Nuvu NV25 User Manual

NUVU Airwaves Music Player Instruction

Model:NV25

NUVU

AIRWAVES

5

Power on and connect the unit

(1 ) Turn on the unit by sliding the
power switch to power on position

(2) The unit will activate Bluetooth search
automatically

(3) Select the device name “ OP-BM_001”
in your mobile phone.

(4) The power LED will flash from fast to

slow while Bluetooth connected

(5) Adjust the sound volume use volume
control button.

Keys function

cable

4

Hold the cable and release
the balloon rise slowly

3

Microphone
location

Microphone
button

1

(6) When the battery needs to be charge,
use standard micro USB cable connect
the USB socket on unit.

Release helium from Balloon
Use the provided tube, put it into balloon Helium inlet
Press down the balloon body unit flat on surface

Note:

If the sound output is slow, please check below setting
(1) The sound level in mobile phone and player volume setting
(2) Check the balloon fill up Helium is firm enough

Specification
Battery capacity: 800mAh
Battery voltage: 3.7V
Play time: 6 hours
Bluetooth range: 10M
Battery charging: Micro USB

2



This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.



This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.





