Numark M1 Quick Start Manual
QUICKSTART GUIDE
ENGLISH ( 3 – 5 )
MANUAL DE INICIO RÁPIDO
ESPAÑOL ( 7 – 9 )
GUIDE D’UTILISATION RAPIDE
FRANÇAIS ( 11 – 13 )
GUIDA RAPIDA
ITALIANO ( 15 – 17 )
KURZANLEITUNG
DEUTSCH ( 19 – 21 )
2-CHANNEL MIXER
INTRODUCTION
Welcome to the M1 2-channel mixer. This device is perfect for the DJ who wants a great quality mixer at an
entry-level price. With a 2-band rotary EQ and gain plus several inputs (2 line, 2 phono, plus 1 mic), this
mixer is streamlined, sturdy, and easy to use. It’s sure to be the first of many Numark mixers you will own in
your DJ career.
We hope the M1 serves you well for many years to come.
Sincerely,
The People of Numark
BOX CONTENTS
M1
AC Power Adapter
Quickstart Guide
Safety & Warranty Information Booklet
REGISTRATION
Please go to http://www.numark.com to register your M1. Registering your product ensures that we can keep
you up-to-date with any last-minute product developments and provide you with world-class technical
support, should you run into any problems.
GROUND RULES
1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to “zero.”
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
• Audio input sources (i.e. turntables, CD players, etc.)
• Mixer
• Last, any amplifiers or output devices
10. When turning off, always reverse this operation by:
• Turning off amplifiers
• Mixer
• Last, any input devices
3
CONNECTION DIAGRAM
HEADPHONES
HOUSE AMP
TURNTABLE
GROUND
TURNTABLE
MICROPHONE
GROUND
CD PLAYER
4
CD PLAYER
REAR PANEL FEATURES
1. AC IN – Use the included power adapter
to connect the mixer to a power outlet.
While the power is switched off, plug the
power supply into the mixer first, then plug
the power supply into a power outlet.
Note: The mixer is designed to work with
the included power supply only. Using an
incompatible power supply could result in
damage to the unit.
2. MASTER OUTPUT (RCA) – Use standard
RCA cables to connect this output to a
speaker or amplifier system. The level of
this output is controlled by the MASTER
knob on the top panel.
3. LINE INPUTS (RCA) – Connect line-level devices, such as CD players, samplers or audio interfaces, to these
inputs.
4. PHONO INPUTS (RCA) – Connect phono-level devices, such as turntables, to these inputs.
5. GROUNDING TERMINAL – If you are using phono-level turntables with a grounding wire, connect the
grounding wire to these terminals. If you experience a low “hum” or “buzz”, this could mean that your
turntables are not grounded.
Note: Some turntables have a grounding wire built into the RCA connection and, therefore, nothing needs to be
connected to the grounding terminal.
1
55
GROUND
4342
3
GROUND
TOP PANEL FEATURES
1. POWER LED – Illuminates when the mixer is
on.
2. MASTER – This control adjusts the output
volume of the Program mix.
3. MIC GAIN – Adjusts the audio level of the
microphone signal.
4. CUE GAIN – Adjusts the level of the
headphone audio.
5. CUE SLIDER – Slide this to mix between
Channels 1 and 2 in the headphones. When
all the way to the left, only Channel 1 will be
heard. When all the way right, only Channel 2
will be heard.
6. CHANNEL GAIN – Adjusts the corresponding
channel’s pre-fader and pre-EQ gain level.
7. CHANNEL TREBLE – Adjusts the high
(treble) frequencies of the audio on the
corresponding channel.
8. CHANNEL BASS – Adjusts the low (bass)
frequencies of the audio on the corresponding
channel.
9. INPUT SELECTOR – Selects the input source
to be routed to the corresponding channel.
Input jacks are located on the rear panel.
10. CHANNEL FADER – Adjusts the audio level
on the corresponding channel.
11. CROSSFADER – Blends audio playing
between Channels 1 and 2. Sliding this to the
left plays channel 1 and sliding to the right
plays Channel 2.
Note: The crossfader is user-replaceable if it
should ever wear out. Simply remove the facepanel, then remove the screws holding it in position. Replace
the fader with a quality authorized replacement from your local Numark retailer only.
12. MIC INPUT – Connect ¼” microphones to this input. The microphone controls are located on the top
panel.
13. HEADPHONES – Connect your ¼” headphones to this output for cueing and mix monitoring.
6
7
8
99
10 10
12 13
11
2
3
6
1
7
8
4
5
5
INTRODUCCIÓN
Bienvenido al mezclador de 2 canales M1-2. Un dispositivo ideal para el DJ que desea un mezclador de alta
calidad al precio de un mezclador de nivel inicial. Con un ecualizador rotativo de 2 bandas y ganancia más
varias entradas (2 de línea, 2 fonográficas y 1 de micrófono) este mezclador es estilizado, robusto y fácil de
usar. Seguramente será el primero de los muchos mezcladores Numark que poseerá en su carrera como
DJ.
Esperamos que el M1 le brinde un buen servicio por muchos años.
Atentamente,
La Gente de Numark
CONTENIDO DE LA CAJA
M1
Adaptador de CA
Guía de inicio rápido
Folleto de información sobre la seguridad y la garantía
REGISTRO
Visite http://www.numark.com y registre su M1. El registro de su producto asegura que podamos mantenerle
actualizado con los desarrollos de productos de último momento y brindarle apoyo técnico de categoría
mundial en caso de que tenga algún problema.
REGLAS BÁSICAS
1. Asegúrese de que todos los artículos indicados en “Contenido de la caja" estén incluidos en la caja.
2. LEA EL FOLLETO DE INFORMACIÓN SOBRE LA SEGURIDAD Y LA GARANTÍA ANTES DE
UTILIZAR EL PRODUCTO.
3. Estudie el diagrama de conexión incluido en esta guía.
4. Coloque el mezclador en una posición adecuada para su funcionamiento.
5. Asegúrese que todos los dispositivos estén apagados y que todos los faders y perillas de ganancia
estén en posición «cero».
6. Conecte todas las fuentes de entrada estéreo como se indica en el diagrama.
7. Conecte las salidas estéreo a los amplificadores de potencia, bandejas de cinta magnética y/o otras
fuentes de audio.
8. Enchufe todos los dispositivos al suministro de corriente alterna.
9. Encienda todo en el siguiente orden:
• fuentes de entrada de audio (por ejemplo, giradiscos, reproductores de CD, etc.)
• el mezclador
• por último, cualquier amplificador o dispositivo de salida
10. Al apagar, realice siempre esta operación en sentido inverso:
• apague los amplificadores
• el mezclador
• por último, cualquier dispositivo de entrada
7
A
A
DIAGRAMA DE CONEXIÓN
GIRADISCOS
URICULARES
MPLIFICADOR DE AUDITORIO
GROUND
GIRADISCOS
MICRÓFONO
GROUND
REPRODUCTOR DE CD
REPRODUCTOR DE CD
8
Loading...