ISO 9001 CertifiedOne Omega Drive, River Bend Technology Centre, Northbank
Irlam, Manchester M44 5BD United Kingdom
Toll-Free: 0800-488-488TEL: +44 (0) 161 777-6611
FAX: +44 (0) 161 777-6622e-mail: sales@omega.co.uk
It is the policy of OMEGA Engineering, Inc. to comply with all worldwide safety and EMC/EMI
regulations that apply. OMEGA is constantly pursuing certification of its products to the European New
Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.
The information contained in this document is believed to be correct, but OMEGA accepts no liability for any
errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, human applications.
Air Velocity/Temperature Transmitter and Indicator
7Typical Data File ................................................................................. 5-3
8 Settings Menu ..................................................................................... 5-4
ii
Section 1 - Package Inspection
Remove the packing list and verify that you have received all your equipment. If
you have any questions about the shipment, please call our Customer Service
Department at 1-800-622-2378 or 203-359-1660. We can also be reached on the
Internet at omega.com, e-mail: cservice@omega.com. When you receive the
shipment, inspect the container and equipment for any signs of damage. Note
any evidence of rough handling in transit. Immediately report any damage to
the shipping agent.
The carrier will not honor any damage claims unless all shipping material is
saved for inspection. After examining and removing contents, save packing
material and carton in the event reshipment is necessary.
Included Items
The following items are supplied with the FMA1000 air velocity transmitter:
Package Inspection
NOTE:
1
• FMA1000 air velocity/temperature transmitter
• 15 feet shielded Power/Output cable with 10 pin female mating connector
with 6 feet shielded USB cable with female mating connector
• Instruction Manual
• PC application program CD
The following items are optional accessories that can be ordered separately:
Model No.Description
PSR-24SRegulated +24 Vdc @ 400 mA power supply, screw
terminal
PSR-24LRegulated +24 Vdc @ 400 mA power supply, stripped
TX8-1008 conductor shielded cable, 24 AWG, 30m long
1
⁄4" PTFE Ferrules (10 per pack) for use with SSLK14-14
1-1
CAUTION & SAFETY INFORMATION
If the equipment is used in a manner not specified in this manual, the protection
provided by the equipment may be impaired.
The installation category is one (I).
The output terminals of this product are for use with equipments (Digital
meters, chart recorders, etc.) which have no accessible live parts. Such
equipment should comply with all the applicable safety requirements.
Avoid contact with Hazardous live parts.
Do not operate the equipment in flammable or explosive environments.
The equipment comes with a 4.6 m (15') shielded multi-conductor power/
output cable. This cable is an ten conductor 26 AWG stranded wire cable with
rating of 300 Vdc, 105ºC (221ºF) PVC insulation. It also comes with a 2m (6')
shielded USB + Four conductor cable.
Power must be disconnected before making any electrical connections.
The supply voltage to the equipment should not exceed 24 Vdc.
The recommended power supply should be VDE or UL approved. Rating of 15
to 24 Vdc @ 150 mA minimum power with overload protection, current limited
to 500 mA.
There is no user replaceable fuse in this product.
The FMA1000 series passed all the EMC standards (EN61326 Emissions &
EN61000 immunity) under normal mode of operation using the power/output
cable provided and an external DC power supply.
1-2
Section 2 - Introduction
The FMA1000 series industrial air velocity/temperature transmitter/indicator
measures and displays air velocity mass flow and air temperature of clean air
flows in ducts & pipes, while producing very little pressure drop in the flow
stream. The FMA1000 series can be used in research & development labs, HVAC
applications, and other manufacturing processes. The sensor design is based on
three RTD elements, one measures the air temperature and the other two
measure the air velocity. The air velocity is measured based on the heat loss from
the RTD velocity sensor as it cools down by the air flow.
The FMA1000 series offers many standard features such as dual display of air
velocity & temperature, two analog outputs corresponding to air velocity &
temperature, high & low voltage alarm outputs for air velocity, USB PC interface
with a Windows based PC interface software. The FMA1000 displays the air
velocity in feet per minute (FPM), meter per second (m/s), miles per hour (MPH),
and kilometer per hour (Km/h). The air temperature is displayed in ºF & ºC.
The sensor probe is 12" long as standard. The 304 Stainless steel sensor tubing is
provided with inch marks for ease of insertion depths. The sensor probe comes
in four different versions as follows:
Introduction
2
• Fixed probe mount
• Right angle probe mount
• Remote probe
• Fixed short probe, 3.75" Long
2-1
2
Introduction
The following table shows all the air velocity/temperature transmitter model
numbers:
Model No.Velocity Range FPM (m/s)Probe TypeTemperature Measurment Range
FMA1001A-*Fixed Probe-40 to 121°C (-40 to 250°F)
FMA1001A-*-HT-40 to 171°C (-40 to 340°F)
FMA1001B-*0-1000 (0-5.1)Right Angle Probe-40 to 121°C (-40 to 250°F)
FMA1001B-*-HT-40 to 171°C (-40 to 340°F)
FMA1001R-*Remote Probe-40 to 121°C (-40 to 250°F)
FMA1001R-*-HT-40 to 171°C (-40 to 340°F)
FMA1002A-*Fixed Probe-40 to 121°C (-40 to 250°F)
FMA1002A-*-HT-40 to 171°C (-40 to 340°F)
FMA1002B-*0-5000 (0-25.5)Right Angle Probe-40 to 121°C (-40 to 250°F)
FMA1002B-*-HT-40 to 171°C (-40 to 340°F)
FMA1002R-*Remote Probe-40 to 121°C (-40 to 250°F)
FMA1002R-*-HT-40 to 171°C (-40 to 340°F)
FMA1003A-*Fixed Probe-40 to 121°C (-40 to 250°F)
FMA1003A-*-HT-40 to 171°C (-40 to 340°F)
FMA1003B-*0-10,000 (0-50.8)Right Angle Probe-40 to 121°C (-40 to 250°F)
FMA1003B-*-HT-40 to 171°C (-40 to 340°F)
FMA1003R-*Remote Probe-40 to 121°C (-40 to 250°F)
FMA1003R-*-HT-40 to 171°C (-40 to 340°F)
FMA1004A-*Fixed Probe-40 to 121°C (-40 to 250°F)
FMA1004A-*-HT-40 to 171°C (-40 to 340°F)
FMA1004B-*0-500 (0-2.54)Right Angle Probe-40 to 121°C (-40 to 250°F)
FMA1004B-*-HT-40 to 171°C (-40 to 340°F)
FMA1004R-*Remote Probe-40 to 121°C (-40 to 250°F)
FMA1004R-*-HT-40 to 171°C (-40 to 340°F)
FMA1005A-*Fixed Probe-40 to 121°C (-40 to 250°F)
FMA1005A-*-HT-40 to 171°C (-40 to 340°F)
FMA1005B-*0-2000 (0-10.16)Right Angle Probe-40 to 121°C (-40 to 250°F)
FMA1005B-*-HT-40 to 171°C (-40 to 340°F)
FMA1005R-*Remote Probe-40 to 121°C (-40 to 250°F)
FMA1005R-*-HT-40 to 171°C (-40 to 340°F)
FMA1006A-*Fixed Probe-40 to 121°C (-40 to 250°F)
FMA1006A-*-HT-40 to 171°C (-40 to 340°F)
FMA1006B-*0-12,000 (0-60.9)Right Angle Probe-40 to 121°C (-40 to 250°F)
FMA1006B-*-HT-40 to 171°C (-40 to 340°F)
FMA1006R-*Remote Probe-40 to 121°C (-40 to 250°F)
FMA1006R-*-HT-40 to 171°C (-40 to 340°F)
* - Specify analog output for air velocity
-MA, 4-20 mA output
-V1, 0-5 Vdc output
-V2, 0-10 Vdc output
The air temperature analog output is 0-5 Vdc.
2-2
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.