Add lighting and ventilation to your room with the look of an ordinary recessed light.
Recessed Fan / LED Light
FEATURES
BAFFLE:
Polymeric construction with matte white finish
•
Recessed styling, mounts flush with finished ceiling
•
Optional brushed bronze and brushed nickel trim rings included
•
LAMP:
Uses BR30-shaped, 3500K, 9.5W, high efficacy, dimmable, LED lamp with E26
•
base (included)
BLOWER:
Plug-in, permanently lubricated, motor
•
Dynamically balanced centrifugal blower wheel for quiet, efficient performance
•
Low RPM for quiet operation
•
Selectable CFM - Factory-set at 50 CFM - Can be set to 80 CFM
•
HOUSING:
Fits in 2" x 8" construction
•
Rugged, galvanized steel construction
•
4" round, polymeric duct connector with 2" tapered sleeve and no metallic
•
clatter
Adjustable mounting brackets span up to 24"
•
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of accessories to effectively adapt
this fan to your construction requirements.
LUTRON DIMMERS *: (purchase separately)
CTCL-153P-WH, CTCL-153PDH, SCL-153P, MACL-153M, MACL-153MR-WH,
TGCL-153PH-WH
LEVITON DIMMERS *: (purchase separately)
DDMX1-BLZ, 6672, 6674-P0W, IPL0610Z
Dimmer compatibility list indicates those dimmers that have been tested and oper-
*
ate properly under normal conditions. Each application is unique and various factors
such as load, common neutrals or other electrical products on the circuit can, in
certain instances, cause variance in system performance. Consult dimming system
manufacturer for additional support in operation.
UL Listed for use in insulated ceilings (TYPE I.C.)
UL Listed for use over bathtubs and showers when connected to a GFCI protected
branch circuit (ceiling mount only).
3-Year Warranty
SPECIFICATIONS
MODEL VOLTS AMPS**
744RNL 120 0.4
SETTING
80
50
STATIC
PRESSURE
0.1 80 2 27.4
0.25 65
0.1 50 0.3 10.7
0.25 35
REFERENCE QTY. REMARKS Project
** Total
Connected
Load
CFM SONES
FAN
WATTS
DUCT
4" Round
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
AIR FLOW PERFORMANCE
0.350
0.300
0.250
0.200
0.150
Static Pressure
0.100
O - I nches of Wate r Gauge)
2
0.050
(in. H
0.000
0 10 20 30 40 50 60
0.450
0.400
0.350
0.300
0.250
0.200
Static Pressure
0.150
O - I nches of Wate r Gauge)
0.100
2
0.050
(in. H
0.000
0 10 20 30 40 50 60 70 80 90 100
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and
procedures prescribed by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product performance is rated
at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test
laboratory. Sones are a measure of humanly-perceived loudness, based on
laboratory measurements.
Architectural & Engineering Specifications
February 2019
MODEL 744RNL
MODEL 744RNL - 50 CFM SETTING
Air Flow (CFM - Cubic Feet per Minute)
MODEL 744RNL - 80 CFM SETTING
Air Flow (CFM - Cubic Feet per Minute)
Location
Architect
Engineer
Contractor
Submitted by Date
91E 1100972C