The FMG600 Series electromagnetic
flowmeters are designed for
measurement of conductive liquids.
With no moving parts and a PTFE
lining, they can handle applications
involving wastewater, pulp, food,
and slurries. Standard outputs
include analog, frequency, and
RS485 communications. Optional
sanitary tri-clamp mounting allows
use of the FMG600 flowmeters in
applications not previously open to
magmeters. Local- and remotedisplay models are available.
MG603347625 (1)79150# ANSI flange magmeter with empty pipe detection
F
1
)11SS sanitary mount magmeter with empty pipe detection
⁄
2
1
)11SS Sanitary mount magmeter with empty pipe detection and remote display
⁄
2
3
)52150# ANSI flange magmeter with empty pipe detection
⁄
4
3
)52150# ANSI flange magmeter with empty pipe detection and remote display
⁄
4
3
)31SS sanitary mount magmeter with empty pipe detection
⁄
4
3
)31SS sanitary mount magmeter with empty pipe detection and remote display
⁄
4
FMG603-R405925 (1)79150# ANSI flange magmeter with empty pipe detection and remote display
FMG603-S427625 (1)61SS sanitary mount magmeter with empty pipe detection
FMG603-S-R486725 (1)61SS sanitary mount magmeter with empty pipe detection and remote display
For units with switchable 115/230 Vac power, add “-VAC” to the model number and subtract $100 from the price.
For empty pipe detection on units 2" and larger, add “-EPD” to the model number and add $300 to the price.
For units with a batching option, add “-B” to the model number and add $320 to the price.
For units with tantalum electrodes, add “-TE” to the price and add $490 to the price.
If a third tantalum grounding electrode is needed, add “-TGE” to the model number and add $250 to the price.
If a third hastelloy grounding electrode is needed, add “-HGE” to the model number and add $200 to the price.
For a 4-point NIST calibration, add “-NIST4” to the model number and add $520 to the price.
For a 10-point NIST calibration, add “-NIST10” to the model number and add $1040 to the price.
Comes complete with operator’s manual and 3-point NIST calibration certificate.
Ordering Examples: FMG606-R-EPD, 2", 150# flange mount magmeter with remote electronics and empty pipe detection, $4233 + 300 = $4533.
FMG605-NIST4, 150# flange mount magmeter with optional 4-point NIST calibration, $3529 + 520 = $4049.
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.