Omega TL-CSD User Manual

WARRANTY/DISCLAIMER

OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months
from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year
product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on
each product.

If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an
Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found
to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from
any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modifi cation. This WARRANTY is VOID if the unit shows evidence of having been tampered
with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration;
improper specifi cation; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which
wear is not warranted, include but are not limited to contact points, fuses, and triacs.

OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes
responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its
products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only
that the parts manufactured by the company will be as specifi ed and free of defects. OMEGA MAKES NO OTHER
WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF
TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set
forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract,
warranty, negligence, indemnifi cation, strict liability or otherwise, shall not exceed the purchase price of the
component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or
special damages.

CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10
CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any
Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way,
OMEGA assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and, additionally, purchaser will
indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s)
in such a manner.

OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the
latest in technology and engineering. OMEGA is a registered trademark of OMEGA ENGINEERING, INC.

© Copyright 2014 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA
ENGINEERING, INC.

FOR WARRANTY RETURNS, please have the following
information available BEFORE contacting OMEGA:

1. Purchase Order number under which the product was
PURCHASED,

2. Model and serial number of the product under warranty, and

3. Repair instructions and/or specifi c problems relative to the
product.

FOR NON-WARRANTY REPAIRS,

consult OMEGA for current
repair charges. Have the following information available
BEFORE contacting OMEGA:

1. Purchase Order number to cover the COST of the repair,

2. Model and serial number of the product, and

3. Repair instructions and/or specifi c problems relative to the

product.

RETURN REQUESTS / INQUIRIES

Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY
PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER
SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the
outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.

Servicing North America:

U.S.A.:

Omega Engineering, Inc., One Omega Drive, P.O. Box 4047

Stamford, CT 06907-0047 USA

Toll-Free: 1-800-826-6342 (USA & Canada only)
Customer Service: 1-800-622-2378 (USA & Canada only)
Engineering Service: 1-800-872-9436 (USA & Canada only)
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

For Other Locations Visit omega.com/worldwide

omega.com [e-mail]

The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains,
and reserves the right to alter specifi cations without notice.

TL-CSD

OMEGA® Cordless Screwdriver

e-mail: [e-mail]

For latest product manuals:

www.omegamanual.info

Shop online at

omega.com

®

User’s Guide

adap tor

plug

4.8 VOLT CORDLESS SCREWDRIVER
OPERATING INSTRUCTIONS

The safety instructions should be read carefully before operating the screwdriver.

Caution

Charging time should not exceed 5 hours.

and soft soap. Do not immerse the screwdrover or the charger in any liquid. The use
of solvent, alcohol, petrol, etc. is prohibited.

Operation
CAUTION: Safety Instructions should be read carefully before operating the

screwdriver.

Power supply:

Plug the supply connection into the screwdriver’s battery pack. The screwdriver is
fully charged after 5 hours.

Screwing/unscrewing:

The screwdriver is equipped with a forward / reverse switch(lever) to change chuck
sense of rotation.

1.clock wise,pusch the button

2.anti-clock wise,pusch the button
To stop rotation,slacken the switch.

Maintenance

This screwdriver does not require special maintenance.

Safety instructions

The following recommendations should be strictly complied with before operating the
screwdriver in order to avoid damage to the equipment and hazard to the user.

1. Wear individual protection equipment if necessary (gloves, shoes, eye protectors,
breathing filters, etc.). Do not wear jewelery or close-fitting clothing, protect long
hair.

2. Disconnect the charger when not in use or when you replace a tool bit.

3. Work in a clean and tidy room with sufficient lighting.

4. Place and store the screwdriver in a dry place, far from heat or dangerous vapors
(best temp. is between 10 and 15°C). Do not operate the screwdriver close to
explosive substances or inflammable material.

5. Use screwdriver adapted to the task to be performed. This do-it-yourself
screwdriver should be used as such and not be considered as heavy-duty equipment.

6. Do not work close to people, particularly children if work is hazardous. Keep
screwdriver away from children during and after work.

7. When drilling metal sheets, use a vice and a block of wood placed under the sheet.

8. Make sure you do not use the screwdriver on live parts to avoid electric shock.
Make sure you locate any electric wire or cable inside the wall before using the tool.

9. Do not try to open or disassemble the screwdriver or the charger.

10. If the charger is damaged (case,wires or plug), replace it immediately.

11. This screwdriver does not require special maintenance. The same applies to the
electrical parts of the tool.

12. Plastic parts should be cleaned only after disconnecting the charger. Use a wet cloth

chuck:1/4"=6.35mm (male);
forward/reverse switch for unscrewing/screwing;
rechargeable battery:4.8V;
acoustic pressure level:Lpa<70d

B (A)；

emitted vibration:acceleration<2.5m/s

Charger:input:120V AC 60Hz

protection against electric shock, class ll;
protection against moisture (IP 20);
output:6v dc,30 0mA

Specifications

Screwdriver:speed:150rpm;

TL-CSD

CORDLESS

SCREWDRIVER