Oki LD630, LD640 Network Interface Manual
LD630/LD640
Network Interface Manual
Technical Reference
- 2 -
■ Table of Contents
1. Specifications................................................................................................................. 3
2. How to Connect.............................................................................................................. 5
2-1 Initial Wireless LAN Connection (Windows 2000) .................................................... 6
2-2 Initial Wireless LAN Connection (Windows XP, Server 2003) .................................. 6
2-3
Initial Wireless LAN Connection (Windows Vista, Server 2008, Server 2008R2, 7)
2-4 Initial Wireless LAN Connection (Windows 8, Server 2012) .................................. 17
3. Configuration ............................................................................................................... 21
3-1 Configuration Tool ...................................................................................................... 23
3-2 Web Browser .............................................................................................................. 30
3-3 FTP ............................................................................................................................. 33
3-4 Telnet .......................................................................................................................... 35
4. SMTP ............................................................................................................................. 36
5. Ethernet/WLAN Test by using Windows Test Page................................................... 39
6. Factory Reset ............................................................................................................... 45
7. Troubleshooting ........................................................................................................... 47
. 11
LD630/LD640
- 3 -
Manufacturer
Model Name
CNET
CWD-854
TP-Link
TL-WN32G
D-Link
DWA-110
D-Link
DWL-G122
Buffalo
WLI-U2-SG54HP
ZIO
F7
Manufacturer
Model Name
3COM
3CRUSB10075
PCI
GW-US54GXS
ZYXEL
AG-225H
Manufacturer
Model Name
PREMIERTEK
PL-H5DN-3070
TP-Link
TL-WN321G
Manufacturer
Model Name
IOGEAR
GWU-625
ZIO
ZIO-3000NU
AZiO
AWU212N
1. Specifications
(1) WLAN USB Adapter (IEEE 802.11b/g)
LD630/LD640 requires WLAN USB adapter to use the wireless LAN function.
LD630/LD640 is compatible with WLAN adapters using the Ralink RT73, ZD1211rw
chipset. WLAN USB adapters using chipsets other than Ralink RT73, ZD1211rw won’t
work when they are connected to LD630/LD640.
The following products are recommended. (Test completed)
RT73 chipset
ZD1211rw chipset
RT2070sta chipset
8712u chipset(support 802.11 b/g/n)
- 4 -
(2) Ethernet / WLAN Protocol
Layer
Protocol
Network Layers
ARP, IP, ICMP
Transport Layers
TCP, UDP
Application Layers
DHCP, DNS
Raw Print
SMTP (notify printer status)
HTTP, HTTPS (setting)
FTP (settings)
TELNET (settings)
(3) Ethernet Security
- HTTPS (SSL2.0, SSL3.0, TLS1.0)
LD630/LD640
(4) WLAN Security
- WEP64/128
- WPA/WPA2 (TKIP/AES-CCMP) PSK
- EAP(PEAP, FAST, LEAP, TTLS)
- HTTPS (SSL2.0, SSL3.0, TLS1.0)
LD630/LD640
- 5 -
A P
2. How to Connect
Both Ethernet and WLAN can be configured through the printer’s Ethernet interface.
Likewise, both Ethernet and WLAN can also be configured though the printer’s WLAN
interface. When you want to change the Ethernet or WLAN of the printer, the network
settings of the host (PC, PDA, etc) and Ethernet or WLAN of the printer must configured
properly configured so that communication can be established.
(1) Connecting Printer
1) LAN
Connect the LAN cable to the printer
A direct cable or cross cable can be connected to the Hub or Host for use.
2) WLAN
Connect to the AP (Access Point) configured in Infrastructure mode in order to connect
to the LAN/wireless network.
Infrastructure Mode
In order to configure the network between wireless terminals, connect to the terminal in
Ad-hoc Mode.
Ad-hoc Mode
LD630/LD640
- 6 -
2-1 Initial Wireless LAN Connection (Windows 2000)
Windows 2000 does not support wireless network setting.
When you use Windows 2000, you need to set the utility option as below after installing
utility program related to the wireless lan driver that you use.
- Network mode : Ad-hoc
- SSID : OKI_adhoc
- IP address : 192.168.1.2
- Subneet Mask : 255.255.255.0
- Authentication(Encrpition) : Open(None)
2-2 Initial Wireless LAN Connection (Windows XP, Server 2003)
When wireless utility program is installed, you have to set the wireless control values
via the program, otherwise you have to terminate the program in order to do proper
setting after following the steps 'Control Panel>>Administrative tools>>
Services>>Wireless Zero Configuration>>Start'.
1) Right click on the icon, and select Properties.
2) Select and right click on the Wireless Network Connection, and then select Properties.
- 7 -
3) Select Internet Protocol (TCP/IP), and then click Properties.
4) Set the IP settings as shown below, and then click OK.
LD630/LD640
LD630/LD640
- 8 -
5) Select the Wireless LAN tab, and then select “Use Windows to configure my wireless
network settings.”
Click the [Advanced] button.
6) Select “Computer-to-computer (ad hoc) network only.”
- 9 -
7) Click the [Add] button.
LD630/LD640
8) Enter “OKI_adhoc” as the Network name (SSID).
Select the connection, even if the network is not broadcasted.
Network Authentication: Select [Open]
Data Encryption: Select [Disabled]
Click the [OK] button.
LD630/LD640
- 10 -
9) Click the “Connect” tab and check “Connect when this network is in range.”
10) Check whether the settings are updated as shown below, and then click [Close]
When the printer is set to the default value (Adhoc mode, SSID: OKI_adhoc), it will
automatically connect.
LD630/LD640
- 11 -
2-3 Initial Wireless LAN Connection (Windows Vista, Server 2008, Server
2008R2, 7)
When wireless utility program is installed, you have to set the wireless control values
via the program, otherwise you have to terminate the program in order to do proper
setting after following the steps 'Control Panel>>Administrative tools>>
Services>>Wireless Zero Configuration>>Start'.
1) Click the “Start>>Conftrol Panel”.
2) Click the “View network status and tasks”.
- 12 -
3) Click the “Change adapter settings”.
LD630/LD640
Click the “wireless network adaptor’s Properties”.
4) Select Internet Protocol Version 4(TCP/IPv4), and then click Properties.
- 13 -
5) Set the IP settings as shown below, and then click OK.
LD630/LD640
6) Click the “Manage wireless networks”.
- 14 -
7) Click the “Add”.
LD630/LD640
8) Click the “Create an ad hoc network”.
- 15 -
9) Click the “Next”.
LD630/LD640
10) ‘Network name’ = OKI _adhoc,
‘Security type’ = Open,
‘Save this network’ check, and then click the “Next”.
- 16 -
11) Click the “Close”.
LD630/LD640
12) After completing configuration, OKI_adhoc network will be created.
When the printer is set to the default value (Adhoc mode, SSID: OKI_adhoc),
it will automatically connect.
Loading...