Oki C 9300 User Manual

C9300/C9500

2nd/3rd Tray

Installation Instructions

Tray Part Number: 41945801

PHASE 1:INSTALL THE

UXILIARY TRAY(S)

Caution!

• The printer weighs 160 lbs. (72 kg); use at least 2 people to lift the printer.

• Grasp the printer using the hand holds on the sides and on the back.

• Use proper lifting techniques. Turn off the printer.

You can install up to two auxiliary paper trays on the printer, or one Auxiliary Tray and one High Capacity Feeder.

Before you start, find an extra person to help guide you in placing the printer on the pins.

1. Unpack the tray(s) and remove the shipping materials.

2. Turn off the printer and unplug the power cord.

3. Remove the interface cable.

4. Move the tray into position (paper tray facing front), noting the location of the pins (1) and connector (2).

one, aligning the holes/connector in the bottom of the upper tray with pins/connector on the lower tray.

6. Grasp and lift the printer by the hand holds on the sides and back.

7. Lower the printer onto the auxiliary tray(s), aligning the printer with the tray(s) and lowering the holes/ connector in the bottom of the printer onto the pins/connector on the tray. (It helps to have an extra person to watch and guide you in placing the printer on the pins.)

recognizing the newly installed trays:

a. Press MENU repeatedly until

MEDIA MENU appears on the display.

b. Press ITEM + repeatedly until

you see TRAY2 MEDIATYPE on the display.

c. If you installed two trays, press

ITEM + until you see TRAY3 MEDIATYPE on the display.

d. If you do not see TRAY2

MEDIATYPE or TRAY3 MEDIATYPE, the printer is not properly attached to the connector on the tray(s) and you need to lift the printer and reposition it.

PHASE 2: LOAD PRINT MEDIA

1. Pull out the tray.

a. If necessary, lift out the media

indicator at the right end of the tray and reposition it to correspond with the media you will normally use in that tray.

5. If you are installing two trays, place the first tray on top of the second

58364901

b. Position the paper guides in the

tray.

8. Reattach the interface cable.

9. Plug the power cord in and turn on the printer.

10. Access the printer menu and check to be sure that the printer is

Continued

c. For legal size and larger media,

position the brackets.

2. If using paper, fan it.

3. Place the print media in the tray.

4. Gently push back in the tray.

5. Set the Media Weight. You can use paper up to 54 lb. US Bond (113 lb. Index) in the auxiliary trays. The default setting is Auto. If you are consistently using a specific weight paper in the auxiliary trays, enter the printer menu and set the media weight for the trays.

a. Press MENU repeatedly until

MEDIA MENU appears on the display.

b. Press ITEM + repeatedly until

you see TRAY2 MEDIAWEIGHT on the display.

c. Press VALUE + or VALUE -

repeatedly until the desired setting appears on the second line of the display.

d. Press SELECT to engage the

new setting.

e. If you installed two trays, go

back to step b and repeat the process for TRAY3 MEDIAWEIGHT.

f. Press ON LINE to exit the

menu.

PHASE 3:ACTIVATE THE

UXILIARY TRAYS IN THE

PRINTER DRIVER

Windows® PCL Driver

1. Click Start — Settings —

Printers

opens.

2. Right click the OKI C9300 or C9500 PCL printer icon, then click

Printing Preferences (Windows

2000), or XP, NT, Me, 98, 95).

3. Click the

4. At number of trays installed (Tray1 + auxiliary trays), then click

5. Click dialog box.

Windows PostScript® Driver

1. Click Start — Settings —

Printers

opens.

2. Right click the OKI C9300 or C9500 PostScript printer icon, then click

3. Click the (Windows XP, 2000 and NT 4.0) or the Me, 98, 95).

4. Under

Available Tray or (Additional Trays

auxiliary trays installed.

5. Click dialog box.

Macintosh® Driver (OSX)

1. As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection is unavailable.

Macintosh® PostScript Driver

1. Activate Chooser from the Apple menu.

2. Select

3. Click

4. Click

. The Printers dialog box

Properties (Windows

Device Options tab.

Available Tray, set the total

OK.

OK, then close the Printers

. The Printers dialog box

Properties.

Device Settings tab

Device Options tab (Windows

Installable Options, click

) and select the number of

OK, then close the Printers

LaserWriter 8.

Printer — Setup.

Configure.

5. Change the to match the number of auxiliary trays installed.

6. Click

7. Close

Available Tray setting

OK twice.

Chooser.