INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
FOR OMEGA BUILT-IN PYROLYTIC ELECTRIC OVEN
OO61PX BUILT-IN ELECTRIC PYROLYTIC OVEN
CONGRATULATIONS
Thank you for choosing one of our many fantastic built in ovens. We are confident that you will now be
able to meet your cooking needs. Before you use the oven we strongly recommend that you read
though the whole user manual which provides the description of this product and the proper use of its
functions.
To avoid the ever-present risks involved with using an electrical appliance it is vital that the oven is
installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. It is
important that you retain these instructions and your proof of purchase along with any other important
documents about this product for future reference.
Due to continual product development, Omega reserves the right to alter specifications or appearances
•Most of the packing materials are recyclable. Please dispose of these materials through your
local recycling depot or by placing them in appropriate collection containers.
•If you wish to discard this product, please contact your local authorities and ask for the
correct method of disposal.
2
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the assembly instruction section and safety precautions of this booklet carefully before removing the
contents of this carton.
1.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience or knowledge, unless they have been given supervision or instructions concerning the use of the appliance
by a person responsible for their safety. Children should be supervised to insure that they do not play with the appliance.
2.
In certain circumstances electrical appliances may be a danger hazard.
3.
Do not place heavy objects in or on these appliances, use for storage or let children play/swing from the door. These appliances
are designed for cooking food only.
4.
This appliance is designed for domestic household use only and for the cooking of domestic food products. Use as a
commercial appliance will void the warranty. It should not to be used in a marine environment or outdoors.
5.
This appliance is supplied with a 15 amp plug. The plug has a large earth terminal that will not fit into a common electrical
socket. To install the oven, a special socket is required to be installed by a licensed electrician (if it does not already exist at the
point of installation).
6.
If the electrical supply cord is damaged, either when being installed or after installation, it must be replaced by the
manufacturer, its service centre or similarly a qualified person in order to prevent a hazard.
7.
The electrical connection must be accessible after installation. The appliance must be electrically isolated before any
maintenance can be performed, which includes changing a lamp.
8.
Electrical connection must be made as per local wiring rules and regulations. Do not disconnect the appliance with wet hands
or bare feet, and do not disconnect the power cord with extreme force.
9.
Always grasp the oven door in the centre of the handle as the areas around the door edges may be hot due to the escape of hot
air.
10.
Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking with this appliance.
11.
Do not store or use flammable materials or aerosols near the oven. Items made from aluminium, plastic or plastic film
should also be kept away from the appliance, as they may fuse to the surface.
12.
Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the cooking and
even damage the enamel.
13.
WARNING - The oven will become hot during and directly after use. Do not touch any components during this time, as they may
be hot and can cause burns. Do not touch the heating elements inside the oven to avoid burns. Children should be kept away.
Use heat resistant cooking gloves where possible when moving food and cooking utensils in and out of the oven.
14.
Cleaning may only be commenced on the appliance once it has cooled down (best slightly warm). The appliance should be
disconnected from the power outlet or turned off at your isolation switch before commencing any cleaning process. Do not use
a steam jet or any other high pressure cleaning equipment to clean the appliance. Follow oven cleaner directions if these are
being used.
15.
Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper or cloth towel. If you use your oven for an
extended period of time, condensation may form. Dry it using a soft dry cloth.
16.
When the appliance is not being used, the knobs must be kept in the ‘OFF’ position.
17.
Where this appliance is installed in a caravan, it shall NOT be used as a space heater.
18.
Do not modify this appliance.
19.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass oven door glass as it can scratch the surface, which
may result in the glass shattering. Clean the glass door using warm damp cloth and dry it with a soft cloth.
20.
All cabinetry and materials used in the installation must be able to withstand a minimum temperature of 50°C above the
ambient temperature of the room it is located in, whilst in use. Certain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at temperatures outside the guidelines given above. Any damage caused
by the appliance being installed without adhering to the temperature limits set out above will be the liability of the owner.
21.
This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the manufacturer’s
instructions. Please see the specific section of this booklet that refers to installation.
22.
The appliance must be installed and put in operation by an authorised technician under the conditions provided by the
manufacturer in this manual. The manufacturer cannot be held responsible for any damage that might occur due to faulty
installation.
23.
The values indicated on the printed documents found on the product are values obtained in laboratory environment
according to relevant standards. These values may vary according to the usage and environment conditions of product.
24.
This operating manual has been prepared jointly for multiple models. Some of the specifications explained in the manual, may
not be included in your appliance. Pay attention to the explanations with illustrations while reading the manual.
3
APPLIANCE DETAILS
Relevant Sizes:
LENGTH (mm)
WIDTH (mm)
HEIGHT
(mm)
External Oven size
595 570 595
ELECTRICAL DETAILS:
OVENS:
Rated Voltage:
Max Rated Inputs:
Supply Connection:
This information can be found on the rating plate (data label) affixed to the inside of the door jamb.
SIZES:
OO62PX
220 to 240V ac 50 Hz
2600W
OVENS - 15 A plug
ELECTRICAL CONNECTIONS
LOCAL AUTHORITY REQUIREMENTS
Installation is only permitted by a licensed electrician, and carried out according to instructions
provided by the manufacturer. Incorrect installation might cause harm and damage which the
manufacturer accepts no responsibility.
ELECTRICAL INSTALLATION FOR THE LICENSED ELECTRICIAN
This oven must be connected to a 220-240V 50Hz power supply. It is earthed via the cord and 15A plug.
Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the
appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the
mains electric wiring should be suitable for the oven’s power rating (also indicated on the appliance identification
plate);
The switched outlet must be connected to a suitable earth wiring, in conformity to current safety regulations.
This appliance must be plugged into a 15A switched outlet. It should not be located above the appliance and no
more than 1.25m away from it. The power supply cord must not touch any hot surfaces and must be placed so that
its temperature does not exceed 75°C at any point along its length. After having installed the appliance, the
switched outlet must always be in an accessible position.
NOTE: For connections to the mains power supply, never use adapters, reductions or multiple power points as
these may overheat and catch fire.
The mains terminal block is located on the back of the oven and the terminals are accessible by opening the
terminal block cover.
Note: The terminal cover should not be opened when the mains power is still connected to the appliance and never
by an unauthorized person.
The electrical safety of this appliance can only be guaranteed if the oven is correctly and efficiently earthed. The
manufacturer declines all responsibility for damage resulting from an installation which has not been earthed
correctly. The use of adapters, multiple sockets and/or extensions, is not allowed.
4
OVEN LAMP REPLACEMENT
•
The appliance must first be disconnected from the power outlet or turned off at your isolation switch.
•
Unscrew the glass cover attached to the lamp holder; anti-clockwise.
•
Unscrew the lamp and replace it with another high-temperature lamp with the following characteristics:
Type: E 14
Voltage: AC220V-240V
Wattage: 25W Temperature rating: 300°
•
Remount the glass cover and reconnect the appliance to the power supply
NOTE: Should you experience any difficulty please contact your nearest after-sales service centre.
5
INSTALLATION
The adjacent furniture must be able to withstand a minimum temperature rise of 50°C above the
ambient temperature of the room it is located in during periods of use. The power supply to the
appliance must be cut off before any adjustments or maintenance work is done on it.
PREPARATION FOR INSTALLATION AND USE
Manufactured with best quality parts and materials, this modern, functional and practical oven will meet your
needs in all respects. Make sure to read the manual to obtain successful results so as not to experience any
problems in the future. The information given below contains rules that are necessary for correct positioning and
service operations. They should be read without fail, especially by the technician who will position the appliance.
CHOOSING A PLACE FOR THE APPLIANCES
here are several factors to consider when choosing a place for your oven. Make sure to take into
T
account our recommendations below in order to prevent any problems and dangerous situations which
might arise.
When choosing a place for the oven, attention should be paid to ensure there are no flammable or combustible
materials in the close vicinity, such as curtains, oil, cloth etc. which quickly catch fire.
Furniture surrounding the oven or cooktop must be made of materials resistant to temperatures of at least
100 C°.
Required changes to wall cabinets and exhaust fans above a built-in cooktop as well as minimum heights
from the oven board are shown below. Accordingly, a range hood should be at a minimum height of 65 cm
from the cooktop. If there is no range hood the height should not be less than 70 cm. Refer to the range
hood instructions for specific details before installation.
6
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.