Ohsung Electronics URCMFS8 User Manual

Order Number : GETEC-C1-10-182 FCC Part 15 subpart B
Test Report Number : GETEC-E3-10-094 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: Switching Hub

FCC ID.: OZ5URCMFS8

MFS-8 Network Switch

Installation Manual

MFS-8 Installation Manual ©2010 URC,Inc.

The information in this manual is copyright protected.No part of this man­ual may be copied or reproduced in any form without prior written consent
from Universal Remote Control,Inc.

UNIVERSAL REMOTE CONTROL,INC.SHALL NOT BE LIABLE FOR OPER­ATIONAL,TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN
THIS MANUAL.

The information in this manual may be subject to change without pri­ornotice.

All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

TABLE OF CONTENTS

Introduction 1
Features and Benefits 1
Parts Guide 1
Front and Rear Panel Descriptions 2
MFS-8 Installation Considerations 4
MFS-8 Installed in a Small System 5
MFS-8 Installed in a Large System 6
MFS-8 Installed in the area with

the Network Distribution 7
Frequently Asked Questions 8
Specifications 8
USA Limited Warranty Statement 9
Federal Communication Commission

Interference Statement 10
Regulatory Information to the user 11
Declaration of Conformity 12

Page 1

MFS-8 NETWORKSWITCHINSTALLATIONMANUAL

Introduction

The MFS-8 Network switch is the ideal "Plug-n-Play" solution to pro­tect network WAP's (Wireless Access Points) from multicast audio
streams.

Total Control products, like the DMS-1200 (Digital Multi-zone
Amplifier), DMS-100 (Digital Single-Zone Digital Amplifier) and the
SNP-1 (Streaming Network Player), all multicast audio streams onto
the LAN. The nature of a "multicast" will shut down all wireless
access to the network. The MFS-8 was specifically designed for use
with Total Control Systems and incorporates pre-configured MAC
filtering. MAC Filtering completely solves the issue by confining
multicast streams to the switch itself, never allowing streams to
affect network traffic in the rest of the house. Pre-configuration
means you don't have to be a Network Engineer to configure this
switch, simply plug your Total Control products into any port and
you're ready to go. "Plug-n-Play" integration produces reliable, pre
dictable network performance.

Warning: NEVER plug a WAP (Wireless Access Point) into the MFS­8, since URC multicast audio streams will shut down any brand or
model of WAP.

Features

 Eight (8) ports plus one LAN port.
 Mac filtering prevents audio streams from consuming net-
 work bandwidth.
 Activity and Status LEDs plus Connectivity indicator.
 Includes 12 volt power supply.

Parts Guide

1 - MFS-8 MAC Filtering Switch
1 - 1.5M CAT5 Ethernet Cable
1 - 12V AC Power Adapter
1 - Wall Mount Plate and Four Mounting Screws
1 - Quick Install Guide

Page 2

MFS-8 NETWORKSWITCHINSTALLATIONMANUAL

Front and Rear Panel Descriptions

Front Panel:

Power Indicator: Illuminates when the MFS-8 Power Supply is con-

nected to AC outlet.

Ethernet Network Connectivity Indicator: Illuminates when
theMFS-8 is connected to a LAN and has received an IP Address.

Power

Indicator

LAN connectivity

indicator