43)
Diameter Typical
K-1
¹¹⁄₁₆" HEX
K
FLOW
102
(4)
¹¹⁄₁₆" HEX
FLOW
107
(4.22)
Dimension: mm (inch)
Both models
shown actual size.
SPECIFICATIONS
Thermoplastic Quick Couplings
Working Pressure:
Vacuum to 120 psi (8.3 bar) Operating Temperature:
-40 to 82°C (-40 to 180°F) continuous
Materials: Bodies and Valves: Acetal Internal Spring: 316 Stainless Steel External Springs, Pin, Latch:
Stainless Steel Seals:
Buna, others available
Color: Natural white, others available Tubing Sizes:
1
4 thru 3⁄8" ID, 1⁄4 and 3⁄8" OD
6 x 4 mm thru 12 x 8 mm (OD x ID)
To Order Visit omega.com/ft-plc_14 for Pricing and Details
PIPE THREAD
IN LINE, Streamline Design
OD x ID EQ mm MODEL NO. MODEL NO. LENGTH
¹⁄₄ x 0.170" 6 x 4.3 FT-PLC130-04 FT-PLCD130-04 1.82"
MALE THREAD MODEL NO. MODEL NO. LENGTH
¹⁄₄ NPT FT-PLC100-04 FT-PLCD100-04 1.15" ³⁄₈ NPT FT-PLC100-06 FT-PLCD100-06 1.15"
¹⁄₄ BSPT FT-PLC100-04BS FT-PLCD100-04BS 1.15"
5
" Hex
8
³⁄₈ BSPT FT-PLC100-06BS FT-PLCD100-06BS 1.15"
Ferruless Polytube Fitting
TUBING SIZE METRIC STRAIGHT THRU SHUTOFF
— — 8 x 6 FT-PLC130-M8 FT-PLCD130-M8 1.95"
¹⁄₄" ID 6.4 ID FT-PLC170-04 FT-PLCD170-04 1.95"
³⁄₈ x 0.250" 9.5 x 6 FT-PLC130-06 FT-PLCD130-06 1.95"
— 10 x 8 FT-PLC130-M10 FT-PLCD130-M10 1.95"
Hose Barb
⁵⁄₁₆" ID 7.9 ID FT-PLC170-05 FT-PLCD170-05 1.95"
³⁄₈" ID 9.5 ID FT-PLC170-06 FT-PLCD170-06 1.95"
FT-PLC170-04
STRAIGHT THRU SHUTOFF
††
FT-PLC100-04
Acetal and chrome-plated brass coupling halves interchange. Visit omega.com/rohs to determine specific RoHS compliance.
PTF fittings are designed for semi-rigid tubing, i.e. polyethylene, nylon etc. and polyurethane tubing.
††
To Order Visit omega.com/fsw-140 for Pricing and Details
Quick Disconnect
Model No. Description Model No. Description
FSW-141 Set point = 0.07 GPM ³⁄₈ NPT FSW-141-QD Set point = 0.07 GPM quick disconnect* FSW-142 Set point = 0.15 GPM ³⁄₈ NPT FSW-142-QD Set point = 0.15 GPM quick disconnect* FSW-143 Set point = 0.25 GPM ³⁄₈ NPT FSW-143-QD Set point = 0.25 GPM quick disconnect* FSW-144 Set point = 0.5 GPM ³⁄₈ NPT FSW-144-QD Set point = 0.5 GPM quick disconnect* FSW-145 Set point = 1.0 GPM ³⁄₈ NPT FSW-145-QD Set point = 1.0 GPM quick disconnect* FSW-146 Set point = 1.5 GPM ³⁄₈ NPT FSW-146-QD Set point = 1.5 GPM quick disconnect*
FSW-147 Set point = 2.0 GPM ³⁄₈ NPT FSW-147-QD Set point = 2.0 GPM quick disconnect*
* Fittings sold separately, see char t above.
Comes complete with operator’s manual
Ordering Examples: FSW-143, 0.25 GPM, plastic flow switch with FSW-146-QD, 1.5 GPM plastic flow switch with quick disconnect, two FT-PLC170-04,
3
NPT connections.
8
K-2
1
" ID hose barb/quick disconnect fittings.
4
Loading...