Nu-Vu PROLB-18 Specifications
Food Service Systems
NU-VU
®
Oven/Proofer
®
Project
Item
Quantity
®
NU-VU®Food Service Systems
www.nu-vu.com
5600 13th Street
Menominee, MI 49858
1-800-338-9886 Toll Free
1-906-863-4401 Phone
1-906-863-5889 Fax
PROLB-18 Floor Model Proofer
NU-VU
®
PROLB-18 Floor Model Proofer
STANDARD FEATURES:
• Stainless steel construction
• Heavy duty 3” casters
• Full view sliding glass doors
• AutoMist humidity system
OPTIONAL FEATURES:
• Warmer
• Set of 6” legs
SIZE:
PROLB-18
40-
3
/8” High, 48-1/4” Wide, 31-15/16” Deep
1021 mm High, 1226 mm Wide, 812 mm Deep
NU-VU’s PROLB-18 floor model are constructed
of stainless steel inside and out. Each of these
units features tempered glass doors for full view
of your product. These units feature the AutoMist
humidity system, which eliminates the need for a
water pan; however, it does require a
1
/4”
waterline connection. This feature utilizes a mist,
which is sprayed directly onto a fan that
distributes the heat and humidity evenly
throughout the proofer cavity.
The PROLB-18 has a capacity of 18 full size pans
or 36 half-size pans.
CONSTRUCTION:
• Welded stainless steel
• Fully insulated
• Control panel accessible through front
and side of unit
• Heating elements accessible inside of cabinet
CONTROLS:
• Mechanical controls
• Indicator light for thermostat
• Separate heat and humidity controls
LABORATORY CERTIFICATION AND APPROVAL
®
NU-VU®Food Service Systems
www.nu-vu.com
5600 13th Street
Menominee, MI 49858
1-800-338-9886 Toll Free
1-906-863-4401 Phone
1-906-863-5889 Fax
®
Food Service Systems
Approval / Stamp
PROLB-18 Floor Model Proofer
NU-VU
®
PROLB-18 Floor Model Proofer
SPECIFICATIONS:
ELECTRICAL:
SERVICE CONNECTIONS:
• Unit is shipped from factory to be hard wired on site.
Single phase uses three-wire system. Three phase
uses four-wire system.
• 208 or 240-Volt single or three phase is standard.
Please specify at time of order.
INSTALLATION:
Allow four inches on each side and back of unit for
ventilation of oven..
PACKING SIZE:
48” High, 60” Wide, 38” Deep
(1219 mm High, 1524 mm Wide, 965 mm Deep)
SHIPPING WEIGHT:
470 Pounds (213 Kg), FOB Menominee, MI 49858
DIMENSIONS:
Height Width Depth
Exterior 40-
3
/8” 48-1/4” 31-15/16”
Interior
27-
5
/8” 18-3/16” 29-1/2”
Amp Draw 208/1 208/3 240/1 240/3
L1 9685
ELECTRICAL:
CAPACITY:
18”x26” 13”x18”
Sheet Pans Sheet Pans Spacing
Proofer 18 36 3”
48
1
/
4
”
1
1
/
4
”
40
3
/
8
”
31
5
/
16
”
7
”
7
”
FRONT SIDE
WATER INLET
1/4”
COMPRESSION
FITTING
ELECTRICAL
INLET
TO WATER INLET
WATER:
A1/4” waterline connection is required. Awater filtration
system should be used to minimize mineral build-up.
LISTINGS:
The PROLB-18 has NSF & C-ETL-US listings.
Loading...