Oakton EcoTestr pH 2, EcoTestr TDS Low Datasheet
CATALOG
...setting the standard again and again
EcoTestr™ Starter Kit
Save time and money—kit includes
everything you need to get started
•
Order one part number and receive an
EcoTestr pH 2 tester, an EcoTestr TDS Low tester,
calibration solution, and storage solution
•
Easy to use—simply dip and read
•
Achieve accurate readings with automatic
temperature compensation built right in
•
EcoTestr pH 2 tester offers three point calibration
with auto buffer recognition for quick calibrations
•
EcoTestr TDS Low tester is easy to calibrate—
push-button single-point calibration with
self-adjusting TDS factor from 0.40 to 1.0
•
pH electrode is recessed to protect from damage
•
TDS sensor is made of rugged, chemical-resistant
stainless steel
•
Don’t worry about losing your tester—units float
if dropped in water
®
What’s included: EcoTestr pH 2 pocket tester; EcoTestr TDS Low
pocket tester; 500 mL each of pH buffers 4, 7, and 10; 500 mL of
Kit includes
everything shown!
conductivity solution 1500 µS/cm; 500 mL of electrode storage
solution; and batteries.
Specifications
Tester model
Range
Resolution
Accuracy
Temperature
compensation
Calibration
Dimensions
(W x H x D)
Operating temperature: 32 to 122°F (0 to 50°C)
Power: four 1.5 V button cell batteries (included)
Battery life: >300 hours
EcoTestr pH 2 EcoTestr TDS Low
0.0 to 14.0 pH 0 to 1990 ppm
0.1 pH 10 ppm
±0.1 pH ±1% full scale
Automatic Automatic
Up to three-point One-point
5
⁄8" x 61⁄4" x 11⁄8" (3.9 x 15.9 x 2.9 cm)
1
Ordering Information
Description Catalog number
EcoTestr pH and TDS starter kit WD-35423-15
1-888-4OAKTON (1-888-462-5866) • 1-847-549-7600 • info@4oakton.com
4160.1
Loading...