NUUO SCB-C31A POS, Metadata Plugins User Manual

Metadata Plugins

Access Control, License Plate Recognition

and Point of Sale Solutions

Hardware & Software Installation

User Manual

Ver. 99.350.B0430.001

Intelligent Surveillance Solution

Table of Contents

page-1

TABLE OF CONTENTS

TABLE OF CONTENTS .............................................................................................. 1

SYSTEM INTRODUCTION ......................................................................................... 2

Definition of Terms .......................................................................................... 2

Product Specification .................................................................................... 3

HARDWARE INSTALLATION .................................................................................... 4

SCB-C31A POS data capture convertor ..................................................... 4

SOFTWARE INSTALLATION ...................................................................................... 6

SCB-C31 POS data capture convertor ....................................................... 6

Connection via COM Port ............................................................................ 7

Connection via TCP Client ............................................................................ 7

NUUO NVR/DVR/Hybrid system installation ................................................ 7

SOFTWARE SETUP .................................................................................................... 8

1. Metadata Device Management ............................................................ 8

1.1. Insert/Delete/Configure Metadata devices ................................... 9

1.2. New/Edit/Delete/Import/Export Tag Filter ..................................... 11

1.3. Setup metadata Display Font .......................................................... 16

2. Smart Guard Detection ........................................................................... 17

2.1. Metadata Event ................................................................................. 17

2.2. Instant Action on Metadata Event ................................................. 21

3. Playback .................................................................................................... 22

4. Remote Network Service ......................................................................... 22

OPERATION TOOLS ............................................................................................... 24

1. Live Display ................................................................................................ 24

2. Log Viewer Search ................................................................................... 25

3. Metadata transaction data Search ...................................................... 27

4. Playback video with metadata data ................................................... 28

5. Backup video with metadata data ...................................................... 29

6. Remote Access ......................................................................................... 31

Intelligent Surveillance Solution

System Introduction

page-2

SYSTEM INTRODUCTION

NUUO Metadata plugins enable users to build integrated solutions with 3rd
party devices, currently including Access Control, License Plate
Recognition and Point of Sale Solutions. Please contact your local
distributor or sales service for the latest list of integrated solutions from
various suppliers.

Access Control

NUUO Main Console accepts feeds from Access Control servers via
Ethernet. You may configure several doors or entrances under each
Access Control Source. Filtered info will be displayed on chosen
channels, for example ID numbers or names of personnel upon each
entry or exit.

License Plate Recognition

NUUO Main Console also accepts feeds from License Plate Recognition
Systems via Ethernet. Several lanes may be configured under each LPR
Source. Filtered info will be displayed on chosen channels, including
license plate numbers or other additional information.

Point of Sale

NUUO POS provides a platform to display financial transaction data upon
video surveillance channels. The architecture is as below; POS
transaction data flows to NVR by Ethernet. Each Cash Register with an
external receipt printer is connected by DB9 cable. The transaction
information delivered in R232 format can be converted to Ethernet
through SCB-C31A POS data capture convertor. Alternatively, Cash
Registers that support TCP/IP or COM port output can connect directly to
the system without the SCB-C31A box.

Definition of Terms

Terms

Definition

Metadata Original Data

Original data from Metadata devices. Usually with a
lot of symbols and no line feed.

Metadata Transaction

Filtered result by user defined tag filter.

Metadata Event Log

Smart Guard Event Log from metadata transaction.
Includes transaction start, transaction end, POS cash
register open and other user defined events.
Abbreviation of Metadata Log.

Intelligent Surveillance Solution

System Introduction

page-3

To give you a better idea of the various source types supported by the
Point of Sale solution, the following sections (Hardware Installation and
Software Installation) are dedicated to POS Metadata and the hardware
POS box only. If you are not planning to install this solution, please
proceed directly to page 8 for Software Setup.

POS System Diagram

Product Specification

NUUO Capture Box

SCB-C31A POS

Input

RS232

Output

Ethernet

DC In

DC +10V to +15V

Power consumption

500 mA

Operating Temperature

-20 to 65℃

Operating Humidity

0-90 % Non-Condensing

Baud Rate

110 bps to 230.4 kbps

Data Bits

5, 6, 7 or 8

Stop Bits

1, 1.5 or 2

Parity

None, Even, Odd, Mark, Space

Flow Control

None, RTX/CTS, XON/XOFF, DTR/DSR

Intelligent Surveillance Solution

Hardware Installation

page-4

HARDWARE INSTALLATION

SCB-C31A POS data capture convertor

To connect Cash Register, Printer, and SCB-C31A POS data capture
convertor together, please follow below steps:

Step 1: Please refer the user manual to setup Cash Register and printer.

Step 2: Using a “Y-shape” DB-9 cable, one DB-9 female connect to

POS system and one DB-9 male connect to the receipt printer
Y-shape (provided by Printer vendor).

Step 3: Using another DB-9 female connect to SCB-C31A POS Data

Capture R232/Ethernet convertor with Null modem.

Note: There are two kinds of serial cable: Straight pass-through

and Null-Modem. The connection between SCB C31A POS
Data capture box and Y-cable must be null modem (in
package).

Step 4: Check the system switch of the SCB-C31A POS is switch to OFF,

OFF position.

Step 5: Connect power source with SCB-C31A POS.

Step 6: Connect SCB-C31A POS with internet port by RJ45 LAN cable.

SCB-C31A POS

Cash register

Printer

Null Modem

Y-cable

Ethernet

Provided by printer

F

F

M

M

F

Intelligent Surveillance Solution

System Introduction

page-5

The LED Indicators:
PWR LED: System is ready (Blinking).
LINK LED: Ethernet cable connection and data active.
RXA LED: Transiting/Receiving Indicator.
TXA LED: No option of SCB-C31A POS

Reset

Switch

Power

RS-232

RS-232

RJ-45

Intelligent Surveillance Solution

Software Installation

page-6

SOFTWARE INSTALLATION

SCB-C31 POS data capture convertor

Step 1: Use IE-browser to setup SCB-C31A POS, the default IP address is

192.168.1.1

Step 2: Setup IP address and password, and then setup IP address.
Note: Each time you switch the page of the web, please click

Save at first. If you leave this page without saving, all changes
will be ignored.

Step 3: Setup Password if needed. Password is only using to activate a

security feature on the serial server. Once a password is entered
it will be required to access the menu and make change of
configuration when access.

Note: Please write down the Serial number and MAC address,

these two parameters are necessary when user forget your
password.

Step 4: Setup according to your POS or Cash Register. Usually all

devices are default setting, you can reserve your time to pass
this step.

Step 5: Please restart/reset the box after changing configurations to

active setup.
To reset the unit manually apply power, insert a small plastic

Intelligent Surveillance Solution

System Introduction

page-7

tool, and press lightly depressing reset located between the
switch (refer page 5). Hold for 3 seconds and release. The Link
and Run light will go out and turn back on. The SCB-C31A POS
will revert to the last setting.

Note: Every time you change the configuration of SCB-C31A

POS, please check the above settings, especially maximum
connection and Remote IP address to avoid connection fail.

Connection via COM Port

Please install system according to following diagram:

Connection via TCP Client

Please install system according to following diagram:

NUUO NVR/DVR/Hybrid system installation

Please refer to the Main Console user manual to complete system
installation with the NVR/DVR/Hybrid systems installation CD.

Intelligent Surveillance Solution

System Setup

page-8

SOFTWARE SETUP

1. Metadata Device Management

Each NUUO Main Console system can manage up to 64 Access control,
64 License Plate Recognition and 64 POS cash register devices. This
section will teach you how to setup configuration of your system.

Run Main Console and click on Metadata Application from the

Config menu to open the Metadata Application window.

You are able to Insert/Delete/Configure Metadata devices in this window.
Click on any device under the Metadata Tree to configure the settings
and tag filter of the device. Associated cameras will be shown in the
preview window below.

Metadata

Tree

Associated

Cameras

Intelligent Surveillance Solution

System Setup

page-9

1.1. Insert/Delete/Configure Metadata devices

To insert a metadata source

1. Click the Insert button when the Metadata tab is selected

to open the Metadata Source Setting window.

2. Configure metadata source info, including Name, Metadata Type,

Source Type, IP address and Port.
Note:
For Metadata Type POS, there are 4 source types available
including SCB-C31, SCB-C31_A, COM Port and TCP Client.

3. After setting, click Test Connection to test Metadata source

connection. If all the settings are correct, the system will popup
“Metadata server “name (IP)” is available” message to confirm the
setting is successful.

To insert a metadata channel

1. Click the Insert button when any Metadata Source tab is

selected ( , or ) to add a

metadata channel.
Note:
For Metadata Type Access Control, you may add several metadata
channels under one source. Please define each Door Name exactly
the same as your settings under the third party Access Control system.
For Metadata Type LPR, you may add several metadata channels
under one source. Please define each Lane Name and make sure
settings under the third party LPR system are exactly the same.

Intelligent Surveillance Solution

System Setup

page-10

To configure settings and tag filters for each metadata channel

1. The Settings and Tag Filter section will be available when any of the

Metadata Channel tabs (Access Control , POS or LPR ) is

selected.

Settings

Record Metadata Transaction:

Select this checkbox to record metadata transaction data in MS
database. The MS data will allow searching and display on
associated recording video, and the MS data files can also provide
third-party application to analysis.

Display on Video preview:

Select this checkbox to display metadata transaction data overlay on
associated camera live videos.
There are two options regarding transaction data display:

Settings

Tag Filter

Intelligent Surveillance Solution

System Setup

page-11

Choose Always Display to keep transaction data on video until the
next transaction data is received.
Choose Last for ___ seconds to customize the period of time you wish
the transaction data to last on the video.

2. Select Tag Filter (For details on the Tag Filter, refer to page 11).

3. Under Associated Cameras, check to select cameras you wish to

display with metadata transaction data overlay on live video.

4. In Display Region Definition option, setup display area for each

camera video.

a. Default: The default display area is below the camera OSD, on

the upper-left corner.

b. User Define: Right-click on video preview and drag a rectangle

to define the display area.

5. Click OK to save.

To delete a metadata source/channel

1. Choose metadata source/channel.

2. Click Delete button to remove this metadata source/channel

from the system.

To configure metadata source/channel

1. Choose metadata source/channel.

2. Click Configure button to open Metadata Source Setting

window.

3. Please refer to Insert metadata device section (page 9) to modify

configuration.

1.2. New/Edit/Delete/Import/Export Tag Filter

Raw transaction data received from metadata systems must be filtered to
make it comprehensible. NUUO also provides a simple default tag filter
that filters out common EPSON commands. Users can edit other
customized filters based on this default tag filter.

Intelligent Surveillance Solution

System Setup

page-12

To add a new Tag Filter

1. Click on the New button to open the Tag Filter window.

This window includes the following sections:

a. General: Setup Tag Filter name. Connect button for test

connection.

b. Original Data: Show original transaction data from POS device.

c. Filtered Data: Show filtered data after defined filter.

d. Filtered Function buttons: Tool used to define filter type.

e. Filter List: A list of all filters.

f. Data tools: Includes import/export buttons to import/export

original binary data, and a clear button to clear original/filtered
data windows.

g. Filter tools: Includes upper/down tool to arrange priority of each

filter, or remove filters from list. You may also edit existing filters or
add new ones.

h. Encoding: Choose desired language.

i. Transaction Timeout: Define a maximum time length for

transactions to end when no more data is received.

General

Original

Data

Filtered

Data

Filtered Function

Filter List

Data Tools

Filter Tools

Encoding

Transaction

Timeout

Intelligent Surveillance Solution

System Setup

page-13

2. Enter name of tag filter.

3. Click Connect button to capture metadata transaction data from

metadata device.

4. Please operate metadata device to send transaction data to filter.

The original transaction data will show on the left window.

Note: If you don’t want the data to keep importing when editing

filters, please click the Disconnect button to stop connection.

5. Data Tools:

Export: Capture and export original Binary data

Import: Reload exported Binary data.

Clear: Remove data form Original Data and Filtered Data windows.

6. Start to edit tag filters:

Click and highlight text from Original Data window, then use the six

buttons below to define filters. The filtered transaction data will

show on the right window.

a. Omit: Neglect the selected text which is meaningless or not

important. The text will disappear in the filtered data window
on the right.

b. Substitute: Use other words to replace the selected text. The

system will pop up a substitution panel for replacing desired
words. The text on the filtered data window will show the result.

c. Add New Line: Define the selected text as the symbol for

changing to a new line. The result will show on the right filtered
data table.

Intelligent Surveillance Solution

System Setup

page-14

d. Start: Define the selected text as the symbol for the beginning of

a transaction. It will be replaced as a line as shown below.

Note: This setup is also used as detection tag for Smart Guard to

detect Transaction Start event.

e. End: Define the selected text as the symbol for the end of a

transaction. It will be replaced as a line as shown below.

Note: Not defining a transaction end may result in error or lost

info. If you do not define this filter please be sure to define a
transaction timeout. For more info please refer to p.15.
This setup is also used as detection tag for Smart Guard to
detect Transaction End event.

f. Cash Register Opened: Define the selected text as the symbol

for cash register opened. The filtered data will show the <Cash
Register Open> mark as below.

Note: This setup is also used as detection tag for Smart Guard to

detect Open Cash Register event.

7. Filter Tools:

The buttons are used to change priority of sub filter criteria.

The filter will operate by order of list; the filters on top will take effect

Intelligent Surveillance Solution

System Setup

page-15

first. The button will remove the filter from this list. Click on

Edit / Add to configure tag filters or add new ones.

8. Click on OK to save configuration.

Note: If codepage of POS printer is different with Windows OS, please

correspond with POS printer to setup Encoding option.

If there is no defined Transaction End event, please define a maximum
time length for transactions to end when no more data is received.

To Edit Tag Filter

1. Select Tag Filter name from drop-down menu,

2. Click Edit button

3. Configure the Tag Filter window.

4. Click OK to save configuration.

To Delete Tag Filter

1. Select Tag Filter name from drop-down menu,

2. Click Delete button

To Import/Export Tag Filter

1. Click Import/Export button and select Import/Export URL.

2. Click Open/Save to Import/Export Tag Filter.

Intelligent Surveillance Solution

System Setup

page-16

3. After importing tag filters, users can simply select a tag filter from the

drop-down menu without editing a new one.

1.3. Setup metadata Display Font

This option allows to setup font of metadata transaction data on video.

1. Run Main Console, click on

Metadata Application from

Config menu to open Metadata

Application window, then switch to
Display tab.

2. For metadata transaction data

displayed overlay video, select the
font, font size, font color and any
font effects user wants.

Intelligent Surveillance Solution

System Setup

page-17

2. Smart Guard Detection

2.1. Metadata Event

Each Metadata System has four to five Event types:

Transaction Start - Detect any transaction beginning
Transaction End - Detect any transaction ending
Open Cash Register - Detect any cash register opening

(Only available on POS metadata devices)

User Defined - Detect any condition which is defined by user

Connection Lost – Detect any connection abnormal event

between the metadata and Main Console systems.

Note: First three events require a pre-defined detection tag, please

refer to Edit Tag Filter section (see page 13).

To add a new Metadata Event

1. Select metadata device ( , or )from device tree.

2. Click on button to open Select Event Window.

3. Select Event Type.

4. Setup basic option of Event.

Intelligent Surveillance Solution

System Setup

page-18

a. Enable Event: Check the box to activate.

b. Life Cycle:

 Manually cancel event or event last triggered:

The alarm/action will continue until being canceled from Main
Console (Start>Open Event Report>Cancel All Events). The
user currently not at the seat watching the screen will be
notified by the alarm.

 Cancel event after ___ seconds:

Enable checkbox and setup the timeout seconds to cancel
the event after the time that you set whether the events
disappear or not.

c. Activated Period:

 Always Activated:

Allow alarm to be activated at all times.

 As Day Mode Schedule

Customize a specific time range for the alarm to be activated.
The alarm will be available daily according to your settings.

Click on Day Schedule to configure the schedule.
Choose Add Time Period and drag on the coverage bar to
define an activated schedule.
Choose Remove Time Period and drag on the coverage bar
to subtract from existing schedules.
Click on Clear All to remove all settings.

Intelligent Surveillance Solution

System Setup

page-19

 As Week Mode Schedule

Customize a weekly based time range for the alarm to be
activated.

Click on Week Schedule to configure the schedule.
Choose Add Time Period and drag on the coverage bar to
define an activated schedule.
Choose Remove Time Period and drag on the coverage bar
to subtract from existing schedules.
Click on Clear All to remove all settings.

5. Setup advanced option of User Defined Event.

a. Event name: Enter the name of user defined event.

b. Alert Condition:

 Text:

Enter the text user wants to detect in Keyword column.
Enable Match case to search for names where the case
matches the letters you entered. Or enable Match whole
word to search for the terms you entered as a whole word.
Check Using Regular Expression to include regular expression
commands in search.

 Numeric value:

Enter a number as the condition of event and then choose
one of the symbols ( ≦ ＜ ＝ ＞ ≧ ) to define the numeric

value.

Intelligent Surveillance Solution

System Setup

page-20

For advanced settings, use Prefix text/Postfix text to detect
special text before/after the value’s condition.
For Example: To detect Coke > 100 US, please insert as below:

Note: The value is also case sensitive, you must key in “,”
symbol to search for 10,000US.

 External rule:

This feature allows developers to customize event rules. Main
Console can send filtered transaction data to third-party
applications and receive reply on whether to trigger alarm or
not. Please contact [e-mail] for details.

Intelligent Surveillance Solution

System Setup

page-21

c. Frequency:

 Count:

Alarm will be triggered when this event happens over specific
number of times.

 Count Period:

Resets count after each new transaction, or under specified
period of time.

To Copy Event to other Metadata Devices

1. Right-click on metadata event which you want to copy.

For example, click , and select copy.

2. Switch to other metadata devices where you want to post event.

Right-click on metadata device, and select post.

Note: IF you want to copy metadata event to all devices, simply

select copy to all of right-click menu on step 1.

2.2. Instant Action on Metadata Event

Each metadata event can be configured to trigger 9 instant response
actions:

On Screen Display - A red warning message will be flashing on the

screen of associated cameras.

Play Sound – Play sound warning.
Send E-mail - Send E-mail with event type, time, and snapshot of

first associated camera.

Phone Call – dial pone call.
PTZ Preset Go – Control PTZ camera move to a preset point or patrol

around preset points.

Signal Digital Output - Triggers traditional alarming output devices.
Send a SMS message - Send a SMS message with event type and

time.

FTP – Upload snapshot of first associated camera to FTP.

Popup E-Map on Event – Auto popup E-map window to show

metadata device location.

Note: For detailed configuration please refer to Chapter 4.2 - the

Action section of Main Console user manual.

Intelligent Surveillance Solution

System Setup

page-22

3. Playback

To enable metadata overlay option

1. Click to open Setting window, and then switch to Metadata

tab.

2. Check the box of Enable Metadata overlay, the transaction data

will be overlaid on associated camera’s recording video.

3. Set up overlay configuration; select the font, size, font color and

any font effects user wants.

4. Setup option of Display on Video Preview to display metadata

transaction data overlay on associated camera live videos.

Always Display: To keep transaction data on video until the next

transaction data is received.

Last for 10 seconds: Each transaction data is displayed to last on

video for 10 seconds.

4. Remote Network Service

NUUO systems allow users to access metadata info on remote sites.

To Start Network Service of Main Console

Intelligent Surveillance Solution

System Setup

page-23

1. Open Config menu and click Network Service to open Network

service window

2. Switch to Live Streaming tab.

3. Setup the options of connection and then click start to allow

remote view metadata transaction with live video.

Note: Port 5150 is used when connecting via NUUO Remote Live

Viewer application. Web server port 8080 is used when
connecting via IE-browser. Please refer to chapter 5.14 - Network
Service section of Main Console user manual for details.

4. Switch to Remote Playback tab.

5. Setup the options of connection and then click start to allow

remote access on database of metadata transaction.

Note: Port 5160 is used when connecting via NUUO Playback

application. Web server port 8080 is used when connecting via
IE-browser. Please refer to chapter 5.14 - Network Service section
of Main Console user manual for details.

Intelligent Surveillance Solution

Operation Tool

page-24

OPERATION TOOLS

1. Live Display

To Display Metadata Transaction Data Overlay

1. Enable Display on Video Preview option.

Please go to Main Console > Config > Metadata Application >

select metadata channel and check the box of this option.

2. Select Associated Cameras.

In Associated Cameras setup region, select cameras to overlay

metadata transaction data. Click OK when you’re done.

3. View the Live Video with metadata transaction data

After setup, the transaction data will show on live video when

transactions happen.

Intelligent Surveillance Solution

Operation Tool

page-25

2. Log Viewer Search

Log Viewer is a tool used to search Unusual Events (Smart Guard
Events), System Logs, Counting Application results, and Metadata Logs
(Metadata Event Logs). For detailed description, please refer to
chapter 5.12 - Log Viewer section of Main Console user manual.

Note: If you want to search the transaction data, please use Metadata

Search tool on the next section - Metadata Transaction Data Search
on page 27.

To Search Metadata Event via Main Console

1. Run Main Console, click on Log Viewer from Config menu to

open Log Viewer window, and then switch to Metadata Log tab.

2. Select Log Type and Metadata device from drop-down menu.

3. Setup time criteria to search for special Date or a period of

Date&Time.

4. Click on Search, and search result will list on table.

Note: If you want to copy the search result to other application, simply

click on Export to… button to save result as an excel table.

Note: A link ( ) will appear next to each event time where video is

available. By clicking on the link, an instant playback window will pop
up to show recorded video.

Intelligent Surveillance Solution

Operation Tool

page-26

To Search Metadata Events via Playback

1. Run Playback, open record to select the video period, and click

Log Viewer button to open Log Viewer window.

2. Follow the step 2-4 on previous section to search metadata Log.

3. Double-click on metadata log from result table, and the video will

auto switch to the time of metadata log.

For Example: When clicking on a specific log from the list, the video

will auto switch to the time point the event happened.

Intelligent Surveillance Solution

Operation Tool

page-27

3. Metadata transaction data Search

Metadata Search tool is used to search key words of all transaction
data. To open this tool, please go to Main Console > Config >

Metadata Search. Alternatively, from Playback, click on to open

Date Time Search Dialog, and then click on button.

In Metadata Search Dialog, please follow the steps blow to search
from metadata devices, Date Time Period, or special keywords.

1. Check the box of metadata devices from the metadata list.

2. Setup Start Time and End Time in Data Time Period section.

3. Enter keyword you want to search.

Note: This search is case sensitive, you must key in “,” symbol to

search for 10,000US.

Note: Check Regular Expression to include commands in search.

4. Click Search button, Transaction table will show results.

5. Select items from Transaction table, the whole transaction detail will

show in right-down table and the record video of first associated

camera will show in right upper corner.

6. Check the box of Search within result and enter keyword, it will

search again within the results.

Intelligent Surveillance Solution

Operation Tool

page-28

4. Playback video with metadata data

To view recorded video with metadata transaction data, please check
you have enabled the metadata overlay option (refer to page 22). If you
have started this option, the system will auto overlay transaction data
when playing recording video. Below are two modes to select video
period.

To select Period by metadata search

1. Click on Playback application to open Date Time Search Dialog,

and then click on button

2. Follow above section 3 metadata Transaction data search to

search.

3. Select the transaction data for result list, and click OK.

4. The period you select from metadata search result will be

automatically selected.

5. Click OK to go back to Playback application.

To select Period by Date&Time

1. Click on Playback application to open Date Time Search Dialog.

2. Setup Start Time on Date Time Period setup panel, or directly

left-click and drag to select period from Time Table.

3. Click OK to go back to Playback application.

Intelligent Surveillance Solution

Operation Tool

page-29

5. Backup video with metadata data

There are three ways to backup video with metadata transaction data
under NUUO’s system.

To backup via Main Console

1. Open Config menu and then click Backup to open backup

system window (For details, please refer to chapter 5.13 - backup

section of Main Console user manual).

2. Click on to select data time periods you want to backup.

The period will be listed on the table after clicking OK. Click

to open the Backup option window.

3. Select the location where you want backup to.

4. Select which databases you want to backup.

a. Event Log: The database of smart guide detected metadata

and Camera Events.

b. System Log: Including recycle, start/stop/modify schedule and

network service logs.

c. Counter Log: Database of Counting Application.

d. Metadata Transaction: The database of metadata transaction

data.

5. Check to include Playback application with your backup.

6. Click OK to backup.

Intelligent Surveillance Solution

Operation Tool

page-30

To backup via Backup System

1. Click on Start > All Programs > NUUO Surveillance System >

NUUO Backup System to open NUUO Backup System window.

2. Following above step 2-5 on backup on Main Console to backup

video with metadata transaction data.

To backup via Playback

1. Start Playback Application and use Open Record tool to open

video you want to backup.

2. Click Backup to open backup dialog.

3. Check the period and cameras are what you want to backup.

4. Setup the location where you want to backup to.

5. Select which database you want to backup with.

6. Click OK to start backup.

Intelligent Surveillance Solution

Operation Tool

page-31

General Setting

6. Remote Access

NUUO systems have three remote tools to remote access metadata data:
NUUO Remote Live Viewer application tool, Playback application tool,
and web browser. Accessible functions are in general same as launched
from the local machine (please refer to chapter 3.2 - metadata
Transaction Data search section on page 27).

Note: Before using any of the remote access tools, please make sure the

network service of Main Console has been started (please refer to
chapter 4 - Remote Network service on page 23).

Remote Access via Remote Live Viewer Application

1. Click General Setting to obtain LiveView Setting dialog.

2. Select “Server” to open Server Setting window.

3. Setup Server Name, Address, Port, User Name.

4. Click on Test Server button to test the setup of server and

connection is available.

5. Click Add button to add new server site to list, and then, click OK to

save configuration.

6. Click on “metadata” setting to open Metadata Setting window.

7. Select “Enable metadata overlay” option to adjust OSD settings of

metadata information on monitor view.

Intelligent Surveillance Solution

Operation Tool

page-32

8. For metadata transaction data displayed overlay video, select the

font, font size, font color and any font effects user wants.

Note: The status of metadata overlay will be the same with the one in

Main Console. Go to Main Console> Config > Metadata Application to
check if “Display on Video Preview” is enabled first, then the metadata
Overlay function could be enabled.

Remote Access via Playback Application

1. Go to General Setting – Setting – Server to open Remote

Playback Site Management window.

2. Setup Server Name, Address, Port, User Name

3. Click on Test Server button to test the setup of server and

Intelligent Surveillance Solution

Operation Tool

page-33

connection is available.

4. Click Add button to add new server site to list, and then, click OK to

save configuration.

5. Click icon on the top of the Open Record window to

access the Remote Playback Site.

6. Follow the step on chapter 3.2 - Metadata Transaction Data search

section on page 27 to search metadata transaction data.

Remote Access via IE-browser

1. Open an Internet Explorer browser and enter the IP address or DDNS

name of the server followed by the connecting port.

Example: http://169.254.54.171:8080/

2. Select Remote Live Viewer / Remote Playback to launch option.

3. Follow above Remote Access section to view metadata transaction

data with live video(s), or play recorded video(s) with metadata

transaction data.