NuTone 742SNNT, 742WHNT, 742RBNT User Manual

DESCRIPTION

LIGHT FIXTURE:

• Corrosion resistant finish
Satin nickel finish (Model 742SNNT)
Painted white finish (Model 742WHNT)
Oil-rubbed bronze finish (Model 742RBNT)

• Frosted melon glass shade

• Close mount design

• Uses two 60 Watt maximum, type A, medium base bulbs. Bulbs
not included.

• Vent openings in fixture base for exhaust fan
Light fixture assembly is plug-in and removable

•

BLOWER:

• Plug-in permanently lubricated motor

• Polymeric blower wheel

HOUSING:

• Rugged, 26-gage galvanized steel construction

• Sturdy key-holed mounting brackets for quick, accurate installation

• Tapered, polymeric duct fitting with built-in backdraft damper for
easy, positive duct connection and no metallic clatter

NOTE: For installation in ceilings up to 12/12 pitch.
U.L. Listed for use in insulated ceilings (Type I.C.)

Use supply wiring rated for at least 90° C

Architectural & Engineering Specifications

July 2005

Decorative

Light / Fans

MODELS 742SNNT

742WHNT

742RBNT

SPECIFICATIONS

VOLTS AMPS CFM SONES DUCT

120 1.6 70 2.0 4" Round

HVI-2100 CERTIFIED
RATINGS comply with new
testing technologies and
procedures prescribed by
the Home Ventilating
Institute, for off-the-shelf
products, as they are

Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s
state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory
measurements.

available to consumers.

INSTALLATION

Complete installation instructions are
included with each Decorative Light / Fan.

NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)

ARCHITECT’S SPECIFICATION

• Decorative Light / Fan shall be NuTone Model 742SNNT
(742WHNT), (742RBNT) as manufactured by NuTone according
to specifications listed:

• Unit shall have galvanized steel housing with dual integral
mounting brackets. It shall be ducted to a roof or wall cap.

• Blower assembly shall be removable and have a permanently
lubricated motor.

• Light fixture assembly shall be plug-in, removable and include a
frosted melon glass shade and a corrosion-resistant base with
satin nickel (Model 742SNNT), or painted white (Model 742WHNT)
finish, or oil-rubbed bronze finish (Model 742RBNT).

• Lamps shall be two 60 Watt maximum, type A, medium base,
incandescent.

• Air delivery to be no less than 70 cfm and sound level no greater
than 2.0 sones. Air and sound ratings shall be certified by HVI.

• Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

50G 99043343B