NuTone 744nt User Manual

DESCRIPTION
TRIM RING BAFFLE:
Polymeric construction with matte white finish
• Recessed styling, mounts flush with finished ceiling
• Accepts any one of these bulbs (bulb not included):
• 75W, R30, BR30, PAR30L, or PAR30LN
BLOWER:
Plug-in, permanently lubricated, motor
• Dynamically balanced centrifugal blower wheel for quiet,
• efficient performance
Low RPM for quiet operation
HOUSING:
Rugged, 26 gage, galvanized steel construction
• 4" round, polymeric duct connector with 2" tapered sleeve
• and no metallic clatter
Adjustable mounting brackets span up to 24"
CONTROLS: Designed for use with this product (purchase
Model VS-96 - One rocker switch with "on" indicator light - fits
• single outlet box
Model VS-86SN - Two rocker switches - fits single outlet box
• Model VS-66WH - 60-minute timer for fan and rocker switch
• for light - fits two-gang outlet box
Model VS-68WH - 15-minute timer for fan and rocker switch
• for light - fits two-gang outlet box
U.L. Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit and used with a PAR30L or PAR30LN bulb. U.L. Listed for use in insulated ceilings (TYPE I.C.)
separately)
Architectural & Engineering Specifications
Recessed
Light / Fan
MODEL 744NT
SPECIFICATIONS
VOLTS AMPS WATTS* SONES CFM DUCT
120 1.2 125** 1.5 70 4" Round
* Total Connected Load
** BR30-size bulb.
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the
Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.
Home Ventilating
INSTALLATION
Complete installation instructions are included with each Recessed Light / Fan.
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)
REFERENCE QTY. REMARKS Project
ARCHITECT’S SPECIFICATION
Light / Fan shall be NuTone Model 744NT as manufactured by
• NuTone according to specifications listed:
Light / Fan shall have corrosion resistant steel housing and
• adjustable mounting brackets.
Motor assembly to be removable and permanently lubricated.
• Non-metallic damper/duct connector to be included.
• Light / Fan to operate separately (or in combination).
• Light / Fan must use an R30 / BR30 Max. 75W bulb (PAR30L or
• PAR30LN Max. 75W bulb for use over bath tub and shower) -
recessed into ceiling. Air delivery shall be no less than 70 CFM and sound level no
• greater than 1.5 Sones. All air and sound ratings shall be certified
by HVI. Light / Fan must be U.L. and cU.L.listed for use in insulated
• ceilings (Type I.C.) and for use over bathtubs and showers when
connected to a GFCI protected branch circuit and used with a PAR30L or PAR30LN bulb.
Location Architect Engineer Contractor Submitted by Date
50F 99043395C
Loading...