Page 1
ALL-IN-ONE
90
(3.5)
100
(3.9)
110
(4.3)
120
(4.7)
130
(5.1)
8
(0.3)
85
(3.3)
Four, 4.5 (0.2) dia.
Weight:
610 g
(22 oz)
max
90
(3.5)
100
(3.9)
110
(4.3)
76
(3.0)
86
(3.4)
8
(0.3)
85
(3.3)
Four, 4.5 (0.2) dia.
Weight:
380 g
(13 oz)
max
CPU units with 14 or 20 I/O points
CPU units with 30 I/O points
PROGRAMMABLE LOGIC
CONTROLLERS (PLCs)
CP1L
Starts at
$
398
l Up to 18 Digital Inputs,
12 Relay Outputs
l Expandable to 150 I/O with
Expansion Modules
l Powerful Instruction Set
l 10K Program Steps
(32K Words Data Memory)
l Remote I/O Modules for Analog
I/O, Digital I/O, Thermocouples
and RTDs
CP1L-L20DR-A,
$475, shown smaller
than actual size.
The CP1L Series is an economical all-in-one
package-type PLC. A wide variety of built-in
functions expand application capabilities and
shorten the design time required for the
growing number and increasing complexity
of ladder programs.
With high-speed instruction processing
(550 nS for basic instructions), up to
150 I/O points including advanced
temperature and analog expansion
modules, and PID instructions with
on-demand auto-tuning, the CP1L Series
is ideal for continuous process control
applications at an affordable cost.
Equipped with a USB interface as standard
for programming and monitoring, the new
CPUs allow up to two serial ports to be
plugged in for communication with HMI or
field devices. And, of course, they provide
“Smart Platform” communication routing
over multiple network layers. Using CX-One,
programs can be created that enable the
user to build, configure and program
networks, PLCs, HMIs, motion-control
systems, drives, temperature controllers
and sensors.
The CP1L CPU Series has the same
architecture as the CS/CJ PLC Series, which
means programs are compatible for memory
allocations and instructions and support
Function Blocks and Structured Text in
addition to Ladder Logic.
A-1
Dimensions: mm (in)
Page 2
CPU UNIT SPECIFICATIONS
ITEMS CP1L-XXXXX-A CP1L-XXXXX-D
POWER SUPPLY 100 to 240 Vac 50/60 Hz 24 Vdc
OPERATING VOLTAGE RANGE 85 to 264 Vac 21.6 to 26.4 Vdc
POWER CONSUMPTION 50 VA max 20 W max
INRUSH CURRENT 100 to 120 Vac inputs: 20 A max 8 ms max 30 A max 20 ms max
EXTERNAL POWER SUPPLY None 300 mA at 24 Vdc
INSULATION RESISTANCE 20 MΩ min (at 500 Vdc) between the 20 MΩ min (at 500 Vdc) between the
DIELECTRIC STRENGTH 2300 Vac at 50/60 Hz for 1 min between 1000 Vac at 50/60 Hz for 1 min between
NOISY IMMUNITY Conforming to IEC 61000-4-4. 2 kV (power supply line)
VIBRATION RESISTANCE Conforms to JIS C0040. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz,
SHOCK RESISTANCE Conforms to JIS C0041. 147 m/s
AMBIENT OPERATING 0 to 55°C (32 to 131ºF)
TEMPERATURE
AMBIENT HUMIDITY 10 to 90% (with no condensation)
AMBIENT OPERATING No corrosive gas
ENVIRONMENT
AMBIENT STORAGE -20 to 75°C (-4 to 167ºF) (excluding battery)
TEMPERATURE
POWER HOLDING TIME 10 ms min 2 ms min
DIMENSIONS 150 W x 90 H x 85 mm D (5.90 x 3.54 x 3.35")
WEIGHT 610 g (22 oz) max 610 g (22 oz) max
AC POWER SUPPLY MODELS: DC POWER SUPPLY MODELS:
200 to 240 Vac inputs: 40 A max 8 ms max
external AC terminals and GR terminals external DC terminals and GR terminals
the external AC and GR terminals, leakage the external DC and GR terminals,
current: 5 mA max leakage current: 5 mA max
2
acceleration: 9.8 m/s
in X, Y, and Z directions for 80 minutes each
(sweep time: 8 minutes x 10 sweeps = total time 80 minutes)
2
, three times each in X, Y, and Z directions
MODEL NO. CP1L-M60 CP1L-M40 CP1L-M30 CP1L-L20 CP1L-L14 CP1L-L10
POINTS 60 40 30 20 14 10
CONTROL METHOD Stored program method
I/O CONTROL METHOD Cyclic scan with immediate refreshing
PROGRAM LANGUAGE Ladder diagram
FUNCTION BLOCKS Maximum number of function block definitions: 128; maximum number of instances: 256;
languages usable in function block definitions: ladder diagrams, structured text (ST)
INSTRUCTION LENGTH 1 to 7 steps per instruction
INSTRUCTIONS Approx 500 (function codes: 3 digits)
INSTRUCTION Basic instructions: 0.55 µs min, special instructions: 4.1 µs min
EXECUTION TIME
COMMON 0.4 ms
PROCESSING TIME
PROGRAM CAPACITY 10K steps 5K steps
NUMBER OF TASKS 288 (32 cyclic tasks and 256 interrupt tasks)
SCHEDULED 1 (interrupt task No. 2, fixed)
INTERRUPT TASKS
INPUT INTERRUPT 6 (interrupt task No. 140 to 145, fixed) 4 (interrupt 2 (interrupt
TASKS task no. 140 task no.
to 143, fixed) 140 to
141, fixed)
Interrupt tasks can also be specified and executed for high-speed counter interrupts and executed
MAX SUBROUTINE NO. 256
MAX JUMP NO. 256
A-2
Page 3
CPU UNIT SPECIFICATIONS (CONT’D)
MODEL NO. CP1L-M60 CP1L-M40 CP1L-M30 CP1L-L20 CP1L-L14 CP1L-L10
24: CIO 0.00 to
0.11 and
CIO 1.00 to 1.11
18: CIO 0.00 to
0.11 and
CIO 1.00 to 1.05
12: CIO 0.00
to 0.11
8: CIO 0.00
to 0.07
6: CIO 0.00
to 0.05
INPUT BITS
36: CIO 0.00 to
0.11, CIO 1.00
to 1.11 and
CIO 2.00 to 2.11
8: CIO 100.00
to 100.07
3000 to 3063)
CIO
3100 to 3189)
CIO
6: CIO 100.00
to 100.05
4: CIO 100.00
to 100.03
I/O
AREAS
24: CIO 0.00
to 0.11, and
CIO 100 to 1.11
OUTPUT BITS
24: CIO 100.00
to 100.07,
CIO 101.00
to 101.07, and
CIO 102.00
to 102.07
1:1 LINK AREA 1024 bits (64 words):
SERIAL PLC 1440 bits (90 words):
12: CIO 100.00
to 100.07, and
CIO 101.00
to 101.03
3000.00 to 3063.15 (
CIO
3100.00 to 3189.15 (
CIO
LINK AREA
WORK BITS 8192 bits (512 words): W000.00 to W511.15 (W0 to W511) CIO area: 37,504 bits (2344 words):
3800 to 6143)
3800.00 to 6143.15 (
CIO
CIO
TR AREA 16 bits: TR0 to TR15
HOLDING AREA 8192 bits (512 words): H0.00 to H511.15 (H0 to H511)
AR AREA Read-only (write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447) read/write:
8192 bits (512 words): A448.00 to A959.15 (A448 to A959)
TIMERS 4096 bits: T0 to T4095
COUNTERS 4096 bits: C0 to C4095
DM AREA 32 Kwords: D0 to D32767; 10 Kwords: D0 to D9999, D32000 to D32767
DATA REGISTER AREA 16 registers (16 bits): DR0 to DR15
INDEX REGISTER AREA
16 registers (32 bits): IR0 to IR15
TASK FLAG AREA 32 flags (32 bits): TK0000 to TK0031
TRACE MEMORY 4000 words (500 samples for the trace data maximum of 31 bits and 6 words)
MEMORY CASSETTE A special memory cassette (CP1W-ME05M) can be mounted
Note: Can be used for program backups and auto-booting
CLOCK FUNCTION Supported accuracy (monthly deviation): -4.5 to -0.5 min (ambient temperature: 55°C),
-2.0 to 2.0 min (ambient temperature: 25°C) -2.5 to 1.5 min (ambient temperature: 0°C)
One built-in peripheral port (USB 1.1): for connecting support software only
COMMUNICATIONS
FUNCTIONS
A maximum of two serial communications A maximum of one serial Not supported
option boards can be mounted communications option
board can be mounted
A maximum of two ethernet option board can be mounted Not supported
MEMORY BACKUP Flash memory: user programs, parameters (such as the PLC setup), comment data, and the
entire DM area can be saved to flash memory as initial values; battery backup: the holding area,
DM area, and counter values (flags, PV) are backed up by a battery
BATTERY 5 years at 25°C (use the replacement battery within 2 years of manufacture)
SERVICE LIFE
BUILT-IN INPUT 60 (36 inputs, 40 (24 inputs, 30 (184 inputs, 20 (12 inputs, 14 (8 inputs, 10 (6 inputs,
TERMINALS 24 outputs) 16 outputs) 12 outputs) 8 outputs) 6 outputs) 4 outputs)
NUMBER OF CP series expansion unit and units: 3 max CP series expansion Not supported
CONNECTABLE units and expansion I/O
EXPANSION UNITS AND
EXPANSION I/O UNITS
MAX NUMBER OF 180 [60 160 [40 150 [30 60 [20 54 [14
built-in + 40 built-in + 40 built-in + 40 built-in + 40 built-in + 40
per expansion per expansion per expansion per expansion per expansion 10 (10 built-in)
(I/O) unit (I/O) unit (I/O) unit (I/O) unit (I/O) unit
× 3 units] × 3 units] × 3 units] × 1 unit] × 1 unit]
INTERRUPT INPUTS 6 inputs (response time: 0.3 ms) 4 inputs 2 inputs
(response time: (response
0.3 ms) time: 0.3 ms)
A-3
Page 4
CPU UNIT SPECIFICATIONS (CONT’D)
MODEL NO. CP1L-M60 CP1L-M40 CP1L-M30 CP1L-L20 CP1L-L14 CP1L-L10
INTERRUPT INPUTS 6 inputs (response frequency: 5 kHz max for all interrupt 4 inputs 2 inputs
COUNTER MODE inputs) 16 bits up or down counters (response (response
QUICK-RESPONSE 6 points (min input pulse width: 50 µs max) 4 points (min 2 points (min
INPUTS input pulse input pulse
SCHEDULED 1
INTERRUPTS
HIGH-SPEED 4 counters, 2 axes (24 Vdc input) 4 inputs: differential phases (4x), 50 kHz single-phase
COUNTERS (pulse plus direction, up/down, increment), 100 k value range: 32 bits, linear mode or ring mode
PULSE PULSE Trapezoidal or S-curve acceleration and deceleration (duty ratio: 50% fixed) 2 outputs,
OUTPUTS OUTPUTS 1 Hz to 100 kHz (CCW/CW or pulse plus direction)
(MODELS
WITH
TRANSISTOR
OUTPUTS
ONLY)
ANALOG CONTROL 1 (setting range: 0 to 255)
EXTERNAL 1 input (resolution: 1/256, input range: 0 to 10V) not isolated
ANALOG INPUT
PWM
OUTPUTS
Interrupts: target value comparison or range comparison
Duty ratio: 0.0 to 100.0% (specified in increments of 0.1 or 1%) 2 outputs, 0.1 to 6553.5 Hz or
1 to 32,800 Hz (Accuracy: ±5% at 1 kHz)
frequency:
max for all max for all
interrupt inputs), interrupt inputs),
16 bits up or 16 bits up or
down counters down counters
width:
50 µs max)
5 kHz
frequency:
width:
50 µs max)
5 kHz
To Order (Specify Model Number)
MODEL NO. PRICE DESCRIPTION
CP1L-L14DR-A $398 AC power, 8 DC in/6 relay out
CP1L-L20DR-A 475 AC power, 12 DC in/8 relay out
CP1L-M30DR-A 745 AC power, 18 DC in/12 relay out
DIGITAL I/O EXPANSION MODULES
CP1W-8ER $200 8 relay outputs
CP1W-20EDR1 366 12 DC inputs, 8 relay outputs
ANALOG I/O EXPANSION MODULES
CP1W-AD041 $570 4 analog inputs
CP1W-DA041 570 4 analog outputs
CP1W-TS001 440 2 thermocouple inputs
CP1W-TS002 620 4 thermocouple inputs
CP1W-TS101 440 2 RTD inputs
CP1W-TS102 620 4 RTD inputs
SPECIALTY EXPANSION MODULES (LIMIT 2 PER PLC, ADAPTOR REQUIRED)
CP1W-EXT01 $120 CJ unit adaptor (required for specialty modules)
CJ1W-DRM21 1020 DeviceNet communications module
CJ1W-PH41U 1755 4-point universal analog input module; 0.001°C temperature resolution
OPTION BOARDS (LIMIT 1 PER L-MODEL PLC, 2 PER M-MODEL PLC)
CP1W-CIF01 $85 RS232C option board
CP1W-CIF11 85 RS422A/485 option board
CP1W-CIF41 235 Ethernet adaptor
CP1W-EIP01-US 262 Ethernet/IP slave adaptor
CP1W-MODTCP01-US 175 Ethernet/MODBUS®TCP adaptor
CP1W-DAM01 126 LCD option board
CP1W-ME05M 80 Memory cassette option board
MOST POPULAR MODELS HIGHLIGHTED!
SOFTWARE AND ACCESSORIES
MODEL NO. PRICE DESCRIPTION
CXONE-LT01C-V4 $1290 Programming software
CBLUSB00 26 USB programming cable, USB A-B
Ordering Examples: CP1L-L14DR-A, PLC with 14 I/O, CXONE-LT01C-V4, programming software, and CBLUSB00, USB programming cable,
$398 + 1290 + 26 = $1714.
CP1L-L20DR-A, PLC with 20 I/O, CXONE-LT01C-V4 programming software, and CBLUSB00, USB programming cable,
$475 + 1290 + 26 = $1791.
A-4
Page 5
One Omega Drive | Stamford, CT 06907 | 1-888-TC-OMEGA (1-888-826-6342) | info@omega.com
EPG05
www.omega.com
UNITED KINGDOM
www. omega.co.uk
Manchester, England
0800-488-488
UNITED STATES
www.omega.com
1-800-TC-OMEGA
Stamford, CT.
CANADA
www.omega.ca
Laval(Quebec)
1-800-TC-OMEGA
GERMANY
www.omega.de
Deckenpfronn, Germany
0800-8266342
Karviná, Czech Republic
FRANCE
www.omega.fr
Guyancourt, France
088-466-342
CZECH REPUBLIC
www.omegaeng.cz
596-311-899
BENELUX
www.omega.nl
Amstelveen, NL
0800-099-33-44
More than 100,000 Products Available!
Temperature
Calibrators, Connectors, General Test and Measurement
Instruments, Glass Bulb Thermometers, Handheld Instruments
for Temperature Measurement, Ice Point References,
Indicating Labels, Crayons, Cements and Lacquers, Infrared
Temperature Measurement Instruments, Recorders Relative
Humidity Measurement Instruments, RTD Probes, Elements
and Assemblies, Temperature & Process Meters, Timers and
Counters, Temperature and Process Controllers and Power
Switching Devices, Thermistor Elements, Probes and
Assemblies,Thermocouples Thermowells and Head and Well
Assemblies, Transmitters, Wire
Flow and Level
Air Velocity Indicators, Doppler Flowmeters, Level
Measurement, Magnetic Flowmeters, Mass Flowmeters,
Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel
Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area
Flowmeters, Vortex Shedding Flowmeters
pH and Conductivity
Conductivity Instrumentation, Dissolved Oxygen
Instrumentation, Environmental Instrumentation, pH
Electrodes and Instruments, Water and Soil Analysis
Instrumentation
Data Acquisition
Auto-Dialers and Alarm Monitoring Systems,
Communication Products and Converters, Data
Acquisition and Analysis Software, Data Loggers
Plug-in Cards, Signal Conditioners, USB, RS232, RS485
and Parallel Port Data Acquisition Systems, Wireless
Transmitters and Receivers
Pressure, Strain and Force
Displacement Transducers, Dynamic Measurement
Force Sensors, Instrumentation for Pressure and Strain
Measurements, Load Cells, Pressure Gauges, Pressure
Reference Section, Pressure Switches, Pressure Transducers,
Proximity Transducers, Regulators,
Strain Gages, Torque Transducers, Valves
Heaters
Band Heaters, Cartridge Heaters, Circulation Heaters,
Comfort Heaters, Controllers, Meters and Switching
Devices, Flexible Heaters, General Test and Measurement
Instruments, Heater Hook-up Wire, Heating Cable
Systems, Immersion Heaters, Process Air and Duct,
Heaters, Radiant Heaters, Strip Heaters, Tubular Heaters
click here to go to the omega.com home page
Loading...