Olympus FE-120/X-700, X-700, FE-120 Quick Start Manual
HQ
2816
2112
HQ
2816
2112
HQ
2816
2112
SELECTGOGO
OK
1AG6P1P2735-- VH193801
FE-120/X-700
Quick Start Guide
Start Here
BEFORE YOU BEGIN
Gather these items (box contents)
This box also contains:
Advanced Manual (CD-ROM),
Digital Camera Strap xD-Picture Card
AA (R6) Batteries (two) USB Cable OLYMPUS Master software
For more information,
please refer to the Basic & Advanced Manual
or visit www.olympusamerica.com/support
CD-ROM
Basic Manual, Warranty card,
Registration card.
Contents may vary depending on
purchase location.
GETTING STARTED
a. Attach the strap
TAKE A PICTURE
a. Zoom
Zoom out: Zoom in:
or
55
HQ
2816
55
HQ
2816
2112
2112
REVIEW OR ERASE A PICTURE
a. Press $ b. Take a closer look
The last picture taken will be
displayed.
$ button
Prev.
picture
Zoom button
Arrow pad
Next
picture
Press to zoom in or out.
Press a/c or b / d to scroll around.
Scroll left Scroll right
Press # button to return to shooting
mode.
b. Insert the batteries
Battery
compartment cover
2 Lift
1 Slide
3
b. Focus
1 Using the monitor, place the AF
target mark over your subject.
Green lamp
HQ
2816
AF target mark
2 Press and hold the shutter
button halfway to lock focus.
The green lamp indicates focus
is locked.
Scroll up
Scroll down
(Half-pressed)
55
2112
Shutter button
1 Display the picture you want to erase, and
2 Press a/c to select
c. Take the picture
Press the shutter button
completely to take the
picture.
(Pressed completely)
c. To erase a picture
press the S button.
S button
[YES], and press Z
button.
The picture is
permanently deleted.
c. Set the date and time
1 Set the mode dial to h and turn the camera on. Then press Z button and select X.
Mode dial
POWER
2 Press a/ c to set item. Press b/d to select next field.
2005
SELECT
X
.
.
01 01
YMD
:
00 00
GOOKSET
Prev.
field
CAMERA DIAGRAM
Shutter button
SELECT
SELECT GO
ERASE
YES
NO
OK
OK
USB connector
DC-IN jack
Battery compartment cover
Shooting button (#)
Monitor
Playback button ($)
Erase button (S)
Tripod socket
POWER switch
Card access lamp
Self-timer lamp
Shutter button
Set
Arrow pad
Next
field
Set
Flash
Lens
Zoom button
(W/T, GU)
Mode dial
Mode dial
Strap eyelet
Arrow pad
(acbd)
Card cover
TRANSFER IMAGES
1 Connect the camera and computer using the USB cable (included).
The monitor will turn on automatically.
a. Install the software
1 Insert the OLYMPUS
Master CD-ROM
provided into the
CD-ROM drive.
2 Windows: Click the
“OLYMPUS Master”
button.
Macintosh: Double-click
the “Installer” icon.
3 Simply follow the
on-screen instructions.
Printed in Japan 2005
2 Press a/c to select [PC] and press the
Z button.
Your PC will now recognize your camera as a removable storage drive.
b. Connect the camera to the computer
USB cable
USB
P C
PRINT
EXIT
SELECT GO
c. Transfer images to the computer
1 With the camera now connected, open
OLYMPUS Master.
The transfer window should appear.
2 Select the images you want to transfer, and
click the [TRANSFER IMAGES] button.
If the transfer images window does not
automatically appear:
a. Click the “Transfer Images” icon.
OK
b. Click the “From Camera” icon and
then click [TRANSFER IMAGES].
Transfer window
Transfer images
button
Loading...