All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, by any means, electronic, mechanical,
photocopying, recording, or otherwise, without written permission from O ce an Op ti cs, Inc.
This manual is sold as part of an order and subj ect to the condition that it shall not, by way of trade or other w ise, be len t, re-sold, hired out or otherwise circulated
without the prior consent of Ocea n O ptics, Inc. in any form of binding or cover other than that in which it is p ublished.
Trademarks
Microsoft, Windows, Wind ow s 95, Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP and Excel are either registered tr ademarks or
trademarks of Microsoft Corporation.
Limit of Liability
Every effort h as been made to make this manual as complete and as accurate as possible, but no warranty or fitness is implied. The information provide d is on an
“as is” basis. Ocean Optics, Inc. s ha ll ha ve ne ither liability nor responsibility to any person or entity with respect to any loss or damages arising from th e
information contained in this m a nual.
WARNING
Important Safety Notices
1. Do not remove or modify any installed safety device on this equipment. Doing so will void your
warrant y and create an unsafe operating environment.
2. Dangerous voltages are present in this device. There are NO use r serviceable part s inside.
3. Only allow qualified personnel to service this unit.
4. Do not use the unit if it is damaged in any way. Contact you r dealer for repair or replacement
information.
5. Always screw in the fiber optic c ables before startin g the instrument.
Protective eyewear must be worn when using this equipment. Intense
ultraviolet radiation is present.
Never look directly into the light beam, as this can cause eye damage.
Warranty
Ocean Optics warrants to the original user of this instrument that it sh all be free of any defects resulting
from faulty manuf ac tur e of this in s tru men t f or a peri od of 12 mon th s fr om th e orig in al dat a of shipment.
There are no warranties for the Xenon Bulb (REPAIR-HPX-1) and the Xenon -Bulb-Module (HPX-2000HP-DUV-BM).
This instrument should not be used for any Clinical or Diagnostic purposes. Data genera ted in the s e
areas is not warr ant ed in any wa y b y Ocean Optics Germany GmbH. Any defects covered by this
Warranty shall be corrected either by repair or by replacement, as determined by Ocean Optics Germany
GmbH.
There are no warranties that extend beyond the description herein.
This Warranty is in lieu of, and excludes, any and all other warranties or representations expressed,
implied, or statu tory, including merchantab ili t y and fitness, as well as any and all other oblig at ion s or
liabilities of Ocean Optics including, but not limited to, special or consequential damages. No person,
firm, or corporation is authorized to assume for Ocean Optics. Any additional oblig ation or liab i lity not
expressed provided for herein except in writing duly executed by an officer of Ocean Optics:
Contains a list of package contents and unpacking
instructions. Also contains instructions for connecting
the fiber optic cable.
Contains operating environment specifications, as
well as other physical details of the product, a parts
list, and pinout information for the15 DB-15
connector.
Provides instructions for operating the Xenon lamp
and the TTL shutter.
Contains a table of troubleshooting information.
Provides instructions for changing the bulb.
Product-Related Documentation
You can access documentat ion for Ocean Optics products by vis iting our website at
http://www.oceanoptics.com. Select Technical → Operating Instructions, then choose the appropriate
document from the availabl e drop-down lists. Or, use the Search by Model Number field at the bottom
of the web page.
You can also access operating instructions for Ocean Optics products on the Software and Technical Resources CD included with the system.
Engineering-level documentation is located on our website at Technical → Engineering Docs.
000-10000-081-02-201207b iii
About This Manual
Upgrades
Occasionally, you may find that you need Ocean Optics to make a ch ange or an upgrade to your system.
To facilitate these changes, you must first contact Customer Support and obtain a Return Merchandise
Authorization (RMA) number. Please contac t Oce an Op tics f or spe ci fic in st ru cti ons wh en returning a
product.
iv 000-10000-081-02-201207b
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.