Omega HH550 User Manual

CONTENTS

Title page

1. SAFET Y I N F O R M A T I O N................................................................................................1

2. SPECIFICATION.............................................................................................................2

2-1 General Specification........................................................................................... 2

2-2 Electrical Specification..........................................................................................5

3. PARTS & C O N T R OL S....................................................................................................6

3-1 The Name of Each Parts and Positions................................................................6

3-2 Power Status........................................................................................................9

3-3 Quick Manual for Easy Set-up..............................................................................9

3-4 ACV、DCV and DCA Test Setting

3-5 UNIT Setting Step..............................................................................................10

3-6 ALARM Setting Step........................................................................................... 10

3-7 Real Time Clock , Time/ Date Setting Step........................................................11

3-8 Record/Print Start Time, Stop Time, Interval Time Setting Step......................... 11

3-9 Print Mode Setting Step...................................................................................... 12

3-10 Clear Record Step............................................................................................12

3-11 Disable St art、Stop、Intv and Setting Step.................................................... 12

3-12 Decimal Point Setting Step...............................................................................12

3-13 Consecutive Record and Print Setting Step ..................................................... 12

3-14 Reset System Setting Step............................................................................... 12

3-15 Record / Print Start and Step Operation Method.............................................. 13

3-16 Memory Full Warning.......................................................................................13

3-17 Alarm Print in Graphic Mode ............................................................................13

3-18 Scale Change in Graphic Mode........................................................................ 14

..........................................................................9

3-19 How to ConnectsTL-(A37) Analog Output Cable.............................................. 14

3-20 Setup Process Transducer (4-20mA) Mode.....................................................15

4. BATTE R Y & F U S E R E P L A C EMENT...........................................................................16

4-1 Battery Check & Replacement ........................................................................... 16

4-2 Fuse Replacement.............................................................................................16

4-3 Note.................................................................................................................... 16

5. DATAL O GGING............................................................................................................ 16

5-1 Software Installation........................................................................................... 17

5-2 Default Settings..................................................................................................21

5-3 Meter Stand alone Operation............................................................................. 36

5-4 Download Datalogger (Graphic Recorder èPC)...............................................38

5-5 Data Conversion................................................................................................. 41

5-6 On-Line Operation with PC................................................................................. 45

1. SAFETY INFORMATION

Read the following safety information carefully before attempting to operate or service the meter.

q The meter analog input protection voltage range is 24V ，current

range is 250V/0.5A Fuse(MAX) , maybe damage forever if overload.

Environment conditions



Altitude up to 2000 meters



Indoor use



Relatively humidity 10~80%RH



Operation temperature 0 〜 40℃ (32~104℉)

：

Maintenance & Clearing

 Repairs or servicing not covered in this manual should only be

performed by qualified personnel.

 Periodically wipe the case with a dry cloth. Do not use abrasives or

solvents on this instruments.

Do not use abrasives or solvents on this instruments.

Safety symbols

：

Meter is protected throughout by double insulation or reinforced insulation.

Comply with EN-61010-1

2. SPECIFICATION

：

2-1 General Specification

Display ： 3

LCD symbols：

1342 2656724

1 2

LCD

SET

RS-232

15 12 13

DATE

– –

TIME

：：

START

：：

2227259142310

(Fig-1)

In setting mode symbol.

：

In RS-232 trans mi s si on m ode symbol.

：

Show the date of real time clock.

：

Show mode : month – day – year. Show t he time of re a l time clock.

：

Show mode is hour : minute : second. Show the start time of record / print.

Show mode is hour : minute : second.

STOP

：：

Show the stop time of record / print.

：

INTV

Show the interval time of record / print.

：：

：

8. ：DC test symbol.

9. ：AC test symbol.

10.

：Low battery indicator.

11. mVA ：Analog test indicate unit.

12. G ：The printer working in the graphic mode.

13. T ：The printer working in the text mode.

14. = ：Memory record indicator.

15. MAX ：MAX Analog input indicator.

16. MIN ：MIN Analog input indicator.

17. LUX ：LUX unit indicator.

18. Fc ：Feet-candle unit indicator .

19. dB ：dB unit indicator.

20. %RH ：Relative Humidity %RH unit indicator.

21.

22. .

：

Printer in using

：

7 segments to show the read value and decimal point of

indicator

LCD.

23.

：Negative polarity.

24.

HI ALARM

25.

LO ALARM

26.

HiHi ALARM

27.

LoLo ALARM

28.

℃ ,℉ ：

：

Hi alarm

：

Lo alarm

indicator

：

Hi Hi alarm

：

Lo Lo alarm

Temperature unit

indicator

29. Over Load Indicator ：Show or

。

Other parts：

Input Protection ：Voltage range 24V ，current range 0.5A/250V

Fuse(MAX)

Operation Temperature：0℃〜40℃( 32℉〜104℉ ) & (10~ 80% RH)

and Humidity

Conserve Temperature：-10℃〜60℃(14℉〜140℉) & (10~70% RH)

and Humidity Dimensions ：About 250 (L) × 100 (W) × 45(H) mm Weight ：About 500g with battery Printer ：Interval print :

00 hour : 00 mi nute : 03 second 〜23 hour :

59 minute : 59 sec

Trigger print : Print three data

(date / time / Reading)

Accessories ：Thermo carrying case, Test leads with alligator

clip, 2 rolls of thermo paper, 110V/220V AC to 9V DC power adapter/power cord, RS-232 cable, P.C. software disk, 6pcs 1.5V AA batteries, TL-A37 analog output cable, RS-232 convert header, Operation manual.

2-2 Electrical Specification

Analog test range ：DCV/ACV：2V，200mV

DCA： 20mA

Accuracy ：(at 23℃±5℃，below 80%RH)

DCè(±1%rdg+3dgts) ACè(±1%rdg+5dgts) at (50~450Hz)

Resolution ：200mV/2V range is 0.1mV/1mV

20mA range is 0.01mA A / D Sample Rate ：2.5 times/sec Power Source ：6 pcs 1.5V，# 3 battery or 9V, DC adaptor

(inside negative, outside positive)

Battery Life ：Approx. 100 hours (without printing) Printer ：Thermal printer (EPL1902 of Panasonic) MEMORY ：60000 records (up to 130000 records)

3. PARTS & CONTROLS

3-1 The Name of Each Parts and Positions:

200mV 2V 200 mV 2V 20mA

C¢XFcLux dB

¢X

HiHi Hi LoLoLo

DATE TIME START STOP

13456 789

SETTING

FEED

SETUP

LINE MIN

CLOCK ALARM

RECORD

TRIGGER

3 CONSECUTIVE

COM

20mA

MAX

FUSED

600V

(Fig-2)

¢X ¢X

60V 24V

MAX

RH A A

UNITRANGE MAX

INTV

200mV

C / F

HiHi

DATA

Lux/Fc

TIME

1/2/3

200mV

LoLo

START

4/5/6

%RH

STOP

Toggle button for ( 200mV, ℃/℉, HiHi, DATA) and digit “ o ”.

Toggle button for ( 2V, Lux/ Fc, Hi, TIME) and digit “ 1/2/3 ”.

Toggle button for ( 200mV, dB, LoLo, START) and digit “ 4/5/6 ”.

Toggle button for ( 2V, %RH, Lo, STOP) and digit “ 7/8/9 ”.

7/8/9

20m A/

G/T

INTV

3'SETTING

SETUP

Toggle button for ( 20mA, A / A, G / T, INTV ) button and “ ” right shift function.

Press and hold this button for 3 sec will into setting mode, press again will end setting mode.

RANGE

FEED LINE

Feed paper in normal mode, range function in setting mode.

10.

11.

“ COM ” Measuring

“ V ” Measuring

“ mA ” Measuring

UNIT MAX

MIN

CLOCK PRINT

ALARM

RECORD

Socket

MAX/MIN function in normal mode “ UNIT ” function in setting mode.

In normal mode, press 1 sec is trigger print function, press and hold for 3 sec is start/stop consecutive print function, but in setting mode will be “ clock ” function.

In normal mode, press 1 sec is trigger record ( MAX 255 times), In setting mode is “ alarm ” function, press and hold over 3 sec is start/stop consecutive record function.

Power button. To connect negative lead of voltage, current.

(black color)

To connect positive lead for voltage.(red color)

To connect positive lead for current.

LCD

Show test value, unit symbol and range indicator.

16 Thermal Printer Printing data. 17 Acryl Putting thermal paper.

RS-232 Connector

RS-232 used.

19 FEED Button Feed paper into printer 20 DC 9V Socket To connect adaptor.

3-2 Power Status :

As battery power is not sufficient, the , will be shown on LCD replace with six new 1.5V batteries is required.

3-3 Quick Manual for Easy Set-up

STEP1 STEP2 STEP3 STEP4 STEP5

Push this button 3 second.

SETUP

Select one.

RANGE

UNIT

CLOCK

ALARM

Choose one from specified

function Bar.

LUX / FC

TIME START

200mV

dB %RH

STOP

LoLo

200mV 2V

DATE

HiHi

20mA

A /

INTV

G / T

Reconfirm

input setting.

RANGE

UNIT CLOCK ALARM

a. You could only set up one of the functions at each time. b. To change position of point decimal, follow step1 & step2, then press button. c. To input digit, follow step1 & step3 to set the number.

Press to return normal.

SETUP

3-4 ACV、DCV and DCA Test Setting :

1. ACV 2V Test setting sequence：Press and hold à press

3'SETTING

RANGE

à press

, to end setting mode.

2. ACV 200mV Test setting sequence：Press and hold sec à press

3'SETTING

press

RANGE

à press

, to end setting mode.

3. DCV 2V Test setting sequence：Press and hold à press

3'SETTING

RANGE

à press

, to end setting mode.

à press

200mV

à press

3'SETTING

RANGE

à press

3'SETTING

RANGE

3'SETTING

for 3 sec

à press

for 3

RANGE

for 3 sec

à press

4. DCV 200mV Test setting sequence：Press and hold sec à press

3'SETTING

press

RANGE

à press

, to end setting mode.

200mV

à press

3'SETTING

RANGE

for 3

5. DCA 20mA Test setting sequence：Press and hold

sec à press

3'SETTING

press

RANGE

à press

, to end setting mode.

20mA

3-5 UNIT Setting Step：

1. ℃/℉ Setting step：press and hold

UNIT

press

à press

3'SETTING

, to end setting mode.

C/ F

change℃/℉ à press

2. Lux/Fc Setting step：press and hold

UNIT

press

à press

3'SETTING

Lux/Fc

change Luc/Fc à press

, to end setting mode.

3. dB Setting step：press and hold

UNIT

à press

to end setting mode.

4. %RH Setting step：press and hold

UNIT

à press

%RH

à press

to end setting mode.

5. / A Setting step：press and hold

UNIT

à press change A/ A à press

3'SETTING

, to end setting mode.

3'SETTING

UNIT

3'SETTING

UNIT

3'SETTING

à press

3'SETTING

for 3

RANGE

for 3 sec à press

UNIT

for 3 sec à press

UNIT

for 3 sec à press

à press

3'SETTING

for 3 sec à press

à press

3'SETTING

for 3 sec à press

UNIT

à press

3-6 ALARM Setting Step：

1. HIHI ALARM Setting step：press and hold

press

ALARM

à press

shift button setting “ALARM" à press to end setting mode.

2. HI ALARM Setting step：press and hold mode à press

ALARM

HiHi

à press

3'SETTING

for 3 sec à

à assort 0~9 number è right

ALARM

3'SETTING

à press

fo r 3 sec into setting

à assort 0~9 number

3'SETTING

è right shift button setting “ALARM" à press

3'SETTING

, to end setting mode.

ALARM

à press

3. LOLO ALARM Setting step：press and hold setting mode à press

ALARM

à press

number è right shift button setting “ALARM" à press

3'SETTING

press

, to end setting mode.

4. LO ALARM Setting step：press and hold setting mode à press

ALARM

à press

number è right shift button setting “ALARM" à press

3'SETTING

press

, to end setting mode.

3'SETTING

LoLo

for 3 sec into

à assort 0~9

ALARM

for 3 sec into

à assort 0~9

ALARM

3-7 Real Time Clock , Time/ Date Setting Step：

1. Real time clock , date setting step：press and hold sec into setting mode à press

CLOCK

à press

assort 0~9number è right shift button setting date à press

CLOCK

à press

3'SETTING

, to end setting mode.

2. Real time clock, time setting step：press and hold sec into setting mode à press

CLOCK

à press

assort 0~9number è right shift button setting time à press

CLOCK

à press

3'SETTING

, to end setting mode.

3'SETTING

for 3

DATE

for 3

TIME

3-8 Record/Print Start Time, Stop Time, Interval Time Setting Step:

Start time setting step setting mode

à press

：press and hold

CLOCK

à press

3'SETTING

START

number è right shift button setting start time à press

3'SETTING

press

2.Stop

time setting step setting mode 0~9number è right shift button

3'SETTING

press

3. Interval time setting step：press and hold setting mode à press number è right shift button setting in terval time à press

to end setting mode.

：press and hold

à press

to end setting mode.

CLOCK

setting stop time à press

CLOCK

à press

3'SETTING

à press

3'SETTING

INTV

for 3 sec into

à assort

CLOCK

for 3 sec into

STOP

CLOCK

for 3 sec into

à assort 0~9

CLOCK

0~9

assort

3'SETTING

press

to end setting mode.

3-9 Print Mode Setting Step：

Printer work mode setting sequence：press and hold sec into setting mode à press G/T MODE à press

3'SETTING

ALARM

, to end setting mode.

à press

3-10 Clear Record Step：

3'SETTING

G/T

for 3

change

Press

RECORD

Power ON in the same time

The LCD should display “dEL”

3-11 Disable Start、Stop、Intv and Setting Step：

1.Disable START、STOP、INTV sequence：press and hold

3'SETTING

START

for 3 sec into

3'SETTING

start, stop, intv à press

for 3 sec into setting mode à press

3'SETTING

to end setting mode.

2.Disable ALARM sequence：press and hold

setting mode à press

STOP

disable alarm à press

to end setting mode.

3-12 Decimal Point Setting Step：

Shift point setting sequence：press and hold enter setting mode à press

position à press

3'SETTING

to end setting mode.

INTV

3'SETTING

to change decimal point

3-13 Consecutive Record and Print Setting Step：

Setting sequence：press and hold mode à press

TIME

setting / = à press

end setting mode.

※ If already in setting MODE, press

3'SETTING

TIME

for 3 sec to enter setting

3'SETTING

button only.

3-14 Reset System Setting Step：

disable

3'SETTING

for 3 sec to

, to

Press

3'SETTING

+ Power ON

3-15 Record / Print Start and Step Operation Method：

(1). Start way :

1. Trigger Record / Print : in general mode press

RECORD

one second.

2. Consecutive Record/Print :



Automatic mode :

a). Into setting mode, setting Start/Stop/Into/Time. b). Chose automate consecutive Record/Print (by 3-13 setting

way)

c). Back to general mode, on LCD = or should be

repeat.



Hand setting mode :

a). Into setting mode, disable Start, Stop, Intv. (by 3-11 stop

way) b). Into setting mode, setting Intv. c). Back to general mode.

d). Press

RECORD

button 3 second, the LCD will be show

= or symbol, into consecutive Record / Print of hand

setting mode.

(2). End Record/Print :

1. Automatic mode : The function will be stopped automatically while the STOP time is up.

2. Hand setting mode :To stop consecutive Record/Print by user press

and hold

RECORD

symbol will be disappear.

button for 3 seconds. The LCD

3-16 Memory Full Warning : The = symbol will be flash.

3-17 Alarm Print in Graphic Mode :

When printing in G mode, if you have setting any alarm points (HiHi, Hi, LoLo, Lo) when the read value over the set points, the printer the will print alarm value on the paper.

RECORD

3-18 Scale Change in Graphic Mode

HiHi

ALARMHiALARMLoALARM

ü No change

ü ü Change scale by HiHi Hi ALARM ü ü Change scale by HiHi Lo ALARM ü ü Change scale by HiHi LoLo ALARM

ü ü Change scale by Hi Lo ALARM ü ü Change scale by Hi LoLo ALARM

ü ü Change scale by Lo LoLo ALARM ü ü ü Change scale by HiHi Lo ALARM ü ü ü Change scale by HiHi LoLo ALARM ü ü ü Change scale by HiHi LoLo ALARM

ü ü ü Change scale byHi LoLo ALARM

LoLo

ALARM

ü No change

Scale change by alarm setting

ü ü ü ü Change scale by HiHi Lo ALARM

No setting ALARM, no change

ü : had setting

3-19 How to ConnectsTL-(A37) Analog Output Cable

200mV

20mA

Lux

Fc2VdB

¢X

HiHi

DATE

TIME

SETTING

SETUP

CLOCK

TRIGGER

CONSECUTIVE

¢X

LoLo

STOP

START

INTV

RANGE

UNIT

FEED

MAX

LINE

MIN

ALARM

RECORD

COM

20mA

60V

MAX

24V

FUSED

MAX

600V

Model Connecting way (DC Input) Connecting way (AC Input) Remark TES-1300 TES-1302 TES-1303 TES-1332 TES-1334 TES-1350 TES-1351 TES-1352 TES-1353 TES-1360

Red lead connect to (V), Black lead connect to (COM) Red lead connect to (V), Black lead connect to (COM) Red lead connect to (V), Black lead connect to (COM) Red lead connect to (V), Black lead connect to (COM) Red lead connect to (V), Black lead connect to (COM) Red lead connect to (V), Black lead connect to (COM) Red lead connect to (V), Black lead connect to (COM) White lead connect to (V), Black lead connect to (COM) White lead connect to (V), Black lead connect to (COM) Red lead connect to (V), Black lead connect to (COM)

No (AC input) No (AC input) No (AC input) No (AC input) No (AC input)

White lead connect to (V), Black lead connect to (COM) White lead connect to (V), Black lead connect to (COM) White lead connect to (V), Black lead connect to (COM) White lead connect to (V), Black lead connect to (COM) White lead connect to (V), Black lead connect to (COM)

AC,DC output

terminal same

AC,DC output

terminal same

AC,DC output

terminal difference

AC,DC output

terminal difference

3-20 Setup Process Transducer (4-20mA) Mode :

Operation way :

Press

INTV

+ Power ON into Process T ransducer (4 - 20 mA) mode.

First of all, settin g Ref1 “ MAX ” refer ence value (t he “MAX” symbo l will be flash) , then press button to inpu t “ MAX ” reference

0.001 ~ 9999, press

0 1/2/3 4/5/6 7/8/9

RECORD

button and wait for speaker sound. Then

the process transducer (4 - 20mA) mode setting is success.

Ref1-0

“ LCD ” display value:

(A/D Reading-4) = “ LCD ” display value

※ Available for (4mA ~ 20mA) transducer only.

4. BATTERY & FUSE REPLACEMENT

4-1 Battery Check & Replacement：

1. As battery power is not sufficient, the , will be shown on LCD replace with six new 1.5V batteries is required.

a). Disconnecting test leads. b).Turning off multimeter with screw-drive r. c). Open battery cover. d). Replace the batteries e). Cover and secure the battery cover.

4-2 Fuse Replacement：

a). Disconnecting test leads. b). Turn off multimeter. c). Open fuse cover with screw-driver. d). Remove old fuse and replace with new fuse. e). Cover and secure the fuse cover.

※ Only 5ψ×20mm fast blow type fuse is allowable.

4-3 Note：

To prevent electrical hazard or shock, turn off multimeter and disconnect test leads before removing any cover.

5. DATALOGGING

5-1 Software Installation：

1. PC Hardware requirements： q HDD 20 MB space, 1.44MB floppy drive r, se rial po rts, 4 86 PC or above,

with COM1, COM2 comports.

q EGA or higher display. q 4M bytes or more memory size.

Hardware installation :

 Switch off all power related to your PC.

 Connect the female socket of RS-232 cable to PC’s COM1 or COM2.

20mA

200mV

F¢X

Lux

¢X

¢X C

¢X

LoLo

GAT

HiHi

INTV

START

DATE

TIME

STOP

0,12 43

765 98

RANGE

SETTING3

UNIT

FEED

MAX

SETUP

LINE

MIN

ALARM

CLOCK

RECORD

TRIGGER,1

, CONSECUTIVE3

COM

20mA

60V

MAX

24V

FUSED

MAX

600V

 Power on.  Connect the male socket of RS-232 cable to Graphic Recorder.

3. Software setup：

 Before setting up software of Graphic Recorder start up windows

95/98 operating system.

 Close all application.

 Insert the installation diskette into drive A: or drive B:.

 Click “ Start ” from Start menu, m ove mouse po inter to “ Ru n ”, then clic k this butt on.



A “ Run ” window appears, then type A:\SETUP or B:\SETUP and press “ OK ”.

 Setup program will run automatically.



Click “NEXT”



a). Click “ NEXT ” or b). If willing to set up on a different folder, click “ Browse ”.



Click “ NEXT ”

5-2 Default Settings :

1. Start up  Run the Graphic Recorder software :

Click “Start” from the “Start” menu, move mouse pointer to “Programs” and then move to “Omega” (Default Settings). Move mouse pointer to “GRAPHER” and then click this button.

 Move mouse pointer to available comport COM1, COM2 then click.

2. RS232 settings

 Baud rate : 9600  Parity : None  Data bits : 8  Stop bit : 1

3. Time Setup : Move mouse pointer to “System Time Set” then click this button

to input time of PC to the

Graphic Recorder.

When “WAIT” (center) disappeared, setup of time is completed.

Also could be set up by “Setup” mode. Refer to P.31  for more details.

4. Memory size : If you have bought more memories :  Move mouse pointer to “Option” then click. Move mouse pointer to

“Memory” and then click this button.

 In the window “MEMORY”, move mouse pointer to “UPDATE” and then

click this button. Input the No.s of IC, and then press OK.

5. ID CODE Setup :

 Move mouse pointer to “Option” then click. Move mouse pointer to

“Memory” and then click this button.

 In the window of “MEMORY” , double click or drag the mouse to

highlight the values of “ID Code”.

 Input the expected values of “ID Code” and then click the button

“ID Code”.

 While “PLEASE WAIT” disappeared, setup of “ID Code” is completed.

6. Setup of sampling rate of the meter :

 Move mouse pointer to “Option” then click. Move mouse to “Setup” and

then click this button.

 In the window “SETUP”, select the option button named “CLOCK” under

the title “MODE”.

 Drag mouse to highlight the values of “INTERVAL”.

 Input the expected values with “HOUR” , “MINUTE” , “SECOND” of

“INTERVAL” then click “SETUP”.

 While the message “Start/Stop REC/PRT with timing ? ” appears, press

“Cancel” at this moment then escape Setup mode.

7. Setup of Input Voltage \ Current

 Move mouse pointer to “Option” then click. Move mouse pointer to

“Setup” and click this button.

 In the window “SETUP”, select the option button named “RANGE”

under the title “MODE”. Under the “RANGE” title, select the expected input Voltage \ Current then escape “SETUP” mode.

8. Setup of Unit  Move mouse pointer to “Option” then click. Move mouse pointer to

“Setup” and click this button.

 In the window “SETUP”, select the option button named “UNIT” under

the title “MODE”. Under the “UNIT” title, select the expected input unit then escape “SETUP” mode.

9. Setup of Alarm :  Move mouse pointer to “Option” then click. Move mouse pointer to

“Setup” and click this button.

 In the window “SETUP”, select the option button named “ALARM” under

the title “MODE”. Under the “ALARM” title, drag mouse to highlight the values of HiHi, Hi, Lo, LoLo. Input the expected values then move mouse pointer to “UPDATE” and click. Escape the “SETUP” window to complete.

10. Setup of Record / Print / Time : (Open up “PANEL” window is required)

 Move mouse pointer to “Option” then click. Move mouse pointer to

“Setup” and click this button.

 In the window “SETUP”, select the option button named “CLOCK” under

the title “MODE”. Under the “CLOCK” title.

A. Setup time of the meter manually :

a). Move mouse pointer to “TIME SET” then click. While the warning

message appears, click “OK”.

b). Drag mouse to highlight the values of YEAR / MONTH / DATE /

HOUR / MINUTE / SECOND under the red title “DATE” or “TIME”.

c). Input the expected values and then click the right bottom button

“SETUP”.

d). While the “START/STOP REC/PRT with timing…….” appears, click

“Cancel” and then escape the “SETUP” mode.

B. Setup time of REC/PRT automatically

a). Drag mouse to highlight the values of HOUR \ MINUTE \ SECOND under

the title “START” then input the expected values.

b) . D rag mouse to highlight the values of HOU R \ M I N UTE \ SE CO N D u n de r

the title “STOP” then input the expected values.

c). Drag mouse to highlight the values of HOUR \ MINUTE \ SECOND under

the title “INTERVAL” then input the expected values.

d). Move mouse pointer to “SETUP” located at right bottom then click this button.

e). While the “START/STOP REC/PRT with timing…….” appears, click

“OK”.

f ). While the P / R signal appears (in the window of “PANEL”), move mouse

pointer to this signal and then click to set up the Start / Stop time of record / print.

11. Setup the print mode of the meter :  Move mouse pointer to “Option” then click. Move mouse pointer to

“Setup” and click this button.

 In the window “SETUP” select the option button named “PRINT MODE” under

the title “MODE”.



Under the “PRINT” title, select a print mode and then click that button.

Escape “SETUP” mode to complete.

5-3 Meter Stand alone Operation :

1. How to clear “ Data Logger ”

ðPress “ RECORD ” + “ POWER ON ”,

the LCD will be show “dEL”.

ðAfter “ POWER ON ”

2. How to do trigger record

ðPress “ RECORD ” button 1 second,

ðRelease “ RECORD ” button the

3. How to consecutive Record/Print (Ⅰ)

, release “ RECORD

”, button.

the LCD

= or

LCD

= or

will be display.

symbol will be cle ar .

ðPress and hold “ RECORD ” or “

PRINT ” button approximate 3 second, the

be display.

= or

symbol will

ðRelease “ RECORD ” or “ PRINT ”

button, the LCD will be disappear.

= or

symbol

4. How to set consecutive Record/Print (Ⅱ)

ð Press “ SETUP ” button

approximate 3 second, the LCD should show “ SET ” symbol.

ðRepeat press

Print/Record/Print, Record function, the LCD will show

ðPress “ SETUP ” button, back to

general mode, the “ SET ” symbol will be clear and shows

5. How to stop consecutive Record/Print (Ⅰ)

ðPress and hold “ RECORD ” or “

PRINT ” button for 3 seconds to stop function.

ðStop consecutive Record/Print

123

= by choice LCD.

function the LCD

clear

Button, choose

=/ / =

=/ /

= or will be

6. How stop consecutive Record/Print (Ⅱ)

ðIf the “ START ” and “ STOP ”

function have been set, the printe will be stopped when “STOP” time is up.

5-4 Download Datalogger (Graphic Recorder èPC)

Move mouse pointer to “Option” then click. Move mouse pointer to “Memory” and then click this button to read recorded data in memory.

As above, the total memory size is 128K, 126.8K remained.

1. Move mouse pointer to “Numbers of Sets” then click this button to show how many sets have been recorded in the memory of Graphic Recorder (EEPROM).

2. Move mouse pointer to “Time of Sets” then click this button. There will be a list that shows the recording time of each set.

3. Move mouse pointer to the list and choose a set then click. The number of

records for this set will be shown.

4. For more details of the chosen set, move mouse pointer to “Show Data”

and then click.

SAVE : To save data recorded in HD and to apply for other applications such as

EXCEL, WORD. For example, P.42

a). Move mouse pointer to “SAVE” then click this button. b). There comes up a dialog box. Input the name of the file if willing to

save as.

c). Click “OK”

5-5 Data Conversion

1. Save data by RS-232 communication port in PC.  Open Graphic Recorder software, check if Graphic Recorder connected and

PC is well. If not the “ NO COM ” signal will be displayed, please be sure RS-232 cable is plugged and secured to COM1 or COM2. After a good connection, the COM1 or COM2 symbol will be showed on the screen.

 Move mouse pointer to “File”, then click. Move mouse pointer to “ SAVE

AS ” then click this button. You can find the “ open file ” dialog box, please change to new file name : *.xls from original file *.dat then press enter. For example : test.xls

 Move mouse pointer to “File”, then click. And move mouse pointer to “

START RECORDING ”, then click this button. The “RECORDING” signal and No.s of PC record will display from 1 up to end.

 To end this record function, move mouse pointe r to “ F il e ”, t hen click. Move

mouse pointer to “ STOP RECORDING ”, click the button. The “ RECORDING ” signal will disappear.

Apply for Excel :



Find the EXCEL type. For example, test.xls. Select test.xls then click

Open Microsoft EXCEL, go to “open file ”, from the searching function.

“open” button.

 From the “ Files of type ”, click the pull down pointer, then choose “All

Files ”, select sample.dat then click “open” button.

 The “ Text Import Wizard ” then appears, click finish button, the selected

data will show in excel type.

5-6 On-Line Operation with PC

1. Switch off all power related to your PC.

2. Connect the socket (female) of RS-232 cable to PC’s COM1 or COM2.

3. Switch on all power.

4. Connect the male socket of RS-232 cable to Graphic Recorder.

5. Run the Grapher software Click “ Start ” from Start menu, move mouse pointer to “ Programs ”, then

move pointer to “Omega” (default), move mouse pointer to “GRAPHER” then click.

Move mouse to available comport (COM1 , COM2) then click.

7. Main tableau

 Time Setup：Move mouse pointer to “ System Time Set ” then click to

input the time of PC to the Graphic Recorder.

When “ WAIT ” (in the center of the windows) disappeared, setup of time is completed.

 RESET：Reset current maximum and minimum values. Move mouse

pointer to “RESET” then click this button to complete.

 Save data in HDD：

a). Move mouse pointer to “File” then click. And move mouse pointer to

“ SAVE AS ” then click this button. There shows a dialog box to open file. Input a file name then press “ OK ”.

b). Move mouse pointer to “File” then click. And move mouse pointer to

“Start Recording”, then click this button. The “Recording” meanwhile from 1 up to end also will show the Numbers of PC recording.

c). If willing to end this recording, please move mouse pointer to “File” then

click. And move mouse pointer to “Stop Recording”, then click this button. The “Recording” signal will disappear.

d). Move mouse point to “File” then click. And move mouse pointer to

“OPEN FILE”, then click this button. There comes a dialog box to open file. Input the saved file name to read.

 To show reading values in “ GRAPH ” type, move mouse pointer to

”Display” then click. And move mouse pointer to “GRAPH” then click this button.

a). Print : to print graph. b). Limit : Move mouse pointer to “ Limit ”, then click this button. There

comes a dialog box. Input the willing setting and then click “ OK ”. The graph page will show which records on each.

 To show reading values in LIST type, move mouse pointer to “Display”

then click. And move mouse pointer to “List” and then click this button to launch.

 PC SAMPLING：(Default : 2 seconds). Change the sampling time of

PC. Move mouse pointer to “Display” then click. And move mouse pointer to “Sample Rate” then click this button.

There shows a dialog box “ Input Sampling Time ”. Input the willing seconds the click “ OK ” to complete this setting.

 Operation of connecting with other meters :

A. Tes meters :

a). Move mouse pointer to “Option” then click. And move mouse pointer

to “Setup” then click this button.

b) In the window “SETUP”, move mouse pointer to “TES METER” which

is under the title “MODE” then click this option button.

c). Select an expected meter and then press “OK” to complete.

B. Other meters not in the list :

a). Move mouse pointer to “Option” then click. And move mouse pointer

to “Setup” then click this button.

b). Comply with the output voltage / current of which meters then refer

to P.27 (7).

c). Comply with the unit of which meters then refer to P.28 (8).

 Process Transducer ( Od Mode )

a). Move mouse pointer to “ Option ” then click. Move mouse pointer to

“ Od Mode ” and then click this button. There shows an “ Input HiHi Alarm ” dialog box. (as below)

b). In this dialog box, input the willing values and then press “ OK ” to

complete.

Omega HH550 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual