NuTone 8110 User Manual
Architectural & Engineering Specifications
March 2004
Pull Chain
Wall Fan
MODEL: 8110 SERIES
DESCRIPTION
• For maximum efficiency in larger kitchens up to
275 sq. ft. or other rooms up to 685 sq. ft.
• Sleeves telescope to exact wall thickness and plaster
line, adjustable from 5" to 10".
• Choose white (Model 8110WH) or silver anodized
aluminum (Model 8110SA) grille.
• Wall panels and shutters of steel with baked-on enamel
for long-lasting protection.
• Install in 11
1
⁄8" diameter opening in existing wood
or masonry walls.
• Motor quietly drives electronically balanced fan blade.
• Quick-mounting motor assembly screws to three studs
on sleeve.
• Choice of wiring knockouts for fast wiring connections
in pre-wired outlet box with built-in receptacle.
• Built-in switch operates from high-test stainless steel pull
chain. Outside shutter closes tight for positive weather
seal.
• Grille installs with thumbscrew.
DESIGN FEATURES
Air Delivery: 550 CFM at 0.03" S.P.
Sound Level: 6.0 Sones.
Dimensions: Sleeve: 113⁄4" diameter with plaster
flange, 10
3
⁄4" ID.
Outside Wall Panel: 13
3
⁄4" sq. x 11⁄4"
deep including wall mounting flange.
Material & Finish: Housing: Galvanized steel.
Grille: Aluminum, Silver Anodized
133⁄4" sq. x 11⁄4" deep.
Motor: Plug-in, thermally protected.
Fan Blade: Aluminum, 5-leaf.
Electrical Rating: 120v, 60Hz, 1.1Amp
ARCHITECT'S SPECIFICATIONS
Pull Chain Wall Fan (s) shall be Model 8110SA with
Silver Anodized Alluminum Grille or Model 8110WH with
White Metal Grille as manufactured by NuTone according
to listed specifications. Fan shall ventilate at 550 CFM at
0.03" S.P. at a sound level of 6.0 Sones. Unit shall be
equipped with telescoping wall sleeve adjustable from 5" to
10".
CERTIFIED TEST DATA
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed by the
Home Ventilating Institute, for off-the-shelf products, as
they are available to consumers. Product performance is
rated at 0.1 in. static pressure, based on tests conducted in
AMCA's state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based on
laboratory measurements. This NuTone model is listed by
Underwriters' Laboratories Inc.
8110
INSTALLATION
• Installation instructions included with each unit.
• “A” unit and “B” unit are packed in a master carton to
permit installation of each assembly as required. “A” unit
installs in 111⁄
8
" diameter opening in wood or masonry
walls during rough-in or in a finished wall.
• The outlet box, removable for installation behind plaster
or drywall, features three (3) knockouts to permit wiring
from above or below the unit. The outlet box and switch
are prewired at the factory; connect house leads to
complete the wiring connections. Installation Instructions
are included with each unit.
• Install at least 5 feet above floor or install above counter
or major appliance.
DIMENSIONS
TYPICAL INSTALLATIONS
133⁄4" SQ.
FAN HOUSING
SQUARE
PANEL
PLASTER
LINE
ROUND
OPENING
IN WALL
BRICK WALL
WOOD WALL
10
3
⁄4"
11
3
⁄
4
"
PULL CHAIN
OUTLET
BOX
7
⁄
8
" KNOCKOUT
ADJUSTABLE
SLEEVE
1
1
⁄4"
OUTSIDE WALL
PLATE
SHUTTER
13
1
⁄2"
13
1
⁄2"
5" TO 10"
MOTOR ASSEMBLY
MOUNTING
BRACKET
PLUG-IN MOTOR
ASSEMBLY
10" BLADES
SQUARE
PANEL
PLASTER
LINE
ROUND
OPENING
IN WALL
Product specifications subject to change without notice.
NuTone, Inc., 4820 Red Bank Road, Cincinnati, Ohio 45227
Printed in U.S.A.
Loading...