Odys PDV - 57010D User Manual

Download

Page 1

PDV - 57010D (DE)

PDV - 57010D (GB)

PDV - 57010D (FR) PDV - 57010D (ES)

PDV - 57010D (IT)

PDV - 57010D (NL)

PDV - 57010D (PT)

BENUTZERHANDBUCH USER MANUEL MANUAL DEL USUARIO MANUALE GEBRUIKSHANDLEIDING MANUAL

http://www.odys.net

MANUAL

D’UTILISATION

PER L'UTENTE

DE INSTRUÇÕES

GB FR ES IT NL PT DE

Page 2

Table of contents

1 Safety instructions ..................................................3

2 Product properties ..................................................7

3 Controls....................................................................9

4 Remote control ......................................................13

5 Connecting the DVD player..................................17

5.1 Connecting to a television set..................................................17

5.2 Connecting to an amplifier.......................................................18

5.3 Connecting to an external A/V source......................................19

5.4 Connecting headphones..........................................................20

5.5 Power supply unit....................................................................20

5.6 Car adapter.............................................................................21

6 Rechargeable battery pack...................................22

6.1 Connecting the rechargeable battery pack...............................23

6.2 Charging the battery pack........................................................23

6.3 Removing the rechargeable battery pack.................................24

7 Disc information ....................................................25

7.1 Compatible disc formats..........................................................25

7.2 Using discs..............................................................................26

8 Playback operation................................................27

9 System settings.....................................................44

10 Glossary .................................................................57

11 Trouble-shooting...................................................59

12 Specifications ........................................................61

Page 3

Page 4

1 Safety instructions

Thank you for choosing our product. Please read this manual carefully and observe all safety and operating instruc tions. St ore the manual in a safe place for later reference.

Caution

• Please note that the device may not be used while the vehicle is

in motion. It may only be used when the vehicle is parked!

• When operating the device in a vehi cle , make sur e tha t it does not inhibit the driver's forward or rear view and that it does not interfere with the safe operation of the vehicle. Otherwise injuries or accidents may result. The driver must not operate the device or look at the screen while driving.

• Never expose the device to rain, moisture or humidity. Malfunctions, damage and electric shocks can occur as a result.

• Do not open the casing of the device under any cir cu m stan ce s, and do not attempt to repair or modify the device. Do not use the mains cable for other devices. Malfunctions, damage, electric shocks and fires can occur as a result.

• Do not place the device near the airbag in the vehi cle , thus avoi ding functional disorders. When the airbag deploys, the device or accessories may be flung through the vehi cle and thu s can caus e injuries and accidents.

• The device must not overheat. Malfunctions, damage, smoke and fires can occur as a result .

• When connecting the device to other electric devices, always follow the manufacturer's instruc tion s . Adhe re t o the ter minal conn ex ion diagram to avoid damage, and connect the power plug last. Make sure that no cables are laying loosely and that cable ends with bare wires do not touch any metal objects.

• Replace the rechargeable lithium batteries only with batteries of the same or a similar type. If the wrong type of rechargeable batteries is used, there is a risk of explosion.

• Place the device in a secure spot where it cannot shift or fall. If used in a vehicle, the device must be securely fastened to avoid injuries or accidents resulting from the de vice s hif ting or fallin g down.

Page 5

• The device is a class 1 laser product. The corresponding label is loca- ted on the rear side of the device. When the housing has been opened and the lock is not engaged, visible laser radiation can escape. Avoid looking into the laser beam by all means.

• During a thunderstorm, disconnect the device from the mains. Do not use the device during a thunderstorm. Malfunctions, damage and electric shoc ks can occu r as a resu lt.

• Do not use the device if there is visible damage to it. Accidents, fires and electric shocks can occur as a result . Im medi ate ly con ta ct the seller from whom you bought the device.

• Do not open the device. The device does not contain any parts that can be serviced by the user. In case of malfunctions or damage, maintenance or repair work may be required. All maintenance and repair should be conducted by quali fi ed ser vi ce technicians only.

• Install the cables so that they do not presen t an obsta cle to operati ng the vehicle or to getting into or out of the vehicle. Make sure that no cables can accidentally wrap around the steering wheel, the pedals or any passenger's feet. Tie the cabl es toge the r.

• If operating the device inside a vehicle, do not set the volume level too high so that you are still able to hear sounds occurring on the inside and outside of your vehicle. Otherwise accidents can occur.

• Make sure that the cables are not damaged, stretched or twisted and that no short circuits occur. This could lead to electric shocks and fires. Install the cables in such a way that they do not come in contact with any movable parts. Do not install any cables near heaters and do not place any heavy objects on them.

• Make sure that no objects or fluids can penetrate into the device though openings or venting slots . This could lead to short circuits, damage, electric shocks and fires. Do not place any objects that contain liquids, such as vases, on top of the device.

Page 6

Note

• The mains voltage must correspond to the operating voltage of the device indicated on the device housing. If you are not sure what the mains voltage is, please find out from your local electric power company.

• Ensure adequate air circulation around the device. Do not place the device on soft furniture, carpets or other materials while in operation, as this may restrict the air from properly circulating around the device. Shelves and cupboards are also not suitable locations for operating the device.

• Use only accessories specified or su pplied by the device manufacturer. This also applies to any attachments and fasteners.

• Before connecting electrical devices to the DVD player, you must make sure that the device you want to connect as well as the DVD player are turned off and disconnected from the mains.

• Connect the device only to mains sockets that are properly earthed (protective earth).

• Do not use any discs that are burred, scratched, bent or broken, that are damaged or deformed in any other way or that are of poor quality.

• Do not play any discs of a wrong format. For example, if you assign the exten si o n “.cda” to a fi l e that does not, in fact, have this for mat, a very loud sound may be played that can dama ge speakers.

• Do not touch the TFT LCD screen with your bare hand.

• Do not place any heavy objects on top of the device. Otherwise

malfunctions or damage may result.

• Do not expose the remote control to direct sunlight. This may cause malfunctions or the batteries to leak.

• When cleaning the device, do not use any vola tile sub stan ce s, su ch as solvents, to avoid damaging the surface. Clean the device only using a soft, dry cloth.

• Keep the device in a clean, dry location where it is not exposed to direct sunlight.

• Disconnect the power plug from the socket when you do not use the device for an extended period of time.

• Remove the batteries from the remote control when you do not use the device for an extended period of time.

Page 7

Note

DVD players and discs are coded by region. Your DVD player will only play back discs whose regio n co de ma tch e s that o f th e player . The region code of your DVD player is 0 (code-free).

Note on copyrights

This device is equipped with technology for the protection of copyrights that is protected by patents in the United States of America and by other laws regarding the protection of intellectual property. Use of this copyright protection technology must be approved by Macrovision. This approval is granted exclusively for personal use and other limited visual presentations, unless Macrovision has expressly permitted a more extensive use. Reverse engineering and disassembly are forbidden.

Page 8

2 Product properties

• Excellent sound quality: Dolby Digital technology ensures outstan-

ding sound.

• AV In: Input for external audio and video signals. Can be connec-

ted to a variety of external AV sources. AV Out: Analogue audio/video output.

Playable formats: DVD, CD, Picture CD, MP3 and DivX

•

• On-screen menu in English, French, Spanish, German, Dutch,

Portuguese and Italian.

• Special playback functions: Multiple forward and rewind speeds.

• Search for a point in time during playback by entering the timecode

information.

• Remember the last playback position and resume playback when turned on without opening the disc cover.

• Special functions: Multipl e dis play formats and cam era perspec-

tives, zoom in/zoom out, multili ngual s ubti t l es High resolution: More than 500 lines of horizontal resolut i on with

•

MPEG-2.

• Parental control: Blocki ng of cert ain sc enes or ent ire discs.

Switchable power supply unit: Automatic adj ustment to diff erent

•

voltages in different countries. Docking terminal: The device is equipped with a docking terminal

•

on its bottom side for connexion to a docking station. This allows you to easily connect the device to a variety of peripheral devices with minimal space requirements.

Page 9

Accessories

1 x remote control 1 x battery for remote control 1 x operating manual 1 x mains cable with power supply unit 1 x audio/video cable 1 x rechargeable battery pack 1 x car adapter 1 x carrying bag

Note on copyrights

Accessories and their corresponding part numbers are subject to change without notice due to technological progress.

Page 10

3 Controls

Front view

1. TFT LCD screen

2. Loudspeaker

3. +/– button

To change the selection level

4. MODE button

To change the display format, brightness, contrast, colour

Page 11

5. ZOOM button

6. SETUP button

To display the DVD settings

7. TITLE button

To display the title menu of the disc

8. MENU button

To display the disc menu

9. /, / button

/: To select menu objects

/: fast forward/rewind during playback

10. /, / button

/: To select menu objects

/: Jump to next/previous chapter

11. OK button

12. Stop button 

13. Playback/Pause button

14. A-B loop button

15. Display for charge state of rechargeable battery

16. Power supply indicat or lam p

17. Sensor for remote control

18. Disc cover

19. Button for opening th e dis c co ver

Page 12

Right view

1. Volume controller

2. Headphone jack

3. Audio In/Out and for optic al di gital o ut put jac k

4. Video In/Out jack

5. DVD/AV IN switch

6. Power suppl y jack (9. 5 V DC)

Left view

1. Power on/off swi tc h

Page 13

Bottom view

1. Connection for rechargeable battery

2. Docking terminal

The device is equipped with a docking terminal on its bottom side for connexion to a docking station. This allows you to easily connect the device to a variety of peripheral devices with minimal space requirements. When you connect your portable DVD player to a docking station, it turns into a full-fledged desktop device.

Page 14

4 Remote control

1. On/Off button (PWR)

2. INFO button

Displays or hides detailed information about the disc in the device.

3. TITLE button

Shows the title menu if the disc contains subtitles.

4. Direction buttons

Used in the selection of menu objects

5. ENTER button

Activates the selection

Page 15

6. SETUP button

Shows the menu for the DVD player settings.

7. Numeric al b utt o ns (0 -9 )

To select the corresponding number

8.  button

To jump to the beginning of the current track or chapter or, if pressed twice, to the beginning of the previous track or chapter.

9.  button

To jump to the beginning of the next track or chapter

10. SUBT button

To select a language for subtitles (if available on disc) or turn off the subtitles

11. ANGL E button

To select different camera perspectives (if available on disc)

12. A-B button

Enables you to re pea t playback of the sect i on betwee n po i nt s A and B. Press this button once to set point A. Press the button a second time to set point B. P re s s thi s bu tt on dur ing lo op ed pl ayba c k to ex it the lo op mode .

13. ZOOM button

To cycle through the zoom levels. Use the direction buttons () to shift the picture whil e zoom ing .

14. REP button

To repeat a chapter, track, title or the entire disc.

15. MENU button

While in playback mode, to display the menu of the DVD currently inse rted in the player on the screen.

16. PAUSE button

To pause playback . Press th e PLA Y button to resum e pl a yback . Pressing the PAUSE button twice stops playback.

17. STOP button

Press this button once to pa use pla yba ck. When you press PLAY, playback will resume. Press this button twice to stop playback.

18. PLAY button

To star t playback:

19. GOTO button

Enables you to select a position (time, track or title) at which to start playback.

Page 16

20. +10 button

Enables you to enter a num be r hi gh er t han 9 by subs eq uen tl y pres sin g the desired single digi t.

21.  button

Activates fast forward during playback.

22.  button

Activates fast rewi nd du ring pla yba ck .

23. SLOW button

Activates playback in slow motion.

24. AUDIO button

Enables you to select a different playback language (if available on disc).

Inserting the battery (remote control)

Place the remote control on a plain surface and insert the battery as described below:

Pull out the battery compartment in the

direction of the arrow.

Insert the new battery (with plus side up).

Push the battery compartment back into the

remote control.

Use only batteries of the type CR2025 with a voltage of 3V. Under normal conditions (room temperature), a batt ery l ast for about one year.

Page 17

Using the remote control

• Aim the remote control straight at the sensor of the player. The distance to the player should not be greater than 5m, and the angle should not exceed 60°.

• The inappropriate use of the battery can lead to overheating, explosion, fire and injuries. Leaking batteries can damage the remote control.

• Do not expose the remote control to direct sunlight.

• The battery must not be recharged, deformed, disassembled or

overheated.

• Do not throw the battery into water or fire.

• Replace discharged batteries immediately.

Page 18

5 Connecting the DVD player

• The DVD player, the television set and any other electric devices to be connected to the DVD player mus t be switched off and disconnected from the mains.

• Observe the colour coding when connecting audio and video cables.

5.1 Connecting to a television set

Audio/video connectors Using the audio/video cables, connect the DVD player t o the A/V inputs

of the television set as shown in the illustration below.

Page 19

5.2 Connecting to an amplifier

Prior to connecting the DVD player to an external audio device, read the operating instructions f or the respect i ve devi ce. Connect the DVD player to the A/V amplifier as shown in the illustration below.

Page 20

5.3 Connecting to an external A/V source

Using the audio/video cables, connect the DVD player t o the A/V signal source (for example, DVD or video recorder) as shown in the illustration below. Then set the DVD/AV IN switch to AV IN.

Note

When external audio signals are received during DVD playback, this can lead to disturbing noise in the lo udsp eakers. If this is the case, disconnect the audio cable.

Page 21

5.4 Connecting headphones

Connect the headphones to the headphone jack on the right side of the device. The loudspeakers are automatically deact i vat ed.

5.5 Power supply unit

The DVD player is delivered with a power supply unit. Connect the power supply unit as described below:

Connect the power supply cable to the DC 9.5V IN jack on the right side of the device as shown below.

Connect the power plug to an earthed socket. The power supply indicator lamp lights up red.

Note

1. Turn off the DVD player before you unplug the mains cable from the socket.

2. When the DVD player operates on mains power, the LCD screen lights up brighter than when it operates on battery power.

Page 22

5.6 Car adapter

Use the supplied car adapter to operate the DVD player in a vehicle. Connect the adapter cable as shown below to the mains terminal of the

DVD player and the cigarette lighter of the vehicl e.

Note

1. The driver must not operate the device or look at the screen while

driving.

2. Position the device in a way that ensures an uninhibited view.

3. Remove the rechargeable battery pack before connecting the

device using the car adapter.

4. If possible, disconnect the car adapter cable while starting the

vehicle.

Page 23

6 Rechargeable battery pack

A rechargeable lithium ion battery is incl uded in the scope of deli very of your portable DVD player. This battery is connect ed on the rear side of the device. Fully charge the battery before you use the device for the first time. Normally it takes about five hours for the battery to be charged. When the rechargeable battery is fully charged, you can operate the device with it for about three hours. However, the actual operating time also depends on the disc you use. Fully charge the battery when it will not be used for an extended period of time.

Notes on using rechargeable batteries:

¾ When using a new recha rge able battery, full y charg e it pri or to use . ¾ Use rechargeable batteries only in temperatures between 0°C and

40°C.

¾ Do not throw the battery into water or fire. ¾ Do not expose recharg ea bl e batt eri es t o high tem pe rat ur es or di re ct

sunlight.

¾ Ensure adequate air circ ulation around the device. Do not place the

device on soft furniture, carpets or other materials while in operation, as this may restrict the air from properly circulating around the device.

¾ Do not short-circuit the contacts of a rechargeable battery. ¾ Do not disassemble the rechargeable battery. ¾ Remove the battery pack when it is fully charged. While the battery is

being charged, the battery status indicator lamp lights up red; when the battery is fully charged, the l amp lights up green.

¾ Remove the rechargeable battery pack when it is not used. ¾ When the state of charge reaches a low level, the

displayed on the LCD screen. About five minutes later the DVD player turns off automatically.

symbol is

Caution

Do not touch the battery's terminals with any metal objects. This would cause the battery to go to standby mode. Connect the DVD player with the battery connected to a voltage s upply sou rc e to exit the standby mode.

Page 24

6.1 Connecting the rechargeable battery pack

Connect the rechargeable battery pack as described below:

1. Place the DVD player with the bottom side up on a plain, clean surface.

2. Hold on to the device with one hand. Position the battery's plastic pins so that they are aligned with the matching notches on the DVD player, and push the battery inside the device until it audibly locks into place.

6.2 Charging the battery pack

Charge the rechargeable battery as descri bed below:

1. Connect the battery to the DVD player.

2. Connect the power supply unit that is supplied with the device to the DC 9.5V IN power jack on the right side of the device.

3. Connect the power plug to an earthed socket as shown in the illustration below.

Page 25

6.3 Removing the rechargeable battery pack

Fully charge the battery and remove it from the device when it will not be used for an extended period of time. Even a device that is turned off uses small amounts of electricit y in standby mode which ultimately discharges the battery.

Turn off the DVD player before you remove the rechargeable batt ery as described below:

1. Push the battery's locking mechanism forward with one hand and, using the other hand, pull out the bat tery as shown in the illustration below.

2. Store the battery in a suitable location when it will not be used for an extended period of time.

Note

Remove the rechargeable battery when you use the car adapter for power supply.

Page 26

7 Disc information

7.1 Compatible disc formats

DVD

DISC LOGO Diameter

12 cm

8 cm

Running time/sides/

layers

133 min (SS-SL) 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL)

41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL)

150 min (DS-DL)

MP3

JPEG

12 cm

8 cm

12 cm

74 min

20 min

600 min

DivX

12 cm

The discs' mode of operation depends on the manufacturer. Observe the corresponding notes for the respective dis c.

Page 27

Fingerprints and other contaminations can reduce

the quality of the sound and the video. Use a soft,

clean cloth for cleaning that can be moistened with

a neutral, diluted cleaning agent if the disc is very

7.2 Using discs

Handling

When inserting or removing a disc, do not touch the surface (see illustration).

Cleaning

contaminated. Do not wipe in circular motion (risk of static

noises); instead, always wipe from the centre of the disc toward the outer edge (see illustration).

CAREFULLY READ THE FOLLOWING INSTRUCTIONS BEFORE TURNING ON THE DVD PLAYER FOR THE FIRST TIME .

Caution

Do not use low-quality discs to avoid damaging the lens.

Page 28

8 Playback operation

Getting started

1. Connect the device to a mains socket using the power supply unit that

is delivered with the device.

2. Pus the POWER ON/OFF switch on the left side of the device to the

ON position. The device's power supply indicator lamp lights up green, and a welcome screen is displayed.

3. Press the OPEN butto n, insert a disc with th e printed side facing up,

and close the disc cover (see illustr ation).

4. The DVD player automatically starts with the playback.

5. Adjust the vol ume to the desired level using the VOLUME contro ller on

the r ight si de.

6. Press the PWR button on the remote control. The DVD player switches

to standby mode and the power supply indicator lamp lights up red.

Page 29

General buttons

MODE button

ZOOM button

To change brightness, contrast or colour. Adjust the values using the + and – buttons. If you hold down the button for 1-2 s, the aspect ration toggles between 16:9 and 4:3 (see illustration).

For DVDs the image size is successively changed to the following values compared to the normal size: 2x, 3x, 4x, 1/2, 1/3, 1/4. For JPEG discs, first press the ZOOM button; this allows you to successivel y inc rease the image size to 125 %, 150 % and 200 % using the  button or to successively decreas e the image size to 75 % and 50 % using the  button. This function is not available for CDs.

A-B button

Enables you to repeat playback of the section bet ween points A and B multiple times while a disc is playing. Press this butto n once to set point A. Press the button a second time to set point B and start the looped playback. When you press this button during looped playback, you exit the loop mode. This function is not available for JPEG discs.

Page 30

DVD playback

Start playback

PAUSE /

STOP /  Press this button once (during playback) to stop

Press this button once (during playback) to pause

Insert a disc. The DVD player automatically starts with the playback. In the initial menu, s elect the desired option using the  buttons. Then press ENTER on the remote control or OK on the DVD player.

playback. Press this button a second time to resume playback.

playback; to resume from the same position, press

(PLAY on the remote control).

Press this button a second time to end playing back the disc altogether.

MENU Press this button once (during playback) to display

the menu on the screen. Press this button a second time to resume playback. In menu mode, select the desired option using the  buttons (0-9 on the remote control). Then press OK on the DVD player or ENTER on the remote control.

 button Press this button once to jump to the beginning of

the current track or chapter. Press this button a second time to jump to the beginning of the previous track or chapter.

Page 31

 button To jump to the beginning of the next track or

chapter.

 button Press this button once to fast-forward.

Pressing this button repeatedly will increase the forward speed successi vel y to

and then reset it to normal speed .

2x, 4x, 8x, 16x, 32x

 button Press this button once to rewind.

Pressing this button repeatedly will increase the rewind speed successivel y to

and then reset it to normal speed .

2x, 4x, 8x, 16x, 32x

INFO button Press this button once to display detailed informa-

tion about the disc in the player. Press this button repeatedly t o cycle through the following information:

Single Ela psed Track */ N T ime Single Remain Track */N Time Total Remain Track */N Ti me

Total Elapsed Track */N Ti me

Display Off

AUDIO button During playback the available audio st ream s are

enabled successively (DVDs can contain up to eight audio streams; e. g., for multiple languages).

SUBT button During playback, allows you to select a language

for subtitles or to turn subtitles on/off. DVDs can contain up to 32 subtitle tracks. By pressing this button repeatedly, you call up the following settings:

SUBTITLE 1/N: Subtitle 1 is displayed. SUBTITLE 2/N: Subtitle 2 is displayed. SUBTITLE */N: Subtitle * is displayed. SUBTITLE OFF: No subtitles.

N represents the total number of subtit l e tracks included.

Page 32

Note

This function is only available for DVDs that contain multiple subtitle tracks.

REP button To repeat a chapter, a title or the entire disc. GOTO button

Enables you to select a position (tim e, track or title) at which to start playback.

Move the light yellow bar to the desired option using the  buttons. Confirm with E NTER (remote control) or

(DVD player).

¾ Title: To select a specific title: Using the

numeric keys (0-9), you can change the first digit directly.

¾ Chapter: To select a specific chapter: Using

the numeric keys (0-9), you can change the first digit directly.

¾ Audio: To select an audio option (e. g., Dolby

Digital).

¾ Subtitle: To activate/deactivate the subtitles

(on/off).

¾ Angle: To set the camera angle. ¾ Total Time: Entering a title time using the

numeric keys (0-9).

¾ Chapter Time: Entering a chapter time using

the numeric ke ys (0-9) .

¾ Repeat: To repeat a chapter, a title or the

entire disc.

Page 33

¾ Time Display: To display the elapsed/

remaining time of a chapter or title.

Press the GOTO button again to resume normal playback.

SLOW button When you press this button, the playback speed is

successivel y reduc ed to

normal forward speed and then reverses

1/2, 1/4, 1/8 and 1/16 of the

. To resume playback at the normal speed, press PLAY on the remote control or

on the DVD

player.

ANGLE button Pressing this button cycles through the camera

perspectives availabl e for the part icul a r sc ene (see illustration).

This function is only available for DVDs that contain recordings of multiple camera perspec tives.

TITLE button The content of a DVD is often divided into several

titles that contain multiple menus. If you press the TITLE button during playback, the

title menu is displayed. Using the  buttons (or 0-9 on the remote control), you can select the desired title or the desired option. Confirm with ENTER.

Page 34

CD playback

PAUSE /

STOP /  Press this button once (during playback) to stop

 button Press this button once to fast-forward.

Press this button once (during playback) to pause

playback. Press this button a second time to resume playback.

playback; to resume from the same position, press

(PLAY on the remote control).

Press this button a second time to end playing back the disc altogether.

Pressing this button repeatedly will increase the forward speed successi vel y to

and then reset it to normal speed .

2x, 4x, 8x, 16x, 32x

 button Press this button once to rewind.

Pressing this button repeatedly will increase the rewind speed successivel y to

and then reset it to normal speed .

REP button To repeat a track or all tracks in sequence.  button Press this button once to jump to the beginning of

the current track or chapter. Press this button a second time to jump to the beginning of the previous track or chapter.

 button To jump to the beginning of the next track or

chapter.

2x, 4x, 8x, 16x, 32x

Page 35

GOTO button Enables you to select a position (time or track) at

which to start playback. During CD playback the following options are displayed successively:

Disc Go To:--:-- Track Go To:--:-- Select Track:--/N

(N is the number of tracks on the disc) You can select the desired option directly using the buttons 0-9 on the remote control.

INFO button Press this button onc e to display detailed informa-

tion about the disc in the player. Press this button repeatedly t o cycle through the following information:

Note

* represents the number of the track played. N represents the number of tracks on the disc.

AUDIO button To cycle through the following sound effects:

Mono Left Mono Right Mix-Mono Stereo

Hold down the button for about 2 s to close the display window.

Page 36

MP3 playback

1. Insert an MP3 disc. The DVD player automatically starts with the playback.

2. The root folder and various subfolders are displayed. Select a folder using the  buttons on the remote control. Confirm your selection using one of the following buttons: , ENTER, PLAY on the remote control, or

3. The screen switches to display the selec ted sub fol der. Select a file using the  buttons on the remote control. Confirm your selection using one of the following buttons: ENTER on the remote control, or

on the remote control or the DVD player.

4. Press the button to return to the previous folder. You ca n also mo ve the light yellow bar to the

of the following buttons: ENTER on the remote control, or DVD player.

, OK on the DVD player.

icon. Confirm your selection using one

on the

PAUSE / Press this button once (during playback) to pause

playback. Press this button a second time to resume playback.

STOP /  Press this button once (during playback) to stop

playback; to resume from the same position, press

(PLAY on the remote control). Press this button a second time to end playing back the disc altogether.

 button Press this button once to fast-forward.

Pressing this button repeatedly will increase the forward speed successi vel y to

and then reset it to normal speed .

2x, 4x, 8x, 16x, 32x

Page 37

 button Press this button once to rewind.

Pressing this button repeatedly will increase the rewind speed successivel y to

and then reset it to normal speed .

2x, 4x, 8x, 16x, 32x

 button To jump to the previous page.  button To jump to the next page.

INFO button Press this button once to display detailed informa-

tion about the disc in the player. Press this button a second time to close the display window. This function is only available in folder mode.

REP button Press this button once to play back the content of

a file/folder in loop mode. Press this button repeatedly t o cycle through the following options:

Shuffle Random Single Repeat One

Repeat Folder Shuffle: Repeatedly plays back the fi l es of the current folder in a random order. Random: Plays back the files of the current folder in a random order. When all files have been played, playback is stopped. Single: Plays back only the current file. Repeat One: Plays back the current file repeatedly. Repeat Folder: Repeatedly plays back all fil es of the current folder in the original order.

This function is available only in normal playback mode, and not in repeat mode.

Page 38

GOTO button During playbac k: To select the desired file or time.

In folder mode: To select the desired folder. During MP3 playback: Press this button once to

select a file using the numerical keys. During MP3 playback: Press this button a second time to specify the desired point in time at which you want to start playing back the file using the numerical keys.

Picture CD playback

1. Insert a picture CD. The DVD player automatically starts with the playback.

, OK on the DVD player.

on the remote control or the DVD player.

4. Press the button to return to the previous folder. You ca n also mo ve the light yellow bar to the

one of the following buttons: ENTER on the remote control, or the DVD player.

icon. Confirm your selection using

Note

Apart from image files, many CDs also contain other data.

Page 39

PAUSE / Press this button once (during playback) to pause

playback. Press this button a second time to resume

playback.

STOP /  During playback: To display the image files as

thumbnails. To resume normal playback, press the

button

(PLAY on the remote control).

 button To jump to the previous file.  button To jump to the next file.

INFO button Press this button once to display detailed

information about the disc in the player. Press this button a second time to close the

display window.

This function is only available in folder mode.

REP button Press this button once to play back the content

of a file/folder in loop mode. Press this button repeatedly t o cycle through the

following options:

Single Repeat One Repeat All Cancel Repeat

Shuffle Random

Shuffle: Repeatedly plays back the fi l es of the current folder in a random order.

Random: Plays back the files of the current folder in a random order. When all files have been played, playback is stopped.

Single: Plays back only the current file.

Page 40

Repeat One: Plays back the current file repeatedly. Repeat All: Repeatedly plays back all files of the

current folder in the original order. Cancel Repeat: Exits the repeat mode.

This function is available only in normal playback mode, and not in repeat mode.

MENU button During playback: To go to the root folder.

To resume normal playback, press the (PLAY on the remote control).

GOTO button During playback: To select a file using the numeri-

cal keys (0-9). Confirm your s el ection with E NTER (remote control) or OK (DVD player).

button

In folder mode: To highlight the current file with a yellow bar; use the numerical keys (0-9) to select the desired file direct l y. Confirm with ENTER (remote control) or

(DVD player).

Page 41

Rotating pictures

Your can rotate a picture that is being displayed by using the direction buttons ().

Press the  button to rotat e the current pict ure clockwise as shown below.

Press the  button to rotat e the current pict ure ant i-clockwise as shown below.

Press the  button to flip the current picture hori zont al l y as shown below.

Press the  button to fli p the current picture vert ic al l y as shown below.

Note

In some picture CDs, the functions for rotating and zooming pictures are not available due to design limitations.

Page 42

DivX playback

1. Insert a DivX CD. The DVD player automatically starts with the playback.

2. The root folder is displayed. Select a folder using the  buttons on the remote control.

3. Confirm your selection using one of t he following buttons: , ENTER, PLAY on the remo te control, or

, OK on the DVD player.

PAUSE / During playback: Press this button once (during

playback) to pause playback. Press this button a second time to resume

playback.

 button Press this button once to activate Fast Forward.

Press this button repeatedly to increase the forward speed successi vel y to

and then reset it to normal speed .

2x, 4x, 8x, 16x, 32x

 button Press this button once to activate Fast Rewind.

Press this button repeatedly to increase the rewind speed successivel y to

and then reset it to normal speed .

2x, 4x, 8x, 16x, 32x

 button To jump to the previous file.  button To jump to the next file.

MENU button During playback: To go to the root folder.

To resume normal playback, press the

button

(PLAY on the remote control).

Page 43

REP button Press this button once to play back the content of

a file/folder in loop mode. Press this button repeatedly t o cycle through the

following options:

Single Repeat One Repeat All Repeat Off

Shuffle: Repeatedly plays back the fi l es of the current folder in a random order.

Random: Plays back the files of the current folder in a random order. When all files have been played, playback is stopped.

Single: Plays back only the current file. Repeat One: Plays back the current file repeatedly. Repeat All: Repeatedly plays back all files of the

current folder in the original order.

Shuffle Random

Repeat Off: Exits the repeat mode.

This function is available only in normal playback mode, and not in repeat mode.

SLOW button When you press this button, the playback speed

is successively reduced to 1/2, 1/ 4, 1/8 and 1/16

of the normal forward speed and then reverses

To resume playback at the normal speed, press PLAY on the remote control or player.

AUDIO button Enables you to select the desired sound effect.

Hold down the button for about 2 s to close the display window.

on the DVD

Page 44

GOTO button Press this button repeatedly during playback t o

display the following:

Select:--- Go To -:--:--

INFO button Press this button to cycle through the following

information:

SUBT button To select a language for subtitles (if available on

disc) or turn off the subtitles Note: Not all discs support the functions for

subtitles, camera perspectives or audio effects.

Page 45

9 System settings

In this section, you will learn how to customize the default settings of the system according to your needs.

To change your system settings, proceed as follows:

1. Press the SETUP button on the remote control or on the DVD player.

2. The Setup menu is displayed. In this menu, you can define general settings, loudspeaker settings, Dolby Digital settings, video settings as well as other default settings. You can leave the Setup menu at any time by pressing the SETUP button again.

3. Use the  and  buttons on the remote control or on the DVD player to select the desired submenu.

4. Use the  and  buttons on the remote control or on the DVD player to select the desired option within the submenu.

Page 46

General Setup page

The illustration shows the options available in this submenu.

TV Display

To set the TV display mode.

Highlight the option using the  and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: Normal/PS, Normal/LB and Wide (default). Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Note

For TV sets with a 4:3 screen, select Normal/PS or Normal/LB; for devices with a 16:9 screen, select Wide.

Page 47

Angle Mark

To activate/deactivate the camera perspectives.

Highlight the option using the  and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: On and Off. Use the  and  buttons to highlight the desired setting and confirm with ENTER. Pre ss  to exit the option's setting.

OSD Language

To set the language for the onscreen menu.

Highlight the option using the  and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: English (default), French,

Spanish, German, Portuguese, Dutch and Italian. Use the 

and  buttons to highlight the desired setting and confirm with ENTER. Pre ss  to exit the option's setting.

Page 48

Captions

To activate/deactivate subtitles. Highlight the option using the 

and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: On and Off (default). Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Screen Saver

To activate/deactivate screen savers.

Highlight the option using the  and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: On (default) and Off. Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Page 49

Last Memory

To activate/deactivate whether the last playback positi on is saved. If this option is activated, playback is automatically resumed at the last playback position.

Highlight the option using the  and  button s . Switch to the option's setting by pressing ENTER or . Possible settin gs are: On and Off (default). Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Page 50

Speaker Setup page

The illustration shows the options available in this submenu.

Downmix

To activate the downmix mode. Highlight the option using the

 and  button s . Switch to the option's setting by pressing ENTER or . Possible settings are: Lt/Rt and Stereo (default).

Note: When Lt/Rt is selected, the audio signals are output in Dolby format, when Stereo is selected, they are output in stereo format.

Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Page 51

Dolby Digital Setup page

The illustration shows the options available in this submenu.

1. Dual Mono

To set the channel output mode. Highlight the option using the 

and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: Stereo (default), L-Mono, R-Mono and Mix-Mono.

Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Page 52

2. Dynamic

To set the linear dynamic compression rate to achieve different compression effects .

Highlight the option using the  and  button s . Switch to the option's setting by pressing ENTER or .

Use the  and  buttons to select the desired setting and confirm with ENTER. Press  to exit the option's setting.

Page 53

Video Setup page

The illustration shows the options available in this submenu.

Sharpness

To set the sharpness of an image. Highlight the option using the 

and  buttons. Switch to the option's setting by pressing ENTER or . Possible settings are: High, Medium and Low (default). Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Brightness

To set the brightness of an image.

Highlight the option using the  and  button s . Switch to the option's setting by pressing ENTER or . The default setting is 00. Use the  and  buttons to select the desired setting and confirm with ENTER.

Page 54

Contrast

To set the contrast of an image. Highlight the option using the

 and  button s . Switch to the option's setting by pressing ENTER or . The default setting is 00. Use the  and  buttons to select the desired setting and confirm with ENTER.

Preference page

TV Type

To set the TV system type (PAL, Multi, NTSC).

The illustration shows the options available in this submenu.

Page 55

Audio

To set the playback language. Highlight the option using the 

and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: English (default), French,

Spanish, Chinese, Japanese, Korean, Russian and Thai. Use

the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Subtitle

To set the subtitle language. Highlight the option using the 

and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: English, French, Spanish,

Chinese, Japanese, Korean, Russian, Thai and Off (default).

Use the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Page 56

Disc Menu

To set the language for the disc menu.

Highlight the option using the  and  buttons. Switch to the option's setting by pressi ng ENTER or . Possible settings are: English (default), French,

Spanish, Chinese, Japanese, Korean, Russian and Thai. Use

the  and  buttons to highlight the desired setting and confirm with ENTER. Press  to exit the option's setting.

Parental

To set parental controls. Depending on the disc, DVDs

can be categorized by their contents. You can use this option to block certain scenes on a disc or the entire disc. The default setting is Adult. Highlight the option using the  and  button s . Switch to the option's setting by pressing ENTER or  (see illustration). Use the  and  buttons to highlight the desired setting and confirm with ENTER. Enter a password (see Password). Press ENTER again to exit the option's setting.

Page 57

Password

The parental control feature is password-protected. You can use this option to change the password for the parental control feature. The default password is

1369. Highlight the option using the

 and  button s . Switch to the option's setting by pressing ENTER or . Enter the desired password and confirm with ENTER. Pre ss  to exit the option's setting.

Default

Use this option to reset the device settings to their defaults.

Highlight the option using the  and  button s . Switch to the option's setting by pressing ENTER or . Press ENTER again to reset the device to its default settings.

Page 58

10 Glossary

Dolby Digital

Dolby Digital is a technology developed by Dolby Laboratori e s. Audio material that has been recorded in Dolby Digit al fo rm at can be played back on up to 5.1 separate channels with excellent quality.

Letterbox image format

In this format, the image of widescreen DVDs is displayed with black bars at the top and the bottom of the screen.

Pan&Scan image format

In this format, the image of widescreen DVDs is cropped on the right and on the left.

Titles, chapters

DVDs are divided into larger sections (t itl es) and smaller sections (chapters). The sections are numbered (title number, chapter number).

Track (CD)

CDs are divided into sections, ca l led tracks. The sections are numbered (track number).

Page 59

JPEG

JPEG is a commonly used image format with small file sizes and minimal loss of quality. One disc can hold several hundred pictures that are saved in this format. To create a true digital picture album, you can create a picture CD in JPEG format. The illustration shows the fol ders and files contained on such a CD.

MP3

MP3 is a commonly used compression format for digital audio fil es that achieves a very good, CD-lik e quality.

DivX

DivX is a new method used for encoding video that is based on the MPEG-4 compression standard. This DVD player is capabl e of playing back DivX movies.

Page 60

11 Trouble-shooting

Carry out the problem-solving measures described in the following section before contacting Customer Support.

Turn off the DVD player immediately as soon as you suspect a malfunction. Unplug the power plug and check whether the DVD player is unusually warm or whether smoke is rising f rom it.

Problem Possible cause Remedy

The DVD player does not work

Disc cover not closed Close disc cover No disc inserted Insert disc Disc inserted the

wrong way Disc dirty or

deformed

Insert disc with label facing up

Clean disc, or insert other disc

No audio

Moisture on lens

Device not properly connected

Speakers not turned on

DVD sound settings incorrect

Disc dirty or deformed

Remove disc and turn off DVD player for at least two hours

Check connexions and connect device in the correct way

Turn on speakers

Check sound settings and set sound correctly

Clean disc, or insert other disc

Page 61

No video

LCD screen turned off or in wrong video mode

Device not properly connected

Turn on LCD screen and/or set correct video mode

Check connexions and connect device in the correct way

Device not in DVD mode

Set DVD/AV IN switch on the right to DVD

Poor video and/or audio quality

Remote control does not work

Disc dirty or deformed

Obstacle between remote control and

Clean disc, or insert other disc

Remove obstacle

DVD player Remote control not

pointed at DVD player

Point remote cont rol directly at DVD player

Remote control battery inserted the wrong way

Check the battery's polarity and, if necessary, insert battery correctl y

Battery too low

Insert new battery or completely discharged