Olympus DCN, DCN4, DCN2, DCN1, DCN3 Installation Instructions Manual

...

Installaon Instrucons Page 1

DCN Series

Cam Lock Dimensions

For Mat. Thickness

DCN1 3/4" 1-1/16" 3/4" 1-3/8" 1"

DCN2 7/8" 1-3/16" 7/8" 1-1/2" 1-1/8"

DCN3 1-1/8" 1-7/16" 1-1/8" 1-3/4" 1-3/8"

DCN4 1-1/2" 1-13/16" 1-1/2" 2-1/8" 1-3/4"

Straight Cam (X)

Inbent Cam (Y)

Outbent Cam (Z)

Cylinder Length (A)

Mounng Cutout

Lipped/ Overlay

Overlay

Flush

Title

Installaon instrucons for DCN series cam lock

Series

DCN

Barrel Length

See Chart

Bolt type

Cam Lock

Mounting

Surface

Revision Date

11/2012

Installaon Instrucons Page 2

All below congurations can be used with straight cam

DCN

or oset cam (in either the inbent or outbent position).

Function:

right-hand door, vertical drawer

Outer cam driver

Rear view

Function:

Hole position

Reversible cam stop

Cam installation:

Place pin of reversible cam stop in hole #1. Place cam as pictured above. Assemble outer cam driver so that the pin from the cam is to left of the “ears.” Screw in cam screw until tight.

DOOR

360° key rotation

Key removable at cam

positions 9:00 and 12:00

DRAWER