Omega Products CN2110-DC User Manual
1
Extended Warranty
Program
SM
⁄4 DIN Compact Temperature
Controller
CN2110 Series
Starts at
$
340
⻬ Compact 1⁄4 DIN Design
102 mm (4") Depth
⻬ On/Off or
Proportional Control
⻬ 20 A Mechanical
Relay Option
⻬ Plug-In Output Modules
⻬ J, K Thermocouple or
RTD Inputs, °F and °C
Indication, Switch
Selectable
⻬ Alarm Relay
Output Option
⻬ NEMA 4X (IP65)
Front Panel
P
a
n
e
l
p
u
n
c
h
e
a
v
a
i
l
a
b
o
m
e
g
a
p
a
n
e
l
p
u
s
l
e
,
v
i
s
i
t
.
c
o
m
/
n
c
h
e
s
The CN2110 temperature controller
offers simple setup, flexibility and
control features in an attractive,
compact design that both OEMs
and users will find cost-effective.
The CN2110 is housed in a rugged,
plastic 1⁄4 DIN package that only
requires 4" behind the mounting
surface. Straightforward operation
and easy-to-use control features are
major strengths of the CN2110
controller.
Full Feature Outputs
A total of 6 output types further
extend the applications flexibility
of the CN2110 controller:
• 1 A relay
• 20 A relay
• 1 A solid state relay
• 5 A solid state relay
• 10 A solid state relay
• DC pulse, SSR drive
The CN2110 features a variety of
output modules including highcurrent options of a 10 A solid state
relay or 20 A mechanical relay.
These outputs can directly control
many cartridge or strip heaters,
eliminating the need for a remote
contactor or solid state relay. For
larger, 3-phase loads, the CN2110
can drive a remote device with the
pilot duty relay or solid state relay
drive outputs.
CN2110-DC, $340,
shown actual size.
The optional alarm output gives the
user a non-latching, normally
de-energized, 5 A relay output for
over- or under-temperature protection
of critical process temperatures.
Packaging with the User in Mind
The CN2110 features a NEMA 4X
(IP65) front panel with tactile
feedback push buttons. Large,
bright LED’s provide an easy-to-read
interface at a distance.
Flexibility and Simplicity
Outputs are plug-in modules that
are field replaceable. The switchselectable control modes include
on/off or proportional-integral (PI).
Sensor Types J, K, RTD are also
switch selectable. No programming
necessary.
Features
High-Current Switching
The CN2110 features high-current
output switching (relay and solid
state relay), eliminating the need
for an external power switching
device and reducing installation
cost. Single-phase loads up to
20 A may be directly connected
to the CN2110, eliminating the need
P-67
for a remote contactor or solid state
relay. The internal relay option can
switch up to 20 A or the internal
solid state relay option can switch
up to 10 A. The CN2110
automatically detects the output
type and adjusts the controllers
setting for optimal control.
Control Modes
The CN2110 provides precise,
solid state proportion control with
automatic reset (PI) that will control
most heating applications. On/off
control may be selected for
applications where maximum output
life (load switching) is needed.
OMEGACARESMextended warranty program is
available for models shown on this page. Ask
your sales representative for full details when
placing an order. OMEGACARE
labor and equivalent loaners.
SM
covers parts,
Load
A
larm
°F
°
C
Temp
S
et
Point
Set Point
101.6
(4.0)
101.6
(4.0)
102
(4.0)
92
(3.6)
90
(3.55)
10
(0.4)
12.7
(0.5)
*
92
(3.6)
92
(3.6)
P
anel
Cutout
Specifications
Control Modes: On/off, PI-proportional
with integral
Control Adjustments
Proportional Band: Sensor range
Automatic Reset:
0.0 to 99.9 repeats/min
Cycle Time: 0.1 to 60.0 sec
n/Off Deadband: 1° to 100°F or °C
O
Setpoint Upper Limit: Sensor range
°F or °C
Setpoint Lower Limit: Sensor range
°F or °C
Output Limit: 0 to 100%
Alarm Adjustments:
Type: Absolute, high or low
Setpoint: Sensor range °F or °C
Alarm Dead Band: 0 to 100°F or °C
Control/Alarm Outputs:
Relay (-R1): 1 A form A, 120/240 Vac
Relay (-R20): Form A, 120/240 Vac
resistive loads at 30 s cycle time; 20 A,
500,000 operations; 15 A, 1 million
operations; 5 A, 5 million operations
Solid State Relay Drive (-DC):
24 Vdc at 40 mA
Solid State Relay (-T1):
1 A, up to 240 Vac
Solid State Relay (-T5):
5 A, up to 240 Vac at 40°C
Solid State Relay (-T10):
10 A, up to 240 Vac at 40°C
Alarm: Form C, relay 5 A@ 120 Vac,
2.5 A at 240 Vac
Sensor Input: Switch selectable J, K
thermocouple or RTD
Input Update Rate: 4 samples/s
Readout Stability:
J and K Thermocouple: ±1°F per
10°F change in ambient temperature
RTD: ±0.5 per 10°F change in
ambient temperature
Open Sensor and Out-of-Range:
Conditions: Displays “SEnS”, control
output 0%
Instrument Power: 90 to 260 Vac ,<10 Va
Operating Environment: 0° to 65°C
(32°to 150°F)
Enclosure Material: High-temperature
ABS plastic rated for 0° to 175°F
Front Panel:
NEMA 4X (IP65) construction
Influence of Line Voltage Variation:
±0.1% of sensor span per 10% change
in nominal line voltage
Noise Rejection:
Common Mode Noise: <2°F with
230 Vac, 60 Hz applied from sensor
input to earth ground
Series Mode Noise: <2°F with 100 mV,
peak-to-peak series mode noise
RFI: Typically <0.5% of sensor span
at distance of 1 m (3.1') from a
transmitter of 4 W at 464 MHz
Sensor Leadwire Effect:
RTD: ±0.1% of sensor span per
20 Ω balanced leadwire resistance
* With alarm option or S2 output
Dimensions: mm (in)
Input Specifications
Input Accuracy at
Specifications Range °F Range °C 77°F ambient
Iron-Constantan -100 to 1400°F -73 to 760°C 0.2% span ±1 LSD
CHROMEGA®-
ALOMEGA
®
-300 to 2400°F -184 to 1316°C 0.2% span ±1 LSD
100Ω Pt, 3-wire -200 to 1000°F -128 to 538°C 0.2% span ±1 LSD
MOST POPULAR MODELS HIGHLIGHTED!
To Order (Specify Model Number)
Model No. Price Description
CN2110-R1 $345 Relay, 1 A
CN2110-R20 350 Relay, 20 A
CN2110-DC 340 DC pulse 24 Vdc
CN2110-T1 345 AC SSR, 1 A
CN2110-T5 365 AC SSR, 5 A
CN2110-T10 390 AC SSR, 10 A
Comes complete with operator’s manual.
Ordering Examples: CN2110-R20, controller with a 20 A relay, $350.
OCW-3, OMEGACARE
$350 + 87 = $437.
CN2110-T10, controller with a 10 A ac SSR, $390
Option
Order Suffix Add’l Price Description
-AL $25 Alarm
Accessories* (Field Installable)
Model No. Price Description
2110X-R1 $55 1 A relay output module
2110X-R20 55 20 A relay output module
2110X-DC 45 DC pulse output module
2110X-T1 55 1 A, AC SSR output module
2110X-T5 110 5 A, AC SSR output module
2110X-T10 110 10 A, AC SSR output module
2110X-R1-AL 70 1 A relay output module, with alarm
2110X-R20-AL 80 20 A relay output module, with alarm
2110X-DC-AL 70 DC pulse output module, with alarm
2110X-T1-AL 70 1 A, AC SSR output module, with alarm
2110X-T5-AL 150 5 A, AC SSR output module, with alarm
2110X-T10-AL 150 10 A, AC SSR output module, with alarm
CNQUENCHARC 8 Noise suppression RC snubber (2 leads),
Alarm relay built into output module. If ordering a replacement module for existing controller
*
with alarm, must specify accessory module with “-AL” suffix.
SM
extends standard 1-year warranty to a total of 4 years ($87),
110 to 230 Vac
P-68
P
Loading...