NuTone 765H80L Specifications

MODEL 765H80L HEATER / FAN / LIGHT
SPECIFICATION SHEET
FEATURES
GRILLE:
Bright white grille
Snap-in light diffusing lens for 14W (max.) A19 shape,
E26 base LED bulb (bulb not included)
VENTILATOR:
Resilient anti-vibration mounts
Plug-in, permanently lubricated motor
Low sound, high performance blower wheel
HEATER:
1300 watts, with metal blower wheel for efficient, even
heating
Plug-in, permanently lubricated motor - functions
independent of ventilator
HOUSING:
Adjustable mounting brackets span up to 24"
Polymeric damper/duct connector with 2" long tapered
sleeve and no metallic clatter
Compact 23 gage corrosion resistant steel housing finished
with powder coat paint
NOTE: For installation in ceilings up to 12/12 pitch
Suitable for use in insulated ceilings (Type I.C. - Thermally
protected)
Use supply wiring rated for at least 90°C.
Light turning off or blinking may indicate an improper lamp
wattage or type.
TYPICAL SPECIFICATION
Combination unit shall be NuTone Model 765H80L.
Unit shall have corrosion resistant steel housing finished in powder coat paint and adjustable mounting brackets.
Unit shall be rated to handle an A19 shape and E26 base LED bulb, 14W (max.).
Fan, heater and light shall be separately controllable. Motors shall be permanently lubricated.
Air delivery shall be no less than 80 CFM and sound level no greater than 2.0 Sones. All air and sound ratings shall be certified by HVI.
Units shall be U.L. Listed.
Suitable for use in insulated ceilings. (Type I. C. - Thermally protected)
Broan Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
02C 1101274D
PERFORMANCE RATINGS
STATIC
MODEL VOLTS AMPS WATTS*
765H80L 120 11 1300 0.10 80 2.0 4-IN. ROUND
*Total connected load
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.
PRESSURE
CFM SONES DUCT
(PS)
0.25 68 4-IN. ROUND
MODEL 765H80L
0.5
0.4
0.3
0.2
0.1
STATIC PRESSURE (IN. WG)
0
0 10 20 30 40 50 60 70 80 90
AIR FLOW RATE (CFM)
Broan Hartford, Wisconsin www.nutone.com 888-336-3948
Loading...