How it Works
Olympus
Loading...
FE-4040X
Instruction Manual
61 pgs2.39 Mb0
Instruction Manual
61 pgs2.5 Mb0
Quick start guide
2 pgs1.48 Mb0
Table of contents
Loading...

Olympus FE-4040X Instruction Manual

DIGITAL CAMERA
FE-4040/FE-4020/X-940
Instruction Manual
● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference.
● We recommend that you take test shots to get accustomed to your camera before taking important photographs.
● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specifi ed, the explanation about these illustrations is provided for FE-4040.
Contents
1
Step
Checking the contents of the box
or
Strap LI-70B Lithium Ion Battery
Digital camera
Other accessories not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location.
2
Step
Preparing the Camera
“Preparing the Camera” (p. 10)
4
Step
How to Use the Camera
“Camera Settings” (p. 3)
Contents
Names of Parts .............................. 6
¾
Preparing the Camera .................10
¾
Shooting, Viewing, and Erasing
¾
Using Shooting Modes ................ 20
¾
Using Shooting Functions .......... 23
¾
Menus for Shooting Functions ... 27
¾
AV cableUSB cable ib CD-ROM
Step
Step
¾
¾
... 14
¾
¾
¾
Shooting and Playing Back Images
“Shooting, Viewing, and Erasing” (p. 14)
Printing
“Direct printing (PictBridge)” (p. 37) “Print Reservations (DPOF)” (p. 40)
Menus for Playback, Editing, and
Printing Functions ....................... 30
Menus for Other Camera
Settings ........................................ 32
Printing ......................................... 37
Usage Tips ................................... 42
Appendix ...................................... 46
F-2AC USB-AC adapter
3
5
2
EN
Camera Settings
Using the Direct Buttons
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Arrow pad
The symbols FGHI displayed for image selections and settings indicate that the arrow pad is to be used.
H (left)
F (up) /
INFO button (change information display) (p. 16, 19)
I (right)
H button
G (down) / D button (erase) (p. 18)
(p. 12)
Shutter button (p. 14)
Zoom buttons (p. 16)
q button (switch between shooting and playback) (p. 15)
m button (p. 4)
E button (menu guide) (p. 19)
X
YMDTIME
MENU
Y/M/DY/M/D
SET
SINGLE PRINT
02 26 12 30:..2010
CANCEL
OK
’10/02/26 12:30’10/02/26 12:30
FILE
PRINT MORE
ORM
ORM
N
N
100 0004100 0004
4/304/30
14
M
OK
EN
3
Using the Menu
Using the Menu
Use the menu to change camera settings such as the shooting mode.
Press the m button to display the function menu. The function menu can be used to set frequently used shooting and playback functions such as shooting mode.
Shooting Playback
PROGRAM AUTOPROGRAM AUTO
Selected option
PP
Shooting
mode
SLIDESHOWSLIDESHOW
PERFECT FIX
EDIT
0.00.0
WB
AUTOWBAUTO
ISO
ISO
AUTO
AUTO
14
44
To select the shooting mode
Use HI to select a shooting mode and press the H button.
To select the function menu
Use FG to select a menu and use HI to select a menu option. Press the H button to set the function menu.
M
Function
menu
o [SETUP]
menu
In the [SETUP] menu, various camera functions can be set, including shooting and playback functions not displayed in the function menu, and other settings such as date, time and screen display.
Use FG to select a menu and press the H button.
ERASE
SETUP
1 Select [SETUP] and then press the H
button.
The [SETUP] menu is displayed.
●
COMPRESSIONCOMPRESSION NORMALNORMAL
AF MODE FACE/iESP
FINE ZOOM OFF
1
R OFF
2
IMAGE STABILIZER
3
ICON GUIDE
MENU
2 Press H to highlight the page tabs. Use
FG to select the desired page tab and press I.
Page tab
POWER SAVE
1
2
3
MENU
3 Use FG to select the desired submenu 1
and then press the H button.
POWER SAVEPOWER SAVE OFF
1
2
3
MENU
4
EN
OFF
OK
SETEXIT
OK
SETEXIT
BACK
1
2
3
1
2
3
MENU
MENU
Submenu 1
Submenu 2
POWER SAVE
OFFOFF
ON
4 Use FG to select the desired submenu 2
and then press the H button.
Once a setting is selected, the display returns
●
to the previous screen.
There may be additional operations.
ON
ON
OK
SETEXIT
OFFOFFPOWER SAVEPOWER SAVE
OK
SETEXIT
OFFOFFPOWER SAVEPOWER SAVE
OK
SET
“Menu Settings” (p. 27 to 36)
5 Press the m button to complete the
setting.
Some functions cannot be used in some
shooting modes. In such cases, the following message is displayed after setting.
1
2
3
MENU
COMPRESSIONCOMPRESSION NORMALNORMAL
AF MODE FACE/iESP
FINE ZOOM OFF
1
CONFLICTING SETTINGS
R OFF
2
IMAGE STABILIZER
3
ICON GUIDE
MENU
ONPOWER SAVEPOWER SAVE
OK
SETEXIT
ON
ON
OK
SETEXIT
Menu Index
Menus for Shooting Functions
PROGRAM AUTOPROGRAM AUTO
44
1 Shooting mode
P (PROGRAM AUTO) .......p. 14
M
(iAUTO) .................... p. 20
N (DIS MODE)*1 .............p. 20
s (SCENE MODE) ......p. 20
P (MAGIC FILTER) ..... p. 21
~ (PANORAMA) ...............p. 22
A (MOVIE) .......................p. 15
2 Flash ..................................p. 23
3 Macro ................................p. 23
*1
Available in the FE-4020/X-940 only.
*2
Available in the FE-4040 only.
1
PP
0.00.0
WB AUTOWBAUTO
ISO
ISO AUTO
AUTO
14
M
9
2 3 4 5 6 7 8
4 Self-timer ...........................p. 24
5 Exposure compensation ....p. 24
6 White balance .................... p. 25
7 ISO ....................................p. 25
8 Image size (Still images) ...p. 26 9 o (SETUP) X
z
(Shooting) / A (Movie)
IMAGE SIZE (Movies) .......p. 27
COMPRESSION (Still images)
.......................................p. 27
COMPRESSION NORMAL
AF MODE FACE/iESP
FINE ZOOM OFF
1
R
2
IMAGE STABILIZER
3
ICON GUIDE
MENU
Menus for Playback, Editing, and Printing Functions
SLIDESHOWSLIDESHOW
PERFECT FIX
EDIT
ERASE
SETUP
1 SLIDESHOW ..................... p. 30
2 PERFECT FIX ................... p. 30
3 EDIT ..................................p. 30
4 ERASE ..............................p. 30
Menus for Other Camera Settings
FORMAT
BACKUP
1
1
RESET
2
USB CONNECTIONWSTORAGE
2
q POWER ON NO
3
3
SAVE SETTINGS
MENU
ENGLISH
1
5
2 3 4
5 o (SETUP) X q (Playback)
PRINT ORDER .................. p. 31
0 (Protect) .....................p. 31
y (Rotate).........................p. 31
R (Add sound to still images)
.......................................p. 31
1 r (Settings 1)
MEMORY FORMAT/
FORMAT ............................ p. 32
BACKUP ............................p. 32
W (Language) ................. p. 32
RESET...............................p. 32
USB CONNECTION .......... p. 33
NO
SETEXIT
q POWER ON ................p. 33
SAVE SETTINGS .............. p. 33
OK
PRINT ORDER
0
y
1
R
2
3
MENU
OFF
ON
ON
OK
SETEXIT
OK
SETEXIT
IMAGE SIZE VGA
FRAME RATE 30fps
IS MOVIE MODE
1
R
2
3
MENU
FRAME RATE (Movies) .....p. 27
AF MODE ..........................p. 28
FINE ZOOM ......................p. 28
IMAGE STABILIZER (Still images)*2/IS MOVIE MODE
(Movies) .............................p. 28
R (Still images) .................. p. 29
R (Movies) ......................... p. 29
ICON GUIDE .....................p. 29
2 s (Settings 2)
PW ON SETUP .................p. 33
SOUND SETTINGS ..........p. 34
PIXEL MAPPING ............... p. 34
s (Monitor) .....................p. 34
X (Date/time) .................. p. 34
WORLD TIME....................p. 35
VIDEO OUT ....................... p. 35
3 t (Settings 3)
POWER SAVE...................p. 36
OFF
ON
OK
SETEXIT
EN
5

Names of Parts

Camera unit
1
2
3
5 6
7
8
4
FE-4020/X-940
1 2
3
1 Connector cover .......... p. 11, 12, 35, 37
2 Multi-connector ........... p. 11, 12, 35, 37
3 Strap eyelet ..................................... p. 7
4 Battery/card compartment cover ... p. 10
5 Self-timer lamp .............................. p. 24
6
EN
9
10
8
9
4
6 Flash ............................................. p. 23
7 Lens ........................................ p. 46, 59
8 Microphone ............................. p. 29, 31
9 Speaker 10 Tripod socket
10
1
2
6
7
3
8
4
5
1 Shutter button ...............................p. 14
2 n button ........................p. 12, 14
3 q button (switch between shooting
and playback) ................................p. 15
4 Monitor .................................... p. 14, 42
5 m button ...................................p. 4
6 Zoom buttons ................................p. 16
Attaching the camera strap
Pull the strap tight so that it does not come loose.
9
10
7 Indicator lamp ......................... p. 11, 12
8 H button (OK) .......................... p. 3, 12
9 Arrow pad ........................................ p. 3
INFO button (change information
display) .............................p. 16, 19
D button (erase) ....................p. 18
10 E button (menu guide) .................p. 19
EN
7
Monitor
Shooting mode display
1 2 1 2
AUTOWBAUTO
AUTO
AUTO
14
PP
3 4 5
0.00.0
6
PP
WB
7
ISO
ISO
8
M
9 10
17
0:340:34
VGA
ONON
Movie
18
17
44
16 16
ORM
N
ONON
131415 1213915 11
12
1/100 F2.6F2.6
1/100
1920
Still image
AUTOWBAUTO
4 5
0.00.0
6
WB
7
10
1 Battery check ................................ p. 11
2 Shooting mode ........................ p. 14, 20
3 Flash .............................................p. 23
Flash standby/fl ash charge ........... p. 42
4 Macro ............................................ p. 23
5 Self-timer ....................................... p. 24
6 Exposure compensation ...............p. 24
7 White balance ............................... p. 25
8 ISO ................................................p. 25
9 Image size ............................... p. 26, 27
10 [SETUP] menu ............................p. 4, 5
11 Recording with sound (movies)
........... ......................................... p. 29
*1
Available in the FE-4040 only.
8
EN
12 World time ..................................... p. 35
13 Image stabilization (still images)
Digital image stabilization (movies)
.................................................... p. 28
*1
/
14 Compression (still images) ............ p. 27
15 Number of storable pictures (still
images) ......................................... p. 14
Continuous recording length (movies)
.................................................... p. 15
16 Current memory ............................p. 48
17 AF target mark ..............................p. 14
18 Camera shake warning ....................... -
19 Aperture value ............................... p. 14
20 Shutter speed ................................ p. 14
Playback mode display
6
Normal display
●
1 65432 1
●
Detailed display
1010
’10/02/26 12:30’10/02/26 12:30
Still image Movie
4/30
4/30
15
1 6 87 9 11105432
1010
4/304/30
1/1000 F2.6 2.0
P
1/1000 F2.6 2.0
P
N
FILE
100 0004
’10/02/26 12:30
ISO
ORM
18 17
AUTOWBAUTO
14
M
’10/02/26 12:30
16
FILE
100 0004
ISO
AUTO
ORM
N
WB
AUTO
14
4
2/00:3400:12/00:34
00:1
12
13
M
14
15
1 Battery check ................................ p. 11
2 Print reservation/
number of prints ...................p. 40/p. 39
3 Protect ........................................... p. 31
4 Adding sound .......................... p. 29, 31
5 Current memory ............................ p. 48
6 Frame number/total number of images
(still images) .................................. p. 16
Elapsed time/total recording time
(movies) ........................................ p. 17
7 Shooting mode ........................ p. 14, 20
8 Shutter speed ................................ p. 14
9 Aperture value ............................... p. 14
10 ISO ................................................ p. 25
11 Exposure compensation ............... p. 24
12 White balance ...............................p. 25
13 Image size ............................... p. 26, 27
14 File number ......................................... -
15 Date and time ................................ p. 12
16 Compression (still images) ............ p. 27
Frame rate (movies) ......................p. 27
17 Macro ............................................p. 23
18 Flash ............................................. p. 23
EN
9

Preparing the Camera

Inserting the battery and the SD/SDHC memory card (sold separately)
Always use SD/SDHC memory cards with
this camera. Do not insert any other types of memory card.
1
2
11
Battery/card compartment cover
2
FE-4040 FE-4020/X-940
Battery lock knob
Write-protect switch
Contact area
Insert the battery by putting in the ▼
marked side fi rst, with the B (FE-4040)/ C (FE-4020/X-940) mark toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion.
Insert the battery while sliding the battery
lock knob in the direction of the arrow.
Slide the battery lock knob in the direction
of the arrow to unlock, and then remove the battery.
Turn off the camera before opening the
battery/card compartment cover.
When using the camera, be sure to close
the battery/card compartment cover.
Insert the card straight until it clicks into
place.
Do not touch the contact area directly.
3
11
2
This camera allows the user to take pictures
using the internal memory even when no SD/SDHC memory card (sold separately) is inserted. “Using an SD/SDHC memory card” (p. 47)
“Number of storable pictures (still images)/
Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 49)
To remove the SD/SDHC memory card
12
Press the card in until it clicks and comes
out slightly, then grab the card and pull it out.
10
EN
Charging the battery with the supplied USB-AC adapter
The included F-2AC USB-AC adapter
(with an AC cable or plug-in type; hereafter referred to as AC adapter) differs depending on the region where you purchased the camera. If you received a plug-in type AC adapter, plug it directly into an AC outlet.
The included AC adapter has been designed
to be used only for charging. Make sure that operations such as shooting, viewing images and so on are not being used while the AC adapter is connected to the camera.
Example: AC adapter with an AC cable
1
Multi-connector
The battery is not fully charged at the time
of purchase. Before use, be sure to charge the battery until the indicator lamp turns off (up to 3 hours).
If the indicator lamp does not light, the
camera is not correctly connected or the battery, camera, or AC adapter may be damaged.
For details on the battery and the AC
adapter, see “Battery and AC adapter (included)” (p. 46).
When to charge the batteries
Charge the battery when the error message shown below appears.
Flashes in red
AC outlet
2
FE-4040
FE-4020/X-940
3
2
USB cable (supplied)
Indicator lamp On: Charging Off: Charged
Connector cover
1
BATTERY EMPTY
44
Monitor top left Error message
EN
11
Installing the supplied computer software (ib)
After checking the system requirements, follow the instructions below to connect the camera to a computer and install the supplied computer software (ib).
System requirements
Windows XP (Service Pack 2 or later)/ Windows Vista/Windows 7
Connecting the camera
Multi-connector
Connector cover
Indicator lamp
FE-4040
FE-4020/X-940
Computer (on and running)
USB cable (supplied)
2
Connect the camera to the
computer.
3
Follow the on-screen instructions
on your computer.
Operation guide
Operation guides displayed at the bottom of the screen indicate that the m button, H button, or zoom buttons should be used.
COMPRESSION NORMAL
AF MODE FACE/iESP
FINE ZOOM OFF
1
R
2
IMAGE STABILIZER
3
ICON GUIDE
MENU
Operation guide
OFF
ON
ON
SEL. IMAGE
OK
SETEXIT
OK
SET
OK
ERASE/CANCEL
MENU
Setting the date, time and time zone
The date and time set here are saved to image fi le names, date prints, and other data.
1
Press the n button to turn on
the camera.
The date and time setting screen is displayed
●
when the date and time are not set.
For information on using the computer
software (ib), see the software’s online help.
1
Insert the supplied CD in a CD-ROM
X
Y M D TIME
-- -- -- --
--------
Y/M/D
:..
drive.
A setup screen will appear on the computer
●
monitor.
If the setup window is not displayed,
select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the icon for the CD-ROM drive to open the setup CD window and then double-click “CameraInitialSetup.exe”.
12
EN
MENU
CANCEL
Date and time setting screen
2
Use FG to select the year for [Y].
X
Y M D TIME
-- -- -- --
20102010
CANCEL
:..
MENU
Y/M/D
Changing the display language
The language for the menu and error messages displayed on the monitor is adjustable.
1
Display the [SETUP] menu.
“Using the Menu” (p. 4)
2
Use FG to select the r (Settings
1) tab and then press I.
3
Press I to save the setting for [Y].
X
Y M D TIME
-- -- ------
:..2010
MENU
CANCEL
4
As in Steps 2 and 3, use FGHI
and the H button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order).
For a more accurate setting, press the
H button when the time signal hits 00 seconds while setting the minutes.
To change the date and time, adjust the
setting from the menu. [X] (Date/time) (p. 34)
5
Use HI to select your home time
zone and press the H button.
Use FG to turn daylight saving time ([SUMMER])
●
on or off.
’10.02.26.12:30
Seoul
Seoul Tokyo
Tokyo
Y/M/D
FORMATFORMAT
BACKUP
W
1
RESET
2
USB CONNECTION q POWER ON NO
3
SAVE SETTINGS
MENU
3
Use FG to select [W] and press
ENGLISH
STORAGE
the H button.
4
Use FGHI to select your
language and press the H button.
5
Press the m button.
NO
OK
SETEXIT
SUMMER
The menus can be used to change the
selected time zone. [WORLD TIME] (p. 35)
SET
OK
13
EN

Shooting, Viewing, and Erasing

Shooting with the optimum aperture value and shutter speed [PROGRAM AUTO]
In this mode, automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, etc. as needed.
1
Press the n button to turn on
the camera.
[PROGRAM AUTO] indicator
44
Number of storable still pictures (p. 49)
Monitor
(standby mode screen)
If the [PROGRAM AUTO] indicator is not
displayed, press the m button to display the function menu and then set the shooting mode to P. “Using the Menu” (p. 4)
Current shooting mode display
PROGRAM AUTOPROGRAM AUTO
PP
2
Hold the camera and compose the
shot.
Monitor
Horizontal grip
PP
Vertical grip
0.00.0
WB
AUTOWBAUTO
ISO
ISO
AUTO
AUTO
14
M
When holding the camera, take care not to
cover the fl ash with your fi ngers, etc.
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
●
exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green.
●
The camera was unable to focus if the AF target mark fl ashes red. Try focusing again.
AF target mark
PP
Press halfway
0.00.0
WB
AUTOWBAUTO
ISO
ISO
AUTO
AUTO
14
44
Press the n button again to turn off
the camera.
14
EN
M
“Focusing” (p. 44)
1/400 F2.61/400 F2.6
Shutter speed Aperture value
4
0:00
RECREC
0:34
0:00
0:34
To take the picture, gently press
the shutter button all the way down while being careful not to shake the camera.
Press fully
1/400 F2.61/400 F2.6
Image review screen
To view images during shooting
Pressing the q button enables playback of images. To return to shooting, either press the q button or press the shutter button halfway down.
Shooting movies [MOVIE]
1
Press the m button to display
the function menu screen.
PROGRAM AUTOPROGRAM AUTO
44
3
Press the shutter button halfway
down to focus on the subject, and gently press the button all the way down to start recording.
PP
Press halfway
0:34
0:34
RECREC
0:00
Press fully
4
Gently press the shutter button all
the way down to stop recording.
Sound will also be recorded.
PP
0.00.0
WB
AUTOWBAUTO
ISO
ISO
AUTO
AUTO
14
M
During sound recording, only the digital zoom can be used. To record a movie with optical zoom, set [R] (movies) (p. 29) to [OFF].
0:00
Continuous recording length (p. 49)
Current length
Lights up red when recording
2
Use HI to set the shooting mode
to A and then press the H button.
VGA
0:340:34
[MOVIE] indicator
0.00.0
WB
AUTOWBAUTO
EN
15
Using the zoom
Pressing the zoom buttons adjusts the shooting range.
Pressing the wide
(W) button
Zoom bar
44
Optical zoom: 4x
Digital zoom: 4x
When shooting with the camera zoomed in,
select [ON] for [IMAGE STABILIZER] (p. 28) (FE-4040) or select [DIS MODE] (p. 20) for the shooting mode (FE-4020/X-940).
To take larger images without reducing image quality [FINE ZOOM] (p. 28)
The zoom bar appearance identifi es the
status of the fi ne zoom/digital zoom.
When using optical zoom and digital zoom
When using fi ne zoom
Pressing the telephoto (T) button
PP
0.00.0
WB AUTOWBAUTO ISO
ISO AUTO
AUTO
14
M
Optical zoom range
44
Digital zoom
Fine zoom range
range
Changing the shooting information display
The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display.
1
Press F (INFO).
The displayed shooting information changes in
●
PP
0.00.0
WB
AUTOWBAUTO
ISO
ISO
AUTO
AUTO
14
M
the order shown below each time the button is pressed. “Shooting mode display” (p. 8)
Normal
PP
0.00.0
WB AUTOWBAUTO
No information
ISO
ISO AUTO
AUTO
44
14M
Detailed
PP
0.00.0
WB AUTOWBAUTO ISO
ISO AUTO
AUTO
44
N
ORM
14M
Viewing images
1
Press the q button.
Number of frames/
Total number of images
4/30
4/30
’10/02/26 12:30’10/02/26 12:30
Playback image
16
EN
2
Use HI to select an image.
Operations during movie playback
Displays previous
image
Hold I to fast forward and hold H to
reverse.
The display size of the images can be
changed. “Index view and close-up view” (p. 18)
Displays next image
To play sound recordings
To play sound recorded with an image, select the image and press the H button. A ! icon appears on images with which sound has been recorded.
[R] (still images) (p. 29, 31)
During audio playback
To play back movies
Select a movie, and press the H button.
4/30
4/30
MOVIE PLAYMOVIE PLAY
OK
Movie
’10/02/26 12:30’10/02/26 12:30
Elapsed time/
Total recording
time
Pausing and
resuming
playback
Fast forward
Rewind
Adjusting the
volume
Press the H button to pause playback. To resume playback during pause, fast forward, or rewind, press the H button.
Press I to fast forward. Press I again to increase the fast forward speed.
Press H to rewind. The rewinding speed increases each time H is pressed.
Use FG to adjust the volume.
00:12/00:3400:12/00:34
During playback
Operations during pausing playback
00:14/00:3400:14/00:34
During pause
Cueing
Advancing
and rewinding
one frame at
a time
Resuming
playback
Press F to display the fi rst frame and press G to display the last frame.
Press I or H to advance or rewind one frame at a time. Hold I or H pressed for continuous advance or rewind.
Press the H button to resume playback.
To stop movie playback
Press the m button.
EN
17
Erasing images during playback (Single image erase)
1
Display the image you want to erase
and press G (D).
ERASE
Index view and close-up view
Index view enables quick selection of a desired image. Close-up view (up to 10x magnifi cation) allows checking of image details.
1
Press the zoom buttons.
ALL ERASE
SEL. IMAGE
ERASE
CANCEL
CANCEL
MENU
BACK
2
Press FG to select [ERASE], and
press the H button.
[ALL ERASE] (p. 30) and [SEL. IMAGE]
(p. 30) can be used to erase multiple images at the same time.
SET
Single-image view Close-up view
4/30
4/30
W
OK
’10/02/26 12:30’10/02/26 12:30
T
’10/02/26
4/30
4/30
12:30’10/02/26 12:30
WT
Index view
’10/02/26
2
2
44
WT
’10/02/26
24
42
To select an image in index view
Use FGHI to select an image, and press the H button to display the selected image in single-image view.
To scroll an image in close-up view
Use FGHI to move the viewing area.
18
EN
Changing the image information display
Shooting information settings displayed on the screen can be changed.
1
Press F (INFO).
The displayed image information changes in
●
the order shown below each time the button is pressed.
Normal
1010
4/30
4/30
No information
’10/02/26 12:30’10/02/26 12:30
Detailed
1010
4/304/30
1/1000 F2.6 2.0
ISO
P
AUTOWBAUTO
14
M
ORM
N
FILE
100 0004
’10/02/26 12:30
Using the menu guide
If the E button is pressed while settings are being made in the playback function or [SETUP] menu, a description of the selected option is displayed.
“Using the Menu” (p. 4)
EN
19
Loading...
+ 42 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use