Omega Products FMG803 User Manual

PLASTIC BODIED ELECTROMAGNETIC FLOWMETER
FMG800 Series
U No Moving Parts U Minimal Straight
Pipe Required
U Battery or DC Powered U Built-In Rate and
Total Indicator
U Corrosion Resistant U Pulse Output
(FMG810 Only)
U US Gallons
Factory Programmed (Other Engineering Units Available)
The FMG800 Series is a full-bore, plastic-bodied electromagnetic flowmeter designed for flow and usage monitoring applications in 1, 2 and 3 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals and fertilizers. It is light weight and easy to install or remove from the pipe for inspection*.
With no moving parts, the magmeter permits unobstructed flow, minimizing flow disturbances and straight pipe requirements. The FMG800 Series can be used in piping configurations where there is little space between the meter and an elbow or valve. The FMG800 Series is resistant to wear from sand and debris found in ground or surface water. Since there are no bearings or propeller to wear out, maintenance and repair costs are kept to a minimum and it tolerates high flows without damage.
A hinged polyethylene cover is included that protects from dust and UV rays, while permitting easy access to the flow rate and total display. Flow rate and total can be displayed in a variety of units, factory programmed.
The FMG800 Series is used for tracking flow rate and total flow in usage monitoring applications including wells, industrial wastewater, heap leach mining discharge, cooling tower deduct, turf, landscape, and other water reclamation applications. In the event of DC power loss, or when changing batteries, the FMG800 will retain internal settings and flow total.
The FMG810 Series is externally powered via a 5-pin connector cable which also provides pulse output for use with a variety of Omega displays and controls for remote reading, data logging, pulse-to-analog conversion, and telemetry applications.
The FMG800 Series is a battery­operated unit for use when pulse output is not required. The batteries are user replaceable with an approximate 1 to 2 year life depending on usage.
*Includes Omega NPT fitting kit on
2 and 3" models.
SPECIFICATIONS
Pipe Size: 1, 2 or 3" full port Fittings: 1 NPTF, 2 or 3" flange clamps
with 2 or 3 NPTF fitting kit Pressure: 150 psi or 10.3 bar working pressure @ 21ºC (70ºF) Operating Temperature Range:
-12 to 54ºC (10 to 130ºF), -40 to 80ºC (-40 to 176ºF) non-operating
FMG802
All shown smaller than actual size.
Accuracy:
±1% of reading (between 10% and 100% of maximum flow) ±3% of reading (between cutoff and 10% of maximum flow)
Flow Range Minimum: 1": 2.3 GPM (0.145 LPS)
2": 6 GPM (0.38 LPS) 3": 14 GPM (0.88 LPS)
Flow Range Maximum: 1": 110 GPM (6.94 LPS)
2": 300 GPM (18.9 LPS) 3": 670 GPM (42.3 LPS) Materials Body: Glass-filled polypropylene
Electrodes: 316 stainless steel Electronics Housing: Die-cast
aluminum, powder-coated
Display Cover: Polyethylene Display Digits: Rate-6, Total-8 Units Rate: Gallons/Minute, Cubic Feet/
Second, Acre-Feet, Acre-Inch, Gallons, Gallons x 1000, Cubic Feet/Minute, Liters/Second Units Total: Cubic Feet, Liters, Mega-liters, Cubic Metersm Liters/Minute, Cubic Meters/Minute
H-1
FMG803
FMG801
H
51 (2) Model
25 (1) Model
109
140 (5.5)
185 (7.3)
117
(4.62)
117
(4.62)
241
(9.50)
83 (3.25) 51 (2.00)
52
153 (6.03)
273
(10.75)
112 (4.40)
76 (3.00)
185
(7.30)
76 (3) Model
76 (3) Model
51 (2) Model
185 (7.3)
117
(4.62)
273
(10.75)
112 (4.40)
76 (3.00)
185
(7.30)
67
(2.62)
76 (3) Model
(4.3)
25 (1)
140 (5.5)
116
(4.55)
223
(8.8)
137
(5.38)
117
(4.62)
83 (3.25) 51 (2.00)
140 (5.5)
241
(9.50)
117
(4.62)
112 (4.40)
76 (3.00)
185 (7.3)
273
(10.75)
153 (6.03)
41 (1.63)
52
(2.03)
Dimensions: mm (inch)
Alternate Programming Unit Suffixes
Total Rate Acre-feet Acre-inch Gallons Gallonsx1000 Feet^3 Liters Megaliters Meters^3
Gallons/Min -GMAF -GMAI (standard) -GMKG -GMCF - - ­ Feet^3/Sec -CFSAF -CFSAI -CFSG -CFSKG -CFSCF - - ­ Feet^3/Min -CFMAF -CFMAI -CFMG -CFMKG -CFMCF - - ­ Liters/Sec - - - - - -LSL -LSML -LSCM Liters/Min - - - - - -LML -LML -LMCM Meters^3/Min - - - - - -CMML -CMMML -CMMCM
Power: FMG800: 6 each “AA” alkaline cells
(included), replaceable. Estimated life is 1 to 2 years depending on usage FMG810: 10 to 30 Vdc @ 60 mA maximum (15 mA average)
NOTE: Using an unregulated power
supply >18 Vdc may damage the meter due to AC line input voltage fluctuation
Pulse Output (FMG810 Only): Signal: Current sinking pulse,
opto-isolated, 32 Vdc maximum at 10 mA maximum Standard Pulse Rate: 1 unit/pulse out, pulse width of 10 ms depending on unit selection High Frequency (-HF): Pulse width
1.1 ms, minimum/maximum frequency, 3 to 150 hz
Pulse/Unit: 1" = 80, 2" = 30, 3" = 13 Empty Pipe Detection: Hardware/
software, conductivity-based
Conductivity: >20 micro Siemens/cm Environmental: NEMA 4X standard Electrical Connection (FMG810 Only):
5-pin male circular with 6 m (20') cable
To Order Visit omega.com/fmg800 for Pricing and Details
Model No. Description FMG801 1" battery powered magmeter FMG802* 2" battery powered magmeter FMG803* 3" battery powered magmeter FMG811 1" DC powered magmeter FMG812* 2" DC powered magmeter FMG813* 3" DC powered magmeter FMG811-HF 1" DC powered magmeter high frequency out FMG812-HF* 2" DC powered magmeter high frequency out FMG813-HF* 3" DC powered magmeter high frequency out
* Includes NPT fitting kit.
For displays programmed in other engineering units use suffix chart above.
Accessories Model No. Description FTB700-T Remote 4 to 20 mA transmitter for wall mount FTB700-D Remote rate and total display for wall mount FMG-800-CABLE Replacement 6 m (20') cable
Comes complete with operator’s manual. All 2 and 3" models include NPT fitting kit. All battery powered units include 6 “AA” alkaline batteries. All DC powered units include 6 m (20') cable
Ordering Example: FMG811, 1" DC powered magmeter.
H-2
(7.30)
67
(2.62)
185
Loading...