7) Do not block any ventilation openings, install in accordance with the instructions.
8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized plug. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protected the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lighting storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
14) Mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
15) The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted candles, should be placed on the apparatus.
EN
17) Attention should be drawn to the environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
WARNING: The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
The symbol indicates that dangerous voltages constituting a risk of electric shock are present within
this unit.
The symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
The symbol indicates that this product incorporates double insulation between hazardous mains
voltage and user accessible parts. When servicing use only identical replacement parts.
3
Warning
ODYS PRIME
High voltages are used in the operation
of this television receiver. Do not remove the cabinet back from
your set. Refer servicing to qualified service personnel.
EN
To prevent fire or electrical shock hazard, do not expose the
television receiver to rain or moisture
Do not drop or push objects into the television cabinetslots or
openings. Never spill any kind of liquid on the television receiver.
Do not block the ventilation holes in the back cover. Adequate
ventilation is essential to prevent failure ofelectrical components.
Caution
Do not trap the power supply cord under the television receiver.
Never
stand. You should pay special attention to children. Serious
injury may result if it should fall.
Do not place your television on an unstable cart, stand, shelf or
table. Serious injury to an individual , and damage to the
television,
may result if it should fall.
When the television receiver is not
used for an extended period of time, it
is advisable to disconnect the AC power cord from theAC
outlet.
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and can
also be dangerous.
stand on, lean on, or suddenly push the television or its
4
ODYS PRIME
Tips regarding environmental protection
At the end of its operating life, this product may not be disposed of by way of your normal
household waste. Instead it must be delivered to a collection point for recycling electrical and
electronic equipment. The icon on the product, in the operating instructions or on the
packaging, indicates this.
The materials used in manufacturing this product are recyclable, depending on their
identifying markings. By recycling this equipment, by recycling its components, or through
other procedures of re-using outdated equipment, you are making an important contribution
to protection our environment. Please ask you local municipal administration for the location
of the corresponding recycling point.
Battery Recycling
In order to ensure the environmentally friendly disposal of batteries, please do NOT dispose of
used batteries through normal household waste. Please take the batteries to your local retail
or community collection point for recycling.
The following may be an indication of a discharged battery: The device cannot be switched
on. The device switches off automatically and "Battery Empty" is shown in the display. The
device and or battery do not function properly.
EN
Support
URL: http://
See our website for the latest information on this engine, on other products by our company and on our
company itself. If you have questions or problems, please read the FAQs on our website or contact our
customer support service
Appropriate use
The device is designed for receiving and watching unencrypted and crypted DVB-T and analogue TV
channels for private use. It is exclusively meant for this purpose and must only be used for the same. This
also includes paying attention to all information contained in this operating manual, especially in the safety
instructions.Any other usage is considered to be improper and may lead to material damages and even
personal injuries. Moreover, it will result in the immediate loss of guarantee. The manufacturer does not
bear any liability for damages caused due to improper use.
www.odys.de
support@odys.de.
5
EN
ODYS PRIME
2Mounting – dismantling
2.1Stand mounting
1. Put the stand on the foot of the back
2. Mount the stand on the foot of the back with the 2 screws.
6
ODYS PRIME
Wall mounting
EN
Use the four thread on the back to connect the tv with your wall retainer.
-VESA 100 standard-
7
EN
ODYS PRIME
3Front and Rear Panel Illustration
3.1Front panel and Keyboard
123 45
MENU CH CHVOL VOL+ SOURCE POWER
LED indicator IR Ontvangstraampje (vrij houden)
1: Remote control sensor.
2: Indicator LED:
GREEN = POWER ON
RED= STAND-BY
1Source
Display the input source menu.
2MENU
Display main MENU.
3CH+/CH-
In TV mode press CH+ or CHto change the channel up and
down.
In MENU, press CH+ or CH-to
select items.
4VOL+/VOL-
Adjust sound level.
In MENU, adjust the item that
you selected.
5POWER(STANDBY)
8
Rear connection board
ODYS PRIME
EN
1. 12V DC Power In
2. USB Port
3. HMDI Port
4. VGA Port
5. PC Audio In
6. Scart Port
7. Earphone Out
8. Coaxial out
9. Mini YpbPr Video In
10. Mini AV (Video+Audio) in
11. TV antenna input (ATV-DVBT)
9
EN
3.2Remote Control
1
3
6
7
10
12
13
15
17
18
19
20
23
24
27
28
31
32
35
ODYS PRIME
1.POWER: to switch the set device to on or standby.
2.SOURCE: Select input source.
3.NUMBER KEYS: to select channel numbers
2
5
4
9
8
11
14
16
22
21
26
25
30
29
34
33
4.LIST: Open the program list
5.: Switch to the last viewed channel
6.EPG: To display information about the program being
viewed and what’s on next.
7.RECORD: Start to record.(Only in DVB-T Mode).
8.TV/RADIO: It is used to switch between digital TV channels
and radio stations.
9.FAV: Used to access your favorite channels.
10.VOL+: Increase the volume level.
11.CH+: Used to changing the channels upwards
12.MUTE: to disable or enable the sound output.
13.VOL-: Decrease the volume level.
14.CH-: Used to changing the channels downwards.
15.EXIT: Used to return to the previous screen or menu.
16.MENU: Open the system setup
17.OK: Used to confirm a selection within a menu.
18.ARROW KEYS: Move within the menus.
19.SLEEP: Set timer to turn off the TV.
20.PICTURE: To switch picture mode.
21.SOUND: to switch sound mode.
22.DISPLAY: Used to display information about the channel
being viewed or further information about the program.
23.ASPECT: to switch the aspect ration
24.PLAY/PAUSE: Press to start playing MEDIA, or to pause
playing.
25.STOP: Stop playing Media.
26.Rec.list: Display the record list
27.TXT/Repeat: to open/close teletext OSD display if teletext
available in the broadcasted stream. / To change the repeat
mode in media playback mode
28.HOLD: HOLD teletext page
29.SUBTITLE: Used to switch among different subtitles
30.AUDIO/NICAM/A2: to switch the soundtrack /Change
NICAM Mode
31./ SUBPAGE: Fast rewind / teletext subpage
32.: Fast forward
33./SIZE: go to the last file/ Change teletext page size
34./REVEAL: go to the next file / Reveal teletext page
35.Teletext functions in TV mode.
10
ODYS PRIME
Installing Batteries
Installing Batteries
1. Open the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don’t mix different types or used batteries with new ones.
3. Close the cover.
Notes on batteries
If the remote control is not used for a long period of time, please remove the battery from the
compartment.
Do not heat batteries or dispose of them in fires.
Do not dismantle, deform or modify batteries.
- The remote control should be operated within 30 feet(7m) and 300 to the left and right of the
IR receive at the front of the TV.
- Used batteries should be disposed properly.
EN
11
EN
ODYS PRIME
4System Connections
Do not connect the power cord until all other connections have been made.
Note:
Select the correct input source with the SOURCE button. The unit does not
switch automatically into the appropriate mode.
12
ODYS PRIME
4.1
The ODYS-PRIME has an USB Port to upgrade the software and playing media files.
Press SOURCE then direction buttons to select USB mode, then press the OK button to
confirm.
Connecting a USB Devices for playing media files
If possible, please connect USB devices directly to the Devices USB interface.
If this is not possible, use only USB extension cables not exceeding 25 cm.
EN
Please make sure that the USB device is plugged in the slot. There are three type media
item can be selected, such as photo, music and Movie. Select the type media item by
pressing
, press OK button to enter the media file selection menu.
13
EN
ODYS PRIME
Select the media file by pressing ŻŹ orŸź, then the preview frame will pop up.
Press the button Ź(play) to play the media file in full screen.
When the media file (photo, music, Movie) is playing, press the OK or Info button can display the control
bar.
Press ŻŹ to select the function icon, press OK button to confirm the function. Press źor EXIT button to
exit the control bar.
NOTE: You can adjust the audio track, or program in the Info menu while Playing the video file. Choose
the Info icon and press OK can display the Info MENU.
14
ODYS PRIME
4.2Connecting to PC
The unit can be connected to PC (personal computer) via the VGA cable.
Follow the figure below to connect:
1.Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect
the other end to the PC.
2.Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and
connect the other end to the PC audio output jack.
3.Power on the TV set and switch to PC mode (VGA) using the SOURCE key.
4.Power on the PC.
5.Set the PC video resolution to match that of the television.
NOTE: It is very important to follow this steps exactly!
EN
15
EN
ODYS PRIME
4.3Connecting to TV-Signal Input
Connect the TV signal cable (the antenna cable, for example) to the Antenna Input Jack on the back of the
unit so that you can receive television programmes.
After connection, turn on the power of the unit. Then press the SOURCE button to select TV or DTV mode
and conduct program selection.
Note
Whether and how many DVB-T channels can be received by this device, is strongly depending
on the operational place, and the DVB-T signal strength in this Area.
DVB-T radio in particular is very limited and not available in most locations
Please note that for using of DVB-T after each larger local changes, a new channel search
should be accomplished. Since the frequency of the Channels may Vary from region to region.
16
Loading...
+ 38 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.