Oasis PL14MH User Manual
HOT’N COLD ON-A-WALL
PLF8MH, PL14MH
Suggested Specification
Cabinet finish shall be Sandstone powder coated paint on
galvanized steel or brushed stainless steel. Cooling system
shall use R-134a refrigerant. Shall be listed by Underwriters’
Laboratories to U.S. and Canadian standards and conform
to European Union Directives.
Models
PLF8MH is a Hot ‘N Cold and serves 45 cups of piping hot
water per hour, plus 8 gph of chilled water.
PL14MH is a Hot ‘N Cold and serves 45 cups of piping hot
water per hour, plus 14 gph of chilled water.
Standard Features
> Waterways Are Lead-Free In Materials & Construction
> Dial-A-Drink
> Stainless Steel Top
> Welded Heavy-Gauge Steel Frame
> High-Efficiency Cooling Tank and Coil
> Refrigerant R-134a
> Limited 5-year Warranty
®
Bubbler
Finishes
> Standard Cabinet Finish: Sandstone powder coated
paint on Galvanized Steel.
> Optional finishes (at extra cost): Stainless Steel,
Regency Bronze, optional powder coated finishes.
Installation
> Prior to roughing-in consult with local, state, and federal
codes for proper mounting height.
> Shipped with complete instructions and wall mounting
bracket.
> Removable panels provide easy access for installation.
Accessories
□ Glass Fillers: Push handle (029603-004)
□ Glass Fillers: Push back (029603-005)
□ Glass Fillers: Push down (029603-006)
□ Kit 029137-002 is required for Field Installation for
the above glass fillers (Except Models PLF8MH)
Limited 5-Year Warranty (Continental limits of the United
States and Canada): Five years on the sealed refrigeration
system and most component parts. Detailed warranty
certificate enclosed with each water cooler; sample
available upon request.
Export Warranty: One year on the sealed refrigeration
system and most component parts. Detailed warranty
certificate enclosed with each drinking fountain; sample
copy available upon request.
Product Certified to NSF/ANSI Standard 61, Annex G
(weighted average lead content of <=0.25%) and is in
compliance with California's Health & Safety Code Section
116875 (commonly known as AB1953).
Models covered by this specification comply with
all known Plumbing Codes. Listed by Underwriters’
Laboratories to U.S. and Canadian standards and
conform to European Union Directives.
Components in these water coolers are lead free
as defined by the Safe Water Act Amendments of
1986, and the Lead Contamination Control Act
of 1988.
50° F Drinking Water
90° F Ambient Air Temp*
Model
Specifications subject to change without notice
*Industry Standard Rating Condition 80° F inlet water temperature. Hot ‘N Cold Model delivers 45 six-ounce of hot water per hour in addition to cold water.
**Special export models available, operable on 220-240 volts, 50/60 Hz.
Rated Capacity
GPH
14.0 7.8 Yes Yes
Base Rate
GPH
**HM41LP No Yes 79 Lbs.
Pre-Cooler Hot ’N Cold™
Model
Compr.
HP
1/5
1/5
115 Volts, 60 HZ
Full Load
Amps
9.8seYoN0.80.8
8.9 820
Rated
Watts
820
Glass Filler
Acc. Option
Cabinet
Color Finish
Net Wt.
Approx.
.sbL 77seYoN HM8FLP
Form 3984 | Rev. 06/09
Oasis International | 222 East Campus View Blvd. | Columbus, OH 43235
For Customer Service and Technical Helpline assistance call: 800.950.3226
OASIS
™
ON-A-WALL WATER COOLER MODEL PLF8MH, PL14MH
www.oasiscoolers.com
OASIS is a trademark of Oasis International
2009 Oasis International
Loading...