OEM Systems BB-21, BB-11, BB-12, BB-22 User Manual

Box Buddy

Low Voltage Mounting Rings

Pull-off alignment tool

BB-11

Add 1 Low Voltage device to a 1 gang 110 VAC Box

Box Buddy low voltage mounting rings are designed for positioning low voltage devices next to 110 VAC electrical boxes with standard NEC spacing so that the combined 110 and low voltage device(s) may be covered with one multi-gang coverplate for an elegant appearance. The Box Buddy uses a patent pending pull-off alignment tool that makes combined installation and alignment of 110 VAC and low voltage devices simple and quick.

Box Buddy low voltage mounting rings feature conduit flanges off-set by 5/8" which enable un-obtrusive use of conduit connectors (see photo bottom of page on reverse).

BB-12

Add 2 Low Voltage devices to a 1 gang 110 VAC Box

BB-21

Add 1 Low Voltage device to a 2 gang 110 VAC Box

BB-22

Add 2 Low Voltage devices to a 2 gang 110 VAC Box

OEM Systems Company, Inc.

740 Freeport Blvd., #106 Sparks, NV 89431-6168

775 355-0405 Fax 775 355-0646

www.oemsystems.com info@oemsystems.com

Product materials & specifications are subject to change / improvement

110 Box

110 box and Box Buddy with

alignment tool in place

MR-21/22

MR-31/32

Low Voltage Mounting Rings

MR-21

2 Gang 1" conduit openings

MR-22 (shown)

2 Gang 2" conduit openings

MR-31 (shown)

3 Gang 1" conduit openings

MR-32

3 Gang 2" conduit openings

MR-421

4 Gang 1" & 2" conduit openings

MR-421

MR-8

MR-CVR

Use of conduit connector will not

interfere with device mounting.

MR-1

MR-8

8 Gang 1" & 2" conduit openings