Page 1
DIGITAL CAMERA
/
Advanced
Manual
Thank you for purchasing an Olympus digital camera. Before you start to use your new
camera, please read these instructions carefully to enjoy optimum performance and a
longer service life. Keep this manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before taking
important photographs.
In the interest of continually improving products, Olympus reserves the right to update or
modify information contained in this manual.
The screen and camera illustrations shown in this manual were produced during the
development stages and may differ from the actual product.
Detailed explanation for each function such
as camera buttons and menus is separately
provided.
Page 2
How to use this manual
Search for a topic XXXTable of Contents
Contents
How to use this manual............................................................................... 2
Contents...................................................................................................... 3
1 Button operations.................................................8
Test out the functions of the camera buttons by following the illustrations
and actually trying them out on the camera.
o button.....................................Turning the camera on and off 8
Shutter button .........................................................Shooting pictures 8
Mode dial ............. Switching between shooting and playback modes 9
K.............................................................. Shooting still pictures 9
...Shoot pictures by selecting a scene according to the situation
.............................. Follow the shooting guide for setting 9
Search for a term XXXIndex
Index
! Red-eye reduction flash . . . . . 12
# Fill-in flash . . . . . . . . . . . . . . . . . 12
$ Flash off . . . . . . . . . . . . . . . . . . 12
% Super macro mode . . . . . . . . . . 12
& Macro mode . . . . . . . . . . . . . . . 12
F button (exposure compensation)
. . . . . . . . . . . . . . . . . . . . . . . . . . 13
Y button (self-timer) . . . . . . . . . 12
# button (flash mode) . . . . . . . . . 12
& button (macro) . . . . . . . . . . . . 12
button . . . . . . . . . . . . . . . . . . . . 14
button (OK/FUNC) . . . . . . . . . . 10
S button (erase) . . . . . . . . . . . . . . 13
h/ button (digital image stabiliza-
Search by Objective
XXX
Shooting tips and information
BEEP . . . . . . . . . . . . . . . . . . . . . . . 35
BGM . . . . . . . . . . . . . . . . . . . . . . . . 24
BLACK & WHITE . . . . . . . . . . . . . . 26
BRIGHTNESS . . . . . . . . . . . . . . . . 28
C
CALENDAR . . . . . . . . . . . . . . . 26, 27
Calendar display . . . . . . . . . . . . . . . 11
CAMERA MENU . . . . . . . . . . . . . . . 21
Card . . . . . . . . . . . . . . . . . .23
Card access lamp . . . . . . . .55
CCD . . . . . . . . . . . . . . . . . . . . .36
Close-up playback U . . . . . . . . . . . 11
Cloudy day 3 . . . . . . . . . . . . . . . . 21
, 34, 79
, 66, 81
, 75
gP. 3
9
gP. 85
gP. 60
5 Getting to know your camera better
Getting to know your camera better
5
Shooting tips and information
Tips before you start taking pictures
The camera does not turn on even when a battery is loaded
The battery is not fully charged
• Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
• Battery performance declines in low temperatures, and the charge may not be
sufficient to turn on the camera. Remove the battery and warm it by putting it
in your pocket for a while.
2
No picture is taken when the shutter button is pressed
Page 3
Contents
How to use this manual ............................................................................... 2
Contents ...................................................................................................... 3
1 Button operations.................................................8
Test out the functions of the camera buttons by following the illustrations
and actually trying them out on the camera.
o button.....................................Turning the camera on and off 8
Shutter button ......................................................... Shooting pictures 8
Mode dial ............. Switching between shooting and playback modes 9
K..............................................................Shooting still pictures 9
s
...Shoot pictures by selecting a scene according to the situation
g .............................. Follow the shooting guide for setting 9
n.................................................................... Recording movies 9
q .......................Viewing still pictures/Selecting playback mode 9
Arrow pad (1243)......................................................................... 10
o button (OK/FUNC)......................................................................... 10
P/AUTO.......................Shooting pictures with automatic settings 10
m button (MENU)......................................................................... 11
Zoom button.................... Zooming while shooting/close-up playback 11
3# button ...................................................................Flash shooting 12
4& button.............................. Shooting pictures close to the subject 12
2Y button ..........................................................Self-timer shooting 12
1F button ........................................... Changing picture brightness 13
S button ...................................................................Erasing pictures 13
h/P button.....................Stabilizing digital image /Printing pictures 13
h Stabilizing digital image........................................................ 13
< Printing pictures ..................................................................... 13
O button
....Changing the information on display /Display the menu guide
14
9
2 Menu operations .................................................16
Learn everything about the menus, from basic operations to the functions
of each menu and their various settings.
About the menus........................................................................................ 16
Using the menus........................................................................................ 17
Shooting mode menu................................................................................. 19
3
Page 4
IMAGE QUALITY.................................... Changing the image quality 19
RESET..........Change the shooting functions back to default settings 20
s (Scene)
CAMERA MENU................................................................................. 21
WB ...............................................Adjusting the color of a picture 21
ISO..................................................Changing the ISO sensitivity 21
DRIVE ......................................................... Continuous shooting 22
ESP/n
DIGITAL ZOOM ................................Zooming in on your subject 22
AF MODE.........................................Changing the focusing area 23
R ............................................Recording sound with still pictures 23
PANORAMA ..................................Creating a panoramic picture 23
Playback mode menu................................................................................ 24
SLIDESHOW .............................. Playing back pictures automatically 24
MOVIE PLAY ..................................................... Playing back movies 25
CALENDAR ............... Playing back the pictures in a calendar format 26
INDEX........................................ Viewing the pictures as a thumbnail 26
EDIT.................................................................................................... 26
Q .................................................Changing the size of pictures 26
P ...................................................................Cropping a picture 26
REDEYE FIX..................................Fixing the red-eye in pictures 26
BLACK & WHITE .............. Changing pictures to black and white 26
SEPIA .................................... Changing pictures to a sepia tone 26
FRAME ............................. Synthesize the frame and the picture 27
TITLE ....................................Synthesize the title and the picture 27
CALENDAR ............... Synthesize the calendar using the picture 27
LAYOUT................ Making a layout of several recorded pictures 27
BRIGHTNESS.................... Change the brightness of the picture 28
SATURATION......................Change the vividness of the picture 28
INDEX .............................. Making an index picture from a movie 28
EDIT...................................................Cutting a part of the movie 28
PRINT ORDER ............................. Making print reservations (DPOF) 29
PLAYBACK MENU ............................................................................. 29
0................................................................. Protecting pictures 29
y ...................................................................... Rotating pictures 29
R .................................................... Adding sound to still pictures 29
ALBUM ENTRY .............................. Adding pictures to an album 30
ERASE..............................Erase selected pictures/Erase all pictures 31
SEL. IMAGE.........................Erase by selecting the single-frame 31
ALL ERASE
ALBUM ............................... See the pictures registered in the album 31
Album playback menus ............................................................................. 32
4
SEL. ALBUM.............................................................See other album 32
... Shooting pictures by selecting a scene according to the situation
..Changing the area for measuring the brightness of a subject
. Erase all the pictures in the internal memory and the card
20
22
31
Page 5
PLAYBACK MENU ............................................................................. 33
UNDO ENTRY .........................................Undoing album entries 33
SELECT JACKET .........................................Selecting the jacket 33
SETUP menus........................................................................................... 34
MEMORY FORMAT (FORMAT) Formatting the internal memory or card
BACKUP .....Copying pictures in the internal memory to the card 34
W ..............................................Selecting a display language 35
PW ON SETUP ............... Setting the startup screen and volume 35
SCREEN SETUP ..... Registering a picture as the startup screen 35
COLOR ............................ Setting the color of the menu screens 35
BEEP........Adjusting the volume of beep when button is pressed 35
8 ..........................Adjust the volume of camera warning sound 35
SHUTTER SOUND ..... Selecting the sound of the shutter button 35
VOLUME .......................... Adjusting the volume during playback 36
REC VIEW .....................................Viewing pictures immediately 36
FILE NAME ..........................Resetting the file names of pictures 36
PIXEL MAPPING ......... Adjusting the image processing function 36
s ............................................Adjusting the monitor brightness 37
X .......................................................Setting the date and time 37
DUALTIME ......... Setting the date and time in another time zone 37
ALARM CLOCK ....................................................Setting alarms 38
VIDEO OUT ................................. Playing back pictures on a TV 39
u............................................................. Display the histogram 39
FRAME ASSIST...........Display the frame assist/Decide the type 39
3 Printing pictures .................................................40
Learn how to print pictures you have taken.
Direct printing (PictBridge)......................................................................... 41
Using the direct printing function......................................................... 41
EASY PRINT....................................................................................... 41
Other print modes and print settings (CUSTOM PRINT) .................... 43
Print settings (DPOF)................................................................................. 46
How to make print reservations .......................................................... 46
Single-frame reservation..................................................................... 47
All-frame reservation........................................................................... 48
Resetting print reservation data.......................................................... 48
34
5
Page 6
4 Connecting the camera to a computer .............49
Learn how to transfer pictures to a computer and save them.
Flow ........................................................................................................... 49
Using OLYMPUS Master........................................................................... 49
What is OLYMPUS Master? ............................................................... 49
Install the OLYMPUS Master software ............................................... 50
Connecting the camera to a computer ...................................................... 53
Start up the OLYMPUS Master software................................................... 54
Displaying camera images on a computer ................................................ 55
Downloading and saving images........................................................ 55
Viewing still pictures and movies............................................................... 57
Printing pictures......................................................................................... 58
To download and save images to a computer without using OLYMPUS Master
5 Getting to know your camera better .................60
Find out more about your camera and learn what to do when you have a
question regarding operations.
Shooting tips and information.................................................................... 60
Tips before you start taking pictures................................................... 60
The camera does not turn on even when a battery is loaded ...... 60
No picture is taken when the shutter button is pressed ............... 60
The date and time have not been set .......................................... 61
Shooting tips....................................................................................... 61
Focusing on the subject............................................................... 61
Subjects that are difficult to focus on ........................................... 62
To shoot a stabilized digital image............................................... 62
Taking pictures without the flash.................................................. 63
The picture is too grainy............................................................... 63
Taking pictures with the correct color .......................................... 63
Taking pictures of a white beach or snow scene ......................... 64
Taking pictures of a subject against backlight ............................. 64
Additional shooting tips and information ............................................. 64
Increasing the number of pictures that can be taken................... 64
Using a new card ......................................................................... 65
Lamp indicators............................................................................ 66
Extending the useful life of the battery......................................... 66
6
Functions that cannot be selected from menus ........................... 66
59
Page 7
Selecting the optimal record mode............................................... 67
To return the settings of functions to default settings................... 67
Confirming the exposure when the monitor is difficult to see outdoors
Playback help and troubleshooting tips .............................................. 68
To stabilize the blurred picture ..................................................... 68
The blurred image cannot be stabilized ....................................... 68
The red-eye cannot be fixed ........................................................ 68
The picture cannot be registered in the album............................. 68
Playback tips....................................................................................... 69
Playing back the picture in the internal memory .......................... 69
Understanding the settings and other information of pictures taken
Quickly displaying a desired picture............................................. 69
Erasing sound recorded to still pictures ....................................... 69
Viewing pictures on a computer.......................................................... 70
Viewing the entire picture on a computer screen......................... 70
When you get an error message on the camera... .................................... 71
Functions available in shooting modes and scenes .................................. 73
Glossary of terms....................................................................................... 75
... 67
.69
6 Miscellaneous .....................................................77
Read about convenient functions and safety precautions on how to use
your camera more effectively.
Camera care.............................................................................................. 77
Battery and charger ................................................................................... 78
Useful use of the accessories.................................................................... 79
The card.............................................................................................. 79
AC adapter.......................................................................................... 81
Safety Precautions..................................................................................... 82
Index............................................................................................................ 85
7
Page 8
1 Button operations
Ĵijķĵ
ijĵĵĹ
IN
Ĵijķĵ
ijĵĵĹ
IN
Button operations
1
12
Shooting modes
Shooting mode
P
3
1
Playback mode
ʼnŒʼnŒĴijķĵ
[ ]
ȿijĵĵĹ
1 o button Turning the camera on and off
Power on: Shooting mode
Button operations
• Monitor turns on
• Lens extends
Playback mode
• Monitor turns on
2 Shutter button Shooting pictures
Shooting still pictures
Set the mode dial to K or s, and lightly press the shutter button (halfway).
The green lamp lights when the focus and exposure are locked (focus lock). Now
press the shutter button all the way (fully) to shoot a picture.
Green lamp
P
Locking the focus and then composing the
shot (focus lock)
Compose your picture with the focus locked, and
then fully press the shutter button to shoot a picture.
ʼnŒʼnŒĴijķĵ
[ ]
ȿijĵĵĹ
[
• When the green lamp blinks, the focus is not
adjusted properly. Try locking the focus again.
]
IN
44
Recording movies
Set the mode dial to n, and lightly press the shutter button to lock the focus, and
then press the shutter button fully to start recording. Press the shutter button
again to stop recording.
[
]
IN
44
8
Page 9
3 Mode dial Switching between shooting and playback modes
00:36
Set the mode dial to the desired shooting or playback mode.
K Shooting still pictures
The camera determines the optimum settings and shoots the picture.
s
Shoot pictures by selecting a scene according to the situation
You can shoot pictures by selecting a scene according to the situation.
Select the scene/change the scene to another one
• Press the m button to select [SCN] from the top menu, and change it to
another scene.
• By switching to the other scene, most settings will be changed to the default
settings of each scene.
g Follow the shooting guide for setting
GUIDE SHOOTING IJİĴ
IJ
Brightening subject.
ij
Shooting into backlight.
Ĵ
Set particular lighting.
Blurring background.
ĵ
Ķ
Adjusting area in focus.
SET
Follow the shooting guide displayed on the screen to
set the target items.
• To change the setting without using the shooting
guide, set the shooting mode to another one.
• The content set using the shooting guide will change
to the default setting by pressing the m button
OK
or changing the mode using the mode dial.
n Recording movies
Audio is recorded with the movie.
A
00:36
00:36
This lights red during movie recording.
The remaining recording time is displayed.
When the remaining recording time reaches 0,
recording stops.
1
Button operations
q Viewing still pictures/Selecting playback mode
The last picture taken is displayed.
• Press the arrow pad (1243) to view other pictures.
• Use the zoom button to switch among close-up playback, index display and
calendar display.
g Movie playback “MOVIE PLAY Playing back movies” (P. 25)
9
Page 10
76
őİłŖŕŐ
5
4
1
4 Arrow pad (1243)
Use the arrow pad to select scenes, playback picture, and the items on the menus.
5 o button (OK/FUNC)
Button operations
Displays the function menu and sets the functions often used in shooting mode.
This button is also used to confirm your selection.
The functions you can set with the function menu
P/AUTO
.............................................. Shooting pictures with automatic settings
Select the shooting mode when you have set the mode dial to K.
P (Program auto) The camera automatically sets the optimum aperture value
and shutter speed for the brightness of the subject.
AUTO (Full auto mode) The camera automatically sets white balance and ISO
sensitivity in addition to the aperture and shutter speed.
g “WB Adjusting the color of a picture” (P. 21)
“ISO Changing the ISO sensitivity” (P. 21)
“DRIVE Continuous shooting” (P. 22)
“ESP/n Changing the area for measuring the brightness of a subject”
(P. 22)
Function menu
P
P
WB
AUTO
ISO
AUTO
o
őİłŖŕŐ
ESP
h
P
43: Select a setting, and press o.
1
: Select the setting items.
2
10
Page 11
6 m button (MENU)
3264
2448
HQ
3264
2448
HQ
IN
IJijĻĴ ı
Ĩı ķįı Ĵį ijķ
IJı ı Įı ı ıĵ
ʼnŒ
IN
IN
IN
IN
ŔŖŏ
ŎŐŏ
ijııķ
ŕŖņ
ŘņŅ
ŕʼnŖ
ŇœŊ
Ŕłŕ
IJĴIJĵIJĵIJĶIJĶIJķIJķIJĸIJĸ
IJĺ
IJĹ
ijĵ
ijķ
ijĶ
ĴIJ
IJIJ
IJij
IJı
IN
Displays the top menu.
7 Zoom button Zooming while shooting/close-up playback
Shooting mode: Zooming in on your subject
Optical zoom: 3×
Zoom out:
Press W on the
zoom button.
3264
HQ
44
2448
×
3264
2448
HQ
×
Zoom in:
Press T on the
zoom button.
44
1
Button operations
Playback mode: Switching the picture display
Single-frame playback
•
Use the arrow pad (
[
]
IN
ĨıķįıĴįijķ
ŔŖŏ
ŎŐŏ
ŕŖņ
ijııķ
ijķijķijĸijĸijĹijĹIJ ij Ĵ
Ĵ
Ķ ķ ĸ
IJĴ
IJij
IJĺ
ijıijıijIJijIJijijijijijĴijĴijĵ
ijķ
ijĸijĸijĹijĹijĺijĺĴıĴıĴIJ
ij
Ĵ
[
]
IN
T
[
]
IN
IJ
ĵ Ķ ķ
ĸ Ĺ ĺ
T
[
]
IN
T
[
]
IN
IJ ij
Ĵ
ij Ĵ
ĵ
W
Index display
• Use the arrow pad
(1243) to select a
picture for playback, and
press o to play back the
single-frame of the
W
picture selected.
W
W
ŘņŅ
Ĺ ĺ IJı
ĵ Ķ ķ
IJijĻĴı
IJııĮıııĵ
ŕʼnŖ
ŇœŊ
1243
ʼnŒ
) to browse pictures.
TW
WT
ĵ
Close-up playback
• Press T to incrementally
enlarge the picture up to 10
times the original size. Press
W to reduce the size.
• Press the arrow pad
(1243) during close-up
playback to scroll the picture
in the indicated direction.
• When returning to the singleframe playback, press o.
Calendar display
Ŕłŕ
ĵ
• Use the arrow pad (1243)
IJIJ
to select the date, and press
IJĹ
ijĶ
o or T on the zoom button to
IJ
display the pictures on the
[
]
IN
date selected.
11
Page 12
Ĵijķĵ
ijĵĵĹ
IN
a
c
8
b
1
9
0
Self-timer
Macro mode/
Super macro
mode
P
ʼnŒʼnŒĴijķĵ
8 3# button Flash shooting
Press the 3# button in shooting mode to select the flash mode.
Press o for setting.
Flash mode
[ ]
ȿijĵĵĹ
[
]
IN
44
AUTO (Auto-flash) The flash fires automatically in low light or backlight
Button operations
conditions.
! Red-eye reduction flash This emits pre-flashes for red-eye reduction.
# Fill-in flash The flash fires regardless of the available light.
$ Flash off The flash does not fire even in low light conditions.
9 4& button Shooting pictures close to the subject
Press the 4& button in shooting mode to select the macro mode.
Press o for setting.
& Macro mode This mode lets you shoot from as close as
30cm/11.8 in. (when the zoom is set for the
zoom-out angle) and as close as 50cm/19.6
in. (when the zoom is set for the zoom-in
angle) to your subject.
% Super macro mode This mode lets you shoot from as close as
10cm/3.9 in. to your subject.
0 2Y button Self-timer shooting
Press the 2Y button in shooting mode to select on and off of the self-timer.
Press o for setting.
Y ON After the setting, press the shutter button fully.
Y OFF Cancel the self-timer.
• The self-timer lamp lights for approximately 10 seconds, blinks for
approximately 2 seconds, and then the picture is taken.
• To cancel the self-timer, press the 2Y button.
• Self-timer shooting is automatically canceled after one shot.
12
Page 13
a 1F button Changing picture brightness
ijįı
P
ĬĬġ
Ĭġ
ijįı
ijįı
OK
SET
Activate the setting
contents.
Press the 1F button in shooting mode to adjust the
exposure.
• Adjustable from - 2.0EV to +2.0 EV
3: Brighten
4: Darken
b S button Erasing pictures
In playback mode, select the picture you want to erase, and press the S button.
• Once erased, pictures cannot be restored. Check each picture before erasing
to avoid accidentally erasing pictures you want to keep.
g“0 Protecting pictures” (P. 29)
c h/P button Stabilizing digital image /Printing pictures
h Stabilizing digital image
Shooting mode: Shooting with digital image stabilization mode
This function stabilizes the blur caused by a moving subject or camera
movement when taking pictures. To use this function, press the h/< button in
shooting mode.
• Shooting in a dark environment makes ISO higher, which may increase
electrical noise, causing a rough image.
• By switching to the other mode, most settings will be changed to the default
settings of each mode.
Playback mode: Stabilizing the recorded digital image
If the recorded digital image has any blur incurred by camera movement, the
image will be stabilized and saved as a new one. Press the h/< button in the
playback mode and press the o button.
• Pictures shot by the camera other than this camera or pictures edited by the
PC cannot be fixed.
1
Button operations
< Printing pictures
When the printer is connected to the camera, display a picture to be printed out
in playback mode, and press the h/< button.
g“EASY PRINT” (P. 41)
13
Page 14
1
IJijĻĴ ı
Ĩıķ įı Ĵį ijķ
IJı ıĮ ı ıı ĵ
ʼnŒ
IN
ŊŔŐġĵıı
IJijĻĴ ı
Ĩıķ įı Ĵį ijķ
IJı ıĮ ı ıı ĵ
Ĭijįı
ʼnŒ
Ĵijķĵ
ijĵĵĹ
IN
ŊŔŐġĵıı
IJijĻĴ ı
Ĩıķ įı Ĵį ijķ
Ĭijįı
ʼnŒ
IN
ŊŔŐġIJķıı
Ĵijķĵ
ijĵĵĹ
Ĭijįı
IN
ŊŔŐġIJķıı
Ĵijķĵ
ijĵĵĹ
Ĭijįı
IN
IN
d
d O button
Changing the information on display /Display the menu guide
Changing the information displays
Press the O button to change the display in the following order.
Shooting mode
Playback mode
Button operations
ŊŔŐġIJķıı
%
o
n
ŊŔŐġIJķıı
%
o
n
P
ʼnŒʼnŒĴijķĵ
P
ʼnŒʼnŒĴijķĵ
P
[ ]
ȿijĵĵĹ
[ ]
[ ]
ȿijĵĵĹ
[ ]
Normal display
Ĭijįı
$
R
l
[
]
k
IN
44
Simple display
FRAME
Ĭijįı
$
ASSIST
(Horizontal and
R
l
vertical lines or
[
]
k
IN
44
diagonal lines)
Histogram
display
[
]
IN
44
*1
*1*2
*1*2
ĨıķįıĴįijķ
[
[
[
IN
IN
IN
]
ĨıķįıĴįijķ
]
ĨıķįıĴįijķ
]
IJijĻĴı
IJijĻĴı
IJııĮıııĵ
Ĵijķĵ
ȿijĵĵĹ
Ĭijįı
ŊŔŐġĵıı
IJijĻĴı
IJııĮıııĵ
Ĭijįı
ŊŔŐġĵıı
ʼnŒ
ĵ
ʼnŒ
ĵ
ʼnŒ
ĵ
Normal display
Detailed display
No information
display
Histogram
*1
display
*1
Not displayed in case of n.
*2
14
Not displayed when the mode is set [OFF] in the menu.
g “u Display the histogram” (P. 39)
“FRAME ASSIST Display the frame assist/Decide the type” (P. 39)
Page 15
Displaying the menu guide
ES P/
ESP/
n
Sets picture brightness
for taking pictures.
With menu items selected, hold down the O button to
display the menu guide. Release the O button to close
the menu guide.
1
Button operations
15
Page 16
2 Menu operations
SCN
Ŕ ņ ŕ Ŗ ő
RESET
IMAGE
QUALITY
SCN
ńłŎņœł
ŎņŏŖ
INDEX
SLIDESHOW
EDIT
ERASE
SETUP
CALENDAR
PLAYBACK
MENU
PRINT
ORDER
ALBUM
CA MER A M ENU
PL AYBA CK ME NU
Menu operations
2
MENU
o
Shooting modes
button
Mode Dial
Arrow pad
(1243)
2
About the menus
Playback mode
Press the m button to display the top menu.
The items displayed on the top menu differ according to the mode.
• When the mode dial is set at g, press the m button to display the
shooting guide screen.
Menu operations
Top menu in the
shooting mode
IMAGE
IMAGE
QUALITY
QUALITY
ńłŎņœł
ńłŎņœł
RESET
RESET
ŎņŏŖ
ŎņŏŖ
SCN
SCN
SCN
MENU
EXIT
IJ
WB
ij
ISO AUTO
DRIVE
DIGITAL ZOOM
MENU
BACK
AUTO
o
ESP
OFF
SET
ŔņŕŖő
ŔņŕŖő
OK
SET
• When [CAMERA MENU], [PLAYBACK
MENU], [EDIT], [ERASE], or [SETUP] is
selected, the menu corresponding to the
respective functions is displayed.
OK
Top menu in the
playback mode
SLIDE-
SLIDE-
EDIT
EDIT
SHOW
SHOW
PLAYBACK
PLAYBACK
CALENDAR
CALENDAR
MENU
MENU
INDEX
INDEX
ERASE
ERASE
MENU
EXIT
0
y
R
ALBUM ENTRY
MENU
BACK
PRINT
PRINT
P
ORDER
ORDER
SETUP
SETUP
ALBUM
ALBUM
SET
OFF
ˌɋ
SET
OK
OK
16
Menu displayed when
[CAMERA MENU]
is selected
Menu displayed when
[PLAYBACK MENU]
is selected
Page 17
Using the menus
SCN
Ŕ ņ ŕ Ŗ ő
RESET
IMAGE
QUALITY
SCN
ńłŎņœł
ŎņŏŖ
CA MER A M ENU
CA MER A M ENU
Use the arrow pad (1243) and o to set menu items.
This explains how to use the menus with the [AF MODE] setting as an example.
Set the mode dial to the desired mode.
• In this case, set the mode dial to K.
1 Press the m button to
display the top menu, and
then press o.
• [AF MODE] is on a menu in
[CAMERA MENU]. Press o.
• To display other menus, use the
arrow pad (1243) to select a
menu, and press o.
• To close the top menu, press the
m button.
Top menu
IMAGE
IMAGE
QUALITY
QUALITY
ńłŎņœł
ńłŎņœł
ŔņŕŖő
ŎņŏŖ
ŎņŏŖ
SCN
SCN
SCN
ŔņŕŖő
SET
OK
Operation
guide
m button
RESET
RESET
MENU
EXIT
1243 on
the arrow pad
o
2 Press 12 to select a setting,
and press o.
• [AF MODE] is the sixth menu
item, so press 2 five times, and
then press o.
• Unavailable settings cannot be
selected.
o
m button
This mark is
displayed when
there are more
menu items on
the next page.
The selected
item is
displayed in a
different color.
IJ
WB
ij
ISO AUTO
DRIVE
DIGITAL ZOOM
MENU
BACK
2
IJ
AF MODE SPOT
ij
R
PANORAMA
MENU
BACK
AUTO
o
ESP
OFF
SET
OFF
SET
1
2
Menu operations
OK
o
o
OK
17
Page 18
3 Press 12 to select a setting,
CA MER A M ENU
CA MER A M ENU
2
Menu operations
and press o.
• Select the [AF MODE] from
[iESP] and [SPOT] and then
press o.
• The menu item is set and the
previous menu is displayed.
o
o
18
IJ
ij
BACK
Page display
WB
IJ
ij
ISO AUTO
DRIVE
DIGITAL ZOOM
MENU
BACK
AF MODE
R
PANORAMA
MENU
AUTO
o
ESP
OFF
SET
ŪņŔő
SPOT
OK
SET
When there are more menu items on the next
page, press 4 on the procedure 2 screen to
move the cursor to the page display.
Press 12 to change the page.
To return to the previous page, press 3 or o.
OK
Page 19
Shooting mode menu K s n
SCN
Ŕ ņ ŕ Ŗ ő
RESET
IMAGE
QUALITY
SCN
ńłŎņœł
ŎņŏŖ
1
IMAGE
IMAGE
QUALITY
RESET
RESET
EXIT
MENU
QUALITY
ńłŎņœł
ńłŎņœł
ŎņŏŖ
ŎņŏŖ
SCN
SCN
SCN
3
ŔņŕŖő
ŔņŕŖő
SET
*2
*1
2
*1
[RESET] cannot be selected when the
mode dial is set to s.
*2
s can be selected when the mode
dial is set to s.
4
OK
WB
ISO
DRIVE
ESP/n
CAMERA MENU
*3
A card is required.
g “SETUP menus” (P. 34)
• Some functions are not available according to the selected mode.
g “Functions available in shooting modes and scenes” (P. 73)
• The factory default settings are displayed in gray ( ).
1 IMAGE QUALITY Changing the image quality
Still picture image quality and their applications
Image quality/Image size
SHQ 3264
× 2448 Low
HQ 3264 × 2448 Standard
SQ1 2560 × 1920 Standard
2304 × 1728
× 1536
2048
SQ2 1600
× 1200 Standard
1280 × 960
1024 × 768 • This is useful for sending as e-mail
640 × 480 Low
Compression Application
• This is useful for printing large images
compression
on full-size paper.
• This is useful for performing computer
compression
image processing, such as contrast
adjustment and red-eye correction.
• This is useful for postcard-sized prints.
compression
• This is useful for computer editing
such as rotating or adding text to a
picture.
• This is useful for viewing pictures on a
compression
computer.
attachments.
compression
Movie image quality
Image quality/Image size
SHQ 640 × 480
HQ 320 × 240
SQ 160 × 120
DIGITAL ZOOM
AF MODE
R
PANORAMA
*3
2
Menu operations
19
Page 20
2 RESET Change the shooting functions back to default settings
NO /YES
Restore shooting functions back to default settings. The mode dial has to be set
to K (P or AUTO) in order to restore default settings.
Functions for returning the settings to the original when the reset
function is executed
2
Flash AUTO P. 12
& OFF P. 12
YYOFF P. 12
F 0.0 P. 13
IMAGE QUALITY HQ P. 19
WB AUTO P. 21
Menu operations
ISO AUTO P. 21
DRIVE o P. 22
ESP/n ESP P. 22
DIGITAL ZOOM OFF P. 22
AF MODE SPOT P. 23
R OFF P. 23
Function Factory default setting Ref. Page
3 s (Scene)
Shooting pictures by selecting a scene according to the situation
The scene selection screen displays sample images
and the shooting mode to best suit the situation.
• By switching to the other scene, most settings will be
changed to the default settings of each scene.
20
Scene selection
IJȁPORTRAIT
B
F
D
G
U
BACK
MENU
SET
OK
Press o to decide the scene.
Page 21
[e SHOOT & SELECT1] / [f SHOOT & SELECT2]
•
Press and hold the shutter button to shoot sequential pictures. After shooting
pictures, select the ones you want to erase, put the
R
to them, and press S
button to erase them.
ee
Selected picture
Press 43 to scroll through the pictures.
MENU
OK
BACK ERASE
SET
S
Pictures with a
R mark are erased.
Select the pictures to be erased.
4 CAMERA MENU
WB
......................................................................... Adjusting the color of a picture
AUTO The white balance is adjusted automatically for natural
5 Sunny day For shooting under a clear sky.
3 Cloudy day For shooting under a cloudy sky.
1 Tungsten light For shooting under tungsten lighting.
w Fluorescent
lamp 1
x Fluorescent
lamp 2
y Fluorescent
lamp 3
color, regardless of the light source.
For shooting under daylight fluorescent lighting. (This
type of lamp is mainly used in homes.)
For shooting under a neutral white fluorescent lamp.
(This type of lamp is mainly used in desk lamps.)
For shooting under a white fluorescent lamp. (This type
of lamp is mainly used in offices.)
2
Menu operations
ISO..............................................................................Changing the ISO sensitivity
AUTO Sensitivity is automatically adjusted according to the conditions
64/100/200/
400/800/
1600/3200
• When the camera is set to [3200], the [IMAGE QUALITY] is limited to
[2048 × 1536] or less.
of the subject.
A low value lowers the sensitivity for daylight shooting of clear,
sharp pictures. The higher the value, the better the camera’s
light sensitivity and ability to shoot with a fast shutter speed and
in low light conditions. However, high sensitivity introduces noise
into the resulting picture, which may give it a grainy appearance.
21
Page 22
DRIVE.................................................................................... Continuous shooting
Ĵijķĵ
ijĵĵĹ
IN
Ĵijķĵ
ijĵĵĹ
IN
o Shoots 1 frame at a time when the shutter button is pressed.
i You can take a sequence of pictures at one time while holding
The camera will take pictures in sequence until you release the shutter button.
• In high speed sequential shooting, [IMAGE QUALITY] will be limited to below
[2048 × 1536].
ESP/n ............. Changing the area for measuring the brightness of a subject
2
down the shutter button.
ESP Meters the brightness at the center of the monitor and the
surrounding area separately to create a picture with balanced
brightness. When taking pictures against strong backlight, the
center of the picture may appear dark.
n Only the center of the monitor is metered. Suitable for taking a
picture of the subject in the center of the monitor against backlight.
Menu operations
DIGITAL ZOOM....................................................... Zooming in on your subject
OFF /ON
The digital zoom can be used to take close-up pictures with stronger
magnification than the optical zoom. (Optical zoom × Digital zoom: the maximum
15×)
Optical zoom Digital zoom
P
ʼnŒʼnŒĴijķĵ
[ ]
ȿijĵĵĹ
[
]
IN
44
White area: The optical zoom area
Red area: The digital zoom area
P
ʼnŒʼnŒĴijķĵ
[ ]
ȿijĵĵĹ
[
]
IN
44
Zoom bar
22
Page 23
AF MODE .................................................................. Changing the focusing area
iESP The camera determines which subject within the screen to focus
SPOT Focus selection is based on the subject within the AF target mark.
on. Even when the subject is not in the center of the screen,
focusing is possible.
R...................................................................... Recording sound with still pictures
OFF /ON
Recording starts about 0.5 seconds after the shutter button is released and lasts
about 4 seconds.
When recording, aim the camera microphone at the source of the sound you
want to record.
PANORAMA...........................................................Creating a panoramic picture
Panorama shooting lets you create a panoramic picture, using the OLYMPUS
Master software from the provided CD-ROM. An Olympus xD-Picture Card is
required for panorama shooting.
Connects pictures from
left to right
3: The next picture is connected at the
right edge.
4: The next picture is connected at the
left edge.
Use the arrow pad (1243) to specify at which edge you want to connect the
pictures, and then compose your shots so that the edges of the pictures overlap.
The part of the previous picture where it will be joined to the next picture does
not remain in the frame. You have to remember what the part in the frame looked
like and take the next picture so it overlaps.
Connects pictures from
bottom to top
1: The next picture is connected at the
top.
2: The next picture is connected at the
bottom.
2
Menu operations
Panorama shooting is possible for up to 10 pictures. Press o button to exit
panorama shooting.
23
Page 24
Playback mode menu q
INDEX
MOVIE
EDIT
ERASE
SETUP
CALENDAR
YBAC
MENU
PRINT
ORDER
ALBUM
INDEX
SLIDESHOW
EDIT
ERASE
SETUP
CALENDAR
PLAYBACK
MENU
PRINT
ORDER
ALBUM
When a still picture is selected
*1*3
5
6
2
Menu operations
*1
EDIT
Q
P
REDEYE FIX
BLACK & WHITE
SEPIA
FRAME
TITLE
CALENDAR
LAYOUT
BRIGHTNESS
SATURATION
*1
EDIT
INDEX
EDIT
SLIDE-
SLIDE-
1
SHOW
SHOW
3
CALENDAR
CALENDAR
4
INDEX
INDEX
MENU
EXIT
When the move is selected
MOVIE
MOVIE
2
PLPLAY
PLAY
PLPLAYBAC
CALENDAR
CALENDAR
INDEX
INDEX
MENU
EXIT
PLAYBACK
3
4
EDIT
EDIT
PLAYBACK
PLAYBACK
MENU
MENU
ERASE
ERASE
8
5
EDIT
EDIT
MENU
MENU
ERASE
ERASE
8
7
K
PRINT
PRINT
ORDER
ORDER
SETUP
SETUP
ALBUM
ALBUM
SET
97
PRINT
PRINT
ORDER
ORDER
SETUP
SETUP
-
ALBUM
ALBUM
SET
9
P
OK
*1
0
y
R
ALBUM ENTRY
*1A picture card is
required.
*2This is not
displayed when a
movie is selected.
OK
*1
*3This is not
selected when the
movie is selected.
g “SETUP menus” (P. 34)
• The factory default settings are displayed in gray ( ).
1 SLIDESHOW Playing back pictures automatically
SLIDESHOW
BGM
TYPE
OFF
ON
• Set [BGM] to [ON] or [OFF].
[IN]
• Select the transition effect between pictures from
[TYPE].
PLAYBACK
MENU
*2
*2
*1
24
BACK
MENU
SET
OK
BGM
TYPE NORMAL
ON / OFF
SCROLL
FADER
SLIDE
ZOOM DOWN
ZOOM UP
CHECKERBOARD
BLINDS
SWIVEL
RANDOM
Page 25
• Only the first frame of each movie is displayed.
IJijĻ Ĵı
Ĩı ķį ı Ĵį ijķ
IJı ı Į ı ı ı ĵ
IN
IJijĻ Ĵı
Ĩı ķį ı Ĵį ij ķ
IJ ıı Į ı ı ı ĵ
ııĻıı
ııĻĴķ
IN
ııĻıĶ
ııĻĴķ
IN
• After setting [BGM] and [TYPE], press o to start the slideshow.
•Press o or m button to cancel the slideshow.
2 MOVIE PLAY Playing back movies
Select [MOVIE PLAY] from the top menu, and press o to play back the movie.
Another option is to select a picture with the movie icon (n), and press o to
play back the movie.
[
]
IN
2
Menu operations
ĨıķįıĴįijķ
MOVIE PLAY
OK
IJijĻĴı
IJııĮıııĵ
ĵ
Operations during movie playback
[
]
IN
Playing time/Total recording time
IJııĮıııĵ
ııĻıı
ȟııĻĴķ
IJijĻĴı
1 : Increases the volume.
2 : Reduces the volume.
ĨıķįıĴįijķ
3 : Each time you press the button, the playback speed changes
in the following order: 2×; 20×; and back to 1×.
4 : Plays the movie in reverse. Each time you press the button, the
playback speed changes in the following order: 2×; 20×; and
back to 1×.
•Press o to pause the playback.
Operations during pause
[
]
IN
ııĻıĶ
ȟııĻĴķ
3 : Displays the next frame.
4 : Displays the previous frame.
• To resume the movie, press o.
1 : Displays the first frame.
2 : Displays the last frame.
• To cancel the playback of the movie in the middle of it or during pause, press
the m button.
25
Page 26
3 CALENDAR Playing back the pictures in a calendar format
This function lets you play back the pictures in a calendar format by the date of
recording.
g “Zoom button Zooming while shooting/close-up playback” (P. 11)
4 INDEX Viewing the pictures as a thumbnail
This function lets you view the pictures in 9 frames at the same time.
g “Zoom button Zooming while shooting/close-up playback” (P. 11)
2
5 EDIT
This function lets you edit still pictures saved on a card and store them as new
pictures.
Q
............................................................................ Changing the size of pictures
Menu operations
640 × 480 /320 × 240
This changes the image size of a picture and saves it as a new file.
P ................................................................................................Cropping a picture
Crop a picture, and save the cropped picture as a new picture.
•Use 43 to select a picture to be cropped and press o.
• Press the arrow pad (1243) or zoom button, adjust
the position and size of the area-selection box and press
o.
O
SET
OK
REDEYE FIX...........................................................Fixing the red-eye in pictures
This function corrects the red-eye look that often occurs when taking pictures
with a flash.
BLACK & WHITE....................................Changing pictures to black and white
This changes the picture to black and white and saves it as a new file.
SEPIA ...............................................................Changing pictures to a sepia tone
This changes the picture to sepia and saves it as a new file.
26
Page 27
FRAME........................................................Synthesize the frame and the picture
ŜŹŅŞ
This function lets you select the frame, and synthesize the frame and the picture,
and store it as a new picture.
FRAME
• Select a frame with 43 and press o .
ŜŹŅŞ
• Select the picture to be synthesized with the frame with
43, and press o. (Press 12 to turn the picture 90
degrees clockwise or 90 degrees counterclockwise.)
• Press the arrow pad (1243) and the zoom button to
ŘOŕ
OK
SETMOVE
adjust the position and size of the picture, and press o.
TITLE ..............................................................Synthesize the title and the picture
This function lets you select the title, synthesize the title and the picture, and store
it as a new picture.
TITLE
• Select the picture with 43, and press o.
• Select the title with 43, and press o. (Press 12 to
turn the title 90 degrees clockwise or 90 degrees
counterclockwise.)
• Press the arrow pad (1243) and the zoom button to
OK
SET
adjust the position and size of the picture, and press o.
• Set the color of the title with the arrow pad (1243),
and press o.
CALENDAR ...................................... Synthesize the calendar using the picture
This function lets you select the calendar, synthesize the calendar and the
picture, and store it as a new picture.
CALENDAR ŜŹŅŞ
• Select the picture with 43, and press o.
• Select the calendar with 43, and press o. (Press 12
to turn the picture 90 degrees clockwise or 90 degrees
counterclockwise.)
• Set the date of the calendar, and press o.
OK
SET
2
Menu operations
LAYOUT........................................ Making a layout of several recorded pictures
ALL IMAGES Layout of the all pictures stored in the card will be made.
ALBUM The picture you want to make layout is selected from the album.
CALENDAR
SEL. IMAGE
LAYOUT
ALL IMAGES
ALBUM
CALENDAR
SEL. IMAGE
MENU
BACK
A monthly calendar appears and the pictures you want to make
layout are selected by the date.
Pictures that you want to make layout are specified one by one.
•Use 43 to select a layout pattern and press o.
• Select the picture type you want to make layout and press
o.
• Select the picture and press o. (When [SEL. IMAGE] is
selected, press 12 to turn the picture 90 degrees
OK
SET
clockwise or 90 degrees counterclockwise.)
27
Page 28
BRIGHTNESS...........................................Change the brightness of the picture
00:00
00:36
00:00
00:36
This function lets you adjust the brightness of the picture, and store it as a new
picture.
BRIGHTNESS ŜŹŅŞ
• Select the picture with 43, and press o.
• Adjust the brightness with 12, and press o.
MENU
BACK
2
SATURATION.............................................Change the vividness of the picture
SET
OK
This function lets you adjust the vividness of the picture, and store it as a new
picture.
SATURATION ŜŹŅŞ
• Select the picture with 43, and press o.
• Adjust the vividness with 12, and press o.
Menu operations
BACK
MENU
SET
OK
INDEX ........................................................Making an index picture from a movie
This extract 9 frames from a movie and saves them as a new picture (INDEX).
00:00
/00:36
00:00/ 00:36
•Use 43 to select a movie and press o.
• Use the arrow pad (1243) to select the head frame
and press o. Select the last frame in the same way and
press o.
OK
SET
EDIT ..............................................................................Cutting a part of the movie
Select a part of the movie you wish to save, overwrite the original file with it, or
save it as a new file.
00:00
/00:36
00:00/ 00:36
• Select [NEW FILE] or [OVERWRITE] and press o.
• Use the arrow pad (1243) to select the head frame
and press o. Select the last frame in the same way and
press o. Your selection is now saved.
OK
SET
28
Page 29
6 PRINT ORDER Making print reservations (DPOF)
PL AYBA CK ME NU
This function allows you to save printing data (the number of prints and the date
and time information) with the pictures stored on the card.
g“Print settings (DPOF)” (P. 46)
7 PLAYBACK MENU
..............................................................................................Protecting pictures
0
OFF /ON
Protected pictures cannot be erased with [ERASE]/
0
ŜŊŏŞ
[SEL.IMAGE]/[ALL ERASE], but they are all erased by
OFF
ON
EXIT
formatting.
• Select the picture with 43, and protect it by selecting [ON]
with 12. You can protect several frames in succession.
OK
y....................................................................................................Rotating pictures
2
Menu operations
+90° /
0° / -90°
Pictures taken with the camera held vertically are displayed horizontally. This function
lets you turn such pictures so that they are displayed vertically. New picture
orientations are saved even when the power is turned off.
y
+90°
ȼĺıɋ
Ƚĺıɋ
ıɋ
SET
ŜŊŏŞy
OK
ȼĺıɋ
Ƚĺıɋ
ıɋ
SET
ŜŊŏŞ
OK
0° -90°
R................................................................................Adding sound to still pictures
0
y
R
ALBUM ENTRY
MENU
BACK
START
Sound is recorded for about 4 seconds.
• When [START] is displayed, aim the camera microphone
at the source of the sound you want to record, and press
o.
• Recording starts and the [BUSY] bar is displayed during
OK
SET
recording.
ȼĺıɋ
Ƚĺıɋ
ıɋ
SET
ŜŊŏŞ
OK
29
Page 30
ALBUM ENTRY......................................................Adding pictures to an album
ŔŖŏ
ŎŐŏ
ijııķ
ŕŖņ
ŘņŅ
ŕʼnŖ
ŇœŊ
Ŕłŕ
IJĴIJĵIJĵIJĶIJĶIJķIJķIJĸIJĸ
IJĺ
IJĹ
ijĵ
ijķ
ijĶ
ĴIJ
IJIJ
IJij
IJı
xD
IJ ı
IJ IJ
IJ ij
ŜŹŅŞ
SE L. ALB UM
Pictures recorded to the card can be organized by sorting them into albums.
Pictures stored in the internal memory cannot be entered in albums.
g“Album playback menus” (P. 32)
Select the album
entry method
ALBUM ENTRY
ŜŹŅŞ
2
Menu operations
SEL. IMAGE
SET CALENDAR
SET ALL
MENU
BACK
Select an album to
add the pictures
SEL. ALBUM
SEL. ALBUM
IJ
MENU
BACK
SET
SET
ŜŹŅŞ
ŜŹŅŞ
[SEL. IMAGE]
SEL. IMAGE ŜŹŅŞ
OK
SET
IJ
Ķ
ĺ
Ĵ ĵ
ķijĸ
IJı
IJIJ
OKOK
EXIT HOLD
[SET CALENDAR]
ŔŖŏ
ŎŐŏ
ŕŖņ
ŘņŅ
ijııķ
Ĵ
OK
ŕʼnŖ
ijķijķijĸijĸijĹijĹIJ ij Ĵ
Ķ ķ ĸ
Ĺ ĺ IJı
IJĴ
IJij
IJĺ
ijıijıijIJijIJijijijijijĴijĴijĵ
ijķ
ijĸijĸijĹijĹijĺijĺĴıĴıĴIJ
ĵ Ķ ķ
ij
Ĵ
Select one frame at a time
for entry
•
Use the arrow pad (
Ĺ
to select a picture, and press
IJij
o
to add R.
•Press o again to cancel the
selection.
• When the selection is
completed, press o for a
while.
ŇœŊ
Ŕłŕ
Add pictures taken on the
ĵ
IJIJ
same day
IJĹ
Use the arrow pad (1243)
ijĶ
IJ
to select the date with pictures
[
]
xD
to enter in the album, and
1243
)
press o.
[SET ALL]
SET ALL
BACK
PHOTO
MOVIE
0
MENU
SET
Select all still images, all
ŜŹŅŞ
protected images, or all
movies
OK
30
Page 31
8 ERASE Erase selected pictures/Erase all pictures
=Z& ?
SE L. ALB UM
43
Protected pictures cannot be erased. Cancel protection before erasing protected
pictures. Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
• When erasing the picture in the internal memory, do not insert the card into the
camera.
• When erasing the picture from the card, insert a card into the camera in
advance.
SEL. IMAGE ................................................ Erase by selecting the single-frame
S
SEL. IMAGE
MENU
SET
BACK
ALL ERASE
• Select [YES], and press o.
ŜŊŏŞ
• Use the arrow pad (1243) to select the picture, and
press o to put R.
• To cancel the selection, press o again.
• When the selection is completed, press S button.
OK
ERASE
• Select [YES], and press o.
S
................. Erase all the pictures in the internal memory and the card
9 ALBUM See the pictures registered in the album
Use the arrow pad
(1243) to select an
album, and press o.
=Z&?
SEL. ALBUM
SEL. ALBUM
MENU
BACK
=Z&?
OK
SET
Use the arrow pad (12
display picture you want.
) to
2
Menu operations
31
Page 32
Album playback menus
INDEX
MOVIE
EDIT
ERASE
SETUP
SEL. ALBUM
YBAC
MENU
PRINT
ORDER
CLOSE
ALBUM
INDEX
SLIDESHOW
EDIT
ERASE
SETUP
SEL. ALBUM
YBAC
MENU
PRINT
ORDER
CLOSE
ALBUM
• A card is required.
When the still picture is selected
2
PRINT
EDIT
EDIT
PLPLAYBAC
PLAYBACK
MENU
MENU
ERASE
ERASE
EDIT
EDIT
PLPLAYBAC
PLAYBACK
MENU
MENU
ERASE
ERASE
K
CLOSE
CLOSE
ALBUM
ALBUM
SET
2
ORDER
ORDER
K
SET
PRINT
P
ORDER
ORDER
SETUP
SETUP
PRINT
PRINT
SETUP
SETUP
CLOSE
CLOSE
ALBUM
ALBUM
PLAYBACK MENU
0
OK
*1
y
*1*2
R
UNDO ENTRY
SELECT JACKET
*1This is not displayed
when the movie is
selected.
*2The still pictures
registered in the album
cannot be recorded.
OK
SLIDE-
SLIDE-
SHOW
SHOW
1
SEL. ALBUM
SEL. ALBUM
INDEX
2
INDEX
EXIT
MENU
When the move is selected
MOVIE
MOVIE
PLPLAY
1
PLAY
SEL. ALBUM
SEL. ALBUM
INDEX
INDEX
MENU
EXIT
Menu operations
g “SLIDESHOW Playing back pictures automatically” (P. 24)
“MOVIE PLAY Playing back movies” (P. 25)
“Print settings (DPOF)” (P. 46)
“SETUP menus” (P. 34)
“ERASE Erase selected pictures/Erase all pictures (P. 31)
1 SEL. ALBUM See other album
To switch albums, select the desired album from [SEL. ALBUM].
g “ALBUM See the pictures registered in the album” (P. 31)
32
Page 33
2 PLAYBACK MENU
ŜŹŅŞ
IJ ı
IJ IJ
IJ ij
SE L. ALB UM
UNDO ENTRY
.................................................................. Undoing album entries
Even if a picture is removed from an album, the picture remains in the card.
SEL. IMAGE Select one frame at a time to undo.
OKOK
EXIT HOLD
=Z&?
• Press the arrow pad (1243) to select a picture,
and press o to add R.
• Press o again to cancel the selection.
• When the selection is completed, press o for a
while.
SEL. IMAGE
SET
UNDO ALL Undo all pictures in the album
SELECT JACKET.................................................................Selecting the jacket
You can change the jacket (first frame in the album) to be
ŜŹŅŞ
ķIJĸ
ŜŹŅŞ
Ĵ
IJIJ
SET
displayed on the album selection screen.
ĵ
Ĺ
IJij
OK
SEL. ALBUM
SEL. ALBUM
SEL. ALBUM
Ķ
ĺijIJı
MENU
BACK
Title image (first frame in the album)
Other album menus
g “0 Protecting pictures” (P. 29)
“y Rotating pictures” (P. 29)
2
Menu operations
33
Page 34
SETUP menus
SCN
Ŕ ņ ŕ Ŗ ő
RESET
IMAGE
QUALITY
SCN
ńłŎņœł
ŎņŏŖ
INDEX
SLIDESHOW
EDIT
ERASE
SETUP
CALENDAR
PLAYBACK
MENU
PRINT
ORDER
ALBUM
Shooting mode
IMAGE
IMAGE
QUALITY
QUALITY
ńłŎņœł
ńłŎņœł
ŔņŕŖő
ŎņŏŖ
ŎņŏŖ
SCN
SCN
SCN
EDIT
EDIT
PLAYBACK
PLAYBACK
MENU
MENU
ERASE
ERASE
ŔņŕŖő
SET
PRINT
PRINT
P
ORDER
ORDER
SETUP
SETUP
ALBUM
ALBUM
SET
OK
OK
2
RESET
RESET
MENU
EXIT
Playback mode
SLIDE-
SLIDE-
SHOW
SHOW
CALENDAR
CALENDAR
INDEX
INDEX
MENU
EXIT
Menu operations
*1 A card is required.
*2 [SCREEN SETUP] can be selected when
playing back still pictures.
*3 You cannot select this item in shooting mode.
*4 You cannot select this item when the mode
dial is set to A.
*5 You cannot select this item in playback mode.
MEMORY FORMAT (FORMAT)
........... Formatting the internal memory or card
SETUP
MEMORY FORMAT
(FORMAT
BACKUP
W
PW ON SETUP
SCREEN SETUP
COLOR
BEEP
8
SHUTTER SOUND
VOLUME
REC VIEW
FILE NAME
PIXEL MAPPING
s
X
DUAL TIME
ALARM CLOCK
VIDEO OUT
u
FRAME ASSIST
*4*5
*1
)
*1
*3
*4
*5
*4*5
All existing data, including protected pictures, are erased when the internal
memory or card is formatted. Make sure that you save or transfer important data
to a computer before formatting the card.
• Make sure there is no card inserted in the camera when formatting the internal
memory.
• When the internal memory is formatted, the data of the frames and titles
downloaded with the provided OLYMPUS Master software will be deleted.
• Be sure that the card is inserted in the camera when formatting the card.
• Before using non-Olympus cards or cards which have been formatted on a
computer, you must format them with this camera.
*2
*4*5
*5
34
BACKUP........................... Copying pictures in the internal memory to the card
Insert the optional card into the camera. Copying data does not erase the picture
in the internal memory.
• It takes some time to back up data. Check if the battery is not empty before
starting the copy, or use the AC adapter.
Page 35
W ......................................................................... Selecting a display language
You can select a language for on-screen display. Available languages vary
depending on the area where you purchased this camera.
You can add other languages to your camera with the provided OLYMPUS
Master software.
PW ON SETUP ...................................... Setting the startup screen and volume
SCREEN
VOLUME OFF (No sound) / LOW / HIGH
You can select the volume level and the picture displayed when the camera is
turned on. If [SCREEN] is set to [OFF], [VOLUME] cannot be set.
OFF (No picture is displayed.) /
1 / 2 (The picture registered with
[SCREEN SETUP] is displayed.)
SCREEN SETUP........................... Registering a picture as the startup screen
Still pictures in the internal memory or the card can be registered to screen [2] for
[PW ON SETUP].
If a picture is already registered, the [IMAGE EXISTING] screen is displayed
asking if you want to cancel the currently registered picture and register a new one.
COLOR......................................................Setting the color of the menu screens
NORMAL /BLUE /BLACK / PINK
BEEP...............................Adjusting the volume of beep when button is pressed
OFF (No sound) /
LOW / HIGH
8.....................................................Adjust the volume of camera warning sound
OFF (No sound) /
LOW / HIGH
SHUTTER SOUND .......................... Selecting the sound of the shutter button
OFF (No sound)
1 LOW / HIGH
2LOW / HIGH
3LOW / HIGH
2
Menu operations
35
Page 36
VOLUME.................................................. Adjusting the volume during playback
OFF (No sound) / 1 / 2 / 3/ 4/ 5
REC VIEW.............................................................. Viewing pictures immediately
OFF The picture being recorded is not displayed. This is useful when you
2
ON The picture being recorded is displayed. This is useful for making a
want to prepare for your next shot while the previous picture is being
recorded.
brief check of the picture you have just taken. You can resume
shooting while the picture is still being displayed.
FILE NAME..................................................Resetting the file names of pictures
RESET
Menu operations
AUTO
File names and their folder names for recorded pictures are automatically
generated by the camera. File names and folder names respectively include file
numbers (0001 to 9999) and folder names (100 to 999), and are named as
follows.
This method is useful when grouping files on separate cards.
The file number and folder number are reset every time a new card
is inserted in the camera. The folder number returns to [No. 100]
and the file number returns to [No. 0001].
This method is useful when you want to manage all your files
with sequential numbers.
Even if a new card is inserted, the folder number and file number are
retained from the previous card. This helps you to manage multiple
cards.
File nameFolder name
\DCIM\***OLYMP\Pmdd****.jpg
Folder No.
(100 – 999)
Month: Jan. – Sep. = 1 – 9, Oct. = A, Nov. = B, Dec. = C
Month (1 – C)
File No.
(0001 – 9999)
Day (01 – 31)
PIXEL MAPPING ..............................Adjusting the image processing function
The pixel mapping feature allows the camera to check and adjust the CCD and
image processing functions. It is not necessary to operate this function
frequently. Approximately once a year is recommended. Wait at least one minute
after taking or viewing pictures to allow the pixel mapping function to perform
properly. If you turn the camera off during pixel mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press o.
36
Page 37
s ......................................................................Adjusting the monitor brightness
x
ijııķġįġıIJġįġıIJ
ııġĻġıı
ijııķġįġıIJġįġıIJ
ııġĻġıı
s
BACK
MENU
SET
ŜŊŏŞ
OK
Press o after setting is complete.
1: Brightens the monitor. 2: Darkens the monitor.
X ....................................................................................Setting the date and time
The date and time is saved with each image, and is used in the file name.
X
MOVE
x
ijııķġįġıIJġįġıIJ
Y ȁ Mȁ D
ııġĻġıı
SET
ŜŊŏŞ
OK
12
: Select the date format (Y-M-D, M-D-Y, D-M-Y).
43 :Moves to the previous or next setting.
12:Sets the date and time.
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• For a more accurate setting, press o when the time signal hits 00 seconds.
DUALTIME .................................Setting the date and time in another time zone
OFF Switches to the date and time set in [X].
ON Switches to the date and time set in [DUALTIME]. When setting the
dual time, select [ON], and then set the time.
2
Menu operations
DUALTIME ŜŊŏŞ
ijııķġįġıIJġįġıIJ
43
: Moves to the previous or next setting.
12 : Sets the date and time.
MOVE
ııġĻġıı
SET
OK
• The date format is the same as that set with [X].
• The first two digits of the year are fixed.
• The time is displayed in the 24-hour format.
• For a more accurate setting, press o when the time signal hits 00 seconds.
37
Page 38
ALARM CLOCK .............................................................................Setting alarms
ı ĺ Ļ ı ı
OFF No alarm is set or alarm is canceled.
ONE TIME Alarm is activated once.
DAILY Alarm is activated daily at the set time.
• When [X] has not been set, [ALARM CLOCK] is not available.
• When [DUALTIME] is set to [ON], the alarm sounds according to the dual time
date and time setting.
Setting an alarm
2
ALARM CLOCK
TIME
SNOOZE
ALARM SOUND
ıĺĻıı
• Select [ONE TIME] or [DAILY], and set the alarm time.
ŜŊŏŞ
• You can set snooze or alarm sounds and volume.
MOVE
Menu operations
TIME Sets the alarm time.
SET
OK
SNOOZE OFF No snooze is set.
ON Alarm is activated every 5 minutes,
up to 7 times.
ALARM SOUND 1 LOW / MID / HIGH
2 LOW / MID / HIGH
3 LOW / MID / HIGH
Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off
the camera. Note that pressing the o button will turn the camera on.
When [SNOOZE] is set to [ON] at this time, the setting will be canceled. When
[SNOOZE] is [OFF], the alarm stops automatically and the camera turns off
after 1 minute of no operation.
• Checking the alarm settings:
While the camera is off, press the O button to display the set alarm time and
the current time for 3 seconds.
38
Page 39
VIDEO OUT........................................................... Playing back pictures on a TV
NTSC / PAL
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV’s
video signal type.
• TV video signal types by country/region Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Multi-connector
AV cable (provided)
Settings on the camera
Set the mode dial to q, and press
the o button to turn the camera
on.
• The last picture taken is displayed
on the TV. Use the arrow pad
(1243) to select the picture you
want to display.
Connector cover
Connect to the TV’s video
input (yellow) and audio
input (white) terminals.
Settings on the TV
Turn the TV on, and set it to video
input mode.
• For details of switching to video
input, refer to your TV’s instruction
manual.
2
Menu operations
u..........................................................................................Display the histogram
OFF / ON
Set the display or nondisplay of the histogram when O button is pressed in
shooting mode.
FRAME ASSIST .................................Display the frame assist/Decide the type
OFF / w /x
Set the display or nondisplay and the type of frame assist to be displayed when
O button is pressed in shooting mode.
39
Page 40
3 Printing pictures
Printing pictures
3
You can print out the pictures you have taken.
If you print the pictures at home, you can either connect the camera directly to
the printer or you can connect the camera to a computer and download the
pictures to the computer first.
If you go to a photo store, it is a good idea to store the print reservation data on
the card first. With print reservation, you can print out pictures easily either at
home using a personal DPOF-compatible printer or at a photo store that supports
DPOF. DPOF is a standard format used to record automatic print information
from digital cameras. It allows you to store data such as which pictures you want
to print and the number of prints so that you can print pictures automatically at
home or at a photo store.
3
This chapter explains direct printing and print reservations.
Printing pictures
40
Page 41
Direct printing (PictBridge)
Using the direct printing function
By connecting the camera to a PictBridge-compatible printer, you can print out
pictures directly. Select the pictures you want to print and the number of prints
on the camera’s monitor.
To find out if your printer is compatible with PictBridge, refer to the printer’s
instruction manual.
What is PictBridge?
A standard for connecting digital cameras and printers of different makers and printing out
pictures directly.
• Available printing modes, paper sizes etc., vary depending on the printer you
use. Refer to the instruction manual for your printer.
• For details of printing paper types, ink cassettes, etc., refer to the printer’s
instruction manual.
EASY PRINT
[EASY PRINT] can be used to print out the picture displayed on the monitor.
The selected picture is printed using the standard settings of your printer. The
date and file name are not printed.
STANDARD
All printers that support PictBridge have standard print settings. If [STANDARD] is selected
on the settings screens (P.43 to 44), pictures are printed according to these settings. Refer
to the printer’s instruction manual for its standard settings or contact the printer
manufacturer.
1 In playback mode, display the picture you want to print out on
the LCD monitor.
2 Turn the printer on and plug the USB cable provided with the
camera into the multi-connector of the camera and the printer’s
USB port.
Multi-connector
USB cable
3
Printing pictures
• The [EASY PRINT START] screen is displayed.
• For details of how to turn the printer on and the position of the USB port,
refer to the printer’s instruction manual.
41
Page 42
3 Press h/< button.
• Printing starts.
EASY PRINT START
PC / CUSTOM PRINT
• When printing is finished, the picture
selection screen is displayed. To print
another picture, press 43 to select a
picture, and press h/< button.
• When you are finished, disconnect the
3
USB cable from the camera with the
picture selection screen displayed.
4 Remove the USB cable from the
camera.
Printing pictures
5 Remove the USB cable from the
printer.
You can use [EASY PRINT] even when the camera is turned off or in shooting
mode. With the camera turned off or in shooting mode, connect the USB cable.
The selection screen for the USB connection is displayed. Select [EASY
PRINT].
g “EASY PRINT” Step 3 (P. 42), “CUSTOM PRINT” Step 2 (P. 43)
OK
PRINTEXIT
42
Page 43
Other print modes and print settings (CUSTOM PRINT)
1 Display the screen being indicated
on the right according to the
procedure 1 and 2 in P. 41, and
press o.
2 Select [CUSTOM PRINT], and
press o.
Operation guide
3 Make the print settings according
to the operation guide.
Selecting the picture to print
ALL IMAGES Allows you to select from all pictures in the
ALL IMAGES
SEL. ALBUM
ALBUM Select an album and the pictures in the
OK
SET
Selecting a print mode
PRINT MODE SELECT ŜŊŏŞ
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
MENU
EXIT SET
PRINT Prints the selected picture.
ALL PRINT Prints all the pictures stored in the
MULTI PRINT Prints one picture in multiple layout
OK
ALL INDEX Prints an index of all the pictures stored
PRINT ORDER Prints the pictures according to the print
card to print.
album to print. (available only when a card
is inserted)
internal memory or the card.
format.
in the internal memory or the card.
reservation data on the card. If no print
reservations have been made, this
option is not available.
g“Print settings (DPOF)” (P. 46)
EASY PRINT START
PC / CUSTOM PRINT
USB ŜŊŏŞ
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
OK
OK
3
Printing pictures
43
Page 44
Setting the print paper
SI ZE
BORD ERLES S
IJı ı Į ıı ı ĵ
IN
PRINTPAPER
SIZE
SIZE
STANDARD
MENU
BACK
BORDERLESS
BORDERLESS
STANDARD
SET
SIZE Choose from the available paper sizes on
ŜŊŏŞ
your printer.
BORDERLESS Select framed or unframed. In [MULTI
PRINT] mode, you cannot select the
OK
OFF ( ) The picture is printed inside a blank frame.
frame.
ON ( ) The picture is printed filling the entire
page.
PICS/SHEET Available in [MULTI PRINT] mode only.
The number of prints that can be printed
3
vary depending on the printer.
Note
• If the [PRINTPAPER] screen is not displayed, [SIZE], [BORDERLESS] and
[PICS/SHEET] are set to [STANDARD].
Selecting the picture to print
Printing pictures
[
]
IN
PRINT Prints one copy of the selected picture.
When [SINGLE PRINT] or [MORE] has
been selected, a single copy or more
copies are printed.
displayed picture.
SINGLEPRINT
IJııĮıııĵ
PRINT
MORE
OK
SINGLE PRINT Makes a print reservation for the
MORE Sets the number of prints and data to be
printed for the displayed picture.
Press 43 to select the picture you want to print. You can also use the zoom
button and select a picture from the index display.
Setting the number of prints and data to be printed
<× Sets the number of prints. You can
1
WITHOUT
WITHOUT
SET
ŜŊŏŞ
select up to 10 prints.
DATE ( ) If you select [WITH], pictures are printed
with the date.
FILE NAME ( ) If you select [WITH], pictures are printed
OK
with the file name.
P Press the arrow pad (1243) or
zoom button, adjust the position and
size of the trimming box and press o.
Then the trimmed picture will be printed
out.
44
PRINT INFO
<
x
DATE
FILE NAME
P
MENU
BACK
Page 45
4 Select [OK], and press o.
• Printing starts.
• When printing is finished, the [PRINT MODE
SELECT] screen is displayed.
To cancel printing
PRINT ŜŊŏŞ
OK
CANCEL
BACK
MENU
SET
OK
PRINT
TRANSFERRING
CANCEL
OK
Press o
CONTINUE
CANCEL
Screen during data transfer
5 In the [PRINT MODE SELECT] screen, press
m button.
• A message is displayed.
6 Disconnect the USB cable from the
camera.
• The camera turns off.
7 Disconnect the USB cable from the
printer.
ŜŊŏŞ
Select
[CANCEL],
OK
SET
and press o.
PRINT MODE SELECT ŜŊŏŞ
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
MENU
EXIT SET
3
Printing pictures
OK
45
Page 46
Print settings (DPOF)
How to make print reservations
Print reservation allows you to save printing data (the number of prints and the
date and time information) with the pictures stored on the card.
Only the images stored on the card can be reserved to print. Insert a card with
recorded pictures into the camera before making print reservations.
Pictures with print reservations can be printed using the following procedures.
Printing using a DPOF-compatible photo store.
3
You can print the pictures using the print reservation data.
Printing using a DPOF-compatible printer.
Printing is possible directly from a card containing print reservation data,
without using a computer. For more details, refer to the printer’s instruction
manual. A PC card adapter may also be necessary.
Note
Printing pictures
• DPOF reservations set by another device cannot be changed by this camera.
Make changes using the original device. If a card contains DPOF reservations
set by another device, entering reservations using this camera may overwrite
the previous reservations.
• Not all functions may be available on all printers, or at all photo stores.
To use print services without using DPOF
• Pictures stored in the internal memory cannot be printed at a photo store. The
pictures need to be copied to a card before taking them.
g“BACKUP Copying pictures in the internal memory to the card” (P. 34)
46
Page 47
Single-frame reservation
IJijĻ Ĵı
Ĩı ķį ıĴ įij ķ
IJı ı Į ıı ı ĵ
ʼnŒ
xD
1 ( 1)1)
Follow the operation guide to make a print reservation for a selected picture.
1 Press the m button in the playback mode and display the
top menu.
2 Select [PRINT ORDER] [<], and press
o.
• Playing back the album: Top menu [PRINT
ORDER] [<]
Operation guide
< PRINT ORDER
<
U
MENU
BACK
SET
ŜŹŅŞ
OK
3 Press 43 to select the frames for print
[
]
xD
reservations, and then press 12 to set
the number of prints.
To trim the picture
• Press the zoom button to display the trimming box.
• Press the arrow pad (1243) or zoom button,
adjust the position and size of the trimming box and
press o.
• You cannot make print reservations for pictures with A.
• Repeat Step 3 to make print reservations for other pictures.
ŘOŕ
4 When you finish making print reservations, press o.
5 Select the date and time print setting, and
press o.
NO The pictures are printed without the date and
time.
DATE The selected pictures are printed with the
shooting date.
TIME The selected pictures are printed with the
shooting time.
6 Select [SET], and press o.
X
NO
DATE
TIME
MENU
BACK
< PRINT ORDER
1 (
SET
CANCEL
MENU
BACK
ȿ
ĨıķįıĴįijķ
ı
IJijĻĴı
IJııĮıııĵ
SET
ŜŹŅŞ
SET
ŜŹŅŞ
SET
3
ʼnŒ
Printing pictures
ĵ
OK
OK
OK
47
Page 48
All-frame reservation
PRINT ORDERED
Reserves all the pictures stored on the card. The number of prints is set at one
print per picture.
1 Press the m button in the playback mode and display the
top menu.
2 Select [PRINT ORDER] [U], and press o.
• Playing back the album:Top menu [PRINT ORDER] [U]
3 Select the date and time setting, and press o.
NO The pictures are printed without the date and time.
DATE All pictures are printed with the shooting date.
3
TIME All pictures are printed with the shooting time.
4 Select [SET], and press o.
Resetting print reservation data
You can reset all the print reservation data or just for selected pictures.
1 Select top menu [PRINT ORDER], and press o.
Printing pictures
• Playing back the album:Top menu [PRINT ORDER]
To reset the print reservation data for all the pictures
2 Select [<] or [U], and press o.
3 Select [RESET], and press o.
PRINT ORDER SETTING
PRINT ORDERED
RESET
KEEP
MENU
BACK
SET
ŜŹŅŞ
OK
To reset the print reservation data for a selected picture
2 Select [<], and press o.
3 Select [KEEP], and press o.
4 Press 43 to select the picture with the print reservations you
want to cancel, and press 2 to decrease the number of prints
to 0.
• Repeat Step 4 to cancel print reservations for other pictures.
5 When you are finished canceling print reservations, press o.
6 Select the date and time setting, and press o.
48
• The setting is applied to the remaining pictures with print reservations.
7 Select [SET], and press o.
Page 49
4 Connecting the camera t o a computer
Connecting the camera to a computer
4
Flow
Using the USB cable provided with your camera, you can connect the camera
and computer and download (transfer) the images to your computer using the
OLYMPUS Master software, also provided with the camera.
Prepare the following items
before starting.
Install the OLYMPUS Master software gP. 50
OLYMPUS
Master
CD-ROM
USB cable
Connect the camera to the computer
using the USB cable
Start up the OLYMPUS Master software
gP. 53
gP. 54
Download image files to the computer gP. 55
gP. 55
Computer equipped with a USB port
Disconnect the camera from the
computer
Using OLYMPUS Master
What is OLYMPUS Master?
OLYMPUS Master is application software for editing images taken with a digital
camera on a computer. Installing it on your computer lets you do the following:
Download images from the camera
or other media
View images and movies
You can run a slideshow and play back
sound.
Manage images
You can organize your images using the
calendar display. Search the image you
want by date or keyword.
Edit images
You can rotate images, trim them and
change the size.
Edit images with the filter and
correction functions
Print images
You can print images and make
indexes, calendars and postcards.
Make panoramic images
You can make panoramic images using
pictures taken in panorama mode.
For details of other functions and
operations, refer to the “Help” guide and
OLYMPUS Master reference manual.
4
Connecting the camera to a computer
49
Page 50
Install the OLYMPUS Master software
Before installing the OLYMPUS Master software, please confirm that your
computer is compatible with the following system requirements.
For newer operating systems, please refer to the Olympus web site as shown on the
back cover of this manual.
Operating environment
Windows
OS Windows 98SE/Me/2000 Professional/XP
CPU Pentium III 500 MHz or later
RAM 128 MB or more (at least 256 MB is recommended)
Hard disk capacity 300 MB or more
Connector USB port
Monitor 1,024 × 768 pixels, 65,536 colors or more
4
Note
• Data transfer is only guaranteed on computers with a factory installed OS.
• To install the software in Windows 2000 Professional/XP, you must log on as a
user with administrators’ privileges.
• Internet Explorer and QuickTime 6 or later should be installed on your computer.
• Windows XP corresponds to Windows XP Professional/Home Edition.
• Windows 2000 corresponds to Windows 2000 Professional.
• If you are using Windows 98SE, the USB driver is installed automatically.
Macintosh
OS Mac OS X 10.2 or later
CPU Power PC G3 500 MHz or later
RAM 128 MB or more (at least 256 MB is recommended)
Hard disk capacity 300 MB or more
Connector USB port
Connecting the camera to a computer
Monitor 1,024 × 768 pixels, 32,000 colors or more
50
Note
• Operation is only guaranteed on a Macintosh equipped with a built-in USB port.
• QuickTime 6 or later and Safari 1.0 or later must be installed.
• Be sure to remove the media (drag & drop onto the trash icon) before performing
the following operations. Failure to do so could result in unstable computer
operation and the need to reboot.
• Disconnect the cable connecting the camera to the computer
• Turn off the camera
• Open the camera’s battery compartment/card cover
Page 51
Windows
1 Insert the CD-ROM into the CD-ROM
drive.
• The OLYMPUS Master setup screen is
displayed.
• If the screen is not displayed, double-click
the “My Computer” icon and click the CDROM icon.
2 Click “OLYMPUS Master”.
• The QuickTime installation screen is
displayed.
• QuickTime is required to use OLYMPUS
Master. If the QuickTime screen is not
displayed, QuickTime 6 or later is already
installed on the computer. In this case, go to
step 4.
3 Click “Next” and follow the on-screen
instructions.
• When the QuickTime licensing agreement is
displayed, read the agreement and click
“Agree” to proceed with the installation.
• The OLYMPUS Master installation screen is
displayed.
4 Follow the on-screen instructions.
• When the OLYMPUS Master licensing
agreement is displayed, read the agreement
and click “Yes” to proceed with the
installation.
4
Connecting the camera to a computer
• When the “User Information” dialog box is
displayed, enter your “Name” and
“OLYMPUS Master Serial Number”; select
your region and click “Next”.
Refer to the sticker on the CD-ROM package
for the serial number.
• When the DirectX licensing agreement is
displayed, read the agreement and click “Yes”.
51
Page 52
• A screen asking whether or not you want to install Adobe Reader is
displayed. Adobe Reader is required to read the OLYMPUS Master
instruction manual. If this screen is not displayed, Adobe Reader is already
installed on your computer. To install Adobe Reader, click “OK”.
5 Follow the on-screen instructions.
• The screen confirming that installation is
completed is displayed. Click “Finish”.
6 Select the option to restart
immediately when the screen asking
you if you wish to restart the computer
is displayed and click “OK”.
• The computer restarts.
• Remove the CD-ROM from the CD-ROM drive and store it.
4
Macintosh
1 Insert the CD-ROM into the CD-ROM drive.
• The CD-ROM window is displayed.
• If the CD-ROM window is not displayed, double-click
the CD-ROM icon on the desktop.
2 Double-click on the desired language folder.
3 Double-click the “Installer” icon.
• The OLYMPUS Master installer starts up.
• Follow the on-screen instructions.
• When the OLYMPUS Master licensing agreement is
displayed, read the agreement and click “Continue”
Connecting the camera to a computer
and then “Agree” to proceed with the installation.
• The screen confirming that installation is completed is displayed.
4 Click “Finish”.
• The first screen is displayed.
5 Click “Restart”.
• The computer restarts.
• Remove the CD-ROM from the CD-ROM drive and store it.
52
Page 53
Connecting the camera to a computer
1 Make sure the camera is turned off.
• The monitor is off.
• The lens is retracted.
Monitor
2 Connect the multi-connector on the camera to
the USB port on the computer using the
provided USB cable.
•
Refer to your computer’s instruction manual to
locate the position of the USB port.
• The camera turns on automatically.
• The monitor turns on and the selection screen for
the USB connection is displayed.
3 Select [PC], and press o.
4 The camera is recognized by the computer.
• Windows
When you connect the camera to your computer for
the first time, the computer attempts to recognize
the camera. Click “OK” to exit the message that is
displayed. The camera is recognized as a “Removable Disk”.
•
Macintosh
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto
application starts automatically, so close this application and start
OLYMPUS Master.
Connector cover
Multi-connector
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
4
Connecting the camera to a computer
ŜŊŏŞ
OK
Note
• The camera functions are disabled while the camera is connected to a
computer.
• Connecting the camera to a computer via a USB hub may cause unstable
operation. In this case, do not use a hub, but connect the camera directly to the
computer.
53
Page 54
Start up the OLYMPUS Master software
Windows
1 Double-click the “OLYMPUS Master” icon on the desktop.
• The main menu is displayed.
• When OLYMPUS Master is started up for the first time after installation, the
“Registration” dialog box is displayed before the main menu. Follow the
prompts and fill in the registration form.
Macintosh
1 Double-click the “OLYMPUS Master” icon in the “OLYMPUS
Master” folder.
• The main menu is displayed.
4
• When OLYMPUS Master is started up for the
first time, the “User Information” dialog box is
displayed before the main menu. Enter your
“Name” and “OLYMPUS Master Serial
Number”, and select your region.
• After the “User Information” dialog box, the
“Registration” dialog box is displayed. Follow
the prompts and fill in the registration form.
OLYMPUS Master main menu
1
2
3
Connecting the camera to a computer
1“Transfer Images” button
Downloads images from the camera or
other media.
2“Browse Images” button
The “Browse” window is displayed.
3“Online Print” button
The online print window is displayed.
4
To exit OLYMPUS Master
1 Click “Exit” on the main menu.
54
• OLYMPUS Master is exited.
7
6
5
4“Print Images at Home” button
The print menu is displayed.
5“Create and Share” button
Displays the editing menu.
6“Backup Images” button
Creates backup images.
7“Upgrade” button
Displays window for optional upgrade to
OLYMPUS Master Plus.
Page 55
Displaying camera images on a computer
Downloading and saving images
1 Click “Transfer Images” on the OLYMPUS Master main
menu.
• The menu for selecting the source is displayed.
2 Click “From Camera” .
• The window for selecting images is
displayed. All the images in the camera are
displayed.
3 Select the image files and click
“Transfer Images”.
• A window indicating that the download is
complete is displayed.
4 Click “Browse images now.”
• The downloaded images are displayed in the
browse window.
• To return to the main menu, click “Menu” in
the “Browse” window.
To disconnect the camera
1 Make sure that the card access lamp has
stopped blinking.
4
Connecting the camera to a computer
Card access lamp
55
Page 56
2 Make the following preparations for disconnecting the USB
cable.
Windows 98SE
1 Double-click the “My Computer” icon and right-click
the “Removable Disk” icon to display the menu.
2 Click “Eject” on the menu.
Windows Me/2000/XP
1 Click the “Unplug or Eject Hardware” icon in
4
the system tray.
2 Click the message that is displayed.
3 When a message is displayed saying that the
hardware can be ejected safely, click “OK”.
Macintosh
1 The trash icon changes to the eject icon when
the “Untitled” or “NO_NAME” icon on the
desktop is dragged. Drag and drop it on the eject
icon.
3 Disconnect the USB cable from the
camera.
56
Connecting the camera to a computer
Note
• Windows Me/2000/XP: When you click “Unplug or Eject Hardware”, a warning
message may be displayed. Make sure that image data is not being downloaded
from the camera and that all applications are closed. Click the “Unplug or Eject
Hardware” icon again and disconnect the cable.
Page 57
Viewing still pictures and movies
1 Click “Browse Images” on the OLYMPUS Master main
menu.
• The “Browse” window is displayed.
2 Double-click the still picture
thumbnail that you want to view.
Thumbnail
• The camera switches to view mode and
the picture is enlarged.
• To return to the main menu, click “Menu”
in the “Browse” window.
To view a movie
1 Double-click the movie thumbnail that you want to see in the
“Browse” window.
• The camera switches to view mode and the first frame of the movie is
displayed.
2 To play back the movie, click the playback button at the bottom
of the screen.
The names and functions of the controller parts are shown below.
4
Connecting the camera to a computer
1 2 3 4 5 6 7 8
Item Description
1 Playback slider Move the slider to select a frame.
2 Time display Displays the time that has elapsed during playback.
3 Playback (pause) button Plays the movie. Functions as the pause button during
4 Back button Displays the previous frame.
5 Forward button Displays the next frame.
6 Stop button Stops playback and returns to the first frame.
7 Repeat button Plays the movie repeatedly.
8 Volume button Displays the volume adjustment slider.
playback.
57
Page 58
Printing pictures
Pictures can be printed from the photo, index, postcard and calendar menus. The
explanation below uses the photo menu.
1 Click “Print Images at Home” on the OLYMPUS Master main
menu.
• The print menu is displayed.
2 Click “Photo” .
• The “Photo Print” window is displayed.
3 Click “Settings” in the “Photo Print”
4
window.
• The printer settings screen is displayed.
Make the necessary printer settings.
4 Select a layout and size.
• To print the date and time with your image,
check the box next to “Print Date”, and select
between “Date” and “Date & Time”.
5 Select the thumbnail image that you
Connecting the camera to a computer
want to print and click “Add”.
• A preview of the selected image is displayed
on the layout.
6 Select the number of copies.
58
Page 59
7 Click “Print”.
• Printing starts.
• To return to the main menu, click “Menu” in the “Photo Print” window.
To download and save images to a computer without using OLYMPUS Master
This camera is compatible with USB mass storage. You can connect the camera
to your computer using the USB cable provided with the camera to download and
save images without using OLYMPUS Master. The following environment is
required to use the USB cable to connect the camera to your computer.
Windows: Windows 98SE/Me/2000 Professional/XP
Macintosh: Mac OS 9.0 to 9.2/X
Note
• If your computer is running Windows 98SE, you will need to install the USB
driver. Before connecting the camera to your computer with the USB cable,
double-click the files from the following folders on the provided OLYMPUS
Master CD-ROM.
(Drive name): \USB\INSTALL.EXE
• Data transfer is not guaranteed in the following environments, even if your
computer is equipped with a USB port.
• Windows 95/98/NT 4.0
• Windows 98SE upgrades from Windows 95/98
• Mac OS 8.6 or earlier
• Computers with a USB port added by means of an extension card, etc.
• Computers without a factory-installed OS and home-built computers
4
Connecting the camera to a computer
59
Page 60
5 Getting to k now your camera better
Getting to know your camera better
5
Shooting tips and information
Tips before you start taking pictures
The camera does not turn on even when a battery is loaded
The battery is not fully charged
• Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
• Battery performance declines in low temperatures, and the charge may not be
sufficient to turn on the camera. Remove the battery and warm it by putting it
in your pocket for a while.
No picture is taken when the shutter button is pressed
The camera is in sleep mode
5
Getting to know your camera better
• To save battery power, the camera automatically goes into sleep mode and
the monitor turns off if there is no operation when the camera is turned on
(when the lens is extended and the monitor is on). No picture is taken even if
the shutter button is fully pressed in this mode. Operate the zoom button or
other buttons to restore the camera from sleep mode before taking a picture.
If the camera is left for 15 minutes, it automatically turns off (the lens retracts
and the monitor turns off). Press the o button to turn the camera on.
The mode dial is set to q
• This is the playback mode for displaying pictures on the monitor. Set the mode
dial to a shooting mode.
The mode dial is in the position of g
• No pictures can be taken when the shooting guide is being displayed. Turn the
mode dial and set it to the position other than
g in the shooting mode.
The flash is charging
• Wait until the # (flash charge) mark stops blinking before taking the picture.
The memory gauge is full
• No pictures can be taken when the memory gauge is full. Wait until there is
space in the memory gauge.
60
Shoot Shoot Shoot
a b c d
Before taking
any pictures
(Off)
After taking
one picture
(Lit)
After taking
several pictures
(Lit)
Wait
Maximum
reached
(All lit)
Page 61
The date and time have not been set
The camera has been used in the same conditions from the time of
purchase
• No date and time have been set for the camera at the time of purchase. Set
the date and time before using the camera.
g “X Setting the date and time” (P. 37)
The battery has been pulled out of the camera.
• The date and time settings will be returned to the factory default settings if the
camera is left without batteries for approximately 1 day. Before taking
important pictures, check that the date and time settings are correct.
Shooting tips
Focusing on the subject
There are several ways to focus, depending on the subject.
When the subject is not in the center of the frame
• Place the subject in the center of the frame, lock the focus on the subject, and
then recompose your picture.
• Set [AF MODE] to [iESP].
g “AF MODE Changing the focusing area” (P. 23)
The subject is moving quickly
• Focus the camera on a point roughly the same distance away as the subject
you want to shoot (by pressing the shutter button halfway), and then
recompose your picture and wait for the subject to enter the frame.
5
Getting to know your camera better
61
Page 62
Subjects that are difficult to focus on
• Under certain types of conditions, it is difficult to focus using auto focus. The
green lamp on the monitor lights, allowing you to check if the focus is locked.
The green lamp
blinks.
The subject cannot be
brought into focus.
The green lamp
lights, but the
subject cannot be
brought into focus.
Subject with low
contrast
Subjects at
different distances
Subject with an
extremely bright
area in the center
of the frame
Fast-moving
subject
In these cases, focus (focus lock) on an object with high contrast at the same
distance as the intended subject, recompose your shot and then take the
5
picture. If the subject has no vertical lines, hold the camera vertically and
focus the camera using the focus lock function by pressing the shutter button
halfway, and then return the camera to the horizontal position while keeping
the button pressed halfway and take the picture.
To shoot a stabilized digital image
Hold the camera in a correct posture and press the shutter button slowly. In
addition, pressing the h/< button and taking a picture in the h mode
stabilize the digital image.
The digital images are not stabilized when:
• images are shot using a zooming function of high magnification, i.e., using
both optical zoom and digital zoom functions,
• the object is dark and the shutter speed is slow, or
Getting to know your camera better
• the flash cannot be used or when a low shutter speed set s mode is
selected.
Subject without
vertical lines
The subject is not
in the center of the
frame
62
Page 63
Taking pictures without the flash
The flash fires automatically when there is insufficient light. If the subject is too
far away, the flash may have no effect. Here is how to take pictures without the
flash in this type of situation.
Set the camera to h mode
• Because the sensitivity of the CCD increases automatically, you can hold the
camera and take pictures in darker places with the flash off.
g “Shooting with digital image stabilization mode” (P. 13)
Increase the [ISO] setting
• Increase the value of the [ISO] setting.
g “ISO Changing the ISO sensitivity” (P. 21)
The picture is too grainy
There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures
• With the digital zoom, part of the image is cropped and enlarged. The greater
the magnification, the grainier the picture appears.
g “DIGITAL ZOOM Zooming in on your subject” (P. 22)
Increasing the ISO sensitivity
• When you increase the [ISO] setting, “noise”, which appears as spots of
unwanted color or unevenness in the color, can be introduced and give the
picture a grainy appearance. This camera is equipped with a function to allow
shooting at high sensitivity while suppressing noise; however, increasing the
ISO sensitivity creates grainier pictures than when using a lower sensitivity.
g “ISO Changing the ISO sensitivity” (P. 21)
Taking pictures with the correct color
• The reason why there are differences between the colors in a picture and the
actual colors taken and the actual color is the light source illuminating the
subject. [WB] is the function that allows the camera to determine the correct
colors. Normally, the [AUTO] setting provides the optimal white balance, but
depending on the subject, it may be better to experiment with changing the
[WB] setting.
• When the subject is in the shade on a sunny day
• When the subject is illuminated by both natural light and indoor lighting,
such as when near a window
• When there is no white in the center of the frame
g “WB Adjusting the color of a picture” (P. 21)
5
Getting to know your camera better
63
Page 64
Taking pictures of a white beach or snow scene
• Take pictures with K in s mode. Suitable for taking pictures on a sunny
day at the beach or in the snow.
g “Shooting pictures by selecting a scene according to the situation” (P. 20)
• Often, bright subjects (such as snow) turn out darker than their natural colors.
Adjust [F] toward [+] to make these subjects closer to their real shades.
Conversely, when you are shooting dark subjects, it can be effective to adjust
toward the [–]. Sometimes, using the flash may not produce the brightness
(exposure) that was intended.
g “1F button Changing picture brightness” (P. 13)
Taking pictures of a subject against backlight
• With [ESP/n] set to [n], the picture can be taken based on the brightness
at the center of the monitor without being affected by the light in the
background.
g “ESP/n Changing the area for measuring the brightness of a subject” (P. 22)
• Set the flash to [#] to activate fill-in-flash. You can shoot a subject against
5
backlight without the face of the subject appearing dark. [#] is effective for
shooting against backlight and under fluorescent and other artificial lightening.
g “3# button Flash shooting” (P. 12)
Additional shooting tips and information
Increasing the number of pictures that can be taken
There are two ways to record the pictures you take with this camera.
Recording pictures to the internal memory
• Pictures are recorded to the internal memory, and when the number of
storable still pictures reaches 0, you must connect the camera to a computer
to download the pictures, and then erase the pictures from the internal
memory.
Using a card (optional)
Getting to know your camera better
• Pictures are recorded to the card when inserted in the camera. When the card
is full, you download the pictures to a computer, and then either erase the
pictures from the card or use a new card.
• Pictures are not recorded to the internal memory when a card is inserted in
the camera. Pictures in the internal memory can be copied to the card using
the [BACKUP] function.
g “BACKUP Copying pictures in the internal memory to the card” (P. 34)
“The card” (P. 79)
64
Page 65
Number of storable still pictures and recording length of movies
Still pictures
Number of storable still pictures
Image
quality
SHQ 3264
HQ 3264
SQ1
SQ2
Image size
2560
2304
2048
1600
1280
1024
× 2448 7 7 31 32
× 2448 14 14 62 63
× 1920 23 23 102 105
× 1728 28 29 124 128
× 1536 35 37 156 162
× 1200 43 45 190 199
× 960 64 69 285 307
× 768 95 107 420 469
640
× 480 139 165 614 725
Internal memory
With sound
Without
sound
Using a 128 MB card
With sound
Movie
Image
quality
SHQ
HQ
SQ
Image size
640
× 480
(30 frames/sec.)
× 240
320
(30 frames/sec.)
× 120
160
(15 frames/sec.)
Internal memory
5 min. 41 sec. 25 min. 1 sec.
Recording length
Using a 128 MB card
16 sec. 1 min. 10 sec.
43 sec. 3 min. 10 sec.
• When the [IMAGE QUALITY] is set to [SHQ], the continuously recording
length of the card other than the TypeH is up to approx. 15 seconds.
Without
sound
5
Getting to know your camera better
Using a new card
• If you use a non-Olympus card or a card used for another application, such as
for a computer, the message [CARD ERROR] is displayed. To use this card
with this camera, use the [FORMAT] function to format the card.
g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card”
(P. 34)
65
Page 66
Lamp indicators
This camera uses several lamps to indicate the camera status.
Lamp Status
Self-timer lamp The lamp lights for approximately 10 seconds, blinks for
Card access lamp Blinking: A picture is being recorded, the camera is reading
Green lamp of the LCD
monitor
5
approximately 2 seconds, and then the picture is taken.
a movie, or images are being downloaded (when
connected to a computer).
• Do not do any of the following while the card access lamp
is blinking. Doing so may prevent the image data from
being saved and render the internal memory or card
unusable.
• Open the battery compartment/card cover
• Remove the battery.
• Connect or disconnect the AC adapter.
Lit: The focus and exposure are locked.
Blinking: The focus and exposure are not locked.
• Release your finger from the shutter button, re-position
the AF target mark on the subject and press the shutter
button halfway again.
Extending the useful life of the battery
• Performing any of the following operations when not actually taking pictures
can deplete the battery power.
• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom
• To save battery power, turn off the camera whenever it is not in use.
Functions that cannot be selected from menus
• Some items may not be selectable from the menus when using the arrow pad
(1243).
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
Getting to know your camera better
[%], Flash Mode, etc.
• Items that cannot be set because the pictures taken by other camera will
be edited.
• Some functions cannot be used when there is no card in the camera.
[PANORAMA], [PRINT ORDER], [ALBUM ENTRY], [Q], [P], [REDEYE
FIX], [BLACK & WHITE], [SEPIA], [FRAME], [TITLE], [CALENDAR],
[LAYOUT], [BRIGHTNESS], [SATURATION], [INDEX], [EDIT], [UNDO
ENTRY], [SELECT JACKET], [FORMAT], [BACKUP]
66
Page 67
Selecting the optimal record mode
A record mode expresses a combination of desired image size and compression
level. Use the following examples to help determine the optimal record mode
when shooting.
To print large images on full-size paper/To edit and process images on a
computer
• [SHQ] or [HQ]
To print postcard-size images
•[SQ1]
To send as an e-mail attachment or post on a web site
•[SQ2]
g “IMAGE QUALITY Changing the image quality” (P. 19)
To return the settings of functions to default settings
• If the settings such as [IMAGE QUALITY] or flash settings (excluding h and
s) are changed according to the shooting, the changed settings can be
maintained even after the power is turned off. To return the settings to default
settings, execute [RESET].
g “RESET Change the shooting functions back to default settings” (P. 20)
Confirming the exposure when the monitor is difficult to see outdoors
The monitor may be difficult to see and the exposure difficult to confirm when
shooting outdoors.
Press the O button repeatedly to display the histogram
• Set the exposure so that the graph is concentrated on the outer edges and the
graph is balanced on both sides.
How to read the histogram
1
If the peak fills too much of the frame, the image will
appear mostly black.
2
If the peak fills too much of the frame, the image will
appear mostly white.
3
The part indicated in green in the histogram shows the
luminance distribution within the AF target mark.
g “O button Changing the information displays /Display the menu guide” (P. 14)
1
2
3
5
Getting to know your camera better
67
Page 68
Playback help and troubleshooting tips
To stabilize the blurred picture
If the played back picture is blurred, press the h/P button and the o button
in this order to stabilize the picture.
Icon
No icon: The image cannot be stabilized.
: The image has already been stabilized or has no blur.
: The image can be stabilized. (In some images,
the proper stabilization effect may not be
acquired.)
* It may take long time to display the Icon.
The blurred image cannot be stabilized
Some images cannot be stabilized or cannot acquire the proper stabilization
effect even if the h/P button is pressed.
5
The shutter speed is low / the digital image is severely shaken: The recorded
picture may not be stabilized or cannot acquire the proper stabilization effect.
Moving object: The image cannot acquire the proper stabilization effect.
In addition, the digital image stabilization mode cannot be activated when:
• the USB cable is connected to the camera,
• the internal memory capacity or the card capacity is insufficient, or
• the image edited by the movie or the PC, or the image shot by the camera
other than this camera is selected.
The red-eye cannot be fixed
• Depending on the picture, the red-eye may not be fixed. Also, parts except the
eye may be fixed.
Getting to know your camera better
The picture cannot be registered in the album
• Up to 100 pictures can be registered in each album.
• The same picture cannot be registered in several albums.
68
Page 69
Playback tips
Playing back the picture in the internal memory
• When a card has been inserted in the camera, the picture in the internal
memory cannot be played back. Pull out the card before operating the
camera.
Understanding the settings and other information of pictures taken
• Play back a picture, and press the O button. Press the O button repeatedly
to change the amount of information displayed.
g “O button Changing the information displays /Display the menu guide”
(P. 14)
Quickly displaying a desired picture
• Use the album function. You can create up to 12 albums and enter the pictures
on a card to the albums. To view the pictures, set the mode dial to
then select an album from the top menu to play back.
The same picture cannot be entered in multiple albums.
g “ALBUM ENTRY Adding pictures to an album” (P. 30)
“ALBUM See the pictures registered in the album” (P. 31)
• Press W on the zoom button to view the pictures as thumbnails (index display)
or in a calendar format (calendar display).
g “Zoom button Zooming while shooting/close-up playback” (P. 11)
q
, and
Erasing sound recorded to still pictures
• Once sound is added to a picture, it is not possible to erase the sound. In this
case, make a re-recording with silence. Sound recording is not possible if
there is insufficient space in the internal memory or on the card.
g “R Adding sound to still pictures” (P. 29)
5
Getting to know your camera better
69
Page 70
Viewing pictures on a computer
Viewing the entire picture on a computer screen
The size of the picture displayed on a computer screen changes depending on
the computer settings. When the monitor setting is 1,024
Internet Explorer to view a picture with an image size of 2,048
the entire picture cannot be viewed without scrolling. There are several ways you
can view the entire picture on the computer screen.
View the picture using image browsing software
• Install the OLYMPUS Master software from the provided CD-ROM.
Change the monitor setting
• The icons on the computer desktop may be rearranged. For details of
changing the settings on your computer, refer to the computer’s instruction
manual.
× 768 and you are using
× 1,536 at 100%,
5
70
Getting to know your camera better
Page 71
When you get an error message on the camera...
Monitor indication Possible cause Corrective action
q
CARD ERROR
q
WRITE-
PROTECT
>
MEMORY FULL
q
CARD FULL
L
NO PICTURE
r
PICTURE
ERROR
CARD-COVER
OPEN
g
BATTERY
EMPTY
Y/M/D
There is a problem with
the card.
Writing to the card is
prohibited.
The internal memory
has no available
memory and cannot
store any new data.
The card has no
available memory and
cannot store any new
data.
There are no pictures in
the internal memory or
on the card.
There is a problem with
the selected picture and
it cannot be played back
on this camera.
The battery
compartment/card cover
is open.
The battery is empty. Charge the battery.
When the camera is
used for the first time or
the battery has been
removed for a long time,
the date and time are on
the factory default
setting.
This card cannot be used. Insert a
new card.
The recorded image has been
protected (read-only) on a computer.
Download the image to a computer
and cancel the read-only setting.
Insert a card or erase unwanted
data. Before erasing, back up the
data of important pictures using the
card, or download such pictures to a
computer.
Replace the card or erase unwanted
data. Before erasing, download
important pictures to a computer.
The internal memory or the card
contains no pictures.
Record pictures.
Use image processing software to
view the picture on a computer. If that
cannot be done, the image file is
damaged.
Close the battery compartment/card
cover.
Set the date and time.
5
Getting to know your camera better
71
Page 72
Monitor indication Possible cause Corrective action
NO CONNECTION
5
CARD SETUP
POWER OFF
FORMAT
SET
MEMORY SETUP
POWER OFF
MEMORY FORMAT
SET
NO PAPER
NO INK
This card cannot be
ŜŹŅŞ
used in this camera. Or,
the card is not formatted.
OK
There is an error in the
ŜŊŏŞ
internal memory.
OK
The camera is not
connected to the printer
correctly.
There is no paper in the
printer.
The printer has run out
of ink.
Format the card or replace.
• Select [POWER OFF] and press o.
Insert a new card.
• Select [FORMAT] [YES] and press
o. All data on the card is erased.
Select [MEMORY
FORMAT] [YES] and press o. All
data in the internal memory is
erased.
Disconnect the camera and connect
it again correctly.
Load some paper in the printer.
Replace the ink cartridge in the
printer.
The paper is jammed. Remove the jammed paper.
JAMMED
SETTINGS
CHANGED
The printer’s paper tray
has been removed or
the printer has been
operated while changing
Do not operate the printer while
changing settings on the camera.
settings on the camera.
Getting to know your camera better
PRINT ERROR
r
CANNOT PRINT
There is a problem with
the printer and/or
camera.
Pictures recorded on
other cameras may not
be printed on this
Turn off the camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
Use a computer to print.
camera.
72
Page 73
Functions available in shooting modes and scenes
Some functions cannot be set in certain shooting modes. For more details, refer
to the table below.
Grayed out areas ( ) in the s column indicate that to enable the shooting
scene in s mode, there are restrictions to the functions that can be set.
g “Functions with restrictions in shooting scenes” (P. 74)
Functions available in shooting modes
Shooting mode K
Function P AUTO
F 9999
Flash 99 —
&/% 99 9
Y 99 9
Optical zoom 99 9
h 99 9
WB 9 — 99
ISO 9 ———
DRIVE 9 ———
ESP/n 9 — 9
IMAGE QUALITY 99
DIGITAL ZOOM 9 —
AF MODE 9 — —
R 9 —
PANORAMA 9 —
MEMORY FORMAT
(FORMAT)
BACKUP 9999
W 9999
PW ON SETUP 99 9
COLOR 9999
BEEP 99 9
8 99 9
SHUTTER SOUND 99 —
REC VIEW 99 —
FILE NAME 9999
PIXEL MAPPING 9999
s 9999
X 9999
DUALTIME 9999
9999
s n
9
9
—
—
5
Getting to know your camera better
73
Page 74
Shooting mode K
Function P AUTO
s n
ALARM CLOCK 9999
VIDEO OUT 9999
u 999—
FRAME ASSIST 999—
Functions with restrictions in shooting scenes
Scene
B
FDG
Function
C
g
V
U
Flash 9999— 9 ——————9
&/% 9
*19*1
9
Y 99999999999——
Optical zoom 99999— 9999999
h 99999999999— 9
5
ESP/n 99999— 9999999
IMAGE
QUALITY
DIGITAL
ZOOM
999
9999——99999— 9
AF MODE 99999— 9 — 99999
R 9999999999———
PANORAMA 99999— 9999———
PW ON
SETUP
99999999— 9999
BEEP 99999999— 9999
8 99999999— 9999
SHUTTER
SOUND
Getting to know your camera better
REC VIEW 9999999999———
99999999— 9999
*1 [%] is not available.
*2 Only the picture quality below [2048 x 1536] is available.
*3 The picture quality is fixed to [640 x 480].
*4 Excluding [!].
W
N
c
99
*2
99
RSXj
*19*1
9
— 99— 99
99999
P
ief
d
*3
9
*4
*2
9
74
Page 75
Glossary of terms
Aperture
The adjustable lens opening which controls the amount of light that enters the camera.
The larger the aperture, the shorter the depth of field and the fuzzier the background. The
smaller the aperture, the greater the depth of field and the sharper the background. Larger
aperture values indicate smaller apertures, and smaller aperture values indicate larger
apertures.
CCD (Charge-Coupled Device)
This converts light passing through the lens into electrical signals. On this camera, light is
picked up and converted into RGB signals to build a single image.
Contrast Detection Method
This is used to measure the distance to the subject. The camera determines if the image
is focused by the level of contrast in the subject.
Conventional Photograph
This refers to recording images using silver halide (the method for recording images in
conventional, non-digital photography). This system is in contrast to still video and digital
photography.
DCF (Design Rule for Camera File System)
A standard for image files by the Japan Electronics and Information Technology
Industries Association (JEITA).
DPOF (Digital Print Order Format)
This is for saving desired print settings on digital cameras. By entering which images to
print and the number of copies of each, the user can easily have the desired images
printed by a printer or print lab that supports the DPOF format.
Eclipsing (Vignetting)
This refers to when an object obscures part of the field of view so that the whole subject
is not photographed. Vignetting also refers to when the image seen through the viewfinder
does not exactly match the image shot through the objective lens, so the photographed
image includes objects not seen through the viewfinder. In addition, vignetting can occur
when an incorrect lens hood is used, causing shadowing to appear in the corners of the
image.
ESP (Electro-Selective Pattern) Light Metering/Digital ESP Light Metering
This determines the exposure by metering and calculating the light levels in the center
and other areas of the image separately.
EV (Exposure Value)
A system for measuring exposure. EV0 is when the aperture is at F1 and the shutter
speed is 1 second. The EV then increases by 1 each time the aperture increases by one
F stop or the shutter speed increases by one increment. EV can also be used to indicate
brightness and ISO.
Exposure
The amount of light used to capture an image. The exposure is determined by the time
the shutter is open (shutter speed) and the amount of light that passes through the lens
(aperture).
Image size
The size of an image expressed by the number of pixels that make up the image. For
instance, a picture taken with an image size of 640 × 480 fills the computer screen when
the monitor setting is 640 × 480. However, if the monitor setting is 1,024 × 768, the picture
only takes up part of the screen.
5
Getting to know your camera better
75
Page 76
ISO
A method for indicating film speed by the International Organization for Standardization
(ISO) (ex.gISO100h). Higher ISO values indicate greater sensitivity to light, so images
can be exposed even in low-light conditions.
JPEG (Joint Photographic Experts Group)
A compression format for still images. Photographs (pictures) taken using this camera are
recorded onto the card in JPEG format. By downloading these images to a computer,
users can edit them using graphics application software or view the images using an
Internet web browser.
NTSC (National Television Systems Committee) / PAL (Phase Alternating Line)
Television formats. NTSC is mainly used in Japan, North America and Korea. PAL is
mainly used in Europe and China.
PictBridge
A standard for connecting digital cameras and printers of different makers and printing out
pictures directly.
Pixels
A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed
images require millions of pixels.
Program auto
Also called Program AE mode. The camera automatically sets the best shutter speed and
5
aperture for the shot.
Sleep mode
A mode designed to save battery life. The camera automatically enters the sleep mode if
you do not operate it for a certain time. To exit the sleep mode, use any button on the
camera (shutter button, arrow pad (1243), etc.).
TFT (Thin-Film Transistor) Color Monitor
A transistor color monitor constructed using thin-film technology.
76
Getting to know your camera better
Page 77
6 Miscellaneous
Miscellaneous
6
Camera care
Cleaning the camera
Exterior:
• Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy
water and wring well. Wipe the camera with the damp cloth and then dry it with a dry
cloth. If you have used the camera at the beach, use a cloth soaked in clean water
and wrung well.
Monitor:
• Wipe gently with a soft cloth.
Lens:
• Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner.
Battery/Charger:
• Wipe gently with a soft, dry cloth.
Note
• Do not use strong solvents such as benzene or alcohol, or chemically treated
cloth.
• Mold may form on the lens surface if the lens is left dirty.
Storage
• When storing the camera for extended periods, remove the battery, AC adapter and
card, and keep in a cool, dry place that is well ventilated.
• Periodically insert the battery and test the camera functions.
Note
• Avoid leaving the camera in places where chemical products are handled since
this may result in corrosion.
6
Miscellaneous
77
Page 78
Battery and charger
(This camera uses one Olympus lithium ion battery (LI-12B). No other type of
batteries can be used.
(Power consumption by the camera varies depending on which functions are used.
(During the conditions described below, power is consumed continuously and the
battery becomes exhausted quickly.
• The zoom is used repeatedly.
• The shutter button is pressed halfway repeatedly in shooting mode, activating the auto
focus.
• A picture is displayed on the monitor for an extended period of time.
• The camera is connected to a computer or printer.
(Using an exhausted battery may cause the camera to turn off without displaying the
battery level warning.
(The rechargeable battery is not fully charged at the time of purchase. Charge the
battery fully with the LI-10C charger before use.
(The provided rechargeable battery usually takes approximately 120 minutes to
charge.
(This camera uses a charger specified by Olympus. Do not use any other type of
charger.
(The charger can be used within the range of AC 100 V to AC 240 V (50/60 Hz).
6
When using the charger abroad, you may need a plug adapter to convert the plug
to the shape of the AC wall outlet. For details, ask at your local electrical shop or
travel agent.
(Do not use travel voltage converters as they could damage your charger.
Miscellaneous
78
Page 79
Useful use of the accessories
IJijĻ Ĵı
Ĩı ķ įı Ĵ įij ķ
IJııĮıııĵ
ʼnŒ
IN
Ĵijķĵ
ijĵĵĹ
IN
The card
Pictures can be recorded on the optional card.
The internal memory and card are the camera’s media for recording pictures, similar to film
in a film camera.
Pictures recorded to the internal memory or card can be easily erased on the camera or
processed using a computer.
Unlike portable storage media, the internal memory cannot be removed or exchanged.
The number of recordable pictures can be increased by using a card with a larger capacity.
1 Index area
You can use this space to write the contents of the card.
2 Contact area
The part where the data transferred from the camera
enters the card.
Compatible cards
xD-Picture Card (16MB – 1GB)
Using the internal memory or card
You can confirm on the monitor whether the internal memory or card is being used during
shooting and playback operations.
Shooting mode Playback mode
[
]
IN
ĨıķįıĴįijķ
IJııĮıııĵ
ʼnŒ
IJijĻĴı
ĵ
P
ʼnŒʼnŒĴijķĵ
[
ȿijĵĵĹ
]
[
]
IN
44
Memory indicator
1
2
6
Miscellaneous
79
Page 80
Inserting and removing the card
1 Turn off the camera
2 Open the battery compartment/card
cover.
2
1
Inserting the card
3 Orient the card as shown, and
insert it into the card slot as
shown in the illustration.
• Insert the card straight in.
• Insert the card until it clicks into place.
6
Removing the card
3 Push the card all the way in and
release slowly.
• The card protrudes slightly and stops.
Miscellaneous
• Grasp the card and remove.
4 Close the battery compartment/card
cover.
Battery compartment/card
cover
Contact area
Notch
1
2
80
Page 81
Note
• The card access lamp blinks while the camera is
reading the images. Reading of images may take
some time. Do not open the battery compartment/card
cover while the card access lamp is blinking. Doing so
may damage the data in the internal memory or the
card and render the internal memory or card unusable.
Card access lamp
AC adapter
An AC adapter is useful for time-consuming tasks such as image downloads to
a computer or when running a slideshow for a long period of time. To use an AC
adapter for this camera, the multi-adapter (CB-MA1/accessory) is required.
Do not use any other AC adapter with this camera.
Note
• Do not remove or load the battery or connect or disconnect the AC adapter or
the multi-adapter while the camera is turned on. Doing so could affect the
camera’s internal settings or functions.
• The AC adapter can be used within the range of AC 100 V to AC 240 V (50/60
Hz).
• When using abroad, you may need a plug adapter to convert the plug to match
the AC wall outlet. For details, ask at your local electrical shop or travel agent.
• Do not use travel voltage converters as they could damage your AC adapter.
• The camera is not water resistant during AC adapter use.
• Be sure to read the instruction manual for the AC adapter.
6
Miscellaneous
81
Page 82
Safety Precautions
Caution for Usage Environment
• To protect the high-precision technology contained in this product, never leave the
camera in the places listed below, no matter if in use or storage:
• Places where temperatures and/or humidity are high or go through extreme
changes. Direct sunlight, beaches, locked cars, or near other heat sources (stove,
radiator, etc.) or humidifiers.
• In sandy or dusty environments.
• Near flammable items or explosives.
• In wet places, such as bathrooms or in the rain. When using products with
weatherproof designs, read their manuals as well.
• In places prone to strong vibrations.
• Never drop the camera or subject it to severe shocks or vibrations.
• When mounted on a tripod, adjust the position of the camera with the tripod head.
Do not twist the camera.
• Do not touch electric contacts on cameras.
• Do not leave the camera pointed directly at the sun. This may cause lens or shutter
curtain damage, color failure, ghosting on the CCD, or may possibly cause fires.
• Do not push or pull severely on the lens.
• Before storing the camera for a long period, remove the battery. Select a cool, dry
6
location for storage to prevent condensation or mold from forming inside the camera.
After storage, test the camera by turning it on and pressing the shutter release button
to make sure that it is operating normally.
• Always observe the operating environment restrictions described in the camera’s
manual.
Battery Handling Precautions
Miscellaneous
• This camera uses a lithium ion battery specified by Olympus. Do not use any other
type of battery. For safe and proper use, read the battery’s instruction manual
carefully before using it.
• If the battery’s terminals get wet or greasy, camera contact failure may result. Wipe
the battery well with a dry cloth before use.
• Always charge a battery when using it for the first time, or if it has not been used for
a long period.
• When operating the camera with battery power at low temperatures, try to keep the
camera and spare battery as warm as possible. A battery that has run down at low
temperatures may be restored after it is warmed at room temperature.
• The number of pictures you can take may vary depending on the shooting conditions
or battery.
•
Before going on a long trip, and especially before traveling abroad, purchase extra
batteries. A recommended battery may be difficult to obtain while traveling.
• Please recycle batteries to help save our planet’s resources. When you throw away
dead batteries, be sure to cover their terminals and always observe local laws and
regulations.
82
Page 83
LCD Monitor
• Do not push the monitor forcibly; otherwise the image may become vague, resulting
in a playback mode failure or damage to the monitor.
• A strip of light may appear on the top/bottom of the monitor, but this is not a
malfunction.
• When a subject is viewed diagonally in the camera, the edges may appear
zigzagged on the monitor. This is not a malfunction; it will be less noticeable in
playback mode.
• In places subject to low temperatures, the LCD monitor may take a long time to turn
on or its color may change temporarily. When using the camera in extremely cold
places, it is a good idea to occasionally place it in a warm place. An LCD monitor
exhibiting poor performance due to low temperatures will recover in normal
temperatures.
• The LCD used for the monitor is made with high-precision technology. However,
black spots or bright spots of light may appear constantly on the LCD Monitor. Due
to its characteristics or the angle at which you are viewing the monitor, the spot may
not be uniform in color and brightness. This is not a malfunction.
Legal and Other Notices
• Olympus makes no representations or warranties regarding any damages, or benefit
expected by using this unit lawfully, or any request from a third person, which are
caused by the inappropriate use of this product.
• Olympus makes no representations or warranties regarding any damages or any
benefit expected by using this unit lawfully which are caused by erasing picture data.
Disclaimer of Warranty
• Olympus makes no representations or warranties, either expressed or implied, by or
concerning any content of these written materials or software, and in no event shall
be liable for any implied warranty of merchantability or fitness for any particular
purpose or for any consequential, incidental or indirect damages (including but not
limited to damages for loss of business profits, business interruption and loss of
business information) arising from the use or inability to use these written materials
or software or equipment. Some countries do not allow the exclusion or limitation of
liability for consequential or incidental damages, so the above limitations may not
apply to you.
• Olympus reserves all rights to this manual.
6
Miscellaneous
83
Page 84
Warning
Unauthorized photographing or use of copyrighted material may violate applicable
copyright laws. Olympus assumes no responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of copyright owners.
Copyright Notice
All rights reserved. No part of these written materials or this software may be
reproduced or used in any form or by any means, electronic or mechanical, including
photocopying and recording or the use of any type of information storage and retrieval
system, without the prior written permission of Olympus. No liability is assumed with
respect to the use of the information contained in these written materials or software,
or for damages resulting from the use of the information contained therein. Olympus
reserves the right to alter the features and contents of this publication or software
without obligation or advance notice.
FCC Notice
• Radio and Television Interference
Changes or modifications not expressly approved by the manufacturer may void the
user’s authority to operate this equipment. This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
6
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
Miscellaneous
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Adjust or relocate the receiving antenna.
- Increase the distance between the camera and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
- Consult your dealer or an experienced radio/TV technician for help. Only the
OLYMPUS-supplied USB cable should be used to connect the camera to USB
enabled personal computers (PC).
Any unauthorized changes or modifications to this equipment would void the user’s
authority to operate.
84
Page 85
Index
! Red-eye reduction flash . . . . . 12
# Fill-in flash . . . . . . . . . . . . . . . . . 12
$ Flash off . . . . . . . . . . . . . . . . . . 12
% Super macro mode . . . . . . . . . . 12
& Macro mode . . . . . . . . . . . . . . . 12
1F button (exposure compensation)
. . . . . . . . . . . . . . . . . . . . . . . . . . 13
2Y button (self-timer) . . . . . . . . . 12
3# button (flash mode) . . . . . . . . . 12
4& button (macro) . . . . . . . . . . . . 12
O button . . . . . . . . . . . . . . . . . . . . 14
o button (OK/FUNC) . . . . . . . . . . 10
S button (erase) . . . . . . . . . . . . . . 13
h/P button (digital image stabiliza-
tion/printing pictures) . . . . . . . . . 13
A
AC adapter . . . . . . . . . . . . . . . . . . . 81
AF MODE . . . . . . . . . . . . . . . . . . . . 23
ALARM CLOCK k
ALBUM . . . . . . . . . . . . . . . . . . . . . . 31
ALBUM ENTRY
Album playback menus
ALL ERASE R . . . . . . . . . . . . . . . 31
ALL INDEX
ALL PRINT . . . . . . . . . . . . . . . . . . . 43
All-frame reservation U
Arrow pad (1243)
AUTO ( Auto-flash) . . . . . . . . . . . . . 12
AUTO (Full auto mode) . . . . . . . . . 10
AUTO (ISO) . . . . . . . . . . . . . . . . . . 21
AUTO (WB) WB AUTO . . . . . . . . . 21
Auto focus . . . . . . . . . . . . . . . . . . . 62
AV cable . . . . . . . . . . . . . . . . . . . . . 39
. . . . . . . . . . . . . 38
. . . . . . . . . . . . . . . 30
. . . . . . . . . 32
. . . . . . . . . . . . . . . . . . . 43
. . . . . . . . 48
. . . . . . . . . . 10
B
BACKUP . . . . . . . . . . . . . . . . . . . . 34
Battery . . . . . . . . . . . . . . . . . . . 78, 80
Battery compartment/card cover . . 80
BEEP . . . . . . . . . . . . . . . . . . . . . . . 35
BGM . . . . . . . . . . . . . . . . . . . . . . . . 24
BLACK & WHITE . . . . . . . . . . . . . . 26
BRIGHTNESS . . . . . . . . . . . . . . . . 28
C
CALENDAR . . . . . . . . . . . . . . . 26, 27
Calendar display . . . . . . . . . . . . . . . 11
CAMERA MENU . . . . . . . . . . . . . . . 21
Card . . . . . . . . . . . . . . . . . . 23, 34, 79
Card access lamp . . . . . . . . 55, 66, 81
CCD . . . . . . . . . . . . . . . . . . . . . 36, 75
Close-up playback U . . . . . . . . . . . 11
Cloudy day 3 . . . . . . . . . . . . . . . . 21
COLOR . . . . . . . . . . . . . . . . . . . . . . 35
Compression . . . . . . . . . . . . . . . . . . 19
Connector cover . . . . . . . . . . . . 39, 53
CUSTOM PRINT . . . . . . . . . . . . . . 43
D
Date and time X . . . . . . . . . . . . . 37
Digital image stabilization mode h
DIGITAL ZOOM . . . . . . . . . . . . . . . 22
Direct printing
DPOF . . . . . . . . . . . . . . . . . . . . 46, 75
DRIVE
DUALTIME l
. . . . . . . . . . . . . . . . . 41
. . . . . . . . . . . . . . . . . . . . . . . 22
. . . . . . . . . . . . . . . . 37
13
E
EASY PRINT . . . . . . . . . . . . . . . . . 41
EDIT . . . . . . . . . . . . . . . . . . . . . 26, 28
Erase . . . . . . . . . . . . . . . . . . . . . . . 31
Erasing pictures . . . . . . . . . . . . . . . 13
Error message . . . . . . . . . . . . . . . . 71
ESP . . . . . . . . . . . . . . . . . . . . . . 22, 75
ESP/n . . . . . . . . . . . . . . . . . . . . . 22
EV . . . . . . . . . . . . . . . . . . . . . . . 13, 75
Exposure compensation F . . . . . . 13
85
Page 86
F
FILE NAME . . . . . . . . . . . . . . . . . . 36
Flash charge . . . . . . . . . . . . . . . . . 60
Flash mode . . . . . . . . . . . . . . . . . . 12
Fluorescent lamp 1/2/3 wxy . 21
Focus . . . . . . . . . . . . . . . . . . . . . . . . 8
Focus lock . . . . . . . . . . . . . . . . . . . . 8
FORMAT . . . . . . . . . . . . . . . . . . . . 34
FRAME . . . . . . . . . . . . . . . . . . . . . 27
FRAME ASSIST . . . . . . . . . . . . 14, 39
Frame number . . . . . . . . . . . . . . . . 33
Function menu . . . . . . . . . . . . . . . . 10
G
GUIDE SHOOTING g . . . . . . 9
H
High speed sequential shooting i 22
Histogram display . . . . . . . 14, 39, 67
. . . . . . . . . . . . . . . . . . . . . . . . . 19
HQ
I
iESP . . . . . . . . . . . . . . . . . . . . . . . . 23
IMAGE QUALITY
Image size
INDEX . . . . . . . . . . . . . . . . . . . 26, 28
Index display
Information displays . . . . . . . . . . . . 14
Internal memory
ISO
. . . . . . . . . . . . . . . . . . . . . . 21, 76
. . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . 19, 75
. . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . 34
J
JPEG . . . . . . . . . . . . . . . . . . . . . . . 76
L
LAYOUT . . . . . . . . . . . . . . . . . . . . . 27
Lithium ion battery . . . . . . . . . . . . . 78
M
m button (MENU) . . . . . . . 11, 16
86
MEMORY FORMAT . . . . . . . . . . . . 34
Memory gauge . . . . . . . . . . . . . . . . 60
Menu . . . . . . . . . . . . . . . . . . . . . . . . 16
Menu guide . . . . . . . . . . . . . . . . . . . 15
Microphone . . . . . . . . . . . . . . . . . . . 29
Mode dial . . . . . . . . . . . . . . . . . . . . . 9
Monitor brightness adjustment s 37
MOVIE PLAY . . . . . . . . . . . . . . . . . 25
MULTI PRINT . . . . . . . . . . . . . . . . . 43
Multi-connector . . . . . . . . . . 39, 41, 53
N
NTSC . . . . . . . . . . . . . . . . . . . . 39, 76
Number of storable still pictures . . . 65
O
OLYMPUS Master . . . . . . . . . . . . . 49
Optical zoom . . . . . . . . . . . . . . . 11, 22
P
P (Program auto) . . . . . . . . . . . . . . 10
. . . . . . . . . . . . . . . . . . . . . 10
P/AUTO
PAL . . . . . . . . . . . . . . . . . . . . . . 39, 76
PANORAMA
. . . . . . . . . . . . . . . . . . . . . . . . . . 53
PC
PictBridge . . . . . . . . . . . . . . . . . 41, 76
Picture rotation y
PIXEL MAPPING . . . . . . . . . . . . . . 36
Pixels
PLAYBACK MENU
Playback mode q
Playback on a TV
Playing time/Total recording time . . 25
POWER button
Press fully
Press halfway . . . . . . . . . . . . . . . . . . 8
PRINT ORDER < . . . . . . . . . . . . . 29
Print settings < . . . . . . . . . . . . . . . 46
Printing pictures . . . . . . . . . . . . . . . 40
. . . . . . . . . . . . . . . . . . 23
. . . . . . . . . . . . . 29
. . . . . . . . . . . . . . . . . . . . . . . 76
. . . . . . . . . . . . . 24
. . . . . . . . 8, 14, 24
. . . . . . . . . . . . . . 39
. . . . . . . . . . . . . . . . . 8
. . . . . . . . . . . . . . . . . . . . . 8
Page 87
Program auto . . . . . . . . . . . . . . 10, 76
Protect 0 . . . . . . . . . . . . . . . . . . 29
PW ON SETUP . . . . . . . . . . . . . . . 35
R
REC VIEW . . . . . . . . . . . . . . . . . . . 36
Recording length . . . . . . . . . . . . . . 65
Recording sound . . . . . . . . . . . . . . 29
Recording sound with still pictures R
. . . . . . . . . . . . . . . . . . . . . . . . . . 23
REDEYE FIX . . . . . . . . . . . . . . . . . 26
Remaining recording time . . . . . . . . 9
RESET . . . . . . . . . . . . . . . . . . . . . . 20
Resizing Q . . . . . . . . . . . . . . . . . . 26
S
s (Scene) . . . . . . . . . . . . . . . 9, 20
SATURATION . . . . . . . . . . . . . . . . 28
SCREEN SETUP . . . . . . . . . . . . . . 35
SEL. ALBUM
SEL. IMAGE . . . . . . . . . . . . 30, 31, 33
SELECT JACKET
Selecting a language W
Self-timer lamp . . . . . . . . . . . . . 12, 66
Self-timer Y
SEPIA
SET ALL . . . . . . . . . . . . . . . . . . . . . 30
SET CALENDAR
SETUP . . . . . . . . . . . . . . . . . . . . . . 34
SHOOT & SELECT 1/2 e, f . . . 21
Shooting mode . . . . . 8, 11, 14, 16, 19
Shooting movies n
Shooting still pictures K
SHQ . . . . . . . . . . . . . . . . . . . . . . . . 19
Shutter button
SHUTTER SOUND
Single-frame erase S . . . . . . . . . . 13
Single-frame reservation < . . . . . . 47
Single-frame shooting o . . . . . . . 22
. . . . . . . . . . . . . . . . . 32
. . . . . . . . . . . . . 33
. . . . . . 35
. . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . . . 26
. . . . . . . . . . . . . . 30
. . . . . . . . . . . . . 8
. . . . . . . . . 8
. . . . . . . . . . . . . . . . . . 8
. . . . . . . . . . . . 35
Sleep mode . . . . . . . . . . . . . . . . 60, 76
SLIDESHOW m . . . . . . . . . . . . . . 24
SPOT (AF MODE) . . . . . . . . . . . . . 23
Spot metering 5 . . . . . . . . . . . . . . 22
SQ . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SQ1 . . . . . . . . . . . . . . . . . . . . . . . . . 19
SQ2 . . . . . . . . . . . . . . . . . . . . . . . . . 19
STANDARD . . . . . . . . . . . . . . . . . . 41
Sunny day 5 . . . . . . . . . . . . . . . . . 21
T
TITLE . . . . . . . . . . . . . . . . . . . . . . . 27
Top menu . . . . . . . . . . . . . . . . . . . . 16
Trimming P . . . . . . . . . . . . 26, 44, 47
Tungsten light 1 . . . . . . . . . . . . . . 21
TYPE . . . . . . . . . . . . . . . . . . . . . . . 24
U
UNDO ALL . . . . . . . . . . . . . . . . . . . 33
UNDO ENTRY (ALBUM ENTRY)
USB cable . . . . . . . . . . . 41, 49, 53, 56
USB driver
. . . . . . . . . . . . . . . . 50, 59
. . 33
V
VIDEO OUT . . . . . . . . . . . . . . . . . . 39
VOLUME . . . . . . . . . . . . . . . . . . . . . 36
W
Warning sound 8 . . . . . . . . . . . . . 35
White balance WB . . . . . . . . . . . . . 21
X
xD-Picture Card . . . . . . . . . . . . 23, 79
Z
Zoom . . . . . . . . . . . . . . . . . . . . . 11, 22
Zoom button
. . . . . . . . . . . . . . . . . . 11
87
Page 88
http://www.olympus.com/
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan
Two Corporate Center Drive, P.O. Box 9058, Melville, NY 11747-9058, U.S.A. Tel. 631-844-5000
Technical Support (USA)
24/7 online automated help: http://www.olympusamerica.com/support
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
Our phone customer support is available from 8 am to 10 pm
(Monday to Friday) ET
E-Mail: distec@olympus.com
Olympus software updates can be obtained at: http://www.olympus.com/digital
Premises: Wendenstrasse 14-18, 20097 Hamburg, Germany
Tel: +49 40-23 77 3-0 / Fax: +49 40-23 07 61
Goods delivery: Bredowstrasse 20, 22113 Hamburg, Germany
Letters: Postfach 10 49 08, 20034 Hamburg, Germany
European Technical Customer Support:
Please visit our homepage http://www.olympus-europa.com
or call our TOLL FREE NUMBER* : 00800 - 67 10 83 00
for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom
* Please note some (mobile) phone services providers do not permit access or request an
additional prefix to +800 numbers.
For all European Countries not listed and in case that you can’t get connected
to the above mentioned number, please make use of the following
CHARGED NUMBERS: +49 180 5 - 67 10 83 or +49 40 - 237 73 899
Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday)
2006
VH358001
Loading...